Related
MMB was kind enough to post the Qtek 9000 ROM here:
http://s5.yousendit.com/d.aspx?id=12XDPY08OSB2R0PAMI3W42KE3Q
And I will be uploading it to the FTP for everyone else in case the above link expires:
/Uploads/Universal/Shipped ROM/
Even though it has the "latest" ROM date and version number, I seem to be having continuous issues with my Qtek 9000 in the fact that some of my settings refuse to stick:
I have to constantly re-pair my HS850 Bluetooth headset and my GlobalSat BT-338 GPS.
I have to occasionally associate my device to my Wi-Fi router and re-enter my WPA-PSK key.
I have since flashed my device with the JASJAR ROM and the O2 Radio ROM, and customized the JASJAR's Extended ROM to see how much better it performs.
Hi,
Can anyone tell me how I can use this ROM with the NoID installer. Again I need to bypass the country code error generated by the .exe installer.
Or explain to me where these installers "unpack" their files to so I could try and locate them and use the NoID installer from there?
Michael
now only if we can get the english orange rom aswell....
BeyondtheTech said:
MMB was kind enough to post the Qtek 9000 ROM here:
http://s5.yousendit.com/d.aspx?id=12XDPY08OSB2R0PAMI3W42KE3Q
And I will be uploading it to the FTP for everyone else in case the above link expires:
/Uploads/Universal/Shipped ROM/
Even though it has the "latest" ROM date and version number, I seem to be having continuous issues with my Qtek 9000 in the fact that some of my settings refuse to stick:
I have to constantly re-pair my HS850 Bluetooth headset and my GlobalSat BT-338 GPS.
I have to occasionally associate my device to my Wi-Fi router and re-enter my WPA-PSK key.
I have since flashed my device with the JASJAR ROM and the O2 Radio ROM, and customized the JASJAR's Extended ROM to see how much better it performs.
Click to expand...
Click to collapse
I am currently using the Jasjar ROM / Extended Rom and the O2 Radio rom. No real issues so far. I am not sure I should try the update of the Qtek 9000 ROM looking at your comments above.
But is in Italian or English? thx
Unit only display "Serial v1.00" after Qtek ROM fl
Hi,
After attempting the Qtek ROM flash my unit now only displays "Serial v1.00" after a cold or hard reset.
I've tried to fallback to the JasJar ROM and the same thing happens.
Any assistance with this problem would be most appreciated.
Regards
Michael
Re: Unit only display "Serial v1.00" after Qtek RO
michaelg said:
Hi,
After attempting the Qtek ROM flash my unit now only displays "Serial v1.00" after a cold or hard reset.
I've tried to fallback to the JasJar ROM and the same thing happens.
Any assistance with this problem would be most appreciated.
Regards
Michael
Click to expand...
Click to collapse
Try to reflash again, but this time only use the Radio Rom 1.04.02
How can I extract the shipped ROM from my unupgraded UK TMobile MDA Pro?
I will post it up after extraction in case anyone needs it.
stanthebiker said:
How can I extract the shipped ROM from my unupgraded UK TMobile MDA Pro?
I will post it up after extraction in case anyone needs it.
Click to expand...
Click to collapse
See here http://forum.xda-developers.com/viewtopic.php?t=34552&highlight=
Re: Unit only display "Serial v1.00" after Qtek RO
michaelg said:
Hi,
After attempting the Qtek ROM flash my unit now only displays "Serial v1.00" after a cold or hard reset.
I've tried to fallback to the JasJar ROM and the same thing happens.
Any assistance with this problem would be most appreciated.
Regards
Michael
Click to expand...
Click to collapse
Hi,
take a look to your pm or look at this:
http://forum.xda-developers.com/viewtopic.php?t=33191
Teja
Hi,
Yes it seemed that a radio only (v 1.04.02) ROM flash got the unit working again.
I did have the SIM and SD card out for several ROM flashes prior, but maybe the combo of all 3 (no SIM, no SD and radio only) was the trick.
Regards
Michael
michaelg said:
Hi,
Yes it seemed that a radio only (v 1.04.02) ROM flash got the unit working again.
I did have the SIM and SD card out for several ROM flashes prior, but maybe the combo of all 3 (no SIM, no SD and radio only) was the trick.
