GSM ERROR IN BOOTLOADER. DOES ANYONE HAVE GSM ROM. ALSO WHEN I PUT IN THE CHARGER, THE CHARGING LAMP DOEN'T TURN ON.
I CHECK ON DEVICE INFORMATION AND SEE THAT rOM VERSION:
3.17.03 ENG
ROM date 05/15/03
Radio Version: Not appear
Protocol version: not appear
Any one can help me to solve this problem or have any information to share. thanks.
I have the same problem here !
ANY ONE HELP
don't try to upgrade RSU ........... that kill ur device
in the same problem that iwrote in this forum
http://forum.xda-developers.com/viewtopic.php?t=9709
i have 2 dead xda and now i resuruct it in 1 ........ very tried ........
find to use repair.zip .... if cannot find it email to me ......... lucky to u
Related
hello i own this ASUS P505 , it's great hardware , but mine it's locked and i found this thread http://forum.xda-developers.com/showthread.php?t=242585 tried the app , but with no succes because my radio vers is 4.5.0
then i google another radio firmware , lower than mine , but found none.
still i've entered both ASUS ftp servers : ftp.asus.com.tw and ftp.asus.com/pub/asus/IA/P505 found some older ROM's but when i try to load it , in bootloader mode , it says : "old version" . my ROM vers is V31371_ITA
now i know this PDA has an Infineon Baseband processor , @ 40Mhz , so after google-ing more info about unlocking , i've found none relevant and no previous radio version.
I think that it's possible to dissmentle older ROM's that we can download from ASUS FTP and then make an utility to load the old radio ROM , there on the FTP is this file P505FW450.exe that is runable from PDA and this loads Radio vers 4.5.0 to P505.maybe by reverse engeneering we can see how is doing that . i am a newbie compared to XDA developers but willing to learn
Any XDA Developer could help me?
this must be read by someone..
if anyone can help me..this would be great !
Up 4 reading!
anyone?
up
no update??
I have a Touch Diamond.
its unlocked and has the latest Rom from HTC from 2009-02-27.
RomVersion : 2.03.421.2 WWe
Rom Date : 12/24/08
Radio Version 1.09.25.23
Protocol version : 52.51.25.26H
The issues i've got are:
1. the camera does not work , it freezes can get it to take a picture.
2. the g-sensor calibrates ok but does not work.
3. cant update the rom to anything other than the original one from HTC updates stops at 0% and then failes.
Please can anyone help me.
I bought this phone second hand.
Sorry if this is in the wrong area!
try here
http://forum.xda-developers.com/showthread.php?t=409425
good luck and get reading
Thanks , managed to get it to flash now.
camera does still not work
hummm
you can always try a cooked rom
atleast you up and running again
thread closed
Hi everyone, I need help!
I bought a new HTC magic from ebay, all the guy did was open it and add the hero ROM, but it is running really slowly.
I tried to use the overclocking widget but it didn't work as it says it needs a rooted phone.
How can the phone have the hero rom n it without being rooted?!
Also, how can I now increase the speed etc and stop it reloading the homepage everytime I press home (30 seconds odd!).
It's a Google branded Vodafone.
Welcome to forums
Perhaps try to disable some of the today UI´s
or reinstall another ROM
Have a deep read in the Wiki:
http://wiki.xda-developers.com/index.php?pagename=HTC_Sapphire
Hope it helped and good luck,
orb3000 said:
Welcome to forums
Perhaps try to disable some of the today UI´s
or reinstall another ROM
Have a deep read in the Wiki:
http://wiki.xda-developers.com/index.php?pagename=HTC_Sapphire
Hope it helped and good luck,
Click to expand...
Click to collapse
Thanks Orb.
Sorry but i'm a complete noob!
Do you know why it appears its not rooted even though its using the hero rom?!
Just looking at the system info it says...
Model number: HTC Hero
Firmware version: 1.5
Baseband version: 62.50s.20.17h_2.22.19.261
Kernal version: [email protected] )
Build number: 1.76.405.6 146733 cl#47214 release-keys
Software version: 1.0.0.a6288
Ok, I've managed to install the drivers for vista but I still can't access the phone through the pc (not even the windows mobile program), any ideas?
Also, my phone IS rooted.
When I download a ROM, the wiki guide says run the .exe but they don't have executable files!
Confused!
I need to submit my phone for warranty due to screen crack. I was on the custom ROM and now followed instructions to put in original SPL and ROM - can someone please confirm if the details are OK now based on what is mentioned below: The SPL is showing as SPL 0.79.000 and I have the official Radio and ROM installed. Is this good enough?
edit: thiws phone was bought directly from expansys (unlocked) in UK and used in UK.
Can someone please confirm so I can send off
Many thanks in advance!
On Hard Boot:
B 80
R 4.49.25.91
G 61.44.etc.25.35u
On Bootloader
RHOD100 32M SSDC
SPL 0.79.000
MicroP-Rhodium(LED) vA
MicroP-Rhodium(LED) v4
Turbo HW/Turbo SW
TP MFG DATA
504,520 805,843
802,199 202,198
205,845 Calibrated
About in Settings:
Model : HTC Touch Pro2 T7373
OS: 5.2.21887(21887.5.0.86)
Manila: 2.5.20121225.0
Date: 2/4/10
Radio: 4.49.25.91
Protocol: 61.44etc.25.35.u
** Bump ** comeon guys - just looking for a confirmation here if this is OK - I have read the forums - but just want someone to confirm that I have the correct ROM/SPL in place for warranty?
devdarshan said:
** Bump ** comeon guys - just looking for a confirmation here if this is OK - I have read the forums - but just want someone to confirm that I have the correct ROM/SPL in place for warranty?
