Talking about Hp Jornada 928. - Upgrading, Modifying and Unlocking

As I know, I can't flash OS by anyway. Because Hp Jornada 928 is not official device.
So, when i enter bootloader. To flash OS, It loading nk.raw file on CF card.
Now, are there anyone know what "nk.raw" file is? Is it the same with nk.nbf? Because I'm not get nk.raw. I can't compare with nk.nbf.
I really need nk.raw file.
Thank!

Related

Help... Need to install a .nb0 file using lnbms command...

So I have a .nb0 file I need to load on my hermes device and the instructions I have say to use the lnbms command to do it. Sadly I have HardSPL installed and lnbms does not seem to be recognized as a command. Does anyone know how to load a .nb0 file if I have HardSPL installed?
Thanks,
LouisK
Um ya that makes not that much sence. Do you have a ROM.nbh or Radio.nbh? since you need to have a file type that is compatable with the hermes and I dont think the one your talking about is.
rm -rf *
-fluxist
louisk said:
So I have a .nb0 file I need to load on my hermes device and the instructions I have say to use the lnbms command to do it. Sadly I have HardSPL installed and lnbms does not seem to be recognized as a command. Does anyone know how to load a .nb0 file if I have HardSPL installed?
Thanks,
LouisK
Click to expand...
Click to collapse
Last time I checked, .nb0 files don't go on Hermes devices.
I am in the same boat. I have an os.nb0 that was extracted from a hermes. I want to get it onto my device.... lnbms is the command but it's locked in the bootloader. Anyone know how to get around this?
so, just checking, you've extracted the nb0 file out of a hermes rom and are trying to put it into a loaded os????
Sounds to me like you need to be cooking your own os if you want to do that...
And then reflash time....
I figured it out. The reason that you can not flash a .nb0 with MTTY is the bootloader is locked. Even though the phone may be CID or Super-CID or SSPL or whatever... you MUST have a bootloader that is unlocked and will allow the lnbms command to pass. I have not seen any information yet on this and the hermes. I was able to do this on my htc Wizard though Know that doesn't help but it does atleast tell you why you can't do this action

nbh files?

how do i install/use an nbh file? i looked on the forum and cant find it. please someone either tell me or send me a link explaining how to use nbh files. my computer doesnt recognize the format. thanks.
I suppose you want to upgrade your pda or your phone.
You must use a bootloader to install the file and upgrade your pda. Many bootloaders exist.
For example, I've installed a new ROM with WM 6.1 (from Algasystems) on my iPAQ 4700 and I have used a bootloader that I have found in the thead about my pda (I think I've used MTTY). Than I suppose you can find yours in the thread where you have downloaded your ROM .
To flash .nbh files you need a custom.RUU (Rom Update Utility) .nbh fiels are only flashable to certain devices, i.e. HTC Kaiser, Tilt, TYTNII, etc.
Older devices flash with a variation of this. What is your device type?

How to extract imgfs from HP ipaq 111?

I need some files from the ipaq 111 rom (already have the nbf file), but I don't know the command line parameters to do it. Can someone enlighten me on how to do this and which command line parameters to use?
Steven,
How did you extract the ROM image? Do you know how to get the 111 in bootloader mode?
I am thinking that the 211 would use a similar process so that is why I am asking....
I'm trying to figure out how to extract the rom image, that's why I posted this thread. No, I do not know how to get the 111 or 211 in bootloader mode.

Grab It for Toshiba G810

Hi,
I have used this utility to Grab rom image from my Toshiba G10 and recieved bin large bin. file .( 131,072 ).
I want to be able to extract and image file and to add/remove unwanted utilities.
In the end if possible I want to close it and flash rom again.
Is there specifc tool to use?
I also have rom image EXE. file on PC if it might help..
please advice,
Tnx.
Ran.

i780 rom editing

hi everyone i need some help;
I have latest firmware from samsung and it is in .exe format and I want to have pda part of it. i mean .bin file of it. I used omnia's exe convertor and I had img file (88mb) and I dont know how can I get .bin part from image file.can u help me?
or do u have another method or tool to get .bin part?
thanks a lot for ue help

Categories

Resources