hi frieds,
I want to unlock XDA I, SX56 for following.
ROM : A.30.09 ENG
rom date : 01/01/04
radio version : A.33.02
protocol version: 1.3.3
I have refered many threads and came to know that I need special edition rom to unlock and its not available anywhere.
can anybody please help me or can tell me stepwise guide.
any solution without upgrading rom?
Thanks,
CyberV
me too! HELP!
Long time gone by...
I need your help.
Got a SX56 PW10B1
Rom R.30.07ENG
Radio RA.33.03
Bootloader 5.22
AT&T / Rogers, no SimLock
When i try to install special editionROM 1.2,
adapt ROM doesn't work- window briefly flashes up,
so fast i can't read what's written in it.
When i afterwards try to update rom i get error message
because ROM is for PW10A1, and my phone is PW10B1.
As i said- adapt ROM doesn't work.
Does any one here have any idea?
@ Admin: why am i not allowed to post in most Wallaby Threads?
edit 14.01.2013: solved. Flashed SR1.2 via SD-Card, following the how-to from Wallaby-Wiki.
Related
Hi everyone
straight to the point..
I installed ROM ver 4.00.01 ENG. Unfortunately, now I cannot use the phone on my XDA. It can't find my phone network. I tried to go into phone options but the phone hang. Otherwise, the PDA works fine.
I've tried to install original o2 ROM, but.. still.. unable to get phone work.. it said.. no signal..
my XDA is a asian version.. any way to solve this problem.. i've installed this 4.00.01 ENG ROM for so many time, but still same problem exist.. and even with my original o2 ROM the one i downloaded from o2 website..
any suggestion?.. what should i do..
This is my device information :
ROM : 4.00.01 ENG
ROM date : 5/16/03
Radio Version : 4.21.00
Protocol version : 32S54
Model No. : PW10B1 (behind XDA stated PW10A1)
*i've try go to bootloader menu, try to change the Band, but it can move down even i pressing the joystick.. it seem like not functioning...
1 more info : the o2 centre told me that i need to change the whole xda board to make the phone working...mmm.. is it true?
tq
hamizi said:
Hi everyone
straight to the point..
I installed ROM ver 4.00.01 ENG. Unfortunately, now I cannot use the phone on my XDA. It can't find my phone network. I tried to go into phone options but the phone hang. Otherwise, the PDA works fine.
I've tried to install original o2 ROM, but.. still.. unable to get phone work.. it said.. no signal..
my XDA is a asian version.. any way to solve this problem.. i've installed this 4.00.01 ENG ROM for so many time, but still same problem exist.. and even with my original o2 ROM the one i downloaded from o2 website..
any suggestion?.. what should i do..
This is my device information :
ROM : 4.00.01 ENG
ROM date : 5/16/03
Radio Version : 4.21.00
Protocol version : 32S54
Model No. : PW10B1 (behind XDA stated PW10A1)
*i've try go to bootloader menu, try to change the Band, but it can move down even i pressing the joystick.. it seem like not functioning...
1 more info : the o2 centre told me that i need to change the whole xda board to make the phone working...mmm.. is it true?
tq
Click to expand...
Click to collapse
Hello,
When you entered the bootloader did you see GSM Error ?!?!
If it was Gsm ok no need to change it you have to flash it with the right radio stack depending on the hardware.
tq 4 the reply..
anyway.. the GSM stated NO PRBLEM at all.. GSM OK..
but.. can i install original o2 radio stack with this ROM.. coz.. my device PW10A1.. but ROM version is for PW10B1...?
i dont know what else to do...
tq
hamizi said:
tq 4 the reply..
anyway.. the GSM stated NO PRBLEM at all.. GSM OK..
but.. can i install original o2 radio stack with this ROM.. coz.. my device PW10A1.. but ROM version is for PW10B1...?
i dont know what else to do...
tq
Click to expand...
Click to collapse
Hamizi,
Yes you can install o2 original radio stack it doesn't matter at all but it's not easy to downgrade if the version you have older than the current. Unless you could try this radio stack I already downgraded to this version ,you can get it from here ==> http://forum.xda-developers.com/viewtopic.php?t=9359&highlight=
I'm not responsible for any deffects.
Good luck
hi RamX2,
my god.. u save my life.. finally.. after few week waiting.. i solve my problem... now.. my xda come back to business..
i really want to thanks u.. u're really a man.. very helpful..
tq.. and tq again..
