I don't flash any stock rom since Q3 2016 and now i need newer base to flash latest customs. What is best stock rom that i can flash via QPST? I mean which one is most actually (i know there is oreo but it's hard to find no modded version)
Deep flash cable
I needed to make a deep flash cable. It was impossible to get into EDL. I had installed stock ROM while the drive was encrypted and the new install was installed in it just fine, but the pattern was only a piece you needed to decrypt. The rest was in the OS I wiped. So I had to use the cable to get into edl.
Instead of EDL flash cable use this trick
Connect your phone to your PC in EDL mode:
Youtube Video: v=DexLELi04XY
Title: EDL MODE Lenovo Z2 | Lenovo z2132
(sorry, can't post link)
Dear members, this is my first post and the problem is very complicted, so please bear with the long post
Device details:
LeEco Le1s (x500)
MTK6795 chipset
3 GB + 32 GB
Background:
I downgraded my ROM from 19s to 14s with SP Flash tool and the phone booted normally. I went through the initial setup, unlocked Developer mode and USB debugging. Then I opened the adb toolkit on Win 7 x86 machine to unlock bootloader and install twrp custom recovery at single go (instead of letting phone rebot after bootloader unlock and then proceeding with recovery flashing).
Now phone went to soft brick, to overcome which I needed to flash userdata with sp flash tool (I have done this in past also following a tutorial, the same files were used this time). But flashing process resulted in BROM error and I was not successful.
So, I re-flashed the original 14s rom via SP flash tool to get the things back to working, but phone didn't boot properly and bootloop situation was still there. I again reflashed the same ROM and this timephone entered red light of death mode, and didn't boot up after flashing original rom.
Now, I again googled this problem and found that we need to format flash with bootloader. Here the problem complicated further.
As soon as I formatted the flash and the bootloader, laptop stopped detecting the phone via usb cable. Now I can't flash any rom using SP flash tool as the phone is not detectable.
I have reinstalled my windows 7 32 bit operating system and reinstalled all the drivers for MTK smartphone. I have another Le1s phone running on 19s version of EUI marshmallow with stock recovery and locked bootloader which is detecting fine without problems.
Please guide me how can I resolve the problem.
Also guide if the other phone can anyhow help in this matter in terms of software backup for SP flash tool (I couldn't find a way of backing stock rom using SP flash tools.
Problem summary:
1) Flash with bootloader formatted
2) Phone is not detectable on Windows 7 32 bit OS and latest SP flash tools
3) Red LED turns on when phone connected to charger or laptop via usb cable,nothing on LCD display
4) Can't reach bootloader or recovery either
Help will be really appreciated. You all know the value of data stored on smartphones.
Thanks in advance!!
Redmi Note 8 Pro Global 128gb 6gb
Here's my story,
I was using Android 10 with TWRP before and then I bricked my phone by installing some magisk module and was stuck in bootloop. I was going to re-flash A10 global fastboot rom but I accidentally installed A9 instead and thus, my phone was hard bricked. Dead screen and only led notification light is on.
Here are the steps on how to unbrick your phone. (Not 100% sure if it works but we've got nothing to lose since our phone is already hard bricked.)
1. Try to install any A9 stock rom on your phone through "flash_all.bat" inside your A9 stock rom and wait for it to finish or at least long enough when you feel like it's stuck. (https://www.youtube.com/watch?v=cn5F12ixLB8)
You can download stock roms here (https://mirom.ezbox.idv.tw/en/phone/begonia/)
2. Assuming you have installed most of A9 stock rom including preloader, try to flash "preloader_begonia.bin" and "lk.img" found here (https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527) and follow instructions on how to flash both files.
3. Download and install MiFlash Pro (https://mega.nz/folder/xZtzjRQI#p24N5i5Xi1S_KXPGK4Hk4w)
4. (https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/) Follow this tutorial starting from step 3 and wait for around 5 mins until "Download OK" shows up and then reboot your phone.
PS: If your having a hard time trying to detect your phone on your pc, don't connect your phone yet. Click the "download" button on SP Flashtool first and then connect your phone. Press all 3 buttons (Vol+, Vol-, Power button) until your pc detects your phone and SP Flashtool will automatically flash your device.
5. DONE!
Tell me if it works or not so that I can try to help each and every one of you. Cheers!
HEllo could help my on teamviewer?
seser111 said:
HEllo could help my on teamviewer?
Click to expand...
Click to collapse
Hi! Could you tell me how you bricked your phone? is it soft bricked or hard bricked?
djgilquirino said:
Hi! Could you tell me how you bricked your phone? is it soft bricked or hard bricked?
Click to expand...
Click to collapse
It's hard bricked. I tried sp flash tool it requires authorized account.
djgilquirino said:
Redmi Note 8 Pro Global 128gb 6gb
Here's my story,
I was using Android 10 with TWRP before and then I bricked my phone by installing some magisk module and was stuck in bootloop. I was going to re-flash A10 global fastboot rom but I accidentally installed A9 instead and thus, my phone was hard bricked. Dead screen and only led notification light is on.
Here are the steps on how to unbrick your phone. (Not 100% sure if it works but we've got nothing to lose since our phone is already hard bricked.)
