Hi all
my older phone was replaced by orange. Installing TomTom on my new M2000 was OK, but I am unable to get an GPRS signal.
Would somebody know if the M2000 / Qtek9090 is compatible with TomTom3?
How would I setup up bluetooth correctly?
Might a bluetooth driver update solve the problem?
Thanks for your feedback.
I'm using tomtom3 with an Xda2s (O2's branding of the Qtek9090) and it works a treat. I recommend using the lastest Rom upgrade though.
If you have a rom version earlier than 1.72.00 you need BTH tools. From 1.72.00 on you should be ok. Let the unit bond, choose serial port profile when asked. (use outbound com5)
In TT GPS setup choose NMEA bluetooth and com5. Then tick the blue box on the upper left.
@pleun : 1.72 is for himalaya not blue angel
yup, my bad... read too fast
Hi there,
I have an O2 XDAiis. I would like to put the sim card from this into my Nokia 6230i and use my XDAiis as a PDA connected to my mobile through bluetooth. I have a IPAQ and am able to connect it to to my Nokia 6230i through bluetooth dialup networking but I cannot seen to be able to do this on my XDA. The connectivity I would like is a dialup modem and GPRS… please help
Thanks
Fiona
PS I am using the latest rom and bluetooth drivers from O2
Hi,
Yeah, the bluetooth seems to be cripled to stop you connecting via another mobile phone and make you use the operator it's got a SIM card for.
I would love to do this to - my blue angel is now my 2nd phone/pda/satnav and GPRS is expensive - if I want to use cheaper GPRS in it i've got to swap the SIM card with my main phone
I've looked about quite a bit but can't find any kind of info or workaround.
Ian
im having trouble getting the blue angel to send any files to other devices via BT. I have a c500 which is set to discoverable and the Bluey sees it but if when using resco file explorer u select a file to send the follwoing prompt appears on the angel "The connection to the peer bluetooth device failed"
Its drivin me bonkers.
does anyone know what the hell is up before i buzz the lot inbto the sea out of sheer frustration
reagrds
also if u use the bt connection wizard on the blue angel and say browse files on a remote device. Again the spv500 shows as selectable but this is the follwoing prompt "service discovery was unsuccsessful. please make sure the remote device is turned on (it is!!) Bluetooth is enabled (it is!!)and the device is discoverable (again it is!!!)
Aaaaargh
Sell it on eBay
Hey all,
I've got a bit of a problem. Since the release of wm5 AKU 3.0, BT DUN is no longer present, instead we are supposed to use BT PAN. I read the articles in which microsoft explains why they removed it, and also that it is optional in WM6. I saw the .cab files in MUN's WM6 thread but I can't get them to work.
I use BT DUN to dial in to my domain with my VPN at the windows logon screen. BT PAN is about as useful as a frying pan in this case because I need to be logged in to connect BT PAN...I think they call that a conundrum
Anyway ever since I've had the trinity I have been using ICS with USB which does auto connect before logon. The thing is I prefer BT because it is just simply more convenient.
If anyone has a solution, either buy adding a working BT DUN profile or with BT PAN I'd really like to know about it.
Look here:
http://forum.xda-developers.com/showthread.php?t=307235
I already read that thread but it's a no go
I also would really need the DUN Profile, but it does not work on mine too...
I just went and tried superdave's widcomm stack for the hermes, no joy though.
I'm running WM6 SE (not TE) and my DUN profile is flawless.
Use it from my TomTom 910, laptop and work PDA.
Wish PAN was supported by other devices so I could use all 3 at once.
what's WM6 SE?
and where can I get it?
OK, this may be a bit naive, especially since T-Mo is rumored to stop tethering on the TM506 in later updates (heaven forbid SIM provisioning), but I would like to tether the Dash to the TM506, like a PC, via BT and only have data on the TM506. I really love my Dash for now and the TM506 has HSPDA 3.5G. Can this be done? Can any additional WM6 software accomplish this?
Bluetooth Dunn
GJSmith3rd said:
OK, this may be a bit naive, especially since T-Mo is rumored to stop tethering on the TM506 in later updates (heaven forbid SIM provisioning), but I would like to tether the Dash to the TM506, like a PC, via BT and only have data on the TM506. I really love my Dash for now and the TM506 has HSPDA 3.5G. Can this be done? Can any additional WM6 software accomplish this?
Click to expand...
Click to collapse
Find my thread on Bluetooth Dun, it has the software you need, just install it on your T-Mobile Dash to the main memory. If you cannot find it get back with me...........!
Thanks for the quick reply and advice.
I'll search your threads to find the DUN Posts and post back in a few days. So I quess the Dash can dial to T-Mo 3G using the TM506 modem via BT. Great!