Hamizi,
You're most welcome bro, if you searched in the forum very well you would solved your problem without asking anyones help, lots of ppl here went into the same problem anyway now it's good that ur device is back to business :wink:
Dear All,
I spent a lot of hours, days, reading the posts on the forum about the Universal and upgrading it. I didn't find some answers.
I still have some open questions that I request your help in order to have a safe upgrade.
I have a Qtek 9000, that is SimLock.
I would like to Upgrade to an AKU 3.5 ROM or to one Crossbow ROM ( still under assessment)
Now my questions:
To upgrade,
I will have to upgrade bootloader, because since Aku 3.2 Rom , it needs to be 1.01. That is clear.
Edit: Opsss tried bottloader for first time and my version is 2.01 So no bootloader upgrade, but new question:
Sim Unlock works with bootloader 2.01?
1 - Do I need to SIMUNLOCK before ROM or Radio ROM upgrade? If yes:
- I will need an oficial radio ROM. Which one? Are 1.13 or 1.14 is OK?
- Must I first Simunlock and only after upgrade the bootloader?
2 -Country Code error, what is it? (Solved)
Edit : About Country error, no specific answer, but i got almost what I looked for.
Thx you all for the hard work and colaboration on this site.
Cheers
TADAA... answers
I'm afraid you didnt took your best sshot at searching, cuz 3 or 4 post above yours is a topic called "problems with upgrading?"
in this topic you will find the info AND tools you need to succesfully upgrade..
I don't know about the simlock thing, i flashed mine with the simlock on, to a cooked rom, and it works, but don't blame me if it F*CKS up your mobile i suggest that you do a bit of research in that part..
Country id error:
You get that when you try to install a rom that is from a different manufacturer/country then yours, to solve this problem look at this link
(the link to the forementioned topic)
http://forum.xda-developers.com/showthread.php?t=290234
Good luck!
bastiaanoskam said:
I'm afraid you didnt took your best sshot at searching, cuz 3 or 4 post above yours is a topic called "problems with upgrading?"
in this topic you will find the info AND tools you need to succesfully upgrade..
I don't know about the simlock thing, i flashed mine with the simlock on, to a cooked rom, and it works, but don't blame me if it F*CKS up your mobile i suggest that you do a bit of research in that part..
Country id error:
You get that when you try to install a rom that is from a different manufacturer/country then yours, to solve this problem look at this link
(the link to the forementioned topic)
http://forum.xda-developers.com/showthread.php?t=290234
Good luck!
Click to expand...
Click to collapse
I know how to solve the country error, I just would like to get more info about it.
About the other post, I will look for it, but when i made search ( last time was the last week) I didn't find the answers i look for.
Since I looked and didn't find it could you please provide a link? ( sorry)
Thx for your help.
Hi,
1. I agree with bastiaanoskam cause I think almost any question about upgrading the Universal has been answered before in this forum.
2. I don't see the need to unlock your device if you don't want to change your current provider.
3. As far as I understand the country error is due to a change in the original language for which your device was thought (look for MaUpgradeUt_noID.exe) i.e. you have a Japanese device and want to upgrade to WWE version.
4. About the bootloader, I just saw one ROM that is said it requires to upgrade your bootloader to 1.01, it was a preview AKU3.2 from i-mate but I don't really know if the upgrade is really needed. I have read it's not needed for Crossbow and also for custom cooked AKU3.5 but again every new cooked ROM usually has a thread so you can find answers there.
tripledes said:
Hi,
1. I agree with bastiaanoskam cause I think almost any question about upgrading the Universal has been answered before in this forum.
2. I don't see the need to unlock your device if you don't want to change your current provider.
3. As far as I understand the country error is due to a change in the original language for which your device was thought (look for MaUpgradeUt_noID.exe) i.e. you have a Japanese device and want to upgrade to WWE version.
4. About the bootloader, I just saw one ROM that is said it requires to upgrade your bootloader to 1.01, it was a preview AKU3.2 from i-mate but I don't really know if the upgrade is really needed. I have read it's not needed for Crossbow and also for custom cooked AKU3.5 but again every new cooked ROM usually has a thread so you can find answers there.
Click to expand...
Click to collapse
1 - I do agree that there is a lot of info about the upgrade process, I just didn't find the answer for what I'm looking for.
