Develop Bugs

Main Board for XDA IIs

Hi, i bought an XDA IIs with a damaged screen, i got myself a new screen went to install it then noticed a crack on the main board, ive had a go at repairing it but with no luck, is anyone selling a main board for an IIs or know where i can get one?
If not it looks like i will just have to sell the bits
Any advice will be very much apriciated.

P.s the borad Id is 0X5

dappadan10012 said:
Hi, i bought an XDA IIs with a damaged screen, i got myself a new screen went to install it then noticed a crack on the main board, ive had a go at repairing it but with no luck, is anyone selling a main board for an IIs or know where i can get one?
Click to expand...
Click to collapse
What screen part number do you have? I have various xda 2s boards.
Richard

Hi, the part No is 60H0018-00
what sort of price are you asking for a board? I dont need the camera as it looks ok.

dappadan10012 said:
Hi, the part No is 60H0018-00
what sort of price are you asking for a board? I dont need the camera as it looks ok.
Click to expand...
Click to collapse
I'll have to check I have a '5. They are £50.
Richard

Sounds reasonable, let me know if you have 1

I'll fix your HTC phone or provide parts

Hey guys. I have gotten alot from this website so I would like to give back. I own and operate a mobile phone repair shop and would like to extend my services to this forum. Most of you seem pretty techical so even if you just want the part (microphone, ear speaker, Loud speaker, LCD) I will provide it for you at a low cost plus shipping of course. I mostly deal with hardware issues so please don't PM me or post asking about software, I am a total noob when it comes to that!
Thanks again to all the rom builders and contributers who have helped make my phone awsome!

If you can source the vibrate motor for an HTC S710 I would be forever grateful. Where abouts are you located?
EDIT: I see you're in Phoenix.

Most of the parts I carry are for US released HTC phones but often they carry simular parts. If you can post a picture of what it looks like I'll see if I have a match.

I will upload a picture in a little bit, however here are the specifications from the HTC Vox Service Manual for the motor;
JT0406-30CSR1, JNTECH, Cylindrical, 3V, 100mA, 12000+/-3000 rpm, 60/-, 20degC, 11.2*5.1*5.8mm
The cylinder has J7D05 printed on it and has 2 prongs that make contact to the pad on the PCB. I've tried many different other motors but none of them physically fit in the spot. So if you have any motor rated to those specs and is smaller or equal to the dimensions above, I will take it.

Here are two pictures of it. They are quite large, so not inlined. Not my camera, one of those funky digital ones that I have no idea how to adjust the focus on.
http://i25.tinypic.com/20psxg3.jpg
http://i25.tinypic.com/22dcb4.jpg

I'll check my inventory tomorrow. The shop is closed for today, it being the 4th of July and all.

Ah yes. Thanks, I shall await your response in great excitement.
Happy Indie Day!

A friend of mine has an O2 XDA Orbit but the usb works for charging but not for the data link.
Is this fixable? and if so, do you perform the fixes !!!!

@pna
I had the same problem with my Dash/Excalibur. I had to turn off the USB charging feature in the settings and then the data worked fine. I just either turn it back on if I need to charge via USB on my PC and don't have a wall charger handy. Tell your friend to try that.
Edit:
Also Turn off Advanced Network Functionality to along with charging over USB.

pna said:
A friend of mine has an O2 XDA Orbit but the usb works for charging but not for the data link.
Is this fixable? and if so, do you perform the fixes !!!!
Click to expand...
Click to collapse
If the pins in the socket look straight re-flow the solder on the mainboard or get someone to do it. It's fairly easy. New sockets are about $4 on fleabay but as there are multiple lines close together you do need skill to replace.
M.S

@h4waii
Sorry friend. I don't have one that looks like that by HTC. However the T-Mobile Sidekick 3 vibrator does look like it. If I had it here to test I would be able to look closer. Once again, sorry friend.

Planetneo said:
@h4waii
Sorry friend. I don't have one that looks like that by HTC. However the T-Mobile Sidekick 3 vibrator does look like it. If I had it here to test I would be able to look closer. Once again, sorry friend.
Click to expand...
Click to collapse
I do, however, stock them. pm me and I'll list it on eBay.I'm in the UK though so shipping will be dependant on where you are. Outside UK is £7.
M.S

Good, this is the point right? To help our fellow members. Thanks Mysterious Stranger.

Planetneo said:
Good, this is the point right? To help our fellow members. Thanks Mysterious Stranger.
Click to expand...
Click to collapse
Help if asked, yes. Spam to get sales, NO.
M.S

Anyway you can check out my thread here...http://forum.xda-developers.com/showthread.php?t=405758
Might find it intresting.

htc touch cruise
One of the give aways in buying this product is CoPilot Live 7 with free city map. I choose Muscat in Oman in English but I can not activate it. I went to the dealer but he wants me to pay to activate it.

