Related
Hi all,
I did a "Clear Storage" today on my MDA, and then reset it before it ran the T-Mobile rubbish.
I was left with an extremely clean device, but the T-Mobile settings were absent.
It would be nice to have this clean interface, but have the best dialer (Qtek version?), best voice command, and all the T-Mobile operator settings after a clean install.
Would it be possible to create 1 CAB file for t-mobile's settings (GPRS,MMS,SMS etc) to run after a hard reset?? Ultimatley leaving the MDA in a minimal state, with a smaller EXTENDED ROM??? :idea:
I dont know if this helps - but Ive kind of just done this using the new tmob rom in the xda ftp. Though I havent actually created a CAB.
The one in the xda ftp has a good set of stuff / different dialer etc, and the crappy tmobile branding isnt there either.
Though it does have a couple of things in it, eg the i-mate email program, that arent much use to me.
I updated to the latest tmob rom using the files in the XDA ftp space
Used Buzz's extended Rom unlocker to remove the unused customisation files (and that stupid backgammmon game
Hard reset again. And let it do the full thing, incl tmob customisations. I think all it adds is the network info.
Then went here : http://www.mphone.co.uk/mms_wap_settings_t_mobile.html
to get the GPRS settings, which were missing. Though other network / mms settings were fine.
Theres a bit of i-mate branding and that email prog in the progs list to ignore forever, but apart from that its sweet.
One other point though - this doesnt actually make the space used up by the extended ROM any smaller. Dont have a clue if its possible to change the partition size. Search the forum for that because if its possible its bount to be around here somewhere.
Though if you use the extended Rom unlocker again once youre all set up you can write to the free space in the extended rom if you want. SOme progs even give you the option to install there.
Extended rom you can 'crack' and use as disk storage, but you can't resize (yet - as far as I know, although please tell me otherwise if you can!)
For cab info, i'd suggest here: http://forum.xda-developers.com/viewtopic.php?t=32839
Very useful. I use exclusively t-mobile stuff, as it actually seems pretty good. for me, even running voice command, xcpuscalar and magic button in my startup, i kick off with 20-25mb free at startup, which is pretty good.
hth
Lost camera application
I have a brand new Exec (7 days old)
Having done a corporate install and then set up connections manually (I will try Dingo's connections CAB next time), I don't have a working camera - the spinning wheel goes round and round for a minute then reports missing components. Also, I have no MMS account in Messaging.
Can I install these components from a CAB without doing a hard reset and starting again? If so which CABs?
i just got my self an O2 XDA Orbit and i'm wondering what are the best apps and roms to have. i know it's a lil up to preference - i'm interested in the opinions out there. I already picked myself up copies of opera and cardexport 2 (i used the palm version and was very impressed). My main concerns is that i have previously been told that a firewall and a virus scanner were needed. Is this true?
Also i have read a lil bug the sd card issue. how do i know it has struck me? is the fix i have seen good?
i'd also love to be able to play fps games on the device when i am away. goes anyone know of any good review sites and/or shops? i also love playing GPL (general public license) games on my linux machine (no windows machines in this house. may have to, begrudingly, get a cheap laptop if i get problems with the device) so if there are any good free ones i will take a look.
I think that will cover it for now. if i get any more questions i will post and thanks for your thought guys and gals
if you feel progressive you'll start by joining the touchflo club using B&B4 rom (-->here<--). that might be a bit ...well, progressive.. if you just got the device, but hey, you got it for playing around like the rest of us, right?
before you flash a non-original rom to your device, make sure you read this thread. i recommend to ALWAYS use USPL before flashing something.
soardiac said:
if you feel progressive you'll start by joining the touchflo club using B&B4 rom (-->here<--). that might be a bit ...well, progressive.. if you just got the device, but hey, you got it for playing around like the rest of us, right?
before you flash a non-original rom to your device, make sure you read this thread. i recommend to ALWAYS use USPL before flashing something.
Click to expand...
Click to collapse
whats the difference between B&B4 and the official wm5 and wm6 roms? i do have the o2 wm6 update rom but i haven't installed it (coz i hadn't looked up how yet). so the phone is pretty much stock.
