Related
Does anyone know how to correctly change CSC on the Canadian N975W? I purchased a used Note 10+ that the previous user bought from Samsung direct but had a Bell sim so the CSC shows BMC and has bell bloatware. I'm trying to change it to KDO but no luck with any firmwares yet. Any ideas or steps I'm missing?
Tried both KDO and XAC firmware but the file names seem that they're the exact same from both updato and SamFirm.
Using patched odin and everything loads fine - using CSC not the Home CSC.
?
Sent from my SM-N976V using Tapatalk
Trying to switch CSC and it won't change through normal method.
pearse said:
Trying to switch CSC and it won't change through normal method.
Click to expand...
Click to collapse
it should change depending on sim inserted as long as it contains the csc on the device.
you can use phone info or similar to see available csc.
you can also try *#272*IMEI#
Domt think itll help but i believe you could also install U and U1 firmwares to ur W variant. Maybe trying the U1 will help
hello all
plz i have an important question
Could I install firmware SM-N975U1 to my note unlocked from Canada model SM-N975W ??? same hardware
georgeelbob said:
hello all
plz i have an important question
Could I install firmware SM-N975U1 to my note unlocked from Canada model SM-N975W ??? same hardware
Click to expand...
Click to collapse
Maybe if u ask in a few more threads someone will finally answer u..
Or u can just try it
Only in the same muti-csc rom can change
Go to http://www.samkey.org/ to buy SamKey CodeReader – 15 points is $ 45 USD, and there are split sales on some trading platforms for about 3 points $ 6.6 This is what you want to do
Download the SamKey program on its website, and download the driver together if necessary
p40403 said:
Only in the same muti-csc rom can change
Go to http://www.samkey.org/ to buy SamKey CodeReader – 15 points is $ 45 USD, and there are split sales on some trading platforms for about 3 points $ 6.6 This is what you want to do
Download the SamKey program on its website, and download the driver together if necessary
Click to expand...
Click to collapse
Or just pay for chimera..at least it can change csc on g975u now
Hello
NEW UPDATE FOR R825F
To update with netOdin see here how to do it
https://forum.xda-developers.com/showthread.php?p=78800094
<b>0. This process will factory reset your Watch, so make sure you've backed up everything you need!</b><br /><br />
EF FILE EXTRACTOR
https://mega.nz/file/40NQ3YaL#JL5cq46ErZFoSFB-fxMmOsKBd44VDcMgUtOl8Ji8hrA
R825FXXU1CTK3_Tizen_4File_CSC (OXA).zip
R825FXXU1BTI9_Tizen_4File_CSC (OXA).EF_8ed7950f5d
https://www.androidfilehost.com/?w=files&flid=317516
R825FXXU1ATD1 OXA
https://drive.google.com/file/d/1LjhhPSb0-EaFakVrWjsh2Swlp5J6LeUo/view
R825FXXU1ATF2_Tizen_4File_Multi CSC (OXX).EF
https://www.androidfilehost.com/?fid=8889791610682941089
R825FXXU1ATA1 Tizen 4File (OXA)
https://mega.nz/file/85FCCQZS#WNb7HFUyT_Rj28J2wKCVXdojS9BR69pviWYae74p4N4
R825FXXU1ASJ3_Tizen_4File_Multi CSC (OXA)
https://mega.nz/#!Eg9TWCLB!iDOF-mzKk47yq7vZ17rAjhEAkZFg67Hci4TC5DfVIEM
R825FXXU1ASJ4_Tizen_4File_Korea (OKA)
https://mega.nz/#!plNViSab!y2uHnTtNHBpqzE3_E04T6-VyVDIrsQsWnWAisdwKKP0
R825FXXU1ASI7_Tizen_4File_Multi CSC (OXA)
https://mega.nz/#!9scnEaTJ!RRd9ZHG8hPTe2ZNGgzcunbx_Mn_SHCfoBkxpsMIiTa8
Can you share me password to download file?
Can you share me password to download file?
quocthanh150690 said:
Can you share me password to download file?
Click to expand...
Click to collapse
Try now, my mistake
Nmc_alves® said:
Hello
NEW UPDATE FOR R825F
To update with netOdin see here how to do it
https://forum.xda-developers.com/showthread.php?p=78800094
<b>0. This process will factory reset your Watch, so make sure you've backed up everything you need!</b><br /><br />
R825FXXU1ASJ4_Tizen_4File_Korea (OKA)
Soon
R825FXXU1ASI7_Tizen_4File_Multi CSC (OXA)
https://mega.nz/#!9scnEaTJ!RRd9ZHG8hPTe2ZNGgzcunbx_Mn_SHCfoBkxpsMIiTa8
Click to expand...
