Hi there could some one please help me.
While using Interent explorer on my artemis i keep getting the following error messages
Microsoft Jscript runtime error
Line 3 Character 1
Error: Object expected
Source Null
and further variations on line number and character number.
It has worked correctly without hitch till recently
I have removed all the latest software ive put on but it keeps giving me these messages.
i'm connecting throught my Wlan on my home network.
Many thanks..
I can't post in developer forum yet....
u ERROR [202, 204] : CONNECTION
This error message will appear when the device is not connected to ActiveSync correctly. Make sure you properly connect the device to the PC through ActiveSync before running RUU.
u ERROR [260] : CONNECTION
This error occurs when there is an “open port error” before upgrading the CE ROM image.
Solution: You can reset the device and run RUU again. If you still encounter an “OPEN PORT ERROR” again, reset your computer and try again.
u ERROR [206] : MEMORY ALLOCATION
u ERROR [280] : UPDATE ERROR
When you see any of these error messages, close other running programs on the computer and run RUU again.
u ERROR [208] : FILE OPEN
u ERROR [210] : FILE READ
These error messages indicate that RUU lacks certain important files and cannot continue with the update. Please get the complete RUU package again.
u ERROR [212] : FILE CREATE
u ERROR [214] : FILE WRITE
u ERROR [222, 224] : DEVICE NOT RESPONDING
These error messages will appear when remote access control has failed. Check the ActiveSync connection and try running RUU again.
u ERROR [220] : MAIN BATTERY POWER
This error message will appear when the device’s battery power is not sufficient. Although RUU will instruct you to plug in the AC adapter, it still has to make sure that your device has enough power to upgrade the radio. (Even when you plug in the AC adapter, the device is unable to charge the battery when it is upgrading the radio).
u ERROR [238] : FILE READ
This error message may appear when, for some unknown reason, the ROM image on the Mobile Device is corrupt. Download the whole RUU and try again.
u ERROR [240] : FILE OPEN
When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again.
u ERROR [242] : INVALID LANGUAGE
u ERROR [244] : INVALID MODEL ID
u ERROR [294] : INVALID VENDER ID
u ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
u ERROR [246] : DEVICE NOT RESPONDING
This error message indicates that RUU cannot start the update process. Please contact your service provider for assistance.
u ERROR [262, 276, 284, 302] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process.
Solution: If this happens, you can just soft-reset the device and run RUU again. The update process will then continue.
Note: At this stage, the Wince is destroyed; instead, it is in upgrade mode.
u ERROR [300] : INVALID UPDATE TOOL
This error message will appear when you use the incorrect RUU version to upgrade.
u ERROR [330] : ROM IMAGE ERROR
This error message will appear when you use the incorrect RUU to upgrade and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version to upgrade.
well,thanks man for the sharing
valuable information may be usefull just in case
I always end up with 270 error.
Hello There
I have run into a strange problem: when I copy video files into kindle I get this error:
An unexpected error is preventing the operation. Make a note of this error code, which might be useful if you get additional help to resolve this problem
Error 0x80070057: the parameter is incorrect,
What could be the problem?
Logged into sshdroid and i can see all my files and the phone files or whatever....but when i drag drop my new sound it doesnt allow it some error 4 stuff.
just wont work. oh and im a noob lol and ive been searching for a few hours nothing specific to my question.
General failure (server should provide error description).
Error code: 4
Error message from server: Failure
Request code: 3
is what i get when i try to write new file to phone.
Good day.
I have one problem.
Can anyone please tell me how to solve this problem?
Now, i have a bricked mobile of "IQOO3 5G(V1955A)".
This mobile working only fastboot mode.
(But, It does not accept the command.)
Therefore, I'd like to flash the rom by myself.
i tried it by QPFL.
But, i found the below error message.
-----------------------------------------------------------------------------------------------------------
ERROR: function: sahara_rx_data:277 Unable to read packet header. Only read 0 bytes.
ERROR: function: sahara_main:983 Sahara protocol error
ERROR: function: main:320 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
-----------------------------------------------------------------------------------------------------------
could you give me some advice how to solve this problem?
*Sorry, My mother language is not English.
Therefore, I think my English is not clear.
I am grateful for your support.
How you managed to enter edl mode in this phone, through test points or via commands or buttons?
Ryü[email protected] said:
How you managed to enter edl mode in this phone, through test points or via commands or buttons?
Click to expand...
Click to collapse
+1
Ryü[email protected] said:
How you managed to enter edl mode in this phone, through test points or via commands or buttons?
Click to expand...
Click to collapse
I used test point.