I bought the phone as a work tool but as i'm a techie and techie's get bored and wanna tweak stuff there is room for tweaking
The B&B4 ROM is WM6 but has extra features such as touchflo: like the HTC touch, certain finger movements make access to contacts, messages, music easier and finger scrolling like the iphone. It also has a much cooler look.
For WM6 and thus probably B&B4 there is a reg hack to reduce CPU usage: http://forum.xda-developers.com/showthread.php?t=308792
To put a new ROM on your device, It is recommended to flash with USPL unless it is from your manufacturer and for your country. USPL allows other ROMs to be downloaded without disabling your device. I could describe it as a sim-unlock for ROMs, if you use a sim from your carrier, all is good, if not, you cant use the phone. A little more serious than a simlock though, if you flash the wrong ROM without USPL, it could damage the phone/bootloader so as to make it a 'brick'.
To flash a ROM, make sure device has more than 50% battery. Soft-reset it and wait for it to load. Plug into usb port and wait for activesync to recognise. Run USPL and a command prompt will load, wait for it to finish (~5 mins). A new window will open with a picture of the device, tick boxes, click next then update... A progress bar will let you know how far the download has got to. Once complete, the device will reboot to wondows mobile. It is now temporarily CID unlocked with a SuperCID. Now run the exe for the ROM you wish to flash. The same kind of interface will appear as before, tick boxes, next, update... Watch progressbar eagerly (wipe drool off mouth) and let it complete. Your device will reset with new ROM.
If at any point a problem occurs, aslong as you see windows or a multicoloured screen (the bootloader) you can do this (whole) process again to complete installation.
Hope this rather messy post helps you out a bit. As to applications, somewhere on the FTP site I think is pocket doom. BEWARE: Some files on the FTP site are viruses, not detectable by antivirus software.
Pete
wicked and that leads me on to my Anti virus question. is that any anti virus tools for WM5/6? iirc i have seen some pc side ones that scan the phone if it's connected and the app is setup for it. also is a firewall advised? are there any?
There are a few antiviruses for PDAs, but TBH the only viruses I have heard of for them are proof-of-concept so I doubt anyone really bothers.
If you really want an antivirus, I've tried this before and it seems to be ok http://www.freewareppc.com/utilities/airscannermobileantivirus.shtml
When I mentioned viruses on the FTP site, I meant for your home PC!
oh right. i run linux so it's pretty much impossible to catch a virus infection. although i spose caution would be needed if i needed to install windows for something. i'm trying to install stuff straight to the device from the net atm using cabs and i have a tool that strips the cabs out of the exe files so all looks good there.
one question that has just crossed my mind (coz i just tried to do it and couldn't). Is there a way to install cabs once they have been save to the eeprom or memory card? i checked out "File explorer" for an option and didn't find one. "remove application's" seems to be remove only so, i'm a lil lost as to what to use. If i hit open in the d/l dialog in opera or PIE it installs them. Any tips?
You should be able to just tap them in flie explorer and they will run... You'll get a notification asking whether you want to run and then the usual installer screen will come up asking where etc...
i have to admit i didn't try that. i was thinking too far outside the box
thanks for all the help so far btw
No probs, I'm not an expert, computers and techy things just seem to come naturally to me!
same here but i'm known to have moments of thinking too abstractly and after using linux for so long i have kinda gotten used to having to think to get most of the things i do done.
i just saw some screen shots of B&B 4 and i do have to say "how good does that look?" i can't seem to find a feature list. i found it the other day. seems to have vanished in to the depths of the board tho. any clues?
Well I've got B&B4 and I must say It's probably the best ROM you can use on your Orbit... The black and blue go really well with the black and blue (duh) of the Orbit...
Heres the post for B&B4 with some screenies and the programs list: http://forum.xda-developers.com/showthread.php?t=321503
It's basically WM6 based, with TouchFlo making it a bit like an iphone where you can use your finger to scroll through stuff. Other finger friendly interfaces like the new today screen interface (with quick contacts access, programs, weather, time, phone profiles etc), htc audio manager, new skin for wmp, some very useful utilities, etc etc
Like WM6, and in the (edited) post I made earlier, you should carry out the reg hack to reduce cpu usage, other than that, and needing a separate cab for live messenger, it is _thebest_
If you decide to flash it, remember to use USPL...
i may do. i think i'm gonna check out my options first. i don;t wanna mess about with it too much because it is spose to be a tool for work. but seeingas realvnc works pretty well i think i'm pretty much covered for my objectives in the software department except for GPS software. money is no object there. i want the best. i heard tomtom was a bit unstable (from a treo 750w user) so if that's true i'm gonna stay away from it
Tomtom seems to work fine on mine so far ...
