Step by step guide on ROM upgrade? - Upgrading, Modifying and Unlocking

Can somebody give me a step by step guide on upgrading ROM of my T-Mobile XDA1. There's too much information here and I can't get to a step by step guide. Kinda worried coz I just got hold of my XDA 1 (T-Mobile edition), I'm a palm user before.
This is my Device's Information
ROM version: 3.14.40ENG
ROM date: 11/26/02
Radio version: 6.18
Protocol version: 324e4
Pocket PC Version 3.0.12039 (Build 11178) (Don't know if this is 2002 or 2003 pocketpc)
I want to unlock the device that's why I'm upgrading. I will be using the yorch.net ROM (http://kitchen.romanweb.com/kitchen/index.php) in EXE file. How will I upgrade?
I already downloaded the ROM from yorch.net selecting
3.17.03 ENG O2-Euro (6656 kB available)
and
XDA-developers AutoConfig data (113 kB)
How do I upgrade my ROM? Somebody said that I have to sync my device (usb cradle with power connected) and after synching run the exe file on my desktop computer. Is this method fail proof? Will it not damage my device if ever there was an interruption or something? How can I make sure that I can go fail-proof? I don't have an SD card so I downloaded the EXE file rom update from yorch.
Should I remove the simcard while I update the ROM? What other things should I remove from my device? Can you give me pointers? Id really appreciate it.
Thanks

Also, I've downloaded the exe file from yorch.net (http://kitchen.romanweb.com/kitchen/index.php) and its size is only 150KB? I thought rom upgrade file are like 15MB? I'm really confused.
I just want to get it unlocked. I'll be using it in the Phils(GSM900/1800) and US (from time to time)

it's still 150 kb. Here's what it says when I view the log
./mkrom.sh: ../../kitchen.local/mkrom-inc.sh: No such file or directoryno files for configid 26220739Cannot fit files in given sectionsError splitting files

If you want to get A.30.09 ENG
:arrow: :arrow: :arrow: :arrow: :arrow: :arrow: :arrow: :arrow:
http://www.uspocketpcphone.com/id5.html
I am still working on it ... But , probably , you can get what you need .

Sprint,
Will this method unlock my device? Just want it to be unlocked. And I don't have SD card

Do you have SD card in your phone ?
Intresting ! I am on T-Mobil network and I am using AT&T ROM .
So :lol: What is the question about locking and unlocking ?
:?: Do you have SD card in your phone ?

Hey
Can I use an MMC card for flashing? I MIGHT be able to borrow an MMC card. Also, I dont have a card reader but I have a digital camera which I can use to transfer the ROM image from my desktop computer to the card. Would you think it would work? Thanks again.

Hello
As I know you cannot use MMS card ... But :?
Probably my info is to old :shock:

Oh that sucks guess I have to do it the hard way (EXE file). Wish there is a fail-safe way of doing the upgrade. Im' kinda worried to damage my device, just got hold of it. I just want it to be unlocked.

will the exe file below work for me?
http://cuba.calyx.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
and
http://www.xs4all.nl/~jsummers/XDA/XDA-developers-SER-v12.exe
This is my Device's Information
ROM version: 3.14.40ENG
ROM date: 11/26/02
Radio version: 6.18
Protocol version: 324e4
Pocket PC Version 3.0.12039 (Build 11178) (Don't know if this is 2002 or 2003 pocketpc)
Pls reply. thanks

if all you want is to make it unlocked then getting the
seriel sync cable and using the program on this site
is alot easier then you dont have to worry about ending up
with a door stop

Rudegar, can you give me the link for serial unlocking? A step by ste p guide maybe? I'll just search for some1 who has a serial cable here in the philippines. thanks

http://wiki.xda-developers.com/wiki/UnlockWiz/Wallaby

Related

Xda2unlock not a valid pocket PC application

I am trying to unlock a XDA II. I have downloaded the XDA II V 2.2 unlock program copied it to the SD card , tried running it and got that it is not a valid pocket PC application.
Please help me.
ROM Version 1.72.00WWE
ROM Date 03/15/04
Radio Version 1.17.00
I think the posted link are corrupted
please check unlock files. I think they are corrupted. got it elsewhere and it worked.
Sounds like
Hi ya,
Sounds like ur trying to run the exe on the pda... Thats not how it works! Read the instructions again and ur see...
You need to get your pda into a special mode, the run the exe on your PC making sure that you disabled communications to pda via USB. Now the program will work..