First, I tried EDL cable and command.
but, It were not run.
gengas10 said:
I used test point.
First, I tried EDL cable and command.
but, It were not run.
Click to expand...
Click to collapse
Ok fine any success for now, because my phone has weird problem with VoLTE calling.
Send this phone to customer care as your phone is in warrenty
gengas10 said:
Good day.
I have one problem.
Can anyone please tell me how to solve this problem?
Now, i have a bricked mobile of "IQOO3 5G(V1955A)".
This mobile working only fastboot mode.
(But, It does not accept the command.)
Therefore, I'd like to flash the rom by myself.
i tried it by QPFL.
But, i found the below error message.
-----------------------------------------------------------------------------------------------------------
ERROR: function: sahara_rx_data:277 Unable to read packet header. Only read 0 bytes.
ERROR: function: sahara_main:983 Sahara protocol error
ERROR: function: main:320 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
-----------------------------------------------------------------------------------------------------------
could you give me some advice how to solve this problem?
*Sorry, My mother language is not English.
Therefore, I think my English is not clear.
I am grateful for your support.
Click to expand...
Click to collapse
I think customer care will fix the phone for free
gengas10 said:
Good day.
I have one problem.
Can anyone please tell me how to solve this problem?
Now, i have a bricked mobile of "IQOO3 5G(V1955A)".
This mobile working only fastboot mode.
(But, It does not accept the command.)
Therefore, I'd like to flash the rom by myself.
i tried it by QPFL.
But, i found the below error message.
-----------------------------------------------------------------------------------------------------------
ERROR: function: sahara_rx_data:277 Unable to read packet header. Only read 0 bytes.
ERROR: function: sahara_main:983 Sahara protocol error
ERROR: function: main:320 Uploading Image using Sahara protocol failed
Download Fail:Sahara Fail:QSaharaServer Failrocess fail
-----------------------------------------------------------------------------------------------------------
could you give me some advice how to solve this problem?
*Sorry, My mother language is not English.
Therefore, I think my English is not clear.
I am grateful for your support.
Click to expand...
Click to collapse
Maybe this may work press power and volume up and you Can then choose option repair os or something like that and you can connect your phone to wifi and your phone will download rom and fix itself.
tejHackerDev said:
Ok fine any success for now, because my phone has weird problem with VoLTE calling.
Click to expand...
Click to collapse
Now, I don't success the ROM flash.
If i will success it, I will write the method in this page.
kartikgupta599 said:
I think customer care will fix the phone for free
Click to expand...
Click to collapse
Thank you for your suggestion.
Actually, My country doesn't have a customer center.
Therefore, I'll communicate customer center any other country by mail.
kartikgupta599 said:
Maybe this may work press power and volume up and you Can then choose option repair os or something like that and you can connect your phone to wifi and your phone will download rom and fix itself.
Click to expand...
Click to collapse
Thank you for your suggestion.
First, i tried it.
But, My mobile didn't catch any AP.
Maybe, Wifi driver has broken or erased I think.
Therefore, I think If i can success the below things, I can install the ROM(OS).
1. Install the Wifi driver by any method(Command of fastboot moder or any method).
2. Put on the Rom file in the SDCARD folder by any method.
3. Install the OS with dedicated software.
If you have any idea, Please suggest to me.
Thank you for your cooperation.
gengas10 said:
Thank you for your suggestion.
First, i tried it.
But, My mobile didn't catch any AP.
Maybe, Wifi driver has broken or erased I think.
Therefore, I think If i can success the below things, I can install the ROM(OS).
1. Install the Wifi driver by any method(Command of fastboot moder or any method).
2. Put on the Rom file in the SDCARD folder by any method.
3. Install the OS with dedicated software.
If you have any idea, Please suggest to me.
Thank you for your cooperation.
Click to expand...
Click to collapse
Theres no sd card slot in iqoo 3
Theres a option in fastboot to repair system in which you can connect your phone to wifi and the fone will download the rom and install it.
kartikgupta599 said:
Theres no sd card slot in iqoo 3
Theres a option in fastboot to repair system in which you can connect your phone to wifi and the fone will download the rom and install it.
Click to expand...
Click to collapse
Thanks for your suggestion.
I tried it from recovery mode.
But, My phone can't find any AP address.
Could you advice me how to connect wifi from My phone?
gengas10 said:
Thanks for your suggestion.
I tried it from recovery mode.
But, My phone can't find any AP address.
Could you advice me how to connect wifi from My phone?
Click to expand...
Click to collapse
Contact me on insta @Beasttechnerd