As a 'working' tool
I've tried all the flavours of roms out there - but didn't like the touchflo stuff on B&B4... I need my today screen to have my calendar and messages on it, so the big clock is no relevance, and the touch stuff is gimicky.
I'm running O2 WM6 on mine, with a few tweaks. It's definitely most stable, and quite fast, although I run batterymeter to overclock to 240-ish mhz for a bit more slickness.
I also use todayagenda to replace the calendar plugin as its far more useful.
I have a synchronisation with my corporate Exchange server for office mail, and route my personal mail throuh an excelllent free imap service at www.axigenmail.com - simple imap servers, no frills, works excellently.
TomTom 6.02 or 6.03 work absolutely fine, no issues whatsoever.
I've just started using SPB PhoneTools on my todayscreen to give me a decent quickdial in the car... I've just replaced my car stereo with a Sony MEX-BT2500 unit (£90 on ebay) that gives full bluetooth handsfree integrationand streaming with minimal fuss.
Hi all! This is my first time posting in here as I'm just now getting one of the "new" T-mobile Dash phones. I've been reading the different threads, especially the ROM threads, trying to figure out which is the most stable/usable.
I know my way around PDAs pretty well, having had an IPAQ 1945 and then a Dell Axim x30 (the 624 MHz processor one), which I still love and have with me constantly. But this new Dash will be my first smartphone and my first entry into the WinMo 6+ world.
I'm interested in hearing which ROMs you guys like and what are some of the good and bad with them. I've read the version changes and all of that, but there's nothing like reviews from the guys that use the software/hardware every day. Basically what I'm looking for in a ROM is:
1) WinMo 6.1
2) Updated radios for bluetooth and wi-fi (might as well have the hardware at its best if you've paid for it, right?)
3) SDHC compatibility (Anyone know what the largest size memory card is that the Dash (Excalibur) can read and fully utilize? I've heard 16 is the max.)
4) Stability. If the phone isn't constantly crashing, it'd be great. haha
So to all you Excalibur users: What ROM do you recommend and why?
Thanks all for your time and I'm glad to be joining the Excalibur community!!!
~Walter
Your best bet is to flash them all and see the ROM you like as best ROM there is none, it's down to personal preference, won't take more than 30 mins to get base set, with regards to SDHC all WM6.1 support 16GB "taken from other threadz" as i only have tryed 8GB.
Hope that helps.
i had used the 6.1 final from kavana, and flashed to the rose Rom by Ricky and Stylez last night. so far, i like the Rose rom the best. but like said, its all personal preference as to which is the best. and like Stylez sad, 16gb is what people say will work. i havent even tried anything over a 2gb yet lol
I tried the various 6.1 roms from this site and from my experiance with them, IMHO I think the Kavana 080408 WWE is the most stable and less laggy over the Rose 1.7 rom.
But I have to agree its all about personal opinion and what features you are looking for. Your just gonna have to try them out for yourself and decide wich one you like the most.
MY favorite improvement is that I can now use my 4gig SD over the 2gig I had to use with inMo 6, I was so dissapointed about that.
Thank you guys for the response. I'll start with the suggested ROMs and then work my way around to others.
I just got off the phone with t-mobile, my Dash should get here either tomorrow or Friday. I'm going to spend the whole weekend flashing ROMs and loading all my favorite software onto it! haha
Okay, a related question: I've been looking into Java games for the phone since it seems most of the ROMs on here have Jbed or Esmertec Java loaded on them. The games list phones they're meant to run on, but I know on my old Sony Ericsson phone I could run Java games that weren't meant for that device, but were compatible.
So are there any phones "like" the Excalibur that I should keep in mind when doing my Java game buying? (Like will games that work on the Blackjack II most likely work on my new Excalibur?)
Thanks again!
Help please!
I thought I will use this thread since I am new to the Dash too.
I just got a couple of easy questions. I tried to look here and even on Google, but I either suck at searching or the answers I am looking for are not there.