Planetneo said:
Hey guys. I have gotten alot from this website so I would like to give back. I own and operate a mobile phone repair shop and would like to extend my services to this forum. Most of you seem pretty techical so even if you just want the part (microphone, ear speaker, Loud speaker, LCD) I will provide it for you at a low cost plus shipping of course. I mostly deal with hardware issues so please don't PM me or post asking about software, I am a total noob when it comes to that!
Thanks again to all the rom builders and contributers who have helped make my phone awsome!
Click to expand...
Click to collapse
Right on! I have been wanting to replace the metal bezel that goes around the front of the AT&T 8525 (U.S. HTC Hemes). Mine has gotten quite scratched and scuffed over the last year, and I would love to have it returned to it's original clean, shiny look.
Do you happen to carry this part by any chance? Or know of an affordable place to obtain one?

I get mine from a guy on ebay. I used my last 3 over the holiday weekend so I am out till I order some more on Monday. They are about $28 shipped. Link below....
http://cgi.ebay.com/HTC-Hermes-Cing...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

Planetneo said:
I get mine from a guy on ebay. I used my last 3 over the holiday weekend so I am out till I order some more on Monday. They are about $28 shipped. Link below....
http://cgi.ebay.com/HTC-Hermes-Cing...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Click to expand...
Click to collapse
If you need the full housing email Amit / Raki Computers and ask - they have them as well at not much more $ ( about $26 IIRC) if you ask although the parts they sell are used / stripped from BER phones so some have minor marks and it's pot luck.
M.S
edit - I emailed Amit @ Raki myself anyway and he's listed the full housings here: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=220254094906
better value IMO.

Yes. We've got software support and now hardware support. This thread needs to be stickied.

Dash 3G lcd & housing replacement

I might be 1st with this problem but not last for sure. Accident happend & I need replacement LCD for my new Dash. Anyone knows where I can get one? I can only see part of display. Will new housing be enough or do I need LCd as well? Repair manual anyone? Thanks everyone!

Anyone?
Maybe someone wants to sell their "brick"?

Anyone?
Maybe someone wants to sell their "brick"?

Dash 3g LCD
From what I'm hearing, the LCD for the Dash and the Dash 3g are the same thing.
Should be easy to find -

masseychris said:
From what I'm hearing, the LCD for the Dash and the Dash 3g are the same thing.
Should be easy to find -
Click to expand...
Click to collapse
Can anyone else confirm it? Any guides/step by step on how to do it? I assume I will still need to get a housing

First off, it would be good to know what exactly happend to your phone. Like, what kind of accident. I may be able to help you with the issue of getting the phone apart.

I have the US Sprint version of this (s511 HTC Snap) and have a cracked screen from a drop to the floor. There are dash replacement screens on ebay for $15-$30, but ot find any confirmation that it for sure is the same one. There are instructional videos on youtube as well. I haven't done it yet, also waiting for confirmation that the dash lcds are okay.

Just dropped my Dash 3g this morning and am looking for the same info. Dammit! Should have gotten the insurance!

i would also like to know if the gash screen is the same as the dash 3G to repair a phone.Anyone know? Thanks

Bump, I would also like to know. It'd be nice to snag one up from ebay and replace the screen P:

Hi
does anyone know if they are the same? Cant find any replacement screens for sale on ebay.

slaya said:
Hi
does anyone know if they are the same? Cant find any replacement screens for sale on ebay.
Click to expand...
Click to collapse
try www.cnn.cn. quiet reliable.

find below page and ask there:
I'll fix your HTC phone or provide parts
Hey guys. I have gotten alot from this website so I would like to give back. I own and operate a mobile phone repair shop and would like to extend my services to this forum. Most of you seem pretty techical so even if you just want the part (microphone, ear speaker, Loud speaker, LCD) I will provide it for you at a low cost plus shipping of course. I mostly deal with hardware issues so please don't PM me or post asking about software, I am a total noob when it comes to that!
Thanks again to all the rom builders and contributers who have helped make my phone awsome!
http://forum.xda-developers.com/showthread.php?t=405566
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=405566

another reff
http://www.mikechannon.net/page4.html
http://www.jetcitydevices.com/htc-snap/screen-repair

Screens and Repair Video Available
First, to answer one of the questions asked previously in this thread: This is not the same screen as the original Dash. The LCD itself might be but the connector is very different and the two are not compatible.
However, there are now several places online selling these. Just do a Google search for "t-mobile dash 3g lcd part only" and you'll find some people selling these. Note that they're quite a bit more expensive than the original Dash screens. That should change over time, though.
There's also a video of this repair on YouTube. You should be able to find that by doing a YouTube search for "Dash 3G Repair". This is actually a pretty simple repair (even easier than the original Dash) so if you're a little handy this shouldn't be too tough.