Click to collapse
please send me link firmware R825FXXU1ASJ4_Tizen_4File_Korea (OKA), Thank you!
taini said:
please send me link firmware R825FXXU1ASJ4_Tizen_4File_Korea (OKA), Thank you!
Click to expand...
Click to collapse
There e is
New update for Europe OXA
R825FXXU1ASJ3_Tizen_4File_Multi CSC (OXA)
Link on 1st post
we can change the cdc wtih this ?
New update from GW2 arrived. After updating watch my galaxy wearable doesnt show my watch face. I just keep seeing blue circle, like refresh or smth.
Sent from my SM-G975F using Tapatalk
Nmc_alves® said:
New update for Europe OXA
R825FXXU1ASJ3_Tizen_4File_Multi CSC (OXA)
Link on 1st post
Click to expand...
Click to collapse
Can you please share the link for the latest update for R800? Thanks.. Read that ONEUI 1.5 got released..
jaidev.s said:
Can you please share the link for the latest update for R800? Thanks.. Read that ONEUI 1.5 got released..
Click to expand...
Click to collapse
I dont have it for now... i wil post it in the section soon as possible
Nmc_alves® said:
I dont have it for now... i wil post it in the section soon as possible
Click to expand...
Click to collapse
Thank you so much.
Hi, can someone tell me is this works wit samsung pay and eSIM
Any chance to upload a combinations firmware too?
thanks in advance
Can I flash R825FXXU1ASJ3_Tizen_4File Multi CSC (OXA)? My current is R825FXXU1ASJ4_Tizen_4File_Korea. Thank you!
goldiee36 said:
Any chance to upload a combinations firmware too?
thanks in advance
Click to expand...
Click to collapse
+1
It would be great to change CSC for the R825F , I've got the german watch and I would like to change CSC.
I thought It would be as easy as it was with the Galaxy Watch / Active 1 , but the process seems to be more complex, involving combination file and stock firmware... So, we have stock firmware, Is there any way to get the combination file?
Any help appreciated!
guerrero.marcos said:
+1
It would be great to change CSC for the R825F , I've got the german watch and I would like to change CSC.
I thought It would be as easy as it was with the Galaxy Watch / Active 1 , but the process seems to be more complex, involving combination file and stock firmware... So, we have stock firmware, Is there any way to get the combination file?
Any help appreciated!
Click to expand...
Click to collapse
+1
+1
We need combination firmware to change region of active 2 no?. I have active 2 lte with version: R825FXXU1ASI7 / SM-R825FSKADBT and i cant use samsung pay and eSim. Any help please??
Thank you
I used the first OXA link to update my watch. Everything went well but now I am on Sweden CSC. I am in Australia and can anyone upload Australian update or combination file?
guerrero.marcos said:
+1
It would be great to change CSC for the R825F , I've got the german watch and I would like to change CSC.
I thought It would be as easy as it was with the Galaxy Watch / Active 1 , but the process seems to be more complex, involving combination file and stock firmware... So, we have stock firmware, Is there any way to get the combination file?
Any help appreciated!
Click to expand...
Click to collapse
Have you changed the csc yet? I have R825F german too, and i need to change csc because it doesnt work the eSim and samsung pay. Im from spain
juan97valero said:
Have you changed the csc yet? I have R825F german too, and i need to change csc because it doesnt work the eSim and samsung pay. Im from spain
Click to expand...
Click to collapse
Sorry, I gave up! I returned the german R825F to Amazon and bought the spanish one.
kazim.asghar said:
I used the first OXA link to update my watch. Everything went well but now I am on Sweden CSC. I am in Australia and can anyone upload Australian update or combination file?
Click to expand...
Click to collapse
https://drive.google.com/file/d/132-TfflpJpemssSV7QHbqy4DDI9Adqw5/view
here you are, if your watch is an australian one it will automatically pick up the code and you ll be back on stock.:good:
if it works hit thanks.
