Need orginal AT&T sx56 2002 rom - Upgrading, Modifying and Unlocking

After a hard drive crash, I was not able to recover this rom-file.
If somebody still has a old version saved and willing to give it to me , I would be glad.
AT&T sx56 orginal 2002 rom
I also heard that that WM2003 version A.30.05 ENG and A.33.01 Radio Stack for older sx56 is circulating.
My sx56 had problems with GPRS after upgrading, and i hope the older
stack will help..
This would help too.
Thanks in advance
Tom

Tom,
I'm uploading the original SX56 ATT Wireless ROM image to:
http://www.iw-global.com/downloads/SX56ROM/
There you will find a file: NK.nb1
Currently I'm in the upload processs, will take some time because the file size is 32,247,712 bytes.
Please check that the file reach the proper size until until start downloading.
I already used this file before in an emergency.
Presently I'm using the latest T-Mobile 2003 ROM on the SX56.

Related

QTEK 2020 upgrade

Well here it is . I have upgraded my qtek with http://www.qtek.nu/files/RUU172752WWE.zip from1.66 to 1.72. I did not hard reset the device before the upgrade so I had some problems during upgrade bit now all is ok. If anyone wants to upgrade also please find the solution for the country ID problem that mey occur. http://forum.xda-developers.com/viewtopic.php?t=12100 I DID not have that problem but you might. So before the upgrade please inform yourself about the problems that you may face.
Langurage ID error 121 during upgrade
Hello,
I get the language ID Error 121 when trying the Upgrade to my Qtek 2020 French version Rom 1.66.02 FRA radio 1.10.00 Version de proto 1337.18 Version de Extrom 1.66.219
I want to use my Qtek in English that is my goal.
Thanks is advance
Re: Langurage ID error 121 during upgrade
mghinc said:
Hello,
I get the language ID Error 121 when trying the Upgrade to my Qtek 2020 French version Rom 1.66.02 FRA radio 1.10.00 Version de proto 1337.18 Version de Extrom 1.66.219
I want to use my Qtek in English that is my goal.
Thanks is advance
Click to expand...
Click to collapse
You need to alter the ROM headers. See my post here for details on how to do it and also on how to avoid future problems.
I get the error not a valid win32 app when opening himagetda
I cant open himagetdevicedata.exe because i get the error not a valid win32 app when opening himagetdata.exe Also, when I upack ruu166150wwe I cant find the directory with the subdirectory containing the files himaclearjumpcode etc.
Thanks again in advance
I got to the Himaclearjumpcode using winrar thanks now
I just need to load himagetdevicedata.exe to load onto my qtek 2020
rom 1.66.02 FRA
date of rom 02/03/04
radio 1.10.00
de proto 1337.18
de extrom 1.66.219
My Qtek had the higher rom on it when i bought it but I was todl I needed to downgrade the rom to make it work in English. I have not been able to get it to work and I wonder do I need to upgrade the French version before changing to English. I just want it to work in English.
Thanks in advance
I forgot to mention that I am using Guest with my USB Active
sync 3.71. I copy the himagetdevicedata into the Mobile Device and I can see it on my qtek but I just cannot open it. That is the problem.
Thanks and sorry for so many posts
Re: I forgot to mention that I am using Guest with my USB Ac
mghinc said:
sync 3.71. I copy the himagetdevicedata into the Mobile Device and I can see it on my qtek but I just cannot open it. That is the problem.
Thanks and sorry for so many posts
Click to expand...
Click to collapse
You need to execute HimaGetDeviceData.exe on the device directly by tapping on it. Then copy the DeviceData.txt file it produces back onto your PC and view it with Notepad on your PC.
I have encountered an problem with bluetooth. I am trying to conect to gprs using Qtek 2020 with Nokia 6600 and P900. Before upgrade it went smoothly now not. So I am conecting to gprs via 6600 or P900 and it is not working
I try to execute the himagetdevice data by tapping on it
on my Qtek but it will not open. I copy it successfully on my laptop then it loads onto my Qtek but when I tap it to open, nothing happens. In other words, I cant open it. I also used winrar to get to the upgrade files himaclearjump, himagetdevicedata, etc but I cant take them from winrar to my Qtek. Is that because I did not buy winrar? I have upgraded my windows to SP2 so the program unzips automatically and I cant find the individual update files like I can in winrar.
Thanks
Re: I try to execute the himagetdevice data by tapping on it
mghinc said:
on my Qtek but it will not open. I copy it successfully on my laptop then it loads onto my Qtek but when I tap it to open, nothing happens. In other words, I cant open it. I also used winrar to get to the upgrade files himaclearjump, himagetdevicedata, etc but I cant take them from winrar to my Qtek. Is that because I did not buy winrar? I have upgraded my windows to SP2 so the program unzips automatically and I cant find the individual update files like I can in winrar.
Thanks
Click to expand...
Click to collapse
Please follow the instructions in my post here. Most of what you have been asking is covered in there.
To answer your questions anyway, when you run HimaGetDeviceData on your device there is no visual indication that anything has happened, but a file called DeviceData.txt will have been placed in the Windows folder of the device. No other files should be transferred to your device, as the upgrade process itself is run from the PC.

