TOMTOM activation codes - Upgrading, Modifying and Unlocking

Can anyone help with changing the xda device code or any idea for running tomtom without activation code please

Your not asking for information to pirate the software are you - I do hope not. :wink:

no..not at all, I have the software, just had many probs with phones and changed it 4 times in as mny months its just a prob to keep getting codes from tomtom and now i have two devices (one for back up)so can u please help?

I understand the problem Tom Tom getting a bit suspicious you claiming that your PPC has repeatedly failed. I assume that you have TTN2 (as you have probs for many months), I am aware that there out there on some of the peer 2 peer networks (e.g. Kazza etc) there is an exe file floating about for TTN2 which does not require activation. Alternatively keep trying Tom Tom and remind them that the PPC is based on Microsoft software and what can we expect :wink:
Before you ask I don't have the dodgy exe.

Thanks simon for your advice

I lost my activation code. was on my old phone

Related

Upgrade questions for XDA2s. (Help Needed).

Hi,
Now my xda2s is unlocked, and I can use the device properly, I'd like to get rid of the 02 "add-ons" and understand the optimum firmware to upgrade the device, especially to prevent soft and hard resets and increase perfomance.
Can somebody also advise on the link for the Bluetooth patch, my Jabra has more static than a large wooly jumper!!!!!
Finally, has anybody devised a way to run 2 seperate email and address accounts - I'd like to keep my work email and my personla email (and contacts seperate
Thanks for your help.
We'll help you if you tell us how to unlock the XDA IIs
There is no programme to unlock the XDA2s, not that I know of.
I called customer services and made several requests for the unlatch code because i use dual sim cards and connect to another network.
I have called them at least 20 times, and had almost every reason under the sun for not providng the code. 02 are not obliged to give you the code, but if you are persistnet, you can get it.

Black rom 2.5 results in new device ID (for software activations)