Anyone knows exact part number of screen? (Manufacturer and part number)
thanks.

DASH 3G parts
My just out of warranty Dash's trackball broke, I tiried to fix it myself and succesfully opened the dash3g, no good to me now so if someone wants a parts dash with no trackball I might be interested in getting rid of it, wend back to DASH 1 until I can get a Win 7 phone from MSFT .....

Display screen digitizer + LCD repalcement. HELP!!!

Hi sorry to bother I'm looking for a replacement of the whole display screen digitizer + LCD.
Does anybody can recommend a good one.
I've been searching on amazon but mayority of people complain about that the digitizer stop working on the repalcement after a while.
Any help appreciated.

There really isn't any "good one". If you want one that works, get an OEM one made by HTC.

Hey,
I think this might help you!
http://compare.ebay.com/like/290659299424?var=lv&ltyp=AllFixedPriceItemTypes&var=sbar&_lwgsi=y&cbt=y
Of course the higher you go the quality will probably be better but for $15 with free shipping I dont think you can go wrong if the first place, if it does not last long just order a new one!
If you have TEP you are better off getting it replaced by sprint for a new phone.
Good luck!
If I helped please hit that thanks button!
Stevo

I found a used OEM front panel (LCD & digitizer) in good shape on ebay shipped for $50. The guys at my sprint store are cool and installed it for me. That's half what asurion gets and you keep your software setup
Sent from my PC36100 using xda premium

don't different reversions use different lcd screens? i think i read that somewhere when i was looking into how much a new one was for my friend.

ou2mame said:
don't different reversions use different lcd screens? i think i read that somewhere when i was looking into how much a new one was for my friend.
Click to expand...
Click to collapse
There are two different LCD connectors, a wipe one and a "normal" one. The ONLY way to see what one your phone has is to open it up.

How to install 1920x1200 display on 1280x800 tablet?

Hello XDA Forum,
my daughter's tablet screen was cracked. A Chinese web shop offered replacement screen (lcd, digitizer & glass combo) and I ordered giving them correct model of the tablet. Now, I received physically perfectly fitting gear but I won't get any image on the screen. I can see backlight lit for a short while.
I swapped the faulty LCD/digitizer/glass back and could see picture just perfectly. So it seems like resolution issue. I even swapped the new LCD back while tablet was powered up (I know, I know..) and I could see picture in the replacement screen as well! But the image was distorted just like you've seen in CRTs when resolution/refresh don't match the screen capabilities.
Tablets model is Asus ZenPad 10 Z301M-1B006A. This site explains the differences pretty well:
w w w . p d e v i c e . c o m
/comparison/asus-zenpad-10-z301m-vs-asus-zenpad-10-z301mf
Even the GPU is same for 1920*1200 and 1280*800 system.
Actual replacement LCD is NV101WUM-N52 (1920*1200).
It perhaps should have been TV101WXM-NU1 (1280*800).
I saw some web shops giving possibility to select resolution but my Chinese web shop just asked the model. I have perfectly correct model in the order.
The sticker on the replacement panel says ATAB435 and "Asus Z301M Z301MFL" plus some Chinese chars. This suggests the LCD was indeed intended for Z301M/1280*800 tablet.
Now, the question is, could my replacement screen picture problem be due to wrong initial Android bootup resolution setting which I could possibly change with adb thus upgrade the tablet to 1920*1200 reso?
Hope this question made any sense at all.
BR,
Timo