downgrading to WM2003SE

I reallly got a problem.
I installed Wm2005, but i dont want this.
now i tried to downgrade, but it says "wrong country id"
im a norwegian guy..
can anyone helps me ?
Checkout BA_Downgrade_WM5 thread
hi there are two kinds of upgrade programs one is
HimaUpgradeUt which needs country id to be correct or there is another
HimaUpgradeUt_noID which will do any even if country id is incorrect
contact me if you need further assistance or file thanks
Cannot Downgrade to 2003SE - SX66
I own a SX66 Cingulair (USA) and I recently upgraded the ROM to WM5 but now having a lot of problems with it. I need to downgrade it back to 2003. I followed all the instructions in the link given in one of the posts above but the program MaUpgradeUt_noID.exe does not recognize my existing ROM or the new one and no update happens.
Can anyone help me please.
DEK
Re: Cannot Downgrade to 2003SE - SX66
DEK said:
I own a SX66 Cingulair (USA) and I recently upgraded the ROM to WM5 but now having a lot of problems with it. I need to downgrade it back to 2003. I followed all the instructions in the link given in one of the posts above but the program MaUpgradeUt_noID.exe does not recognize my existing ROM or the new one and no update happens.
Can anyone help me please.
DEK
Click to expand...
Click to collapse
exactly the same here with SX66, but where did you get your ROM?
I also tried to apply SX66Upgrade.exe program which seems like WM2003SE installer, but this program says it cannot connect to device. I also was able to get nk.nbf from the temp folder and tried to run MaUpgradeUt_noID.exe with this one, but it goes to the final screen without actually reflashing PDA. PDA still has WM5 installed.
I made a backup copy of my previous Win2003SE ROM to a SD card and restored it now from file back to SD card, but cannot find the way how to initiate ROM restore from SD card. I've read instructions saying: Insert SD card, put PDA into bootloader mode, select to restore from SD card, but in my case I just see "Serial 2.07" after going into bootloader mode and nothing else.
Found a way to Downgrade
Hi all:
After so much testing in frustration I moved the new ROM file to PH20B folder in the WM5_pack_V3 folder and ran the program BaUpgradeUt.exe. Now I know for SX66 which is a PH20B1 device we are supposed to use MaUpgradeUt_noID.exe in PH20B1 folder according the the downgrade link (http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5)
I got the ROM from (http://sx66-blueangel.home.comcast.net/) which is version 1.40 and I am very happy with it. Before upgrading to WM5 I have unlocked this device using the unlocker program some where on this forum and I am not sure whether it has anything to do with MaUpgradeUt_noID.exe not working.
DEK.
[/url]
Downgrade to WM2003 from 2005?
Hi,
I loked at this forum and want to do the same thing as described within the thread, but on a IPAQ RX1955 from WM2005 to 2003.
Not sure of the ROM I downloaded form the links on the page will work.
Thoughts?
Thanks!
Mike

Need help on unlocking please,thanks!!