Any one figured this out yet?
Basically the tomtom calculates the device code (I thought this was via imei)
Well since installing black 2 I can not longer use tomtom plus services (speed cams traffic e.t.c)
I can change the device code on there website once every 6 months BUT if the same thing happens with black 3 then It wont work, there is a similar thread I have replied to on the upgrades forum which may be a clue as they had the problem with CID unlocking, my device has had all that dont about 6 months ago many roms and "device names" later (one actual device) it now has it thinking its a new device.
I am guessing this is going to happen with a few other bits of software from what I have read in the searches (opera and a few other similar bits of software).
Why would this happen with these latest wm6 roms not previous wm6 roms.
My main worry is if this happens randomly with every new rom, and Im guessing this may not be isolated to this batch of roms.
Similar thread which may give a clue but thought this was more suited to the wm6 forum after I posted :/ lol
http://forum.xda-developers.com/showthread.php?t=284147
Thanks in advance
Start > Settings > System > About > Device ID
CUSTEL;1247299 said:
Start > Settings > System > About > Device ID
Click to expand...
Click to collapse
I'm pretty sure that isn't what he is referring to.
It's a unique string that identifies your device.
For example;
With AEButtons and WM5, I had a Device ID that started with D1 C3.... and then moving to WM6 it changed to something like C6 A2...
I was able to activate AEB just fine, it just shows that I have activated 2 devices at AEB's website activation page.
Karzi said:
Any one figured this out yet?
Basically the tomtom calculates the device code (I thought this was via imei)
Well since installing black 2 I can not longer use tomtom plus services (speed cams traffic e.t.c)
I can change the device code on there website once every 6 months BUT if the same thing happens with black 3 then It wont work, there is a similar thread I have replied to on the upgrades forum which may be a clue as they had the problem with CID unlocking, my device has had all that dont about 6 months ago many roms and "device names" later (one actual device) it now has it thinking its a new device.
I am guessing this is going to happen with a few other bits of software from what I have read in the searches (opera and a few other similar bits of software).
Why would this happen with these latest wm6 roms not previous wm6 roms.
My main worry is if this happens randomly with every new rom, and Im guessing this may not be isolated to this batch of roms.
Similar thread which may give a clue but thought this was more suited to the wm6 forum after I posted :/ lol
http://forum.xda-developers.com/showthread.php?t=284147
Thanks in advance
Click to expand...
Click to collapse
I opened a call at Tomtom for that. I have the same problem. I asked to have a solution of a code based on the hardware and not on the operating system.
The answer: impossible. I must indicate the link of new the ROM and they correct the code.… I did not test yet…
I've run into the same situation with TomTom. It's a bit of a pain. Still working through the issues with them.
Timothy
I think the API to get the device's IMEI got broken in the latest WM6 builds. I too have the TomTom license problem, and Opera Browser for Mobile is also complaining that the device ID has changed. Prior to upgrading WM6 (LVSW 20070423), Opera Browser would read the IMEI (device ID) correctly. After upgrading, it now reads a completely different number (not even remotely close, for one thing, it is two digits shorter). However, when I look at the IMEI shown in "Device Information", or #*06# from the phone dialpad, it is correct.
In both my cases (TomTom and Opera), I was quickly able to get new license keys from each, but it is still a pain.
WTF, M$ & HTC???
John
Same happened to me with the Hebrew add on. Strange.
Had the same wit Hebrew as well...
Yup, same problem here, I'm with Berdinkerdickle, there is a hex code that you can see with AEB Plus's registration screen that comes from the OS I guess. It changed from stock WM5 to Black 2.0 and now again with 2.5
Slingbox Mobile seems to use it internally to lock it to an individual device. The prog actually logs onto the sling site each time you use it and checks this number against the issued key code, this is independant of user inputted ID name like most progs. If there is a mismatch the program tells you that you have 30 days remaining and counts down till you enter a new code provided by Sling, which means an email conversation with them each time to get a new code.