I read the wiki on how to flash and I read that: If necessary, unlock your phone using either the SDA Application Unlock program or Surreal Networks' AppUnlock or both. This will enable third-party software installation. Not performing this step properly is the primary reason why Error 270 happens.
So, either or? The reason I ask is because I would do both just to be safe, but SDA unzips fine but Surreal does not. When I unzip it, it copies the files that are in the zip in the folder I chose to unzip them into. Do I have to do both? And if so whats wrong and how do I fix this. Same thing happens for other supposed CAB files I downloaded. They just copy themselves but don't "change" into one cab file to be installed. Same happens with tegic.
romupdateutility.exe... where do I find it and what is it? I saw all the videos possible about flashing Kavana's and even Jamerican doesn't use this.
Is it true that if I update to Kavana I will not be able to use MMS and the Internet or are those an older update problems? The new 6.1 works flawlessly correct? (I saw a thread on how to fix the sms, mms, and web problem) Where can I find an original uncooked WinMo 6.1 update?
It doesn't seem hard to flash, but I am a newbie to this smart phones WinMo stuff. My Dash, I got it yesterday and I already run low in memory. I closed all the apps and I still only have 7.212 Kb of memory! That sucks! I hope WM 6.1 is better because WM 6.0 is not good.
Captain Totti,
Please read the sticky "guide to flashing"
With re: to surreal check our RoseRom remade first post there is a guide to flash click the if stuck @ 3%, as both files & what to do there..
Re: MMS either connection setup or input of settings manually will work.
stylez.
Capitan Totti you will not be dissapointed in 6.1. Imagine your drowning in a pool and someone finally decides to pull you out of the water and you finally get to breathe, thats what going to 6.1 feels like! IMO WinMo 6 is complete garbage and 6.1 should be the standard for every phone out there thats running 6.
Flashing is very simple as long as you read the directions. Good luck!
Oh I have been reading a lot alright! Yes, it does not seem hard, but I just wanted to make sure I don't brick the phone.
Double post.
I screwed it up the first few times (from not reading the directions first) and still came out ok.
I found some good threads and done a lot of reading, but I guess no one had this problem so far but me. As I said above, I got the tegicet9 files and also the fullet9 files... (I am Italian so I would like to have both Italian and english on the phone) but when I unzip them into a folder I called New Folder for all my unzipping... they just copy themselves and don't change into one icon like say the SDA unlock or the USPL thing I got makes itself as more than one folder... ?? Thanks.
Was wondering if I should also call T-Mobile to SIM Unlock the phone, you know so I can use the Dash with any SIM. I am gonna have to do it anyway for when I go to Italy but I was wondering if NOT sim unlocking the Dash and then upgrading will cause issues on the phone. ???
So far it seems easy.
Connect Dash, run SDA unlock from desktop, once its done unzip (if you have not before) SurrealNetAppUnlock (which is another file that does not unzip for some reason), place it in My Documents (I don't have a memory card yet), go to Dash itself, go to File Explorer and install it from Dash itself. Once done turn off Dash.... turn it back on connected to ActiveSync, run USPL.Bat (Mine says USPL.Batch but I take it its the same), click enter on keyboard and ok on dash when prompt to, after a bit it will go black then white (bootloader mode), open RUU.Kavana and follow the steps (if I pass 3% I know I am good)... now I got a question... When the upgrading is complete 100% and you can click finish... I know it does a cold reboot, do I have to (ever? I've seen videos and all but this part is not clear also sound wise on say YouTube) unplug the usb cable or no?I know that for et9 I got to just place it and install it on the Dash but like I said, it does not unzip insto an installable file. If someone can read this and answer my few questions and help, I will be done hacking this baby in less than 30 minutes. Thanks
since getting my TP2 I haven't really changed any settings - mainly because I'm totally clueless about installing new applications and stuff.
I was just wondering what suggestions people would have for a new TP2 user who wishes to get the most out of his new toy?!
I would like to watch films on it, play games on it and listen to music on it. I have heard that coreplayer is good for watching movies but dunno how to go about installing it?! (thats how useless I am!).
Is there a central resource that i should be going to to find applications that are compatible with the TP2, and does anyone have any suggestions for decent applications that I should install, that are recommended and people feel improve the phone?
Also, from what I can tell, I cant just download and install a theme and pick it from a list on the phone? is this correct?
