hi all,
although i'm not using bt, its indicator flashes all the time any ideas?
have you tried pressing the icon for bluetooth and turning it off ?
c'mon buddy it's off and it's flashing that's why i'm asking
did you install another bluetooth stack along with the one it came with like vidcomm ?
did you install bluetooth tools ?
it's the blue one you mean right ?
nope it's like this since i installed flshthemespro
still the same although i uninstalled it
dont really know what flshthemespro is
but i guess you could try doing a full backup using activesync
and then hardreset and see if it still does it
if it does something is wrong
if it dont try restoring your backup and see if it does it still
if it does i would blame one of the programs installed
thanks pal
Related
hey guys,
my green answer call button doesnt seem to work. i'm wondering if its the rom or the phone. it still lights up but doesnt respond when i push the button.
any suggestions like a button tester program?
kind regards,
jason
Are you having any problems with any other keys?
If its just the one you can break your phone down and check your connections and see if anythings loose or damaged. Make sure to go to the Wiki and check out the guide on how to properly take your phone apart.
everything works except for that the green phone button
Starting to wonder about malfunctioning buttons posts
I myself posted a thread on my malfunctioning power button . I am getting the feeling that certain apps and tweaks are causing some of these malfunctioning hardware buttons to happen. Not exactly a scientific point of view, but I think lots of this button malfunctioning (no matter which one), can eventually be resolved by HR or as mentioned in another post, Clear Storage. I myself, within a minute, pulled out my SDMicro card out for 15 seconds, took off Quickmark application (last app or cab put on my system), and my power button turns on/off as it should. I had to resort to SR's when I had my problem..........................
Latest: Found out that my main problem was NOT any of the above,, it all seemed to occur because of a buildup of Notification Queue's,, so check that out... I think that those queue's can be a source of a lot of problems
cheers for that suggestion.
softreset doest fix it so i will have to resort to hard reseting.
lucky the vodaphone version has the 3G phone button and i can use that to get to the dial pad but it then assumes my calls are 3G which are annoying
has anyone got any suggestions then?
i flashed K's new rom and still my 'Green Answer Phone' button doesnt work.
thanks in advance for any help
jason
jasonchiu said:
has anyone got any suggestions then?
i flashed K's new rom and still my 'Green Answer Phone' button doesnt work.
thanks in advance for any help
jason
Click to expand...
Click to collapse
i had a similiar problem when installing a different dialer via cab.
i would suggest to either install a naked rom (like pandora naked) or one of the older roms (like schaps v3.x).
do not install any other cabs and see if the green button is working.
i flashed pandora naked rom and it still doesnt work.
any one have any other suggestions?
if not will i have to take the phone apart :S?
the Irda doesn't work at all, when i install a program to use my tytn as a remote for my tv, and i try to clone my remote i get an error saying "Irda port being used by another application"
and it wont communicate with over devices via Irda. other than that it works great...does anybody know a way to fix this problem?
p.s. tried other roms, Irda works fine, so it's not the phone.
please help this lost soul!!
thanks!
sorry, posted in wrong area! rookie mistake! forget about it!
A general rule I follow is not to use too many .cabs as certain apps and tweaks can cause some of these malfunctionings to happen.
You cant be installing cabs for everything on your phone. Do you really have so much space in your phone?
hey guys i thought this was a thread about getting my green answer call button working again!
seem like more of a hardware problem to me. you can still try checking for bad blocks, flashing another radio, but that all may be futile. look up the disassembly guides in the wiki. mikechannon also has some stuff on that, if u click on his sig
Hello people, I really need your help with this one..
I have the o2 XDA Trion, with their OEM firmware of WM6. Everything was working fine, but just recently when ever the screen goes into standby(Turns off which ever jargon you may use) then no notifications will happen; however if the phone is active.. with the light on then all notifications happen fine.
I have just flashed the firmware again last night using the softkey and soft reset.. then I installed VJToggle(For buttons on today screen), Rltoday, SL2U(Apple slide locking program).. it still does it! I removed each application and still no joy.
I am starting out with an absolute clean install this morning and hoping that my problems are resolved.. has anybody have any ideas?
