Related
Please get the file http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
- Copy the file EnableCharPin.exe to you PDA
- Start the bonding dialog until you get the password screen
- Now launch the explorer and start the executable (you will get a small message)
- Get back to the password screen (if you don't find it click on the BT icon in the today screen)
- Characters are now enabled
To Gary: I replied to your mail but I get the following error: The destination server for this recipient could not be found in Domain Name Service (DNS). Please let me know if this solution works for you.
Best regards,
Tobias
i need your help with the bt patch
Hi,
I have downloaded the file from
http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
and looked for the exe file, to run in my xda2.
The exe is a PC installer (didn't work in my xda - not a valid win32 app...)
I finished the installtion process, and now in my add / remove programs i have "Bluetooth Character Password Enabler".
But when i'm trying to bond with my Navman,
still only numbers can be entered. :roll:
Any idea?
(maybe someone have the EXE to run on my ppc, not the installer?)
Thanks in advance,
Tomer
This is a bit unclear, I used towa´s patch like said earlier, followed exactly the instructions and could enable the charpin, and enable my navman
just download and COPY the patch to your xda true activ sync or whatever, and the start the bonding procedure, and when the screen for the pasword comes up, you lanch the explorer on your xda look for the charenable pin, click on it, it will give the message charpin now enabled, close the explorer and type in NAVMAN in big font, and it works perfect.
let us know if you got it to work
Thanks for you quick response.
I tried to do the process as explained:
copyed the file EnableCharPin.exe into my ppc
(via active sync), turned on my navman,
start BT, look for devices, found the navman gps one, next,
and now when the password screen appears i went to "my documents", clicked on the file, and than the error message 'EnableCharPin' is not a valid Pocket PC application" appears.
Any idea?
I saw a post in the forum about registry key or hack, to enable it,
whithout further information.
Thanks,
Tomer
Problem with EnableCharPin
The work that has gone into tying to solve the issue is impressive.
Unfortunately I have the same experience with the response 'EnableCharPin' is not a valid Pocket PC application'
Does anyone have a way to accomplish inputting alpha characters via changes in the registry?
ROM 1.52.00WWE date 10/23/03
Radio 1.05.15
Protocol 1337.15
ExtROM 1.52.86
Regional settings Swedish
Rgds
I have NAVMAN GPS and have the same error. Can anyone explain how is it possible that one can run Windows installer on XDA??
I have just installed this WIDCOMM BT manager. This thing at least is not asking for any pincode so I can easily establish the connection but later on i am not getting any data on the port. I am using ArcPad application by ESRI and I am supposed to use port 8 for GPS.
Can anyone tell me why there is no data comming thru the port?
Another problem is that the connection is lost after few minutes...
it works 4 me now
I did hard reset (upgraded my os / radio to 1.66.00 , 1.10.00)
disabled multilingual support,
installed the exe (FROM MY PC, NOT FROM THE DEVICE ITSELF),
and it solved the problem.
In the pairing process I managed to write NAVMAN (capital letters!),
without any problem
I hope it helps...
Tomer
Re: it works 4 me now
Hey Tomer !
Thanks for your tip. I have had problems with the connection, but I used your tip, and now it works perfect.
tomerbn said:
I did hard reset (upgraded my os / radio to 1.66.00 , 1.10.00)
disabled multilingual support,
installed the exe (FROM MY PC, NOT FROM THE DEVICE ITSELF),
and it solved the problem.
In the pairing process I managed to write NAVMAN (capital letters!),
without any problem
I hope it helps...
Tomer
Click to expand...
Click to collapse
Navman bonding
I dont have a problem getting the XDA II to bond with it, the problem I have is I can only select Com 7 in the Bluetooth tools menu and when I go to set up the GPS in Smartst it wont let me select Com 7.
Anyone have any ideas
I have a XDA and a Navmann 4100. A couple of weeks ago my Navmann dealer sent me the patch EnableCharPin & BTHTools1012 and I started the bond between the PPC and the 4100 and all went fine but a couple of days ago I suffered and full reset on the ppc and now I can not bond the ppc and the 4100 anymore.
Can someone tell what shall I do to bond once again the ppc and the 4100?
I have tried several times with the same process as before (EnableCharPin & BTHTools1012) but I had no succes, the ppc does not allow me to write Navmann, it only lets me write numbers.
towa said:
Please get the file http://www.angeltowns.com/town/bluetooth/EnableCharPin.zip
- Copy the file EnableCharPin.exe to you PDA
- Start the bonding dialog until you get the password screen
- Now launch the explorer and start the executable (you will get a small message)
- Get back to the password screen (if you don't find it click on the BT icon in the today screen)
- Characters are now enabled
To Gary: I replied to your mail but I get the following error: The destination server for this recipient could not be found in Domain Name Service (DNS). Please let me know if this solution works for you.