2 - I didn't find a post where is stated that the device should be unlock to install the new ROM, but I also din't find the oposite, so my doubt.
3 - It seems that I should try first and if I get the error, go for the alternative method. I woul like to jump this step, but if there isn't other way, well, that's life
4 - Maybe it's a bad interpretation on my side of the wiki post. Porbably only some I-mate based roms need the bottloader upgrade.
thx for the help
hello everyone, im trying a few days to install a rom but after few minutes i get error message!! i've used the Hard-SPL-Diamond-OliNex. idont know if it was success. but after that when i tried to install any version of rom i got error.
please some one help me out!!!!
my cuurent radio version is 1.00.25.03 and i ahve a dutch rom version.
areenahmed said:
hello everyone, im trying a few days to install a rom but after few minutes i get error message!! i've used the Hard-SPL-Diamond-OliNex. idont know if it was success. but after that when i tried to install any version of rom i got error.
please some one help me out!!!!
my cuurent radio version is 1.00.25.03 and i ahve a dutch rom version.
Click to expand...
Click to collapse
Manually enter bootloader and read the SPL version. That way you can verify you successfully upgraded HardSPL. If so, what is the error you receive?
sorry, could u pls tell me how, it would be so kind of u.
i mean step by step, if u have time for that!!!
many many thnx
areenahmed said:
sorry, could u pls tell me how, it would be so kind of u.
i mean step by step, if u have time for that!!!
many many thnx
Click to expand...
Click to collapse
You can find step by step in the sticky thread Tutorial here: http://forum.xda-developers.com/showthread.php?t=416211
But please read the Announcements too and obey forum rules!
Sry to extend this thread with another request for help, but the topic and the previous messages seem to fit.
I want to flash a T-Mobile MDA compact IV. I had no problem with the HardSPL from Olinex. I flashed 1.40 (also it says 1.30) and 1.38. But when I want to flash a ROM (tried some from the forum) I always get an error 262.
I got the same problems when I try to flash HardSPL 1.34 from jocky(?).
Any ideas why and what to do?
Thanks for your help
CacheDigger said:
Sry to extend this thread with another request for help, but the topic and the previous messages seem to fit.
I want to flash a T-Mobile MDA compact IV. I had no problem with the HardSPL from Olinex. I flashed 1.40 (also it says 1.30) and 1.38. But when I want to flash a ROM (tried some from the forum) I always get an error 262.
I got the same problems when I try to flash HardSPL 1.34 from jocky(?).
Any ideas why and what to do?
Thanks for your help
Click to expand...
Click to collapse
Check this out: http://www.google.com/cse?cx=000825...r+262&sa=Search&cof=FORID:0&ie=utf-8&oe=utf-8
You might be surprised!
Hi, hi recently unlock my phone but when I tried to install a new ROM on it for stop to see Roger's presentation on start up, that seem to doesn't work ??? but i have unlocked my phone yet !?!? Can anyone can help me pls and can you give me the best setting for my Diamond like the newest ROM, RADIO and good useful sofwares... Thanks
There are some stickies regarding CID unlocking/Hard SPL your device (is not the same as SIM unlocking..)
Read those carefully and then choose an appropriate ROM.
I tried downloading the newest HTC ROM update---says my device is not supported for this update. ???????
I downloaded the file using a provided serial in another thread for the WWE version.
Can I use this file to flash my rom????
My diamond is an UNBRANDED and UNLOCKED version. I assume its a UK or US version. I use it with my ATT&T sim card.
It's a 1.93.422.4 WWE currently...
Any reason this 2.03 rom WONT work for me?
Can I use it?
I started the flash process just to see if it would give me an error or incompatible message and it did not. It was ready to install.
Any thoughts?
thanks
Man,
You really need to read the wiki and this thread.
Not meaning to sound rude - but your questions are answered thoroughly, providing the information you need to understand before flashing your device.
wow man, that was SO INSIGHTFUL.... thanks
I have flashed MANY phones, many times. I am very aware of how to do it and Yes I have read that page.
I am just trying to see IF ANYONE KNEW offhand if that new WWE ROM would work over my existing ROM without bricking it.
but thanks
If you got it off the Diamond page and know it's a Diamond ROM for sure, then you can flash it. If you don't know where you go it or have no idea for which device it came for, it has to be ported.
Thread closed.