Country ID changed - Upgrading, Modifying and Unlocking

The other day I tried to install in my Qtek2020 the Spanish ROM 1,72 of movistar modified with xda2nbftool, but I forgot to connect the shipper. The Qtek remained in "1,02 serial" and not revived with hard reset. I connected the shipper and I tried to execute the update again but, apparently, it did not work, so I put myself to look for information. After awhile saw that the program was being executed and, finally, it was completed. Now I have a Spanish ROM 1,72 but if attempt to execute the ROM of Qtek says country ID error to me and if it attempt with the original one of movistar (without modifying with xda2nbftool) admits it. It has been left my Qtek transformed definitively into TSM500? Could revert the process trying to do the same without the shipper?

Related

country code error 120 : 1-3-1-1-1 just my experiences

today i tried to switch my xda2 from t-mobile's 1.72.170GER final rom back to o2's 1.72.184GER final which has been provided recently. i run into that damn country code error 120 because my xda2 has got a t-mobile device id. please find my steps for solving that problem:
1. unpacked the 1.72.184GER package into a folder and replaced the original HimaupgradeUt.exe by the hacked one (which is supposed to ignore country codes).
-> result: same problem - country code error 120 : 1-3-1-1-1
2. then i deleted the HimaGetDeviceData.exe in the folder containing the rom-files. and i deleted any existing DeviceData.txt in the windows folder of my xda2. time to start again the hacked HimaupgradeUt.exe.
-> result: first screen with no errors. it tells me that my device is going to get an update, from rom 1.72.01, radio 1.17.00, extrom 1.72.170 to rom 1.72.01, radio 1.17.00, extrom 1.72.184. i am happy so far but the next screen is again that damn county code error 120 message :-( meanwhile my device is stuck in bootloader 1.06 mode.
3. at this time i deleted the HimaClearJumpCode.exe (which is no longer needed for setting the xda2 in bootloader mode, it is already there) and started again the hacked HimaUpgradeUt.exe (the third time).
-> result: first screen with no errors. it tells me that my device is going to get an update, from rom "blank", radio "blank", extrom "blank" to rom 1.72.01, radio 1.17.00, extrom 1.72.184. next screen tells me that the devices rom is getting erased now and the progress bar shows the current status. everything went through the update process fine.
and my device has been successfully transformed from a t-mobile mda2 which looks like an xda2 to a real o2 xda2 with current xda2-software
summary: i guess you can shorten the whole procedure by setting the xda2 into bootloader mode connecting to your pc by usb unpack only the three rom file images into a folder, copy the hacked HimaUpgradeUt.exe into that folder and start it. but i have no time and motivation for doing that since my device works now.
best regards
peter
where to download hacked HimaUpgradeUt.exe
Dear
where to download hacked HimaUpgradeUt.exe
beast regards
:lol: :lol: :lol:
Thank you very much
Thank you very much its work now
beast regards
o2 ruu
i have tryed upgrading my i-mate to the o2 finaleng ruu with the help of dcs i got it to work with the acked file but now i have megga probs, no camera no extrom and no caller id file so i can't open pictures or video as they are looking for 'albam' to view them, can you suggest a way to get them back???
i have tried the upgrade a fair few times and am getting to the end of a short fuze..... if i run the upgrade direct from o2 i get a model id error, in the device data file i noticed that it has::
usb30 cdl uk5
cdl 1.70.00wwe ph10
or something like that..... it's the uk5 bit that is new..
any ideas :?:

Country code id error???????????

Ive downloaded a Qtek 9090 update from Qtek.no but it says country id error or something like that what do i do, to upgrade it anyway?
Hiya
Can try this if you want - beware though - it will wipe your machine totally
http://forum.xda-developers.com/viewtopic.php?t=18754&highlight=

error 120 (incorrect country ID)

I have a spanish vodafone v1640 and i want to change the ROM by using UNI_QTEK_13077_176_10900_WWE_Ship.exe
I have followed the steps from here http://forum.xda-developers.com/viewtopic.php?t=45874 but all I achieve is that error (120 incorrect country ID).
The Rom is in english but the phone is spanish, should that be a problem? I already made a backup.
i have also same problem
Rom is english
Update is Dutch (UNI_DT_WWE_13077_176_10900_Ship.exe)
what can i do ?
Follow this: http://forum.xda-developers.com/viewtopic.php?t=54071
hi quintus.. hmm maybe you can try to upgrade again when u get the error country id, sometimes you need to run 2 times of the upgrade so that i will be successful. just try out c if this works..
cheerss
Not sure if this applies but when doing the radio ROM upgrade I also got the country ID error. I just ran it immediately again without doing anything else. Worked fine. :lol:
Country ID Error Fixed
Hi guys this is my first post!!!
Country ID error....
i fixed my Vodafone V1640 today after a long and hard work
first download WM6.1 or 6.5 then get the original ROM for your
PPC in my was vf-uk_v1640_aku2_v130194_wwe_ship. extract
both to two separate folders (WIN RAR) copy the full content of
the subfolder “OutputFile” and paste in the WM6 folder, it will ask
if you will want to replace “nk.nbf” click yes. go to boot loader mode
and install…..
congratulations!!!