I will keep you posted
The problem still exists... The only application I have installed/used is PIMBackup.
So I am going to restore the phone once again and NOT use PIMBackup to see if it makes any difference...
Hasn't anybody got any suggestions for me?
I really need them.
Thanks,
Colin Jensen
I don't know if anybody else has experienced this... maybe it is just my ROM.. I am using the O2 WM6..
If I use PIMBackup then it causes all the problems above.
Problem solved(Hopefully).
you can try other roms and see if they have the same problem.
Try one of the more popular ones
like schap's roms or K's roms
Hi there, i've been using my KAISER for long time without SIM card. Now i've bought new SIM for this sweetie, however when i tried to call some1 for the first time it was without any problem. Second time there was no sound.. But it disappeared for all device (no media sounds, no alarm and phone). Firstly I thought that it was caused by bad ROM so i managed to reinstall it.. The same problem occured, ive installed different rom.. the same problem.. ive flashed windows rom and everything was alright.. Do anyone know solution of this problem or will i have to get back to that shi**y WM?
Probably is a radio problem, change the radio firmware.
slunlcko said:
Hi there, i've been using my KAISER for long time without SIM card. Now i've bought new SIM for this sweetie, however when i tried to call some1 for the first time it was without any problem. Second time there was no sound.. But it disappeared for all device (no media sounds, no alarm and phone). Firstly I thought that it was caused by bad ROM so i managed to reinstall it.. The same problem occured, ive installed different rom.. the same problem.. ive flashed windows rom and everything was alright.. Do anyone know solution of this problem or will i have to get back to that shi**y WM?
Click to expand...
Click to collapse
It has happened to me a few times, usually after listening to music with connected headphones. Sometimes when you disconnect the headphones the phone still "thinks" that the HP are connected. It might not be your problem but it's something you might want to investigate if you lose audio after listening to music but as l1q1d mentioned before it's probably a radio related problem.
Problem solved.. it was caused by unlocking kaiser for new SIM from new provider.. It changed my radio however phone was still showing radio 1.70.xx.xx so Ive tried to reflash radio.. and i can call!! THX to you l1q1d.. you're my xda GOD ..
-Arturo- said:
It has happened to me a few times, usually after listening to music with connected headphones. Sometimes when you disconnect the headphones the phone still "thinks" that the HP are connected. It might not be your problem but it's something you might want to investigate if you lose audio after listening to music but as l1q1d mentioned before it's probably a radio related problem.
Click to expand...
Click to collapse
For this i found easy solution... when u want to pull out your headphones just stop the music, lock phone unplug them, plug them.. unlock phone and uplug them.. it was working for me all the time.. I know stupid.. but helpfull
My problem is , that my FM Radio doesn't work....I GET ONLY STATIC i discovered that after few months, cause i never used, and without beingn a big issue is like a splinter in my mind, that is somethig on my phone that doesn't work
i've tried reverting phone to stock, 1.32, 1.72....almost every custom rom, Lee, Miui , Cyanogen..etc, changed RADIOS and headsets...but nothing seemed to work
well the next step is to revert-it to stock and send it to waranty...but from various reasons i'm very reluctant in doing that
so is there anyone who encountered the same problem ????
Do you have head phones plugged in? Sometimes they are used for antennas
Sent from my HERO200 using XDA App
Kaoshin said:
Do you have head phones plugged in? Sometimes they are used for antennas
Sent from my HERO200 using XDA App
Click to expand...
Click to collapse
WHAT DO YOU THINK....that i flashed diffret radios and ROMS....and i forgit too plug in the headsets ....and i said...i've tried diffrent headsets.....
anyway ..tnx for trying to help
Saluco said:
My problem is , that my FM Radio doesn't work....I GET ONLY STATIC i discovered that after few months, cause i never used, and without beingn a big issue is like a splinter in my mind, that is somethig on my phone that doesn't work
i've tried reverting phone to stock, 1.32, 1.72....almost every custom rom, Lee, Miui , Cyanogen..etc, changed RADIOS and headsets...but nothing seemed to work
well the next step is to revert-it to stock and send it to waranty...but from various reasons i'm very reluctant in doing that
so is there anyone who encountered the same problem ????