Regards
Michael
Click to expand...
Click to collapse
That is good news. Please let us know how the ROM of the Qtek performs. Currently I am using the Jasjar rom with the O2 rom. No real issue so far.
michaelg said:
Hi,
Can anyone tell me how I can use this ROM with the NoID installer. Again I need to bypass the country code error generated by the .exe installer.
Or explain to me where these installers "unpack" their files to so I could try and locate them and use the NoID installer from there?
Michael
Click to expand...
Click to collapse
If you have WinRAR or WinZip installed, right-click on the executable and choose Extract to [folder]...
Then you can throw in the MaUpgradeUt_NoID.exe file in the same folder and run it.
Someone also said you can add a line [CHECKCEID_TYPE]=1 in the RUU.conf file using Notepad, but I don't think it made a difference for me.
Hi,
Actually the last ROM I flashed was the JasJar so I'm back to square one, but I intend to try the QTek again in a couple of days (just need to settle the nerves a bit after the horror of owning an expensive brick for several hours).
In regards to unpacking the .exe files, I stumbled across that trick with WinRAR myself and I was a little surprised myself. That would make upgrading from other sites so much easier especially with access to the NoID installer.
I might try the NoID and the RUU.dll trick to bypass country code to see if both work (if my heart can stand the strain of more repeats of the brick event).
At the moment I've got a prepaid vodaphone SIM (here in Australia) and I'm working on setting that up. I've been advised that full mobile broadband is only available for billing customers so I'll have to wait until I can visit a shop to sign up and try that.
If anyone has the settings already for vodaphone let me know!
Michael
MDA PRO Qtek ROM
at the moment i am using this QTEK rom.
Just upgraded my MDA PRO and now i am using it.
It is one of the best roms because no programs/logos of O2 / T-Mobile etc. And it runs very fast, dialskin is normal windows (not the one of O2)
I am very happy with it at the moment,
only thing i want is an sim unlock tool so i can use my vodafone sim in the phone!
I AM IN HELL PLEASE HELP!!
Hey guys.
please be gentle with me . . ok so i got the rom . . .
tried to do the upgrade - the damn thing is stuck on the splash screen and will NOT progress
just shows
R. 1.00.02
G 42.33.P8
D 1.12.42 WWE
Now I got the ma upgrade no id thing - but cannot use the bloody thing now!!!
please help, if my mrs finds out she will chew me up!
pleeeaaassseee help!!!
cheers
lr
RADIO v1.03.00 required!!
Hi!
Can somebody extract the QTEK 9000 shipped RADIO v1.03.00 out and post here?
The reason being if after upgrading to the RADIO (from Dopod 900) v1.04.02 and finding it unsuitable later on I would like to re-flash it with the original shipped RADIO.
Thanks
http://www.beyondthetech.com/downloads/phone/upgrades/
I put the JASJAR, QTEK, and XDA EXEC Upgrade Utilities there. Just download the one you want, right-click and extract the files with WinZip or WinRAR...
I'm stuck pon the accursed splash screen - tho i can get bootloader up .. any ideas what i can do?
RE
Hi BeyondtheTech
Thanks.
One question. How to flash the RADIO only?
Thanks again
Hello Everyone,
I just joined this forum as i was able to buy a QTEk with the following details:
Version de ROM : 1.13.74 ESN
Version de Movil : 1.04.02
Version Protocolo : 42.37.P8
Version de ExtROM : 1.13.169 ESN
As I am more fluent in English than Spanish, I wanted to upgrade my ROM to English, but also I would need to Backup the ROM of the spanish version so if there are problems with the phone, I can flash it back to the original manufacturer installed ROM.
What program do I need to Backup the ROM (and restore in the future) before I start fiddling?
Also, I heard that I can erase Extended ROM. As of now, what can I use the space that I will gain from erasing the contents of the Extended ROM?
Also one thing i noticed is that some of the keys have rub marks coming from the upper part of the universal (the screen) I think they touch eachother when it is colsed. Is this a factory defect?
Finally, I don't know where to register and get support for my QTEK. Where do you download/search for patches? Where do I register this device? Should I have gotten an i-mate instead?
Thanks in advance for all your comments, guys.
Jorge
GUYS?!?
Hello Anybody out there?