I'd eventually like to get a decent navigation program and some games installed.
I know this sounds like a pretty random post, but i've been reading some posts on here and am confused by how things are installed, and what a CAB is?!
(I also notice that I cannot get this site to load properly on my phone - it just displays a load of random characters? I am using opera, would IE solve this?)
I have an ipod touch and installing stuff on it via itunes is obviously a breeze, so is it as easy on this phone?
thanks for your time
Q99
It's all on the wiki or other posts around here ...
CAB: Install from the phone. Either mail it to yourself and download it from your mobile mail, use your USB-cable or bluetooth it or whatever.
EXE: Install it from the PC with the phone attached in ActiveSync mode.
For all the programs. Sorry, just read. I don't think anyone is going to make a list for you, Then again, everyone has different opinions ...
I can read the xda-site perfectly on my TP2. Same on my TP btw.
CAB is just an extension. Like a word document is: paper.doc
A program for you mobile can be: game.cab
A cab file is always an installation file. running this file, installs something on your pocket pc. So you have to run the file on your pocketpc.
As explained above, .exe extensions are programs ran in windows.
If you have a USB cradle the easiest way is to connect it with your pc and make a connection between those 2. Opening devicecentre (or something similar in some other language) en the connecting your TP2 to you pc will result in a popup asking if you want to set the synchornisation settings. Doing so is creating a link between your phone and your pc that will be remembered. So next time you connect, your pc recognises you mobile phone. When you have done this you have several options in the device center.
To move CAB files to your pocket pc you click on the explorer icon (bar) and it opens up your TP2's storage. After copying the file you execute it from your phone.
For installing .exe files, you also start windows mobile devicecentre and make sure they are connected. Then you run the installer from your pc. at some point the installation on the pc says it's done. Look at your phone and it asks permission to install this particular piece of software.
quasar99 said:
since getting my TP2 I haven't really changed any settings - mainly because I'm totally clueless about installing new applications and stuff.
I was just wondering what suggestions people would have for a new TP2 user who wishes to get the most out of his new toy?!
I would like to watch films on it, play games on it and listen to music on it. I have heard that coreplayer is good for watching movies but dunno how to go about installing it?! (thats how useless I am!).
Click to expand...
Click to collapse
Google coreplayer, download the cab file, copy it to your phone using activesync, run the cab file from your phone using windows explorer, installing it to your storage card
quasar99 said:
Is there a central resource that i should be going to to find applications that are compatible with the TP2, and does anyone have any suggestions for decent applications that I should install, that are recommended and people feel improve the phone?
Click to expand...
Click to collapse
No there isn't a App store like the Ipod , which means we don't have to suffer itunes \o/
Look around on here in the Rhodium Themes & apps section, also look in the Blackstone, Topaz and Sony Ericsson X1 sections. Most programs that run on those devices will work on the TP2
quasar99 said:
Also, from what I can tell, I cant just download and install a theme and pick it from a list on the phone? is this correct?
Click to expand...
Click to collapse
It depends which version of the phone you have. The branded versions may take a bit of work but the unbranded ones should be able to use any themes designed for this device/screen resolution
quasar99 said:
I'd eventually like to get a decent navigation program and some games installed
I know this sounds like a pretty random post, but i've been reading some posts on here and am confused by how things are installed, and what a CAB is?! .
Click to expand...
Click to collapse
A CAB file is an executable file that installs a program/theme/registry hack onto your phone. It has to be run on your phone
quasar99 said:
(I also notice that I cannot get this site to load properly on my phone - it just displays a load of random characters? I am using opera, would IE solve this?)
I have an ipod touch and installing stuff on it via itunes is obviously a breeze, so is it as easy on this phone?
thanks for your time
Q99
Click to expand...
Click to collapse
Are the characters random when you zoom in?