I just wonder if there is a way to configure DUN without it eating minutes. Previously, when I set up connection teaming on a laptop with the Dash and a Samsung T409 using DUN, minutes on my plan began to mysteriously get used.
Is it possible to use T-Mo DUN without eating minutes off your plan?
That Sony Phone Is Now In T-Mobile Stores
GJSmith3rd said:
Thanks for the quick reply and advice.
I'll search your threads to find the DUN Posts and post back in a few days. So I quess the Dash can dial to T-Mo 3G using the TM506 modem via BT. Great!
I just wonder if there is a way to configure DUN without it eating minutes. Previously, when I set up connection teaming on a laptop with the Dash and a Samsung T409 using DUN, minutes on my plan began to mysteriously get used.
Is it possible to use T-Mo DUN without eating minutes off your plan?
Click to expand...
Click to collapse
That's a beautiful little Sony phone, I saw it in the T-Mobile store yesterday. I believe it will work, if you cannot find the software, I will PM you a link to the BT dunn software a little bit later. I got to find it also, but I have it.........!
I found it
Look for a PM in the next 10 minutes.........!
The BlueTooth Dunn File
Below is the BT dunn file, install it to the main memory, you still will need the configuration set up.........!
Technology said:
Below is the BT dunn file, install it to the main memory, you still will need the configuration set up.........!
Click to expand...
Click to collapse
Thanks, I still have it in my downloads from the last time you helped me. I didn't really need it then because my modded Dash had BT DUN enable for PC to Dash modem. Hope it works for Dash to TM506 modem.
Update: I installed the app to main memory but I don't see a program link or folder in program files. I'm guessing something went wrong but the install was reported as successful.
Nothing is Wrong
GJSmith3rd said:
Thanks, I still have it in my downloads from the last time you helped me. I didn't really need it then because my modded Dash had BT DUN enable for PC to Dash modem. Hope it works for Dash to TM506 modem.
Update: I installed the app to main memory but I don't see a program link or folder in program files. I'm guessing something went wrong but the install was reported as successful.
Click to expand...
Click to collapse
Nothing is wrong, it's there, you will not see anything, but it will work, pair the devices. Let me know how things work out for you....!
Sorry, Techhology but I still can't figure this out. The Bluetooth services of the TM506 only list Input Device and Serial Port. Give me a few more pointers. Thanks.
Print A Picture
GJSmith3rd said:
Sorry, Techhology but I still can't figure this out. The Bluetooth services of the TM506 only list Input Device and Serial Port. Give me a few more pointers. Thanks.
Click to expand...
Click to collapse
Print a picture of what you are working with on the Sony TM506, I would love to make this work. Another thing did you get the 2 devices paried.......?
Yes the devices are paired. The TM506 sees these services on the Dash: Object Push, File Transfer, Audio Remote Control and target. The Dash sees these services on the TM506: Input Device and Serial Port.
It appears that the SE PC Suite connects to the TM506 through BT serial port. You can also use BT dial-up networking directly instead of BT serial port.
If it were possible to have the Dash use the BT serial port on the TM506, like the SE PC Suite, then it might work. But I can't find any function in the Dash to do this.
I was also successful in connecting two PC's to the TM506 via BT. One via BT DUN and the other via BT PAN. The PC's had internet but the connections seemed very slow.
Do You Have 3g On The Sony TM506
GJSmith3rd said:
Yes the devices are paired. The TM506 sees these services on the Dash: Object Push, File Transfer, Audio Remote Control and target. The Dash sees these services on the TM506: Input Device and Serial Port.
It appears that the SE PC Suite connects to the TM506 through BT serial port. You can also use BT dial-up networking directly instead of BT serial port.
If it were possible to have the Dash use the BT serial port on the TM506, like the SE PC Suite, then it might work. But I can't find any function in the Dash to do this.
I was also successful in connecting two PC's to the TM506 via BT. One via BT DUN and the other via BT PAN. The PC's had internet but the connections seemed very slow.
Click to expand...
Click to collapse
Ok, you will not see anything the Dash but the BT dunn file are there. Do you have a BT set up on the TM506?
Somthing tells me this would have been easier with a PPC instead on a Smartphone. GRIN
I can use DUN from a PC to both the TM506 and the Dash just fine. But I can't seem to figure out how to use DUN from the Dash to the TM506.
Many BT profile features on the TM506 are not visible to the Dash. Especially DUN and PAN. The BT serial port is visible but theres no application on the Dash to take advantage of this like the SE PC Suite does.
I've attached a picture of the BT services provided by the TM506 to a PC using the Widcomm BT stack.
Looks like the picture is too small. I'll try to post a better one.
Larger Photo of TM506 BT service to a PC with Widcomm BT Stack. The SE PC Suite uses the Serial Port to connect. Use can also use Dial-Up directly. In the photo I was using PAN - notice the green connected icon.