I have posted this message 2 weeks ago, a few views but no answers so I'll go ahead and update you on what's happened:
Thanks to BUZZ_LIGHTYEAR I was able to RAW DUMP my Spanish ROM to a File which I exchanged for a decoded nk.nbf file from an unpacked English ROM Update (the QTEK WWE) then I encoded the RAW file so now I have a new nk.nbf file which i pressume is the Spanish verion.
I'm not sure if it'll make a difference that the rest of the files are in English but will this update any UNIVERSAL to the Spanish verion? Anybody needs Spanish ROM and is willing to test this out? I can send you the Files needed? If it doesn't work you just have to flash back to the English. I haven't tested it yet because my device is originally Spanish so I have no fallback ROM if it doesn't work. But I followed BUZZ's instructions and I don't think it's gonna cause a problem.
Hmm,
seems this topic is very boring to everybody here, oh well....
Anybody has similar case of rubbed-out keys on the keyboard?
Just to show that there are persons available reading and having an opinion
Left and right of my keyboard, a little lower then the keys itself there are two outstanding rubber ? pads ? protecting the display from touching the keyboard, be it in portrait or landscape mode. So no, I do not have this problem.
Ruud
Mine have the rubber stuff too, Maybe i have them a little low... Could I possibly get a replacement? I don't think this can be considered wear-and-tear as i only had my phone for 1 month..... And the "damage" was caused by open/closing of the phone. Not using of the keyboard.
I would say certainly worth a try.
Good luck.
Ruud
i need spanish rom
I bought my qtek 9000 from O2 (UK) by ebay, it works great, but i need spanish software, i'd like to probe MoviStar, vodafone (if available) and free Spanish versions. I also need instructions or manual, i flashed a xda2 once, but i can't remember how i did, i think i put it in a special test mode. Thanks.
I have posted the QTEK Spanish ROM in the uploads section. Please look for it. Both OS and Extended ROM are there.
Just download the OS, and run the "noID" file to upgrade your QTEK to Spanish. Just remember that also the keyboard will be configured to Spanish (which has the "Ñ" character) so you have to re-map it back to whatever keyboard you have. You can search how to do this in the forums.
Just download the 2 said files, then you can upgrade your ROM. These ROM's are dated OCTOBER 2005
what do i need for backuping my system to a sdcard?
Im not sure. I backed-up to my PC. I think you can search here for grab_it program that dumps to SD card but i'm not sure it will work for WM5 or Universal
Well, how did you backup system to your pc?
and thanks again.
Actually, what i backed up was my OS nad ExtendedROM. No personal customizations.
You can see in my second post that i was able to do it thru steps i saw at BUZZDEV.NET thanks to buzz-lightyear.
It's under "how to d2s dump" you can follow my story there on how to backup ROM. Esentially it copies your operating system to a file on your PC which you can then install on another device after encoding/decoding.
I have posted my Spanish QTEK ROM on the FTP site so you can change your QTEK to spanish if you want.
What's your QTEK ROM version? all details please:
ROM Version
ROM Date
Protocol Version
Radio Version
Extended ROM Version
What's your QTEK ROM version? all details please:
ROM Version
ROM Date
Protocol Version
Radio Version
Extended ROM Version
Click to expand...
Click to collapse
just look at my signature ;P and thaks for your help, i'm going to try.
hi where can i download the full rom of qtek in spanish
thanks
miguelromerom said:
hi where can i download the full rom of qtek in spanish
thanks
Click to expand...
Click to collapse
It is not a shipping ROM but you need 2 files:
1st: ftp://xda:[email protected]/Uploads/Universal/
QTEK Spanish ROM (1.13.74 ESN).rar --- This is the OS ROM
2nd: ftp://xda:[email protected]/Uploads/Universal/
QTEK ExtendedROM.rar --- this is the Extended ROM
i have the spanish extended rom, but the jasjar don´t reconice ?¿
thanks for alll
You have to install first the QTEK OS ROM then copy the Extended ROM after. Where in Spain do you live?
You can call me if you need more help. But i speak English, my Spanish is MIERDA
where unlock ?¿?
ok i live in malaga, do you have msn
mine is [email protected]
Hello,
im an old reader of this form, cause im reading it since 2 years, but never tryed to write something.