karhulitos said:
Hello XDA Forum, my daughter's tablet screen was cracked..........
Click to expand...
Click to collapse
I don't have this device myself but, I did a little digging around...
First of all, I did see that the new display is actually compatible for your device.
If this were me, my next thought would be to go to the following manufacturers website FAQ section...
https://www.asus.com/us/Tablets/ASUS-ZenPad-10-Z301M/HelpDesk_Knowledge/
... and see if I can locate anything that's regarding the Display (ie... LCD, Digitizer, Display, etc...) to see if there was anything that may/might/does apply to your issue.
Personally stating, I can only assume that it may be tied to some type of Calibration or similar.
Just to clarify, if this were me, and nothing worked, I would just double check all the connections. Specifically for connections that may be loose, dirty, disconnected (by accident), etc... because things can happen when putting them together that was overseen/forgotten accidentally.
In addition, I would look at some YouTube videos in replacing the Digitizer Display for the same/similar device. I would do this only as a reference regarding what I did and see if I had overlooked anything.
If all is well and nothing was successful, I would personally feel that this Digitizer was simply defective. I would then look to begin the process of returning/replacing the Digitizer.
If I obtained the same Digitizer part, and the same happened, I would just look into return/exchange that one for the other part.
It's really hard to diagnose many items/issues without having the actual/same device.
I hope that this was helpful in some way and I had explained this okay via text.
I do wish you the best of luck!
~~~~~~~~~~~~~~~
Unless asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX Forum App on my Apple Macintosh.

Ibuprophen said:
First of all, I did see that the new display is actually compatible for your device.
Click to expand...
Click to collapse
First of all, your effort is highly appreciated. Thank you.
Very interesting. What made you think my replacement display combo (LCD: NV101WUM-N52) is compatible with Z301M? All hints I could gather was stating it's compatible for Z301MF* models.
I tried to look for this information but couldn't really find the proof.
Ibuprophen said:
Personally stating, I can only assume that it may be tied to some type of Calibration or similar.
Click to expand...
Click to collapse
This is my study hypothesis as well. First, I was thinking that my problem is just due to the LCD not understanding the signal sent to it by the GPU.
commands like:
Code:
adb shell
wm density DPI (Change display density)
wm size RES (Change display resolution)
might change the startup resolution so that the new LCD can show it and otherwise get initialized properly.
I was just puzzled that Google didn't give any hits of people doing this so I just couldn't believe I'm the 1st one to experience this. This is why decided to ask here.
What I do not know is can ARM or tablet hardware in general negotiate screen refresh/resolution/DPI information via the cable or is it always something which is hard coded in the firmware itself? After all a tablet isn't really a plug and play hot swap equipment, eh?
Only thing avoiding me to test above approach is that the web shop may want to replace my new LCD. Let's see how it boils. Is it broken or is it electrically unfit for the hw/sw model I have?
Ibuprophen said:
Just to clarify, if this were me, and nothing worked, I would just double check all the connections. Specifically for connections that may be loose, dirty, disconnected (by accident), etc... because things can happen when putting them together that was overseen/forgotten accidentally.
Click to expand...
Click to collapse
I hear you. I did this approximately 10 times. Some 5 times I switched back to the cracked 1280*800 and shows the picture fine. Back to NV101WUM-N52 and all I get get is backlight.
Ibuprophen said:
It's really hard to diagnose many items/issues without having the actual/same device.
Click to expand...
Click to collapse
Jep. I think I just need to send it back to China. But please come back to me and tell how did you come to conclusion the screen is fit for Z301M?

karhulitos said:
......... I think I just need to send it back to China. But please come back to me and tell how did you come to conclusion the screen is fit for Z301M?
Click to expand...
Click to collapse
I've seen that part number for your device within some other websites like Amazon, eBay and even Asus as a replacement part option.
I've seen this before. Sometimes a new device will have upgrade options when it's first launched.
I've got an Asus Transformer T100TA Tablet where this option was provided for the Digitizer, Memory and a few others.
As a matter of fact... I've got my Asus Tablet still apart with the newer Digitizer Display ready to be put back together. Unfortunately it's been ready to be assembled for approximately a year now (shame on me... LOL! ).
~~~~~~~~~~~~~~~
Unless asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX1 Forum App on my Apple Macintosh.

Ibuprophen said:
Unfortunately it's been ready to be assembled for approximately a year now (shame on me... LOL! ).
Click to expand...
Click to collapse
Pull yourself together and do it now! Thanks man for your insights.
BR,
Timo

karhulitos said:
Pull yourself together and do it now! .........
Click to expand...
Click to collapse
LMAO!!!
It's actually my first (and only) tablet I've ever owned. It's like a BIG Android... LOL!
I've got a good handful of various Android devices, 3 Laptops and 2 PC Towers (with 3 monitors). This list only includes what's actually working (also less the various parts as well). On top of the various projects I'm involved in bouncing from one to another as well as Life itself.
You can see why reassembling the tablet is actually something I want/need to do, it's just not very high on my priority list at this point in time.
I wish you the best of luck!
~~~~~~~~~~~~~~~
Unless asked to do so, PLEASE don't PM me regarding support. Sent using The ClaRetoX1 Forum App on my Apple Macintosh.

Ibuprophen said:
LMAO!!!
I wish you the best of luck!
Click to expand...
Click to collapse
Thank you.
One last detail for the record should someone else sometime stumble upon this problem.
Z301M original LCD is KD101N59-42NA-A8 which was later replaced, according to test report 081-170425-200, by TV101WXM-NU1 1280*800.
So be careful when ordering replacement screen for Asus ZenPad 10. There is also some green & yellow connector difference which wasn't involved in this case but I just wanted to mention it here.