upgrade win2003SE

Hi All
New here so please be kind,
I have an O2 IRL XDA II and wish to update this to the new win version above, I did manage this but lost all conenction settings for MMS, WAP and gprs when done.
Is there some file(Cab?) that can be installed after the fresh install to give me these settings again and if so how is it run?
Thanks
Darren
edited for more details
You must take the file from any one from your friend have a PPC phone edition that runs on win 2003 se
you need the program that opens extended rom and I think you have it , so open your extended rom by clicking on start - programs - extrom tools - unhide and unlock , after that restart your device and open your file explorer and you will see there's extended rom direcory revealed , open it and you will see extended rom installation program file there , copy it to your friend device ,install the extended rom program on his device and open his extended rom like what you did on your device ( don't click on unlock , it will show error on his device ) and you will see his files and the file setting for mobile telecommunications
companies copy the file you want on your extended rom and open your config file that inside the exteded rom directory and add list as list above ( cab ://my device/extended_rom/ (your file name.cab ) )
it will be installed after hard reset automatically
I wish this info's help's you
ur problem
hi...im using an xda2, not upgraded, on the o2 network here in dublin. If i can help, just ask. How did the upgrade go?...was it worth it?...did u get wmp10?.....im thinking of doing it, but would like some feedback first...
need ur advise....
Hi all...
I am a new imate JAM user... I had 1.03 version rom and I upgraded to 1.06 from imate site.. my imate is working fine..
But as I gone thru this forum... I heard of WM2005 beta version is released... I have downloaded the software with Active sync 4.0 but I am hesitant to try with my new imate JAM.. is it trust worthy and can I upgrade my wM2003 SE to this new one..
Kindly let me know ur suggestions..
Thanks and regards
Iffu
Rom Upgrade
Hi Im new in a XDA world, i upgraded my xda II with a 1.72 a uk version and it works ok but i realize that i have downloaded the wrong rom update because im from the philippines could you help me with the rom upgrade from asia could you give me the site where i can download for me many thanks guys. and 1 more thing, how can i set the mp3 as ring and in message alert tone. i really appreciate with your help could you help me guys asap i cannot use my xda thanks.
hello
im also new in the XDA world, and i just bought my first xda1. would it be possible to upgrade to wm2003se? how do i do that?
any help would be greatly appreciated
many thanks in advance
Win 2003SE for indonesia
hi all..
can anyone help me 'bout this?
i want to upgrade my xdaII to win 2003SE with autoconfig for indonesia provider..
can anyone tell me where i can dwld this OS..? or can send it to my email directly..? ([email protected])
Anyway... thx.