AEB Plus as noted, shows you the internal code string and has you enter that string into their website to get an activation code. (I'm on my 3rd web re-activation and wondering if AEB has a max cut off number?)
I looked over the thread referenced on the first post and it mentions super CID, I've not done that to mine yet.
The device code is a hex string listed as 7 pairs of numbers in AEB Plus (xx xx xx xx xx xx xx) is this the CID code?? and if it is, is it linked to the OS, uniquely by device?? That doesn't make sense to me.
Same problem for me, with SlingPlayer and a few other applications. Ugh. Every time I put a new ROM on there, the device ID or whatever they're using changes. They must think I'm trying to equip an army with Slingplayer licenses.
jmat said:
Same problem for me, with SlingPlayer and a few other applications. Ugh. Every time I put a new ROM on there, the device ID or whatever they're using changes. They must think I'm trying to equip an army with Slingplayer licenses.
Click to expand...
Click to collapse
I had it with a few apps as well. With Slingbox they indicated that it's not a problem at all since once they issue a new code, the old one is invalidated. They don't really care.
never mind...
johnburn said:
I think the API to get the device's IMEI got broken in the latest WM6 builds. I too have the TomTom license problem, and Opera Browser for Mobile is also complaining that the device ID has changed. Prior to upgrading WM6 (LVSW 20070423), Opera Browser would read the IMEI (device ID) correctly. After upgrading, it now reads a completely different number (not even remotely close, for one thing, it is two digits shorter). However, when I look at the IMEI shown in "Device Information", or #*06# from the phone dialpad, it is correct.
In both my cases (TomTom and Opera), I was quickly able to get new license keys from each, but it is still a pain.
WTF, M$ & HTC???
John
Click to expand...
Click to collapse
The API isnt broken... works fine in Black 2.0, 2.5 and 3.0, as well as all of LSVW ROMS...
Skyscape
Same problem with
Skyscape applications (medical references)
http://www.skyscape.com
johnburn said:
I think the API to get the device's IMEI got broken in the latest WM6 builds. I too have the TomTom license problem, and Opera Browser for Mobile is also complaining that the device ID has changed.
Click to expand...
Click to collapse
The irony is that people who didn't pay for these applications have zero problems..
Copy protection doesn't hurt anyone but the legitimate people..
The worst part is, I can't even suggest that you (the legitimate purchaser) use the keygen floating around give yourself access to your product.. because that would cut you off from your online services..
icemantwilight said:
The irony is that people who didn't pay for these applications have zero problems..
Copy protection doesn't hurt anyone but the legitimate people..
Couldn't agree more!!
Click to expand...
Click to collapse
mrvanx;1248020 said:
never mind...
Click to expand...
Click to collapse
Sure, No Problem.
Yea, I wish we could delete our posts rather than
only being able to edit them.
Karzi said:
Any one figured this out yet?
Basically the tomtom calculates the device code (I thought this was via imei)
Well since installing black 2 I can not longer use tomtom plus services (speed cams traffic e.t.c)
I can change the device code on there website once every 6 months BUT if the same thing happens with black 3 then It wont work, there is a similar thread I have replied to on the upgrades forum which may be a clue as they had the problem with CID unlocking, my device has had all that dont about 6 months ago many roms and "device names" later (one actual device) it now has it thinking its a new device.
I am guessing this is going to happen with a few other bits of software from what I have read in the searches (opera and a few other similar bits of software).
Click to expand...
Click to collapse
Same problem with my TomTom, does the new Black 3.0.1 solve this issue?
Black 3.0.1 goes back to the same hardware ID that was around in Black 1.0 and Black 2.0. So.. I guess it's fixed? It seems like there was a build of WM6 out there that really screwed with things -- because all of the other ROM's had the same problem.
jmat said:
Black 3.0.1 goes back to the same hardware ID that was around in Black 1.0 and Black 2.0. So.. I guess it's fixed? It seems like there was a build of WM6 out there that really screwed with things -- because all of the other ROM's had the same problem.
Click to expand...
Click to collapse
I didn't check Black 1 or Black 2, was the ID the same as WM5 with these versions of WM6? It was only a fault in roms v2.5?