Hello all,
I tried post at the "sim unlock" thread for two days but no responds and hopefully might get some help here,here is my problem:
Just pick up an used SX66 and its locked to Cingular and I need to unlock it so I can use it with Rogers up here in Canada.
I have model number: PH20B1
ROM version: 1.32.10 WWE
RADIO version: 1.02.10
PROTOCOL version: 1337.35
ExtROM version: 1.32.115 WWE
I have spend two hours reading all 85 pages on the"all in one sim unlock tool" thread but can't find a definite answer.
I want to know should I leave the sim in or without when running the file.
Also, can I save the file on the SD card and run it with the file explorer or I have to save it on the pc and sync to the BA?
If someone knows which version of the file I need to unlock this phone please post and any help will be very much appreciated because I have never done this before and don't want to turn this into a paper weight on the my desk!
Thank you in advance!
I had my SIM in.
You can put it anywhere as long as you can find it with file explorer. Its really easy to do and it won't harm anything.
thejaredhuang said:
I had my SIM in.
You can put it anywhere as long as you can find it with file explorer. Its really easy to do and it won't harm anything.
Click to expand...
Click to collapse
Thank you for your post!
Do you have the SX66?
How did you do it?
Some said sync it with the usb cradle and some said use SD card and some said reboot before run the file explorer and reboot after its loaded so many different version and I am just lost!
Any help will be very much appreciate!!!
run the file from your device, and it should work
xplode said:
run the file from your device, and it should work
Click to expand...
Click to collapse
Hi xplode,
Do you mind me tell me what exactly should I do?
Can I save the file directly onto the SD card from my pc and from the SD card save on my phone and use the file explorer locate it and run it?
This phone is currently locked to Cingular and should I leave my Rogers sim in or out when I run the file?
What about someone mention about the phone could be suddenly lock and mentioned the code could be "00000000"?
Any help will be very much appreciated!
Thanks!!!!
dont you read wiki before asking ?
http://wiki.xda-developers.com/index.php?pagename=BA_Unlock_Sim
I will explain it as simple as possible
1.Download unlocker
2.Connect your device with activesync to the computer
3.Copy the exe to the device or sd card, i don't think it matters
4.run the exe
5.your phone is now inlocked
Here is the thread for unlocking, there is newer version of unlock tool with some resolved bugs
xplode said:
dont you read wiki before asking ?
http://wiki.xda-developers.com/index.php?pagename=BA_Unlock_Sim
I will explain it as simple as possible
1.Download unlocker
2.Connect your device with activesync to the computer
3.Copy the exe to the device or sd card, i don't think it matters
4.run the exe
5.your phone is now inlocked
Here is the thread for unlocking, there is newer version of unlock tool with some resolved bugs
Click to expand...
Click to collapse
Hi xplode,
Thanks for your reply!
Actually I bite the bullet and did manage to unlock the phone last night!
You can see my post several post above I did spend two hours reading the entire thread but still not 100% sure that's why I post.
I did the same thing like you mention and after I run the file there's nothing happen no message no indication the phone is unlock so I soft reset and turn it on again it pop a message to insert sim.
And I turn the phone off and put in the sim card "Viola!" it recognise my rogers sim and try a few test call eveyrthing is great!
I use the lastest 1.6 version on my SX66 and I really appreciate all the help from you guys here!
Thanks again and have a wonderful day!