1.40 iMate ROM and XDA2s

Hi all, my new BA arrived finally! I have decided to keep it afterall. I am a total n00b at this stuff, and really struggle to understand the Wiki site. However, I did manage to download XDA tools and backup my ROM.
I then downloaded the PDA2k_WWE_14000_176_11200 ROM from the FTP site. It said it was going to update my Radio and Ext. ROM too. Anyhow, it comes up with the country code error.
I added that line of script into the file but it still has the error. Any ideas? I thought the iMate 1.40 ROM was supposed to work on the XDA2s.
I really want a more stable device. Are there any other ways to do this? I tried using XDA Tools to upload the NK part of the iMate ROM separately, but it said it needed to be an exact size to work.
What is the best ROM? We couldn't even figure out how to cook and Ext. ROM so if anyone could give me a hand it would be much appreciated. The Wiki assumes you know what you're doing but I really have no idea.
Cheers guys - Mike x
You don't need to use XDA Tools it you're using a standard manufacturers ROM, just the No ID program for the device ID shortcut.
I had to add the country code ID in too, but after that it was golden. Not sure what's up with you...
Chris
If you are on O2 UK and want the imate ROM that also has O2 settings for GPRS, MMS etc, have a look here:
http://forum.xda-developers.com/viewtopic.php?t=24000&highlight=
It's a set of instructions that I made using the wiki, as well as info other members had given me, particularly mdaIIIuser to upgrade a UK O2 XDA IIs to the imate 1.40 without having to enter GPRS settings etc manually afterwards, and still keeping the country code to O2 (which means you can use an official O2 upgrade later , without any problems, if they ever get their arses in gear!)
If you need any more help, let me know and I'll do what I can. If you have an ftp site you want me to upload my upgrade files to, PM me with the details and I'll send it you. I'd put in on the ftp here, but i don't think it's worth taking up so much space with a customised ROM.
HTH,
Fin
OK guys, I managed to upgrade my device to the latest iMate ROM, and the 1.13 radio ROM
Problem now is cooking my Ext. ROM. I know I can't update the Ext. ROM that came with the iMate ROM. I want to put my 02 settings in, but I really don't know how. It won't let me put my old 02 image back on the phone, it says the USB is not connected properly
Does anyone have the .nb1 of the 02 Ext. ROM?
Sack that. I downloaded the newest 02 Rom I could find and extracted just the ext. Rom file from the .exe
I am learning
which o2 rom did you use? if it was the uk rom you will have problems as it is 1.31 and your rom is 1.40. you need to unlock the extended rom and copy the base rom 1.40*147 then add your o2 cabs and anything else
hth
fin
Hey thanks Findus, your guide was great.
Yea, I put the 02 1.3 extended ROM on. I didn't know what else to do.
Do you mean the base extended ROM of the iMate 1.40 ROM I put on? I tried that, and there is no Config.txt in the iMate extended ROM.
Sorry, I don't understand this too well
Hey thanks Findus, your guide was great.
Yea, I put the 02 1.3 extended ROM on. I didn't know what else to do.
Do you mean the base extended ROM of the iMate 1.40 ROM I put on? I tried that, and there is no Config.txt in the iMate extended ROM.
Sorry, I don't understand this too well
I did not do anything with upgradetools.rar but the device seems to be working fine. I haven't made a call yet as I'm cut off. Does this mean I don't have to do it?
Chers -Mike
Glad to have helped, although I can't take credit, I got all the info from thw wiki and other posts!
Have just been trying to upload my Extended ROM, it is a modified version of Cooked ERK 1.4x Base that can be found in the wiki under ERK 1.40 . This version of the EXT ROM does have a config.txt, you were probably looking at 1.40.176? All I did was add the 6/7 O2 CABS to the config.txt of the base rom, then changed the caller id cab to 1.20 from the link below:
ftp://xda:[email protected]/BlueAngel/CAB_Files/Caller ID/IA_CallerID_1.20_WWE.CAB
You will probably have some problems with the Ext ROM you have on at the moment, because you haven't got any of the patches for 1.40 which might mean GPRS etc might be unstable.
I will try and upload my Ext ROM again later if you want, all you will need to do is unlock your ext rom, delete the files, and copy over the new files. DO a hard reset and you're away!
Good luck!
Fin
OK, I don't understand.
I just delete all the files (aside from the 02 setup ones) of my current ROM and put these ones in? I don't need to upgrade the Ext. ROM bith the BAUpdate thing?
No, you won't use the BA Upgrade itility- that is for reflashing, which if you had a ms_.nbf file(extended ROM installation file) you would need. There is no tool to edit ms_.nbf files on Blue Angel, instead you have to unlock the Ext ROM manually, copy/delete files, update the config.txt then do a hard reset. Takes some getting used to- I was used to using er2003edit with my Himalaya to make a custom ms_.nbf file, but hey, this method works too!
Good luck,
Fin
Hey man, I already did it! Well good! It's based on the Qtek ROM you reccommended with the o2 stuff added in and the caller ID updated.
now running:
ROM version: iMate 1.40.00 WWE
ROM date: 03/10.05
Radio version: 1.13,00
Protocal version: 1337.42
ExtROM: 1.40.147 based on the Qtek cooked for use on 02 UK
My phone hasn't required a single hard reset all day and is still recieving calls (with sound) and messages
Thanks everyone!
-Mike
Hi
I am about to get an XDAIIs to replace my falling apart PDA2K.
I want to use it on Vodafone.
Is there a real 'idiots' guide to putting the latest and greatest ROM onto the XDAIIs.
(I really do mean idiots guide by the way).
Cheers.
Robin