Now im really interested in this... the upgrade of an ipaq 3970 to WM 5.0.
I know that noone tryed it, cause i really couldnt find anything on interent. But i found that someone update its ipaq 5450.
So the two has the same hardware i think apart the processor (new version) and the wifi.
So... someone can help me or explain me, cause i really cant get nothing until now.
I tryed with the described method for 5450 to update, but the Hima update tool isnt able to connect to my ipaq.
Every help will be appreciated,
thanks,
Tommaso
i've yet to have confirmed anybody ever porting a rom from one device to anohter even if the hardware was somewhat the same
h5450 to WM5
Could you maybe post some more info - links on this upgrade of h5450 to WM5? I'd like to try it. I've done few attaempts which have failed, btu so have others to upgrading to WM2003. But maybe I'm doing something wrong.
please post more info.
Cheers
Y
Uhm... i dont think that here i can write links or something else about a software that sure is warez.
So u can find it easily on p2p channels, but i dont know really if it works. From what is written yes and i can believe this yes, cause i struggled much and i could update my 3970 bluetooth stack to the very last one stack outta there of Broadcomm and make it work. So i suppose that there arent so much differences from pda to pda.
iPAQ 3970 to WM 5.0
Yes, I'm interested in it too!
Can any one guide me how to do it in kitchen ? !
many thanks!
As a user of Familiar Linux on a few different Ipaq devices I can confirm that the 3900 and 5000 series use the same installation file for installing Linux, so it may be possible to 'cross-flash' both these devices, however as always, make sure you have a good OS restore file available.
Actually perhaps the best way to go would be to use the OHH bootloader used in installing Familiar to save a ROM image file before trying any exotic upgrades, might help in any unbricking that may be necessary if things go wrong....
Hi there,
Looks like this forum is a great place to ask a few questions since I just got my first PPC (QTek G100 WM5 Spanish (sadly).
Sadly I didn't have a look for available ROM Updates for this model prior buying it and it seems like an impossible task to find anything that could help me turning my G100 into something useful with a spanish OS..
I basically bought it in Spain, hoping that the language could be switched, but I guess I was wrong. After contacting pretty much everyone (HTC / QTek Support and even the press office) the final answer was: It's impossible to change the language.
I also had a look at roms and found one in english called
RUU_GLX_O_10001_10200500ENG_LB_BP
but this one returns "invalid device id" once I try to "update to english". Since I am sure many people here have great experience I would like to ask if someone knows a way to get around this issue. I found some language changing topic here, but I cannot find any spanish rom for this one to use a suggested method to replace the CEOS.nbf while running the original rom update.
See:
http://forum.xda-developers.com/showthread.php?p=1064789
Maybe someone managed to find a rom update for this model and would like to help out. I'm also more than willing to pay a few bucks to get my G100 set.
Any ideas? Links? Suggestions?
Thanks
xiii .... I have the same problem.
any help?
I love my iPaq to death. I really do. But I want to stab Windows Moblie 5 in the eye IN THE EYE. Particularly since I have version 1.0.1. Can some kind folks recommend me the version/custom-build of WM6 that works best with the hx2xxx or even better the hx24xxb? I am eternally in your debt for saving me from the monster that is WM5.
Sincerely,
GK
Hello? Anyone?
check my website out, http://wm6.flyingarizona.net
Alright, I'm running into problems. I can hard-reset just fine, but when I try to get into the white bootloader, I just get a white screen, no USB anything. I've tried both 1.02.00 h and 1.00.00 h. Both do the same thing. Also, when I try to flash to the WM6 rom, I get an Invalid SKU error... I realize you guys are all very busy and tired of the WM6 problems, but could someone PLEASE help me?
Read this thread:
http://forum.xda-developers.com/showthread.php?t=329079
I think you will find all the answers
dpdurst, I have check your website, and notice that the ROM is for Hx2750, I have an iPAQ hx2495b with 192 mb ROM. Do you think if it will work for me?
Thanks
The roms for hx2000 series work and your device. And I think that the procedure is the same or very similar like for hx2490b, and for this reason I suggest the thread at my above post.
Hi dancer_69, I have just yesterday upgrade my hx2495b to WM6 using dpdurst ROM. But I have a question, why I cannot user messenger?
Just download an updated version, I think you can find it here in the forum. Use search