---------- Post added at 06:35 AM ---------- Previous post was at 06:32 AM ----------
Nmc_alves® said:
Hello
NEW UPDATE FOR R825F
To update with netOdin see here how to do it
https://forum.xda-developers.com/showthread.php?p=78800094
<b>0. This process will factory reset your Watch, so make sure you've backed up everything you need!</b><br /><br />
R825FXXU1ASJ3_Tizen_4File_Multi CSC (OXA)
https://mega.nz/#!Eg9TWCLB!iDOF-mzKk47yq7vZ17rAjhEAkZFg67Hci4TC5DfVIEM
R825FXXU1ASJ4_Tizen_4File_Korea (OKA)
https://mega.nz/#!plNViSab!y2uHnTtNHBpqzE3_E04T6-VyVDIrsQsWnWAisdwKKP0
R825FXXU1ASI7_Tizen_4File_Multi CSC (OXA)
https://mega.nz/#!9scnEaTJ!RRd9ZHG8hPTe2ZNGgzcunbx_Mn_SHCfoBkxpsMIiTa8
Click to expand...
Click to collapse
By any chnace can you upload any firmware with CSC INU inside??
I've tried to debrand my phone by flashing open market firmware (XEO, Poland). I downloaded the newest version of Odin, flashed it but now my CSC under settings says OPV/OPV, OPV/EUX/OPV. OPV is my carrier's CSC, I'm wondering what that EUX is. I've looked it up on Google and it seems like I'm not alone, seems like Samsung changed something and older methods no longer work. The question is - will I still receive updates released for my carrier or I'm screwed for good? Phone INFO app says my active CSC is OPV. I'm running S20+ 5G (G986B) Exynos variant.
Same problem here, I've flashed it with XEO POLAND G986BXXU1ATBM firmware using Odin3 v3.14.1_3B_PatcheD, few minutes later it showed "PASS" and nothing changed. Same branded firmware after reboot..
It seems, that many more 'branded' CSCs are now part of Multi-CSC. For me, this is DTM (T-Mobile DE). It osed to not be part of multi-CSC but it is now part of OXM.
This means, that you can not force it anymore, as you already ARE having the exact same firmware with the 'branded' CSC. Just checked, OPV is in deed part of OXM now.
In the Ultra Section is a thread showing the CSCs belonging to OXM: https://forum.xda-developers.com/ga...galaxy-s20-ultra-g988b-firmwares-5g-t4060443/
I have not yet found out / gotten an answer from anybody how to change CSC. Samkey also is not supporting the S20 series ATM - dont know, if this will change.
Monnq said:
I've tried to debrand my phone by flashing open market firmware (XEO, Poland). I downloaded the newest version of Odin, flashed it but now my CSC under settings says OPV/OPV, OPV/EUX/OPV. OPV is my carrier's CSC, I'm wondering what that EUX is. I've looked it up on Google and it seems like I'm not alone, seems like Samsung changed something and older methods no longer work. The question is - will I still receive updates released for my carrier or I'm screwed for good? Phone INFO app says my active CSC is OPV. I'm running S20+ 5G (G986B) Exynos variant.
Click to expand...
Click to collapse
What I have worked out is that when you flash a multi-CSC firmware file you end running the CSC one letter earlier in the alphabet out of the. Available multi-CSC list
E.g. I had a VOD branded S105G and flashed BTU firmware, and ended up with TEL CSC
I also tried flashing BTU on an H3G branded A70 and ended up with EVF CSC
The original branded product CSC also never changes
---------- Post added at 11:32 AM ---------- Previous post was at 11:30 AM ----------
Andrino said:
Same problem here, I've flashed it with XEO POLAND G986BXXU1ATBM firmware using Odin3 v3.14.1_3B_PatcheD, few minutes later it showed "PASS" and nothing changed. Same branded firmware after reboot..
Click to expand...
Click to collapse
Enable Developer mode and set OEM Unlock to ON before trying to change CSC via ODIN Flash
This should not be necessary? Doesn't that trip Knox, despite original Samsung Firmware?
corwin_amber said:
It seems, that many more 'branded' CSCs are now part of Multi-CSC. For me, this is DTM (T-Mobile DE). It osed to not be part of multi-CSC but it is now part of OXM.
This means, that you can not force it anymore, as you already ARE having the exact same firmware with the 'branded' CSC. Just checked, OPV is in deed part of OXM now.
In the Ultra Section is a thread showing the CSCs belonging to OXM: https://forum.xda-developers.com/ga...galaxy-s20-ultra-g988b-firmwares-5g-t4060443/
I have not yet found out / gotten an answer from anybody how to change CSC. Samkey also is not supporting the S20 series ATM - dont know, if this will change.