How to upgrade ROm with nbh file

As newbie on this, anyone please guide me step by step to upgrade my P3300 rom with nbh file. My device is unlock already with current ROM 5.2.1908 (build 18125.0.4.2).
The procedure is given in almost every thread. It's simple really. Is your SPL version anything other than 1.11.0000 or 1.11.cmon? If yes then your phone is not unlocked. Unlock your phone by running USPL from here or the updated USPL from here.
Check if the USPL has worked by checking your SPL number. During phone booting at the white HTC screen your SPL should show either 1.11.0000 ir 1.11.cmon.
If it does you are free to flash any ROM. Get the ROM of your choice, put your phone into bootloader mode by pressing the voice record, power key and reset button simultaenously for about 5 seconds till you see a three colored screen. Attach it with USB and flash the rom using RUU.
thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted
stacknickel said:
thanks randythered for ur reply. I did w/o problem on USPL but how to use the nbh extention? where that nbh file I shall put in? pc or devise or on specific folder? I got the three colors already, then what next? pl. enlighted
Click to expand...
Click to collapse
do u have only .nbh file or along with .nbh file any other files are there ?
generally along with the .nbh file there are other files like romupdateutuility.exe etc.,
download those files also and save those files into your PC.
after unlocking your device then staup the device with bootloader mode (three color screen)
connect the Device with the PC by USB cable.
in the device display u will a word USB (left bottom corner)
run the Romupdateutility from the PC...
the process will guide u next steps ...
after the completion u will have new OS
Last I would recommend tht u also upgrade you Radio ROM (this is responsible for all the communication functions of ur phone i.e. calls, GPS, WiFi etc) which will enhance the communication capabilities.
Radio ROMs Link : http://wiki.xda-developers.com/index..._RadioUpgrades.
Note : before flashing any ROM or upgrading the RADIO kindly CID unlock your device or you will end up the with bricked device .
You can download my ROMs, they come with the full package
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
your device not properly CID unlocked...
unlock the device properly with USPL...
stacknickel said:
trying upload but without success...
after remember operation will take 10 minutes
it displays
"Error [270]: UPDATE ERROR
Image file is corrupted. Please check your Update Utility"
Did I miss something here? Pl. help
Click to expand...
Click to collapse
As sixthsigma said, did you check if the phone is correctly unlocked? Is the SPL showing 1.11.0000 or 1.11.cmon?
Secondly, what OS are you flashing on? XP, Vista or Windows 7?
Hi Randythered, IPL 1.25.0001 and SPL 1.27.0000
I am using your ROM RtR Manila v1.0
using XP
Well, firstly thank you for wanting to try out my ROM
Secondly, you haven't unlocked your phone properly yet. The SPL must be 1.11.0000 or1.11.cmon, depending on which USPL you use.
strange... hv tried several time but w/o luck...
now I notice that it cut out after '70' and jump into 100 with disconnecting
any choices of other USPL instead of the one attached here?
Did you flash the old USPL or the new one which is nosize? It is preferable to install the old one first. And then go for the cmon nosize USPL if need be.
From a noob to a noob
Hi, heres the procedure for upgrading your rom put as noob friendly as i can put it.
WHAT YOU NEED
1. HTC Artemis p3300
2. computer running Windows XP with activesync installed
3. Usb cable to connect to computer
4. The new rom that you want to flash
5. And USPL which can be downloaded at this page http://forum.xda-developers.com/showthread.php?t=311403
NB: For most of the newer roms you will probably need the updated nosize version of uspl http://forum.xda-developers.com/showthread.php?t=521406
PREPARATION
NB: Anything you need to backup or keep from your device do it now.
NB: in some cases you may have to hard reset your device before it will take the flash
1. Extract Uspl to your desktop
2. Extract the rom you downloaded to your desktop
3. Remove your sim chip and memory card from your device
4. Reset your device and sync with windows xp
UPDATING
1. In the USPL folder run the program called "start_uspl" and let it do its thing in the dos window,in
my case it goes to 70 and then jumps to 100,if you have been watching your device screen you will
see the linux penguin for a few seconds and it will change to a white screen.
A window will popup on your computer, do as it requests, when finished it will reset your device.
Sync your device with your computer again.
2. In your downloaded rom folder you should find a file called "ROMUpdateUtility.exe" or "Ruu.exe", run
it and a window will popup, do as it requests.
Your device screen will go tri-color(red,green,blue) and the rom update will begin, wait till it
finishes and thats it.
thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading
stacknickel said:
thanks soloman1 and others
finally I got it with removing the sim card and memory card prior to upgrading
Click to expand...
Click to collapse
same ting got me with my first rom thats why i thought to put it in, happy flashing (not in the naked way )
Lol I can't belive I forgot to tell you that!
It's ok. Thanks to u too randythered.
Do you have dedicate Manila in cab file?
Thank you, here you go!
sixthsigma said:
your device not properly CID unlocked...
unlock the device properly with USPL...
Click to expand...
Click to collapse
Sixthsigma...you said - "unlock the device properly with USPL..." - how do I do that?
I got the same error as mentioned when trying to flash using the numb3rs ROM:
http://thewingster.com/numb3rs.aspx
I ran the herald-uspl.exe file. and ended up with teh above error. My TMo Wing has the original ROM on it and the phone itself is probably unlocked. Ive had it for a year now. Do I need to call TMo to unlock or is there some app I can run to do this myself?
appreciate any help!
nevermind, it worked ok on the second attempt!