Best regards,
Tobias
Click to expand...
Click to collapse
I had this same problem when I had to do a hard reset with mine couldnt get it to rebond. The only way I managed it was to re install the character enable program. It seems to be specific on which order you do it unfortunately I cant remember what it was. I had to try it a few times myself for it to work.
The way I have managed to do it in the past is to make sure the PPC device is connected to your PC via active synch when you attempt to enter the characters (NAVMAN) That seems to in some way enable the enablecharaterpin software on the PPC. Let me know how you get on.
navman
probably the wrong place to ask but could that be used with the palm os ? ie charpin .exe
rudey wrote:
probably the wrong place to ask but could that be used with the palm os ? ie charpin .exe
Click to expand...
Click to collapse
Hi Rudey
Hard to say... I believe that a guy called towa wrote this for PPC, but if you look up his user name here and e-mail or PM him he might know
Hope that helps
Regards
Chris
Navman GPS One
Is it possible to get my 'old Navman GPS One' to work with my new Nokia N73?
Best regards
Martin
Enable CharPin
hi there
i tried a few links but i am unable to download Enable CharPin.zip from any for the link please can anyone help
many thanks
I upgraded...so I thought to this version...
Rom Version 4.01.16 eng
Rom Date 02/04/01
Radio Version 4.21.00
Protocol version 32s54 now I cant get into bootloader, cant use the phone, or internet on my SX-56...nor can I boot by flashing....What Have I done wrong should I just use it as a paper weight? Remeber If I press the power button and soft reset to just goes back to the Tmobile screen an continue to boot as a normal Alt-Ctrl-delete. I have tried xdairt and himayla..cant get it to work...
someone plz guide me through this I want my pda!!!!
Try the option fix-bootloader from the XDATools.
Then you should be able to enter the bootloader, and reflash your device...
HTH
Stefan
after XDA1 ugrade to 4.01.16 not able to do up/downgrade !
Have upgraded my XDA1 to ROM-version 4.01.16 Eng.
Now I wanted to install a different version, but I failed.
The PDA is working so far, but I can't upgrade/downgrade anymore.
When I use OSImageTool, there is a connection error displayed in the black command window:
ERROR: GetConnectionType - An existing connection was forcibly closed by the remote host. error getting connection type.
Can somebody please help me ?
Re: after XDA1 ugrade to 4.01.16 not able to do up/downgrade
Stefan_PDA said:
Have upgraded my XDA1 to ROM-version 4.01.16 Eng.
Now I wanted to install a different version, but I failed.
The PDA is working so far, but I can't upgrade/downgrade anymore.
When I use OSImageTool, there is a connection error displayed in the black command window:
ERROR: GetConnectionType - An existing connection was forcibly closed by the remote host. error getting connection type.
Can somebody please help me ?
Click to expand...
Click to collapse
There are many postings concerning this problem.....
You have to flash via SD-Card....
HTH
Stefan
Cant get into bootloader via pressing pwr botton and soft reset. I've have also hard reset the device and i still get nothing
Have you tried the fix-bootloader option from the xda-Tools?
Stefan
yes...but all i get is tthe command prompt...and i click yes is there something else i must do...tried edit2003 but still nothing
Cannot execute
Cannot execute "C:\DOCUME~1\Ovynten\LOCALS~1\Temp\Rar$EX00.203\RSUpgrade.exe"
wHAT THE [email protected]#$ DOES THIS MEANS? If uI could only understand this maybe I could get mt PDA working again.
I am a new XDA 2S owner and have a slight problem. The Cd that came with my phone that installs Fonix_voice dial , Zip, True Fax and SPB GRS Monitor on the users pc appears to be blank. There are no files on it. I had no problem installing the main Disc which has active sync etc. Has anybody got a copy of this application CD or knows where I could obtain one please. Thanks in advance.
I am sure you could get a copy if you tell your supplier that the cd is blank, maybe they will lend you one that you can copy or swap the one you have, it is their duty to supply a full working package.
Going to give that a try, thanks for your reply.
go to http://www.my-xda.com/xda2s_soft3.html and download xda IIs aplication suite v2002. its got the missing apps
Thanks very much graham. Downloaded it from your link. unzipped it and when I tried to use the voice dial feature it had an error message. Now what? Youve probably gathered Im not that clever with a pc. Any help gratefully accepted with thanks in advance. should I do a reset on the XDA2s then try again?