Click to expand...
Click to collapse
Since now it's part of Multi CSC, does that mean I will receive updates faster? I can see other polish carrier's CSC are listed as single so I assume they are kind of separate firmware, am I right?
Honestly I do not know, if the respective CSC will be getting OTAs at the same time.
However, you can always flash manually with HOME_CSC, that is true.
corwin_amber said:
This should not be necessary? Doesn't that trip Knox, despite original Samsung Firmware?
Click to expand...
Click to collapse
Enable OEM unlock does not trip Knox. As long as you flash official Samsung firmware files in Odin Knox is never tripped
My own personal experience on S10 and above is you cannot flash a different CSC with OEM Unlock disabled
(Flash completes successfully but CSC doesn't change)
When changing from one e.g. branded csc to multi csc with the S10+, this worked fine without enabling oem unlock. Well, anyway. Flashing OXM multi CSC over OXM multi CSC will not change anything, right?
corwin_amber said:
When changing from one e.g. branded csc to multi csc with the S10+, this worked fine without enabling oem unlock. Well, anyway. Flashing OXM multi CSC over OXM multi CSC will not change anything, right?
Click to expand...
Click to collapse
I found that you have to be on a single CSC before flash to multi-CSC and also you don't always end up on the CSC you expected
e.g. Flash BTU on a VOD product and you end up on TEL CSC (one letter in alphabet below VOD) and not on BTU
did everyone succesed DEBRAND ?
i v got s20 ultra OPV(orange) and need XEO (official)
tak, poprzez samkey
Yes, with samkey
@0kti if you have any credits remain let me know please ( I will buy it )
I found link to our android com pl forum , thanks
Nope. Buy on ebay. It's cheap. 3 credits.
Tapatalk - SM-G986B
one credit please, somebody will share ?
raphaelx69 said:
one credit please, somebody will share ?
Click to expand...
Click to collapse
really lmao.. its literally a few bucks... chimera tool works great also but is a mpre expensive subscription but dont gotta kee0 buyin credits
Hello community!
I recently bought a Samsung Galaxy S20+ (SM-G985F) which is carrier branded and sim locked. I am looking to remove the carrier branding by using a unbranded firmware. I am trying to find an unbranded firmware that will not affect the functionalities of the phone ( VoLTE, VoWiFi etc..) . Would this be done by finding a firmware with same PDA but different CSC?
Current Branded Firmware:
Version G985FXXU3ATG4 / G985FOWA3ATG4 / G985FXXU3ATG4
Product Code: PGU
Would this firmware work?
Product code LUX
PDA G985FXXU3ATG4
CSC G985FOXM3ATG9
Thanks in advance for your help!
@servenaya
if you have a sim card of Guatemala and you want to keep VoLTE, VoWiFi etc.. for this country
install Version PDA G985FXXU3ATG4-CSC G985FOXM3ATG9
and change your CSC to GTO ( with préconfiguration for TIGO_CGU , PCW_PA and Claro_DR )
LUX have only préconfiguration for Luxemburg ( Proximus , POST , Tango , Telenet , Orange B and LUX )
regards
yakapa40 said:
@servenaya
if you have a sim card of Guatemala and you want to keep VoLTE, VoWiFi etc.. for this country
install Version PDA G985FXXU3ATG4-CSC G985FOXM3ATG9
and change your CSC to GTO ( with préconfiguration for TIGO_CGU , PCW_PA and Claro_DR )
LUX have only préconfiguration for Luxemburg ( Proximus , POST , Tango , Telenet , Orange B and LUX )
regards
Click to expand...
Click to collapse
@yakapa40, thank you! This information is very helpful. I do have a Claro Guatemalan sim and even though the carrier does not support VoLTE, or VoWifi, I would like to keep this features in case they implement them in the future. I did find a firmware with the recommended PDA and CSC (Country South East Europe, Product code: SEE, PDA: G985FXXU3ATG4, CSS: G985FOXM3ATG9). Would this firmware work? From what understand, I would have to first flash this firmware, then change de CSC with Samkey to GTO and lastly, factory restore the phone. Is this correct?
Also, would you recommend using Samkey to perform a carrier unlock before changing the CSC or could I do it later on? I read that Samkey only works for phones that dont ask for unlock code. Mine does ask for a code when I insert another carrier's sim.