Need Some Help!!!

Greatings From Beautiful Greece ,
Before One Week I bought my first PPC , a HTC TYTN
I Would like to know how to unlock the gps. Is it possible?
I Can only connect to the Destinator with the bluetooth adaptor and connect to the satelite.
Anyone Know how to crack this? Is it possible?
Is there any new update i can install in order to manage better my ppc.
I Heard WM6. How Can I setup a new Operating System? Will It work or will my PPC Crash and after i will need Service.
Thank u all.
Odysseas.
TYTN does not have a GPS. There is nothing to unlock. (Well there suppose to be a chip but no antenna so its useless).
DO NOT MESS WITH YOUR OS!!!
A) Changing the OS without an official update from your cell company or the manufacturer of the device will void all warranty and you will have to pay for service if anything goes wrong.
B) Changing the OS on TYTN is very complicated and should not be tried unless you searched read several times uderstood and memorized all the steps.
Just enjoy your phone as it is for now because if you try to change ROM too soon you could end up with a very expensive paperweight! (Many people have)
Topic Closed Thank u!!!
topic closed
---------------------------------------------------------
thank u all

Has your TomTom Device ID changed?

guys,
when I moved from WM5 to WM6 (both official ROMs), my device ID appeared to change (assumption by virtue of the fact it changed in TomTom 6).
Can anyone else confirm they have seen this? I'm still waiting for HTC UK support to contact me. ABout a week now.
I thought it might be helpful to see who has seen this (regardless of ROM details).
Hi,
Yes, all time you Flash your PPC with new Rom, Your Device ID change, and Tomtom need to be change too (Trafic, SN, etc...)
If you have Tomtom Trafic option, go to tomtom site to change your device id, it's work fine.
As far as I know, it is only the DOPOD, and DOPOD based ROMs that have this problem, and it is a bug in the firmware. The very latest DOPOD release has apparently fixed it- so Mun's Indigo Full which uses the latest ROM is OK, but Lite shows the problem.
Device ID's are a complex matter. Some are based on the IMEI, some derived from the ROM version and some by other means. TomTom and Mobipocket both use 'other means' to derive the Device Code, and it is only with the 'faulty' ROMs that the Device Code changes.
I've taken my Trinity through about 7 ROM updates, and the TomTom Device Code remained the same except in the DOPOD WM6 ROMs; reverting to another ROM resulted in the Device Code going back to what it should be.
This is a real problem for TomTom users because they are currently refusing to relink the new Device Code to the Traffic and Weather account, even if you succeed in obtaining a new activation code. So you have a situation where the software is working fine, but you can't access your TomTom Home subscriptions. Customer Support are now asking for 'proof of purchase' of the WM6 ROM upgrade, which of course can't be provided as there is no 'proof of purchase' for most ROMs.
We have had quite a long topic on this on 4Winmobile, and the latest situation is that it could be a case for Trading Standards to investigate, as TomTom are effectively blocking users from accessing services they have paid for.
hi Neil,
that's most interesting feedback, thanks.
I too have installed at least 6 ROMs on my Trinity. From the OEM Orange UK WM5 (the phone came with) through to mUns TE and others the device code remained static.
Then when I went to the officical Dopod WM6 ROM it changed. I believe I also used the latest official of their ROMS the other week, which was rumoured to fix this issue, but it has not. I think people are confusing the other issue of changing with each hard reset- which I do not have the problem of.
I'm very frustrated with TomTom- it's a month now with no Traffic- and I use it for my work driving the length of the country.
I've suggested that it shouldn't be my problem- after all I have paid the subscription, and it's an official ROM. OK it costs them time to make a change- but it costs them more to keep sending emails to-and-fro asking me for proof etc etc. I've wasted hours on this chasing, HTC (Dopod), Microsoft and TomTom, plus investigating on the web. It's clearly an issue, but no-one will hold their hands up.