Question about RUU

Well about 1 week ago i buyed HTC Desire , created goldcard , rooted , and flashed LeeDrOiD and everithing is great , but my friend also buyed Desire and did everything like me except one thing. he did not created goldcard
Here is his phone info and question , can he put stock firmware back witouth having goldcard ?
What RUU should he download , etc.
baseband:
32.49.00.32u-5.11.05.27
kernel:
2.6.32.15-g2633d94 htc-kernel 18-2 #1
build
2.33.163.1 c277878 relase keys
soft
2.33.163.1
BTW phone is not bricked or anything , it works great but he worry about future (paranoia about possible hardware malfunctioning and warranty , selling phone with stock rom etc)
He have different provider and i gues my goldcard can not help him.
Thanks.
Goldcard is only connected to sd card. So your friend can use your goldcard to flash stock rom.
Sent from Oxygen
But my phone info had different sys info:
Android version:
2.2
baseband:
32.49.00.32u_5.11.05.27
kernel:
2.6.32.15-gf5a401c [email protected] #1
build
2.29.405.5 cl293415 release keys
soft number :
2.29.405.5.
But if i understand , to put back stock ROM on mate phone if needed i just need to figure out which ruu i need and my SD with goldcard img.
Sent from my HTC Desire using XDA App
sto0ka said:
But my phone info had different sys info:
Android version:
2.2
baseband:
32.49.00.32u_5.11.05.27
kernel:
2.6.32.15-gf5a401c [email protected] #1
build
2.29.405.5 cl293415 release keys
soft number :
2.29.405.5.
But if i understand , to put back stock ROM on mate phone if needed i just need to figure out which ruu i need and my SD with goldcard img.
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
So it is.
Sent from Oxygen
6.5 Can I use a goldcard from someone else?
Yes you may.
It is true that if someone else can read the CID of YOUR sd card (from his phone) and give it to you, with the CID code, you can make it a goldcard without a phone. Once you have a CID code, the other steps don't need a phone. Note that CID is unique to the card and not to the phone/region of the phone. You can have anyone anywhere read the CID code of his/card amd mail it to you. You can make it a goldcard without your phone. See also 6.6 below.
6.6 Can I create a Goldcard without a phone?
You can if you have Linux. You need a Laptop card reader slot and Linux. Once in Linux, navigate to a folder like /sys/block/mmcblk0/device/cid
I havent tested it out in a LiveCD. Check it out and tell me.
Programmers have tried writing applications to interface the sdcard in USB mode to get its CID number, but it needs a PCI slot or device-a phone-Either Android/Windows Mobile. A PC application may be specifically written for a PCI based card reader to read the CID, but such an application would be hardware specific for the particular brand of PCI card reader. You cant use it unless you are a programmer and know to do that. As far as I know there are currently no Windows programs that do that.
To clarify, Once again,
The only thing you need from your memory card to create a goldcard, is its unique CID number (which is inserted by the manufacturer of the card)
The CID is unique to a memory card. It is not specific to the device
You can get the CID of the sdcard from:
Any Android phone which can connect and use the adb command.
A Linux operating system running on a Notebook with PCI slot which can read a memory card. Note: YOU CANNOT GET CID FROM LINUX FROM A USB CARD READER of a PC/Laptop. You need the PCI card slot.
You can even get the CID from a Garmin proprietory OS or a Windows mobile based phone. There are utilities available online using these, which can be seen in a Google search.
Do not try to get CID from any PC via USB cable. It can display a CID code but not the correct one. It is said that "USB lies about the CID".
Click to expand...
Click to collapse
according to this thread , your friend can use your goldcard and ruu with the same build number in his phone info to unroot. so he doesnt need to worry about the future
Hope this will help.
Thanks , if anyone come to Croatia on vacation pm. me im buying Beer
Sent from my HTC Desire using XDA App

Categories

Resources