Click to expand...
Click to collapse
I've just remembered I've got some headphones in the drawer here at work, so I thought I'd give it a test for you - worked straight away mate!
First time I've even tried the radio, had to search for the app to turn it on Running ARHD 5.1.3 (until 5.1.4 gets released hopefully soon!)
Lanky Git said:
I've just remembered I've got some headphones in the drawer here at work, so I thought I'd give it a test for you - worked straight away mate!
First time I've even tried the radio, had to search for the app to turn it on Running ARHD 5.1.3 (until 5.1.4 gets released hopefully soon!)
Click to expand...
Click to collapse
thats exact how it hapends...i didnt evere tried ...but when i tried ups...ands its do no,, some how, annoyin, to know that i have a BUG
I'm sorry I can't remember the specifics of it, but I had this problem. It turned out it was a quirky fix. I think I had to plug in the headset, start the radio, then click menu > speaker, then menu > headset & it worked. I only had to do that the first time I used the radio in a particular ROM. That sequence has been talked about in another thread here. That's where I found it originally.
Saluco said:
My problem is , that my FM Radio doesn't work....I GET ONLY STATIC i discovered that after few months, cause i never used, and without beingn a big issue is like a splinter in my mind, that is somethig on my phone that doesn't work
i've tried reverting phone to stock, 1.32, 1.72....almost every custom rom, Lee, Miui , Cyanogen..etc, changed RADIOS and headsets...but nothing seemed to work
well the next step is to revert-it to stock and send it to waranty...but from various reasons i'm very reluctant in doing that
so is there anyone who encountered the same problem ????
Click to expand...
Click to collapse
Hi,
Yes I have the same issue mate,
just got the new HD (on net) and didn't test the radio prior to rooting and applying custom rom (coredroid).
did note the wireless was hopeless on the original rom prior to upgrade.
I opened Fm radio and scanned (as i have on my 3 other htcs in the family) and no channels are being picked up, changing locations, headsets etc no difference.
I have reflashed different radios, no diff
reflashed stock 2.2 flashed several radios and kernals, no diff
restored my custom image with recommended radio versions, no diff.
I have given up, it looks like its possibly a warranty issue, but i am reluctant to go through the BS just for the radio
Any fixes?
Col
any developers thoughts on this?
Col
how mines worked...use headphone as an antenna
Static reduction methods
did you try to use the headphone as an antenna? Raise the headphone higher make it act like an antenna, and put device/phone on speaker.
edit: and sometimes leave fm radio on and minimize it/push home button
It reduces the static for me.
Ok so having changed Rom recently from cm7 to leedroid all of a sudden the location service keeps starting up by itself and is wrecking my brain so bad i want to throw the phone at the wall!!!!
it starts up all the time even during calls which puts the phone onto loudspeaker, any ideas how to uninstall location as i dont use it anyway, or anyone got any suggestions as to a rom that doesnt have it on ?
Any help greatly appreciated
I remember reading something somewhere about the phone thinking it's being connected to a car dock all the time. It sounds like that's what is going on in your case, it would explain the GPS and the loudspeaker for calls - this is what you want when you're connected to a car dock.
If you don't use the car dock (I have never used it but I know people do) you could uninstall it, see if that fixes it
edit: found this http://forum.xda-developers.com/showthread.php?t=901175
yeah found that one myself mate thanks, i uninstalled locations through cmd then switched off plugged usb in and switched on, this worked but only for one or two calls. gonna have a look and try uninstall the car dock app, if anyone knows how to do it , that would be great !!!
tommytenbellies said:
yeah found that one myself mate thanks, i uninstalled locations through cmd then switched off plugged usb in and switched on, this worked but only for one or two calls. gonna have a look and try uninstall the car dock app, if anyone knows how to do it , that would be great !!!
Click to expand...
Click to collapse
Search for SystemApp Remover. It allows you to remove system apps.
joooe said:
Search for SystemApp Remover. It allows you to remove system apps.
Click to expand...
Click to collapse
or Titanium Backup is a free option that does the same plus more
Good luck with it