If someone could post a link to the latest Dopod ROM which definitively does not change the ID I'd be eternally grateful. And by definitive, I'd prefer first hand experience ;-)
folks,
tonight I bit the bullet and installed mUn's Indigo Full. Very quick to install, nice looking ROM but the Device ID has still changed :-(
So every Dopod official ROM and now the full Indigo changes the device ID from the original WM5 ROM and every other WM6 ROM.
I've tried 3 ROM in 7 days now. This is getting silly!
I think I will not be renewing my TomTom Traffic. Oh and I forgot to say, HTC Europe sent me a fob- off email tonight.
"Contact your phone supplier......" Thanks. They seem to be deliberately avoiding this- I gave them the chance to just say "yes" we know there is an issue. That would be enough for TomTom.....
TomTom and license key
I have heard that TomTom only allows the use of the license key twice. Has anyone found this to be true? Because, if so, a lot of people who have installed WM6 on their Trinity and have been asked to activate Navigator again (myself included) will have to think twice before switching ROMs again.
Hmm I'm not sure if this is correct- if the map is activated, and you change the device ROM, TomTom does not need the map to be reactivated normally.
This ONLY happens if you change the device ID- i.e. you then need to reactivate with the licence.
If Device ID's change again then yes there is a problem.
Please lets not confuse the issue here- the problem is for Traffic subscriptions- you can only change your device in the TomTom account online once in 6 months.
After this you must go through TomTom support.
It's not got customer service to be waiting 1 month with no resolution.
sickboy555 said:
Hmm I'm not sure if this is correct- if the map is activated, and you change the device ROM, TomTom does not need the map to be reactivated normally.
This ONLY happens if you change the device ID- i.e. you then need to reactivate with the licence.
If Device ID's change again then yes there is a problem.
Please lets not confuse the issue here- the problem is for Traffic subscriptions- you can only change your device in the TomTom account online once in 6 months.
After this you must go through TomTom support.
It's not got customer service to be waiting 1 month with no resolution.
Click to expand...
Click to collapse
I also had the "famous" devide-id change after upgrading to the official WM6. But in my case something very strange: I DID send a proove of repair to TomTom (I really had a repair) and then TomTom DID reset my device-id to the correct device-id (when I actually look at the TomTom-site my settings are all correct).
But now I still get an error using traffic (and other Plus-services). I resettet my device on the TomTom site many times but no effect.
The situation now is that I have alle the correct codes, can use TomTom (6) but still can't use traffic!
When I go back to an unofficial ROM (p.e. Sleuth 3.2) with another device-id everything's ok.
Frustrating... don't know what to do anymore, TomTom did their job.
oh no Pietrucci, that's bad news. And very odd if they changed the ID, but going back to another ROM with old ID, Traffic works.
So if TomTom update my device ID and Traffic still doesn't work I'm scuppered.
Apparently they never let you go back to an old ID in your account, which means going back to an old ROM may not help either. Maybe there is something wrong with their account system for Traffic, if your old one still works???
pietrucci said:
I also had the "famous" devide-id change after upgrading to the official WM6. But in my case something very strange: I DID send a proove of repair to TomTom (I really had a repair) and then TomTom DID reset my device-id to the correct device-id (when I actually look at the TomTom-site my settings are all correct).
But now I still get an error using traffic (and other Plus-services). I resettet my device on the TomTom site many times but no effect.
The situation now is that I have alle the correct codes, can use TomTom (6) but still can't use traffic!
When I go back to an unofficial ROM (p.e. Sleuth 3.2) with another device-id everything's ok.
Frustrating... don't know what to do anymore, TomTom did their job.
Click to expand...
Click to collapse
I have exactly the same problem. Online my plus services shows that the TomTom Device ID is correct, BUT traffic still doesn't work.