MaUpgradeUt_noID.exe error

Apologies in advance for the newbie question.
I have a new SPV-M5000 locked to Orange. I think I have all of the files that I need to unlock it, and using all three hands I managed to get it into bootloader mode, but when I try to run MaUpgradeUt_noID.exe I get the following error: "MaUpgradeUt_noID.exe is not a valid Win32 application"
I hope that I am making some kind of really dumb (and therefore easily fixable) newbie mistake here. Any thoughts?
Thanks in advance.
Upgrade utility
Hi.
I have the same issue and posted the following on Buzz's site (buzzdev.net) over a week ago but have had no replies. Hopefully someone with an answer will reply to you here?
Quote:
Having read pretty much all the forums on Universal software optimisation starting with craigiecraigie4's excellent guide at http://forum.xda-developers.com/viewtopic.php?t=31697&postdays=0&postorder=asc&start=0 and extensive reading on the wiki site and of course Buzz's brilliant work throughout this and other sites, I finally feel ready to take the plunge with updating my new o2 xdaExec using o2's 1.30.107 WWE ROM, Dopod's 1.11.00 Radio and my own Extended ROM creation (yet to be made as I want to do 1 bit at a time). I thought I'd put Jasjar's extended ROM (164 I think) on until I have got use to modifying the Ext ROM image as I want.
However, I need to use Buzz'y MaUpgradeUt_noID.exe program as the standard installer is telling me there is a country error. Fine, so I have that downloaded BUT when I try to run it, my Windows XP system tells me that it is not a valid win32 application. Am I missing something here? Have I downloaded the wrong program or is there a problem with my XP? I don't appear to have this problem with other programs.
Hope I have included enough info for someone to tell me where I am going wrong.
HELP................
Unquote.
I have just downloaded a version from this forum (about half way down) - I haven't had a chance to test it yet but it IS different and if I run it without connecting my Universal, it does run the program but fails as no PPC device connected so it may be the better version. I will try it tomorrow but if you test it first, let me know
http://forum.xda-developers.com/viewtopic.php?t=54210&postdays=0&postorder=asc&start=25
O.K., that file seemed to do it.
I have now flashed my ROM with the latest non-Greek QTEK build, UNI_QTEK_13077_176_10900_WWE_Ship.exe, and then copied UNI_Unlock_v1.exe onto a SD card and ran it. I got a successful unlock message.
However, when I put my SIM into the phone, it booted up to a plain screen with a title bar of "Simlock" and the following message: "Network is locked, Please input unlock code".
Did I miss a step somewhere? Is it possible that the SIM itself could be locked (it's a brand new Cingular SIM) somehow?
Yes you did miss a step, in fact you missed lots of steps.
Go back and read the readme.txt file that came with the unlock program, everything is explained very clearly in there what you need to do!

Qtek 9090 wont upgrade

Hi i am new on this forum ,i have a qtek 9090 unlocked bought on ebay
it runs windows 2003 and when i try to upgrade to wm6 ,the process starts and and it goes into USB V2.08 and pc makes a usb has been removed sound and the installer gives me a error msg
ERROR 120:COUNTRY ID: ERROR
and when i do a soft reset it comes up with a new installtion of (wm2003 which i hate)
this is getting to my head as i need to upgrade my PDA
can anyone help me
send me some links with the correct software and stuff please
you need to put the device in bootloader mode before connecting it to the pc by pressing reset+power+record and use the MAupgradeut_noID instead of the BAupgradeut to upgrade your device. if you don't have the MAupgrade tool present, you can download it from this post of mine:
http://forum.xda-developers.com/showpost.php?p=3768875&postcount=3
by doing these 2 points, you can avoid all error 101, 110 and 120
windows 6 for qtek 9090
does anyone have links to the new wm6 for qtek 9090
try this: http://forum.xda-developers.com/showthread.php?t=482997
No service
upgrade done and the phone worked for about 3 days now is says no service and wont pick a network
first make sure you didn't soft-reset the device the wrong way, meaning restarting the device by releasing the battery lock, because restarting it like that generally starts the device w/o radio, meaning no phone function. to avoid that, simply soft reset again by pressing the actual hardware reset pin.
in second thought, you might wanna post the values shown in the boot screen, maybe another radio rom might do the trick.
if neither of that worked, maybe you should try another sim card or a different location for testing network coverage just to figure out, if it might have something to do with a network failure.
if still however nothing worked, which i wouldn't hope, it still could be a bug with the particular rom and you might try another rom.
and at last, if that didn't help, you might have a broken radio receiver and as a harware fault would require you to repair or replace the device, but that is rather unlikely, so you are probably lucky and can fix it yourself.
please post back if and when you figured out, what the problem was, so we can all profit and learn off it.
with best regards,
Chef_Tony

Categories

Resources