Click to expand...
Click to collapse
0.79.0000 SPL seems to be just fine
That looks perfect
Sent from my BLAZN 2.2.2 using XDA App
I have to take my Sprint TP2 back for warranty if I cannot get it to sync.
How do I strip everything off and do one of the following:
start from scratch with EnergyROM
reinstall the factory junk and get a new phone under warranty (so I need to know how OP did it, please)
hello
first i want to say is i tried everything here all solution did not work for me i have bluetooth problem not activating when i tape bluetooth icon it become white for 5 sec and go back grey i used solution for bricked device, i rolled back to stock rom , i flashed the update.zip and flashed other custom rom but nothing works
everything is working normaly except blutooth??? i have htc desire o2 uk with cm 7.1
bootloader say:
revolutionary
bravo pvt4 ship s-off
hboot-6.93.1002
microp-051d
touch panel-synt0101
radio 5.17.05.23
please somebody help
ps:sorry for my english
After you activate the bluetooth, open a terminal and type dmesg.
You can redirect the output to file.txt by typing "dmesg > /sdcard/file.txt" ( without quotes )
Paste the output here please.
Not sure, but this may be due to the radio.
Seems you have the latest stock radio http://forum.xda-developers.com/showthread.php?t=687464
Please take a look here too http://forum.xda-developers.com/showthread.php?t=902752
And please read a lot about it before trying something, not sure but I think you can brick your device by flashing radio..
dqb said:
After you activate the bluetooth, open a terminal and type dmesg.
You can redirect the output to file.txt by typing "dmesg > /sdcard/file.txt" ( without quotes )
Paste the output here please.
Not sure, but this may be due to the radio.
Seems you have the latest stock radio http://forum.xda-developers.com/showthread.php?t=687464
Please take a look here too http://forum.xda-developers.com/showthread.php?t=902752
And please read a lot about it before trying something, not sure but I think you can brick your device by flashing radio..
Click to expand...
Click to collapse
thank you
the txt is very long i copy somthing in particular because it seem to repeat??
and the radio thing i can use radio from newer desire can resolve the probleme??
please help!!!
You can copy/pasta to pastebin or someting like that, and paste the link here.
One question, how did you use the bluetooth ? Just by using widget ? Because you have to go in bluetooth settings, activate bluetooth here, make the device identifiable ( by default 120 sc ) and use it.
For the radio, I prefer you wait somebody who knows the subject better than I.. But yes i think it could resolve the problem if it's a problem of this kind.
I personnaly use 32.54.00.32U_5.14.05.17. It's older than yours but it works like a charm.
dqb said:
You can copy/pasta to pastebin or someting like that, and paste the link here.
One question, how did you use the bluetooth ? Just by using widget ? Because you have to go in bluetooth settings, activate bluetooth here, make the device identifiable ( by default 120 sc ) and use it.
For the radio, I prefer you wait somebody who knows the subject better than I.. But yes i think it could resolve the problem if it's a problem of this kind.
I personnaly use 32.54.00.32U_5.14.05.17. It's older than yours but it works like a charm.
Click to expand...
Click to collapse
thanks
here the link http //pastebin com/ 6Jdx5nE4
the blutooth not activating at all with widget or in the menu or in es explorer...
when i activate it it turn white a few second and then become grey!!
before when i restart the device and activate it it worked but i wanted to get rid of this probleme once for all so i wanted to revert to stock this was a big mistake now its not working anymore!!
I see nothing related to bt :/
Could you please post a logcat output ? You can do it easily with catlog app
ok here the link http // pastebin com/ yxNhjmZC
and look to device info radio unknown????
build.board: bravo
build.bootloader: 6.93.1002
build.brand: htc_wwe
build.cpu_abi: armeabi-v7a
build.cpu_abi2: armeabi
build.device: bravo
build.display: GWK74
build.fingerprint: htc_wwe/htc_bravo/bravo:2.3.3/GRI40/96875.1:user/release-keys
build.hardware: bravo
build.host: kangtastic
build.id: GRI40
build.manufacturer: HTC
build.model: HTC Desire
build.product: htc_bravo
build.radio: unknown
build.serial: HT13SPL00269
build.tags: release-keys
build.time: 0
build.type: userdebug
build.user: rmcc
version.codename: REL
version.incremental: eng.rmcc.20120314.152702
version.release: 2.3.7
version.sdk_int: 10
i hope this help
thanks
Hello,
I just looked quickly your logcat, and you can see it :
Code:
E/bluedroid(185): bt_enable: Timeout waiting for HCI device to come up
^research is nedded
I'll look this night, i'm goign to sleep.
I'll look for the build.radio too, please be patient and don't flash your radio on a whim, because there's a risk of brick..
dqb said:
Hello,
I just looked quickly your logcat, and you can see it :
Code:
E/bluedroid(185): bt_enable: Timeout waiting for HCI device to come up
^research is nedded
I'll look this night, i'm goign to sleep.
I'll look for the build.radio too, please be patient and don't flash your radio on a whim, because there's a risk of brick..
Click to expand...
Click to collapse
thanks i will be patient
I FOUND A FIX!!!!!!!!!!!!!!!!
after a month of searching and trying every solution flashing a lot of rom i found a solution!!!
with rom manager i did fix permission and IT WORKED!!!!!!!!YATTA!!!
after all this the solution was SIMPLE...hope i help other people having this probleme!!
@dqb thanks for your help you show me the way
Hello Daiksi
Well done !
Thank you for posting your fix, it will surely help other people