Going back to the older version of WM6 with the older device code and it works. So TT Plus servers must still have the old device code associated with my PLUS account even though PLUS online is showing the new code.
I've told TT that it's not working but no fix so far.
MAJOR UPDATE: New build of WM6 fixes the device ID change issue. The device ID is the same as in WM5 - the first cooked ROM to include the fixed build is Schap's 3.60a.
Best get onto TT and have that code reverted back sharpish!
hi eaglerest can you post a link to the specific new build of WM6 you are referring to please (the OEM ROm, not the cooked one).
The 8th of August DOPOD rom DOES NOT fix the device ID bug.
i.e. this one RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship
hi,
sorry it's a hermes build.....
http://forum.xda-developers.com/showthread.php?t=322905
ah, so it's not just confined to the Trinity then.
thanks for the info eaglerest.
right, I've given up with this ridiculous Device ID business!
I told TomTom to leave the ID alone (after 6 weeks with no Traffic) and have gone back to mUn's TE, which preserves the old Device ID.
Not what I really wanted but I think I'll be an old man before it gets resolved.
HTC In Asia and Europe fobbed me off and wouldn't even acknowledge this as an "event" let alone a bug.
Hi all, am I missing something? I thought that the latest release of code i.e. OS 5.2.1620 Build 18125.0.4.2 was going to fix this? Or have I mis-read the posts. I ask because I tried the latest Bepe build, and my device ID still changed. Does anybody know excatly why the ID is changing?
moondevil said:
Hi all, am I missing something? I thought that the latest release of code i.e. OS 5.2.1620 Build 18125.0.4.2 was going to fix this? Or have I mis-read the posts. I ask because I tried the latest Bepe build, and my device ID still changed. Does anybody know excatly why the ID is changing?
Click to expand...
Click to collapse
Not really sure what you think you have misread. perhaps you are thinking of a bug whereby the Device ID apparently changed on EACH hard reset? I personally have not seen this.
My problem is that WM5 = DEVICE ID A (My Traffic is registered to this.
mUns TE WM6= DEVICE ID A
Official DOPOD WM6 ROm, Indigo FULL = DEVICE ID B. Now my Traffic will not work.
TomTom will only change the registered device if I can provide proof from HTC or someone else that this is a bug. Guess what- they've been no help at all. Neither have Microsoft or Orange.
sickboy555 said:
Not really sure what you think you have misread. perhaps you are thinking of a bug whereby the Device ID apparently changed on EACH hard reset? I personally have not seen this.
My problem is that WM5 = DEVICE ID A (My Traffic is registered to this.
mUns TE WM6= DEVICE ID A
Official DOPOD WM6 ROm, Indigo FULL = DEVICE ID B. Now my Traffic will not work.
Click to expand...
Click to collapse
OK, just so I'm clear on this because I'm (nervously) about to go down the path of updating for the first time. I'm coming from WM5, having never flashed before, will upgrading with Bepe's latest of .74 change my Device ID or not?
probably, but I have no idea for sure. Not used that ROM.
If you use TomTom Traffic and it does change, you will not be able to use it anymore. If you have never changed your device ID with TomTom, you can do it yourself- but only once per 6 months via your account on their website.
You will have to re-register all your maps too.
If you saw moondevils post, his ID changed with one of bepe's builds. I imagine that bepe uses the same core OS for all his builds so your ID will likely change.
mUns TE is the only Wm6 ROM I have tried which keeps the ID (and I've tried many many).
sickboy555, thanks for your reply.
I *thought* I'd seen something relating to the newer build not changing the ID, but I was obviously mistaken. Like you, I've tried most of the "post Dopod official" Roms and they all change my device ID. I followed the link to the Hermes build and saw that it was a 18125.0.4.2 build, and thought that maybe this would cure it. But obviously not.
What I find funny is that Bepe is building Tomtom in to his builds, and I'd love to use it, except I just upgraded from my SPV M5000 (1 change) and now tomtom won't let me reregister my maps.
Bugger!