A windows phone is not as easy as an iphone to install stuff, but it is not too difficult, if I can figure it out anyone can! But your TP2 will do more than an iphone and is a better device so its worth persevering with
Hi there,
I've recently downloaded both Vito's SMS-Chat and Birdsoft's Extreme Text programs as possible alternative text-messaging clients. I have a Tilt 2 phone running on Windows Mobile 6.5 - with the most recent upgrade provided on the HTC Web site. (My phone runs on HTC Sense, for example.) I'm having a problem with both of these text-messaging programs. Both programs install successfully on my phone, and both programs show sent and received messages that have been initiated by using the default SMS client; however, when using either SMS-Chat or Extreme Text, I am UNABLE TO SEND a text message. In the threaded-messaging windows, they will list the messages that I have written - but the messages don't actually get sent. Are these two programs incompatible with the Tilt 2 phone running on the upgraded WM 6.5 / HTC Sense? Is there anything that I could do to get these programs to work? I find the default HTC Sense messaging client to be slow and cumbersome. Thanks for whatever advice that anyone could provide. I noticed that someone else had posted a question similar to this one - regarding SMS-Chat only - but a solution didn't appear to be listed in that thread. Also, since my question is with regard to both of these text-messaging programs, I decided to begin a new thread. Thanks again.
DD7374 said:
Hi there,
I've recently downloaded both Vito's SMS-Chat and Birdsoft's Extreme Text programs as possible alternative text-messaging clients. I have a Tilt 2 phone running on Windows Mobile 6.5 - with the most recent upgrade provided on the HTC Web site. (My phone runs on HTC Sense, for example.) I'm having a problem with both of these text-messaging programs. Both programs install successfully on my phone, and both programs show sent and received messages that have been initiated by using the default SMS client; however, when using either SMS-Chat or Extreme Text, I am UNABLE TO SEND a text message. In the threaded-messaging windows, they will list the messages that I have written - but the messages don't actually get sent. Are these two programs incompatible with the Tilt 2 phone running on the upgraded WM 6.5 / HTC Sense? Is there anything that I could do to get these programs to work? I find the default HTC Sense messaging client to be slow and cumbersome. Thanks for whatever advice that anyone could provide. I noticed that someone else had posted a question similar to this one - regarding SMS-Chat only - but a solution didn't appear to be listed in that thread. Also, since my question is with regard to both of these text-messaging programs, I decided to begin a new thread. Thanks again.
Click to expand...
Click to collapse
Why aren't you asking this question on Vito's or Birdsoft's website? This would be a support question for them to answer. Most of us use Arksoft messenger or some other included one from our ROMs. If the program isn't compatible with your device, then they should offer you a refund.
EDIT: After looking at both websites, it appears that SMS Chat is compatible with WM versions 5, 6.0, and 6.1. Extreme Text is listed as compatible with 6.0, 6.1, and 6.5.
Arcsoft and the Tilt 2 running WM 6.5 with HTC Sense
cajunflavoredbob said:
Why aren't you asking this question on Vito's or Birdsoft's website? This would be a support question for them to answer. Most of us use Arksoft messenger or some other included one from our ROMs. If the program isn't compatible with your device, then they should offer you a refund.
EDIT: After looking at both websites, it appears that SMS Chat is compatible with WM versions 5, 6.0, and 6.1. Extreme Text is listed as compatible with 6.0, 6.1, and 6.5.
Click to expand...
Click to collapse
Thanks a lot for the advice. I contacted both Vito's and Birdsoft's customer-service departments; I'm just waiting for a response from each. Thanks, too, for taking the time to research the WM versions with which these two programs are compatible.
I tried to install Arcsoft, the program to which you referred. My phone indicated that the program installed successfully; but I cannot see the icon, nor can I find it anywhere in any of the directories. I installed a "security policy lifter" cab, too, which I found mentioned somewhere in this forum. Evidently, that little cab is to be installed before Arcsoft is. Anyway, do you have any ideas why this isn't working for me? If you do and if you have a moment, please pass them along. Thanks again for the response.
DD7374 said:
Thanks a lot for the advice. I contacted both Vito's and Birdsoft's customer-service departments; I'm just waiting for a response from each. Thanks, too, for taking the time to research the WM versions with which these two programs are compatible.
I tried to install Arcsoft, the program to which you referred. My phone indicated that the program installed successfully; but I cannot see the icon, nor can I find it anywhere in any of the directories. I installed a "security policy lifter" cab, too, which I found mentioned somewhere in this forum. Evidently, that little cab is to be installed before Arcsoft is. Anyway, do you have any ideas why this isn't working for me? If you do and if you have a moment, please pass them along. Thanks again for the response.
Click to expand...