Thanks in advance for your help!
save all your data
install new firmware
you have a free apk here to change the CSC:
https://forum.xda-developers.com/showpost.php?p=82858645&postcount=37
yakapa40 said:
save all your data
install new firmware
you have a free apk here to change the CSC:
https://forum.xda-developers.com/showpost.php?p=82858645&postcount=37
Click to expand...
Click to collapse
@yakapa40, Thank you once again. Just want to make sure that the firmware mention before is the best one to use? I have attached the software information from my phone. Please let me know your opinion.
yes all is ok with your firmware
PGU:
GTO:
yakapa40 said:
yes all is ok with your firmware
PGU:
GTO:
Click to expand...
Click to collapse
@yakapa40 Thank you for your help. You are extremely knowledgeable on this topic! To be honest, I just realize how little I know about flashing even though I've been doing it since 2012. I feel like I understand firmware flashing less than I did before.
I just have a last question. If I flash the firmware with a CSC NEE, and than do the CSC change to GTO, which CSC will be used for future OTA updates? What I mean is, if there is a new NEE firmware will I get it, or will I have to wait for a new GTO update? Sorry, I am little confused with all of this.
G985F OXM is a multi CSC so if you flash the firmware with a CSC NEE , you will get XEF CSC by default
, and when you change to GTO you will get GTO OTA updates
https://forum.xda-developers.com/galaxy-s20/how-to/s20-g985f-firmwares-t4060279
yakapa40 said:
G985F OXM is a multi CSC so if you flash the firmware with a CSC NEE , you will get XEF CSC by default
, and when you change to GTO you will get GTO OTA updates
https://forum.xda-developers.com/galaxy-s20/how-to/s20-g985f-firmwares-t4060279
Click to expand...
Click to collapse
@yakapa40, I was finally able to flash the phone. I followed the steps and got the GTO CSC and the unbranded firmware working! Thank you for helping me throughout the whole process. The only down side was that I still lost the VoLTE and VoWifi options. When I look at the Sim Card Status menu, the IMS registration Status is "not registered". :crying:
Hi All,
I have a Samsung Z fold 4 ‐ SM-F936N model (Korea version). I want to use it in India. Can I flash BL, AP and CP from SM-F936N firmware and CSC and Home CSC from SM-F936B (india compatible version)'s firmware (CSC as OXM, and Home CSC as INS)?
Want to do this primarily for Samsung Pay and removing Korean telecom files which came installed by default.
Also, assuming it is possible, will it impact OTA update?
Pdash said:
Hi All,
I have a Samsung Z fold 4 ‐ SM-F936N model (Korea version). I want to use it in India. Can I flash BL, AP and CP from SM-F936N firmware and CSC and Home CSC from SM-F936B (india compatible version)'s firmware (CSC as OXM, and Home CSC as INS)?
Want to do this primarily for Samsung Pay and removing Korean telecom files which came installed by default.
Also, assuming it is possible, will it impact OTA update?
Click to expand...
Click to collapse
I Can´t speak without doubs, but, AFIK, you can´t mix firmware files nor use firmwares from different HW versions...
Pdash said:
Hi All,
I have a Samsung Z fold 4 ‐ SM-F936N model (Korea version). I want to use it in India. Can I flash BL, AP and CP from SM-F936N firmware and CSC and Home CSC from SM-F936B (india compatible version)'s firmware (CSC as OXM, and Home CSC as INS)?
Want to do this primarily for Samsung Pay and removing Korean telecom files which came installed by default.
Also, assuming it is possible, will it impact OTA update?
Click to expand...
Click to collapse
No different models You will end up with a bricked phone.
cooldude20000 said:
No different models You will end up with a bricked phone.
Click to expand...
Click to collapse
Thanks for your post. Saved me from attempting a disaster.
rafafischer said:
I Can´t speak without doubs, but, AFIK, you can´t mix firmware files nor use firmwares from different HW versions...
Click to expand...
Click to collapse
Thanks a tonne for your reply. Not gonna attempt it.
I have the same problem. I am unable to change the primary csc and it won't pay
luisvaljun said:
I have the same problem. I am unable to change the primary csc and it won't pay
Click to expand...
Click to collapse
Flashing firmware does not change csc u have to use something like samkey or samfw csc changer
Can you use 5G in India I have the same model and I can’t I want to use 5G
I successfully flashed my fold4 from US Verizon to US AT&T but video call doesn't work. Flashing from completely different region models might be more problematic.