Fonix voice apps
what is error msg? - this might give some clues
does voicedial run at all?
u should not need to do a hard reset
a soft reset sometimes helps to get rid of data 'indigestion'
use activsync to install/remove the fonix apps u might try uninstalling the problem program and then reinstalling it again.
hi i'd like to know if theres someone who can fix this problem i have, when i go into communications to turn my bluetooth, it wont turn on, a window pops up and tells me it cant turn on, i cant even access the setting for it.
also everytime i start up my Rhodium, a error window pops up and says
BTTrayCE.exe
'BTTrayCE' is not a valid Pocket PC application.
someone plz help me with this thank you
DjSoundScan said:
hi i'd like to know if theres someone who can fix this problem i have, when i go into communications to turn my bluetooth, it wont turn on, a window pops up and tells me it cant turn on, i cant even access the setting for it.
also everytime i start up my Rhodium, a error window pops up and says
BTTrayCE.exe
'BTTrayCE' is not a valid Pocket PC application.
someone plz help me with this thank you
Click to expand...
Click to collapse
hi have you installed tomtom by any chance if so have a look here http://forum.xda-developers.com/showpost.php?p=4362258&postcount=6
cheers
DjSoundScan said:
hi i'd like to know if theres someone who can fix this problem i have, when i go into communications to turn my bluetooth, it wont turn on, a window pops up and tells me it cant turn on, i cant even access the setting for it.
also everytime i start up my Rhodium, a error window pops up and says
BTTrayCE.exe
'BTTrayCE' is not a valid Pocket PC application.
someone plz help me with this thank you
Click to expand...
Click to collapse
I have the exact same problems. I suspect the BTTrayCE error is from installing a version of tomtom that doesnt work on this phone (which i did do).
Any help regarding the bluetooth would be appreciated as mine behaves the same as described above (it basically only gives the option of connecting to bluetooth headphones...)
You will have to do a hard reset. You'll lose all your installed programs and settings.
If you remove the bluetooth drivers from the TomTom CAB you'll be able to install it without messing up the bluetooth (google to find a program to do this).
DuncanMcCloud said:
I have the exact same problems. I suspect the BTTrayCE error is from installing a version of tomtom that doesnt work on this phone (which i did do).
Any help regarding the bluetooth would be appreciated as mine behaves the same as described above (it basically only gives the option of connecting to bluetooth headphones...)
Click to expand...
Click to collapse
I got it sorted, did as was said on page 7. You must use total commander.
solution to tt7 bluetooth mess up
no need to hard reset. just rename and delete the following files and soft reset your device. woked for me.
\Windows\BtSdkCE30.dll
\Windows\BtCoreIf.dll
ive got the same problem, but i cant find the files. its in device\windows right?? where else might the files be?
Rename the files and replace them with the ones mentioned above. It fixed my problem.
DuncanMcCloud said:
Rename the files and replace them with the ones mentioned above. It fixed my problem.
Click to expand...
Click to collapse
I'm using Total Commander. When I try to rename the file, the file name remains as the original. When I try to delete the file, the screen tells me that it cannot delete the file. I have not installed Tom Tom or anything else. Help?
hi everybody. I have an error with bt in my excalibur. I can use file explore to sent a file via bluetooth(beam). But I can use Ressco Explore to sent. and I cant sent file to blackberry using Resso or default explore .( I can receive files from BB, when beam to BB, My BB "turned on receive using bt" but My excalibur cant found device).
so what can I do to fix it? I have trie any rom, but it have no change. Pls help me.
( sorry if My English is not fluent)
nobody help me?
i have the same error but just to let u know the problem to me only happen withc blackberrys but i cant receive any file throught bluetooth i have to use bluetooth explorer to take a file so i am also waiting for an answer
up for anbody know....
i think you are using lovebabyjing's wm6.5 which is a wonderful rom but has some issues with bluetooth. yes you can receive files from other device through bluetooth. after you activate your bluetooth and set to discoverable you also need to check the beam from the connection settings then it can already receive. just try and wish you luck...
ok i think that the problem is with bb bc i have try with other brands and mines right now is working i get an error saying like obex is not ready or not compatible also please be sure that when you are receiving the bt file from a bb you have to go to the media payer and then meny and go to the option that said receive file or something like that i do that but get an error
my problem is sending files to the bb
cbroce3012 said:
my problem is sending files to the bb
Click to expand...
Click to collapse
Me too........