Blackberry Connect

Will Blackberry Connect work on the Touch Pro2?
I have installed version 106 and no luck as yet with t-mobile., stiil pending.
I just put the blackberry service on the phone and they said give it another day to activate the service.
Any help/suggestions would be appreciated.
i have been stuck on this issue for a week... no luck...
wrote to htc and they came back saying that look for updates on its site... now that's a really long shot..
would suggest that you too write to them... lets put some pressure..
this is a business phone according to them... then bberry is as much important!
I havent bought this phone yet, but I would only be able to if bbconnect is working.
Could you try to change the device ID to TouchPRO in settings/system/about and change the registry HLM\System\Versions\Aku to .1.6.0
But you need to change it BEFORE you install BBConnect
Please indicate if this makes any difference, otherwise we'll need to wait for a new bbconnect version
When i had installed the software without the above settings, i had a PIN and IP address - but it would not connect.
Later on i had hard reset the phone...
now i re-installed the software with the settings u mentioned, but i do not have a PIN or IP Address and bbconnect will not register either...
could u please tell me how to un-install it safely too? as i do not want to do another hard-reset now!
(btw, i had done a hard reset on the phone earlier coz after i tried 106 and uninstalled it, i installed a previous version 100 and it hung my phone.... )
peebee01 said:
I havent bought this phone yet, but I would only be able to if bbconnect is working.
Could you try to change the device ID to TouchPRO in settings/system/about and change the registry HLM\System\Versions\Aku to .1.6.0
But you need to change it BEFORE you install BBConnect
Please indicate if this makes any difference, otherwise we'll need to wait for a new bbconnect version
Click to expand...
Click to collapse
Thanks..I just unstalled and tried your settings still no connection or PIN.
am sure htc engineers visit these pages too....
hope u guys understand.. that u r touting the tp2 as a business phone.. and we need blackberry too in a business phone to complete the package....
we cannot connect to exchange alone (that incurs data charges and is not roaming friendly - especially international).. we need bberry coz that keeps us mobile from country to country that we visit...
common guys... its just a few lines of code u hv to modify... am sure...
Hi,
Have you tried this?
See WM65 solution here:
http://forum.xda-developers.com/showthread.php?t=502623
I think you have to play with the version number of your WM...
In case of WM61
I used this:
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
Br,
Zsocee
I'm an Aussie wanting to purchase a Rhodium...
I'm upgrading from a 7100G blackberry handset. (yup a massive upgrade). Although the most critical part of my phone... (apart from making phone calls) is my blackberry push e-mail...
I can't afford to change over phones until I know that the Blackberry Connect 4.0 works. I know that HTC have a special version of the Blackberry Connect for the Diamond, the Touch Pro ect...
http://www.htc.com/sea/SupportViewNews.aspx?dl_id=497&news_id=61
With Windows 6.5 rumoured to be released within the next month I'm speculating that we won't see Blackberry Connect 4.0 working on the windows mobile 6.1
Zsocee said:
Hi,
Have you tried this?
See WM65 solution here:
http://forum.xda-developers.com/showthread.php?t=502623
I think you have to play with the version number of your WM...
In case of WM61
I used this:
HKLM\System\Versions\AKU key, change whatever in there (like .0.0.3) to .0.4.2
Br,
Zsocee
Click to expand...
Click to collapse
nope... non of these solutions will work.. tried all of them... even faced a few hard-resets trying older versions of bbconnect.
we have to wait for the next release. hmm....
mirage22 said:
nope... non of these solutions will work.. tried all of them... even faced a few hard-resets trying older versions of bbconnect.
we have to wait for the next release. hmm....
Click to expand...
Click to collapse
Me too!! Not working.
Had T-mobile and Rim on the phone together with no luck.
Well I contacted HTC to find out when it would work and this was the reply I received:
Since Windows Mobile is our platform for the HTC handsets, we would push customers to use the Microsoft exchange server.
The device comes with microsoft exchange server support and also supports IMAP and POP3 accounts.
HTC is not going to release any Blackberry connect applications and it would not up to HTC to do this. If Blackberry wants to develop an application and release it to HTC, you may need to check with RIM/BB.
RIM (is the company name)
Blackberry is the platform
Hope this information helps.
Sounds like the person I was contacted by either has no idea or there's no plan for blackberry connect to work on the touch pro 2.... Oh well looks like I'll have to purchase a storm...
Just be patient...
I'm more than sure that we will get BBC to work the same way we did it before. By manipulating the Device-ID string in the ROM (from HTC-Rhodium to whatever) BBC should recognize the device as "allowed" and it _should_ work. So all we have to do is to wait for the HardSPL-guys getting it done so that we can flash custom ROMs. Once this is done, I assume we will have BBC up and running.
Blackberry Connect.
Blackberry Connect does not work on the device, however, it seems to work on the HD.
From Sems.org
Has anyone tried this?
from http://www.sems.org/entry.asp?entry_id=338#IDComment31926819
Paul
Report Reply 1 reply · active 2 weeks ago
0 Vote up Vote down AirwolfUK · 2 weeks ago
make sure your AKU is set to .1.6.3. I have bbc .106 working fine on my touch pro2 with this and the SetModelID solution
Report Reply
I am planning on upgrading from Fuze to Fortress (TP2) and want to see if this works. You need to make sure your account is provisioned for BBConnect service.
Didn't work for me even after switching system ID to identify as Raphael, on T-Mobile US.
It works fine on the Rhodium. Check out the thread entitled "blackberry connect, not yet working" It got working about halway through. I use BBC on mine but I needed to make a couple of tweaks as outlined in that thread.
Dominoid - Rhodium - Blackberry connect
very interested in your asnwer dominoid.....can you send us more specifics as to how / what / where. We are dying to get Rhodium work with BBErry Connect. Which version worked with yours?
Does anyone know the orignal AKU for the ATT Tilt2?
I hate cross posting in threads, but somehow people decided to open different threads on the same topic. (Maybe a mod can merge them into one if he reads this).
Read more for a final solution without using SetModelID and starting and stoping services each time:
http://forum.xda-developers.com/showpost.php?p=4782317&postcount=163
Direct Link to the HowTo: http://www.silentservices.de/HexEdit-ROM-for-BBC.html
BBC
Works excellanty on my TP2 on Vodafone India Delhi n/w
follow steps on this forum
http://forum.xda-developers.com/showthread.php?p=5123157#post5123157:o

Categories

Resources