How do i force my game(bgmi) to use gpu instead of cpu.
I am trying to unlock 90 fps. Somehow unlocked using adb shell to force game to use min refresh rate of 90 but its reverting back to below 60 frames when i start a match.
Also i noticed game uses my CPU upto 100% and GPU only 7-8% ?
why?
What is the use of adreno 660 then?
can anyone help or explain me this?
Related
Hey,
I have found this video on YT: http://www.youtube.com/watch?v=jrJM5OVpmMI .
He wrote: "Cpu is not overclocked. I have rooted phone."
And I'm confused ;\ why this guy a way better fps in this games? Shadowgun Dead Zone in UNPLAYABLE on my htc one v. In Trial Extreme 3 I have about 33% less FPS :\
btw. I have cleared cache\ram. I have 150mb of free ram.
I have found a work around method so I'll write it down, maybe it will be useful for someone:
I dunno why this guy has so good fps on a 'standard' device but I have found a good way to increase fps in games:
If you have CyanogenMod go to settings and at the bottom you will have 'performance' option; inside you can find 'processor', inside maximum something. - go there and change 1024MHz to 1400MHz. Also change 2nd option from ondemand to SMARTASSV2. That will gives you better performance when processor will need it, like in games. In fact it gives about 30% more fps without any serious consequences. (No, no serious battery draining or crashing or anything).
Hello, this tablet can play some 720p HEVC video without any problem, but when it comes to higher resolution as 1080p there is some lag etc...
i rooted the device, installed xposed, custome kernel etc, i was now able to see the frequency, and i noticed that if the cpu frequency go below 1800 mhz, the hevc video lag, so i think this device can play hevc well if the frequency stop moving like this...
The problem is that even if i'm using performance governor, the frequency is still moving from 2 ghz to 1.2, is there any way to make the cpu frequency fix ? thx
PS: sorry for my english
Use a custom kernel with O/C support and set the cores to max.
So I've been watching movies on my VR headset (Bobovr Z4, highly recommended if you want to try out VR) and have noticed that the G4 overheats like crazy. The ambient temperatures where I live fluctuate between 50 deg F and 90 deg F depending on the time of day and the month. Even at cooler night temperatures, my G4 would heat up to the point of shutting itself off after around 20-25 minutes of watching a movie with no orientation sensors being used (static side by side video) and brightness at around 65%. This got incredibly annoying so I wanted to see what I could do about it.
I've tested out @Robshr's CTT mods and all 4 versions had issues that I didn't know how to fix, from the phone not charging at max Quick Charge speeds to overheating quickly. I've been running a modified version of the default CTT from the 13B rom from Verizon and it was fine for normal & gaming use but VR caused massive overheating so I modified it even further.
What I've found from testing is that the thermal mod values will take over any type of other settings you try to set with apps like Kernel Auditor or EX Kernel Manager (If you're using SetCpu, I'd highly recommend you switch to something else because it is outdated and doesn't know how to manage the big little core setup on the G4 and most newer phones) once your phone hits the temperatures set in the thermal-engine-8992.conf file. This means that you basically can't limit the max clock speeds of your phone once it reaches the temperatures set in the conf file. For example, the lines from the default conf file state for the little cores:
"thresholds 50000 53000 60000
thresholds_clr 48000 51000 58000
actions cluster0 cluster0 cluster0
action_info CLUSTER0_MAX 1248000 960000"
When my phone reached 60 degrees C, I couldn't limit the clock speed of the little cores using EX Kernel Manager below 960 MHz. I could set it below 960 MHz in the manager but it would show that the clock speeds still reached 960 MHz. What I did was decrease the max speeds the cores could hit at certain temperatures and raised the temperature limits by a little bit. What this does is throttle harder at higher temperatures instead of lower at lower temperatures and allows the phone to stay at lower clock speeds if set by a kernel managing app. I've found that 600 MHz is more than enough to stream 3D movies from my PC to my phone without issues using ES File Explorer. EX Kernel Manager allows me to limit the clock speeds to 600 MHz by switching to the power saving mode. Turning it off allows my phone to hit normal clock speeds again, which can be set using EX Kernel Manager at their max values allowed by the chip (higher than what LG limits them to I believe). From my tests so far, using the 600 MHz limit for VR 3D movies allows my phone to operate for around 40-50 minutes before displaying a overheating message which is a significant improvement from before. I don't use Marshmallow because it doesn't have root on Verizon so I can't help you if you have a Marshmallow rom.
Installation:
Extract the rar and move the thermal-engine-8992.conf to the /etc/ folder and replace the one that's in there (make a backup of that file first). Set permissions to RW R R and reboot. Highly recommend using EX Kernel Manager in conjunction and limiting the clock speed for movies. For games, you probably need higher clock speeds.
v2: Updated to not decrease brightness so much at higher temps.
Hello, I want to know how I can force the 90 hz refresh rate in all apps and games since in certain apps and games the 90 hz does not remain constant. For example, I wanted to play pubg mobile and it was played at 60 Hz, even with 90 Hz active, something similar happens on YouTube. and many other apps. Anyone know how you can force 90 hz whether with a root method or not ...
Adriancris7 said:
Hello, I want to know how I can force the 90 hz refresh rate in all apps and games since in certain apps and games the 90 hz does not remain constant. For example, I wanted to play pubg mobile and it was played at 60 Hz, even with 90 Hz active, something similar happens on YouTube. and many other apps. Anyone know how you can force 90 hz whether with a root method or not ...
Click to expand...
Click to collapse
it depends on the app, if an app was not designed to run at 90hz, it will not use the 90Hz screen...
Also depends in compatibility, some apps were designed to run 90hz on high end phones with powerful processors (which is the case for PUBG) but will not do so on mid tier SoCs
CpaoV said:
it depends on the app, if an app was not designed to run at 90hz, it will not use the 90Hz screen...
Also depends in compatibility, some apps were designed to run 90hz on high end phones with powerful processors (which is the case for PUBG) but will not do so on mid tier SoCs
Click to expand...
Click to collapse
Maybe, but i tell you something. I had a mi 9 and I overclock the screen to 84 hz, all the interface was smooth. I think is not an apps issue. i think is a system cap... Because I can a 90 fps or 84 fps in pubg mobile with a hex editor trick. And here because of that I cant do it..
After playing games likes Catalyst black, Apex Legends, Wild Rift etc, the CPU cores Just misteriously go down.
By misteriously, i mean that even with graphics scaled down and not necessarily at the maximum, the CPU Just progressively scales down to the lowest frequency It can scale at, sometimes the big and prime cores scale as low as 1075 MHZ and 710 MHZ.
I tried everything, by magisk i tried disabling the thermal engine using the thermal.apk, i tried changing TCP congestor, i tried changing thermal profile, i tried changing multiple ROMs and CPU governors, problems Is still there.
Help me with this plz, if saving from heating Means scaling from 144 to 40FPS, i'm definitely not with Xiaomi on this One.
Oh by the way, i don't know if It has something to do, but through the Konabess APP, i've set the GPU to 905 MHZ, Set the DDR Memory channels to 11 and cache to turbo L0.
No for me, Genshin Impact, Apex, Lol, etc its stable in EEA 12.5.
Maybe hot in Apex and Genshin in 30 min...
It's a security thing to prevent overheating,but only on stock rom,just flash another rom then.
Its happened due to security reason to protect from CPU overheating. I'm also facing this issue while playing Apex Legends. Basically I've got Apex Legends redeem codes and try to play apex and after couple of minutes my cpu overheating.
Really Nice Content also check Rodeo