HOWTO: Upgrade to other ROM without using NoID tool

(I am not responsible for any damage you might do to your device using this guide)
I tried flashing with the NoID tool several times, yet it always failed, or my Universal would not boot after the flash.
The regular T-Mobile update utility did work like a charm, and never failed on my. Thus I created a little tutorial on how to convert wrong ROMs to ROMs it will accept.
In this Example I will explain how to use an O2 XDA Exec ROM (and a different radio ROM) on a T-Mobile MDA Pro device
It's easiest to start with a clean directory to do all this as else it can get quite messy.
First, get the HTC64 Extended ROM Tool by Bal666 here:
http://buzzdev.net/component/option,com_remository/Itemid,100/func,fileinfo/id,196/
Next get an original ROM for your device, in my case I used the T-Mobile UK ROM as my device was english anyway.
For example, on the T-Mobile MDA Pro UK (or dutch) version, use "UNI_TMUK_11242_126_10002_Ship.exe" (find it yoursef)
Use WinRAR (http://www.rarlabs.com/) to unpack this file to a new directory called "Original", and unpack it again to a directory named "Converted".
The Original directory will be used to check things, and the Converted directory will be used to store all the roms that we have converted
Next we must find the ROMs we want to flash. I got "Xda_Exec_LaunchROM_v113139.exe" and Unpacked it in a directory named "O2", and "UNI_radio_1.08.00.rar" (from buzzdev.net) and unpacked it into "Radio Update".
First we must find out some things about our original ROMs. For each original ROM in the "Original" directory, follow the next steps:
- Open the HTC64 Extended ROM Tool
- Click Decode
- Open the ROM (.nbf file)
- Write down the values after "Operator Name" and "Language"
- Hit Cancel
Now we must modify the ROMs from the other distributions.
From the O2 directory we will use nk.nbf (OS) and ms_.nbf (Extended ROM), and from the Radio Update directory we will use radio_.nbf (Updated Radio ROM).
For each ROM you want to convert, follow the following steps:
- Open HTC64 Extended ROM Tool
- hit Decode
- Open the ROM
- In "Operator Name" and "Language" fill in what you wrote down earlier
- Hit Decode
- (on the begin screen) Hit Encode
- Open the .prj file you just created (same name as ROM, but with extensio .prj)
- Hit Encode
- if asked "Overwrite existing ROM", choose "Yes"
- if asked "Fat16 file is too large", choose "OK"
- When done, copy the over-written .nbf file from the directory you created it in (like O2 or Radio ROM) to the Converted directory. Choose to overwrite the existing file.
When all is done, run the ROMUpgradeUT.exe in the Converted directory, and follow the instructions.
If all goes well, you should have upgraded your ROM without having to CID-Unlock or use NoID tools that were originally made for another device
If before the actual upgrade your PC says it has found an unrecognized USB Device, close the RomUpgradeUT.exe with task manager (ctrl+alt+del), and reset your device (push the stylus in the hole at the backside). Then re-run the ROMUpgradeUT.exe
Credits go to iruja because he helped me find these tool
Let me know if it also worked on your device
EDIT: Stupid me, HTC64 Extended ROM Tool is by bal666
EDIT2: Note on "Unrecognized USB Device"
EDIT3: Added credits
Nice Job! Good, Clear and informative instructions.
he, leuke guide, die ken ik ergens van
Nice people like my way, this is the same way I test different roms for the wizard, without having to cid unlock the phone and loose warranty
Thank you "TheBlasphemer"
wow, I searched this forum for a few hours trying to understand how to install roms from other developers onto my Universal. It was driving me insane cause i kept on recieving country id errors. I found your post and was delighted to find how easy it really is to upgrade roms. Thank you for helping people like me who have no clue. Thanks, Thanks and More thanks. I also give shout outs to all others in this forum who take time to help others. XDA Developers is awesome! I'm surprised that developer sites dont link to xda developers for their customers. It would save them alot of time and money. Peace
Great Instructions
Many thanks for the great instructions.
I tried to flash my T-Mobile MDA Pro to the latest i-Mate rom and it became stuck in the Bootloader mode (I used the No-ID tool, and tried every type of reset). Fortunately this approach works, and I'm now the proud over of an much faster PDA.
Rom: 1.30.68 WWE 02/08/06
Radio: 1.09.00
Protocol: 42.42.P8
ExtRom: 1.30.153 WWE
The original T-Mobile Rom sucks compared to these i-Mate Roms
http://forum.xda-developers.com/viewtopic.php?t=42743
Excellent
Crystal clear instructions. worked like a charm once I found the Orange operator code is ORANG007. The "Orange" ROM on ftp appears to be a hash of 3 other versions as the operator names are QTEK001 and CDC__ something or other....