Click to collapse
If you use a stock ROM, meaning a ROM image that the device came with or an upgrade from your carrier or HTC, then you will need the security policy lifter installed beforehand. This will lift the restrictions on your device for modifying the system files that Arksoft messenger changes. If you are running a custom ROM, then you should not need that cab at all as this change will already be cooked in.
Make sure that you install the WVGA version of the cab file. This is the resolution that the Rhodium (Touch Pro2) uses, which is 480x800.
Arksoft Messenger is meant to replace the default HTC messenger. There should not be any icons or Start Menu links for you to open. The application is meant to stand in the place of HTC Messenger wherever that application would have opened.
The only other thing I can think of is to remove both of those programs and then install sdkcerts. I've attached that file for your reference. Once that installs, soft reset your device and then install Arksoft. If that doesn't work, (keep in mind that it replaces HTC Messenger) then maybe try out a custom ROM or something that has it cooked in already.
Arcsoft and the Tilt 2 WM 6.5 with HTC Sense / Vito SMS-Chat / Extreme Text
cajunflavoredbob said:
If you use a stock ROM, meaning a ROM image that the device came with or an upgrade from your carrier or HTC, then you will need the security policy lifter installed beforehand. This will lift the restrictions on your device for modifying the system files that Arksoft messenger changes. If you are running a custom ROM, then you should not need that cab at all as this change will already be cooked in.
Make sure that you install the WVGA version of the cab file. This is the resolution that the Rhodium (Touch Pro2) uses, which is 480x800.
Arksoft Messenger is meant to replace the default HTC messenger. There should not be any icons or Start Menu links for you to open. The application is meant to stand in the place of HTC Messenger wherever that application would have opened.
The only other thing I can think of is to remove both of those programs and then install sdkcerts. I've attached that file for your reference. Once that installs, soft reset your device and then install Arksoft. If that doesn't work, (keep in mind that it replaces HTC Messenger) then maybe try out a custom ROM or something that has it cooked in already.
Click to expand...
Click to collapse
Thanks for your thorough response and for the time that you took in compiling this information. I've already done everything that you suggested, though, and I've even contacted Vito's and Extreme Text's support teams... but to no avail. Neither has replied. With regard to Arcsoft Messenger, I tried just as you suggested; but that didn't work. I think, at this point, I should just let it go. Looking for a "cooked" or custom ROM might be a bit beyond my scope of knowledge. I imagine that I'd have to do a hard reset as well - not something that I enjoy! If you could think of anything else, by all means let me know! Otherwise, thanks again for lending your expertise and patience. I appreciate it.
DD7374 said:
Thanks for your thorough response and for the time that you took in compiling this information. I've already done everything that you suggested, though, and I've even contacted Vito's and Extreme Text's support teams... but to no avail. Neither has replied. With regard to Arcsoft Messenger, I tried just as you suggested; but that didn't work. I think, at this point, I should just let it go. Looking for a "cooked" or custom ROM might be a bit beyond my scope of knowledge. I imagine that I'd have to do a hard reset as well - not something that I enjoy! If you could think of anything else, by all means let me know! Otherwise, thanks again for lending your expertise and patience. I appreciate it.
Click to expand...
Click to collapse
The first flash can be a bit daunting, but it gets easier with time. Hard resets and flashes can be prepared for by the numerous backup applications available. Microsoft Myphone will backup all of your personal information for you. Any programs you have installed from the marketplace can be re-downloaded. Any applications you've installed in any other fashion can be backed up and then reinstalled. Once you get the knack for flashing, it is a simple task to learn how to automate the flashing process so that everything installs and restores itself automatically. Most all current ROMs for the Rhodium will use a different messenger program than the HTC one.
cajunflavoredbob said:
The first flash can be a bit daunting, but it gets easier with time. Hard resets and flashes can be prepared for by the numerous backup applications available. Microsoft Myphone will backup all of your personal information for you. Any programs you have installed from the marketplace can be re-downloaded. Any applications you've installed in any other fashion can be backed up and then reinstalled. Once you get the knack for flashing, it is a simple task to learn how to automate the flashing process so that everything installs and restores itself automatically. Most all current ROMs for the Rhodium will use a different messenger program than the HTC one.
Click to expand...
Click to collapse
Sorry for the delay in my response... Thanks very much for your insights and expertise. I will give your suggestions a try!