Thanks again for the excellent, no hassle upgrade method!
This procedure will be working on MDA Vario (QTek9100) ?
I have a QTEK 9000 that is in Spanish OS. There is no available downloadable shipping ROM so how do i get the values of Operator Name and Language? Are they in the registry=?
Tried this on my MDA pro NL which is stuck in boot screen, but no dice
I used however the init UK rom from T-mobile, not the NL which was my official one. I don't have a NL so I maybe if I use that one, it'll work, but Im afraid not
Viper, I also have a NL version and would like to upgrade my MDA...did you have any luck doing so or did you find the original dutch ROM?
(A stupid question: when I upgrade my rom, i assume that all my data is lost, right?)
Just wondering did you all upgrade your devices with the exe that came with the new ROM, or the one that comes from the phone vendor? :roll:
Kinda wondering should I use the one that comes with the QTek ROM, or should I use the one that came with the Dopod ROM (mine's a Dopod)
wow, how easy was that
the orange updater from the net (M5000_email.exe M5000) creates a temp directory called
\Local Settings\Temp\pft3CA.tmp\
run the orange updater program so it extracts the files, DONT CLOSE IT, leave it at the point where you make it update (don't hit next)
now follow the steps of the OP
simply decode your chosen rom, encode them with the correct info, then overwrite the roms in the temp directory with your required ones
then let the orange app install 'em for you!
took me 10 min to make my radio only to 1.09
hi guys
my MDA Pro dead, only show boot mode. i can't turn on my phone. i'm using all rom files. but no result. please help me how repar my phone. i'm use then solution no result. i can't change my phone lang. detect phone show only empty info. help me pleaseeeeeeeeeeeeeeeeeeee
siemens man??
why that name, do you work for 'em?
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
Thank you verry much i'm verry happy with the Qtek-ROM (radio of Dopod 900) instead of the T-mobile rom
And now I have MSN
Im going to upgrade my MDA PRO tonight using the instrutions in this thread, but which is the best ROM to update it to? i suppose i would like push mail and msn messenger/hotmail.
also is there a slightly more stable internet browser in the ROMS? my current IE is not very good, and opera has the habbit of coming up with a not enough storage memory in dll error!
XDA EXEC is dead
I received my xda exec two days ago. I've tried the ROM upgrade as described. ROMUpgradeUT went OK. When I cold boot my device I get two options - Press 0 to restore factory default Press X to exit. Neither have any effect and the exec seems to be dead. Can someone help out or suggest a fix please?
It's alive !!!
Managed to get the exec in boatloader mode, plugged in usb and reflashed it with an original O2 rom, which, thankfully revived it. I still would like to find out what went wrong with the original ROM upgrade and why it 'killed' the exec. I followed the instructions to the letter. My orignal pre-installed ROM was a 1.13.82 (11/30/05), Radio 1.04.02, XROM 1.13.188. I tried to upgrade to JASJAR ME 1.30.82 171 10900 WWE ship ROM, which effectively turned my exec into (I quote) 'a very expensive paperweight'. I now have got it working with an older O2 original ROM (ROM 1.13.48 (09/19/05), Radio 1.04.02, XROM 1.13.139). When I tried to flash I overwrote the 'original' (ROM 1.13.48 (09/19/05), Radio 1.04.02, XROM 1.13.139) with the modified ROM, RADIO and XROM files from the JASJAR version, I didn't replace any dll files. Could this be the problem or am I way off target? Can anyone spot were I messed up here. Tonight I will try with another JASJAR upgrade, now that I know I can safely reflash with an oringal O2 ROM.
anyone know where i can get ROMUpgradeUT.exe tool from?

windows mobile 5 on imate pda2k / qtek 9090

how can i do this?i tried to download a lot of files from this website but they didn't work....
can you help me? i'm italian.
can you make me a simple guide to change the rom in my phone?
thanks a lot
yes plz...same problem here
any one
You have to read and understand English. This should be enough to upgrade even to WM6.1. Start using Wiki.
PS: downloading files without understanding what are they for is the best way not to do anything or to destroy your device.
what i mean to say is that i want to upgrade my imate pda2k windows from 4 to 5..
for that the file named Version 5.1.1700 Build 14343 - Patched by Mamaich V3
on this link is not downloadable..
http://wiki.xda-developers.com/index.php?pagename=BA_5.1.1700_build_14343_Upgrade
can someone help me to get this file plz....
thank u

Categories

Resources