1. Try to install any A9 stock rom on your phone through "flash_all.bat" inside your A9 stock rom and wait for it to finish or at least long enough when you feel like it's stuck. (
)
You can download stock roms here (https://mirom.ezbox.idv.tw/en/phone/begonia/)
2. Assuming you have installed most of A9 stock rom including preloader, try to flash "preloader_begonia.bin" and "lk.img" found here (https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527) and follow instructions on how to flash both files.
3. Download and install MiFlash Pro (https://mega.nz/folder/xZtzjRQI#p24N5i5Xi1S_KXPGK4Hk4w)
4. (https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/) Follow this tutorial starting from step 3 and wait for around 5 mins until "Download OK" shows up and then reboot your phone.
PS: If your having a hard time trying to detect your phone on your pc, don't connect your phone yet. Click the "download" button on SP Flashtool first and then connect your phone. Press all 3 buttons (Vol+, Vol-, Power button) until your pc detects your phone and SP Flashtool will automatically flash your device.
5. DONE!
Tell me if it works or not so that I can try to help each and every one of you. Cheers!
Click to expand...
Click to collapse
How can you even brick if you rollback to older Android version accidentally via fastboot ? This phone doesn't even have ARB
Anyway, it's possible to unbrick since you able to flash factory preloader and lk
TheMalachite said:
How can you even brick if you rollback to older Android version accidentally via fastboot ? This phone doesn't even have ARB
Anyway, it's possible to unbrick since you able to flash factory preloader and lk
Click to expand...
Click to collapse
That's the problem. I didn't know why I bricked my phone while flashing A9. It just didn't boot after rebooting my phone. I think as long as you flashed A9, you can proceed to flash the preloader and lk and unbrick it.
Same pproblem
djgilquirino said:
Redmi Note 8 Pro Global 128gb 6gb
Here's my story,
I was using Android 10 with TWRP before and then I bricked my phone by installing some magisk module and was stuck in bootloop. I was going to re-flash A10 global fastboot rom but I accidentally installed A9 instead and thus, my phone was hard bricked. Dead screen and only led notification light is on.
Here are the steps on how to unbrick your phone. (Not 100% sure if it works but we've got nothing to lose since our phone is already hard bricked.)
1. Try to install any A9 stock rom on your phone through "flash_all.bat" inside your A9 stock rom and wait for it to finish or at least long enough when you feel like it's stuck. (https://www.youtube.com/watch?v=cn5F12ixLB8)
You can download stock roms here (https://mirom.ezbox.idv.tw/en/phone/begonia/)
2. Assuming you have installed most of A9 stock rom including preloader, try to flash "preloader_begonia.bin" and "lk.img" found here (https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527) and follow instructions on how to flash both files.
3. Download and install MiFlash Pro (https://mega.nz/folder/xZtzjRQI#p24N5i5Xi1S_KXPGK4Hk4w)
4. (https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/) Follow this tutorial starting from step 3 and wait for around 5 mins until "Download OK" shows up and then reboot your phone.
PS: If your having a hard time trying to detect your phone on your pc, don't connect your phone yet. Click the "download" button on SP Flashtool first and then connect your phone. Press all 3 buttons (Vol+, Vol-, Power button) until your pc detects your phone and SP Flashtool will automatically flash your device.
5. DONE!
Tell me if it works or not so that I can try to help each and every one of you. Cheers!
Click to expand...
Click to collapse
I have same problem like you. How did you flash when your RM8P is hard brick? I try same things like youtube, but my cmd windows just close immediately. And if I move fastboot tool in the rom folder, cmd window didn't close but doing nothing. How did you do that?
My RN8P don't have recovery or fastboot.
thanks
thank you very much, my phone is resurrected. ?❤
OP's phone was softbricked(as they still had access to fastboot) and is now claiming that a preemptive measure can unbrick a hardbricked phone
Benedict Cumberbatch said:
OP's phone was softbricked(as they still had access to fastboot) and is now claiming that a preemptive measure can unbrick a hardbricked phone
Click to expand...
Click to collapse
Well I pointed out that it was just a possible way and not an absolute way on unbricking my phone. And I guess you're right about my phone being softbricked and I apologize for that mistake. Cheers
djgilquirino said:
Redmi Note 8 Pro Global 128gb 6gb
Here's my story,
I was using Android 10 with TWRP before and then I bricked my phone by installing some magisk module and was stuck in bootloop. I was going to re-flash A10 global fastboot rom but I accidentally installed A9 instead and thus, my phone was hard bricked. Dead screen and only led notification light is on.
Here are the steps on how to unbrick your phone. (Not 100% sure if it works but we've got nothing to lose since our phone is already hard bricked.)
1. Try to install any A9 stock rom on your phone through "flash_all.bat" inside your A9 stock rom and wait for it to finish or at least long enough when you feel like it's stuck. (https://www.youtube.com/watch?v=cn5F12ixLB8)
You can download stock roms here (https://mirom.ezbox.idv.tw/en/phone/begonia/)
2. Assuming you have installed most of A9 stock rom including preloader, try to flash "preloader_begonia.bin" and "lk.img" found here (https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527) and follow instructions on how to flash both files.
3. Download and install MiFlash Pro (https://mega.nz/folder/xZtzjRQI#p24N5i5Xi1S_KXPGK4Hk4w)
4. (https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/) Follow this tutorial starting from step 3 and wait for around 5 mins until "Download OK" shows up and then reboot your phone.
PS: If your having a hard time trying to detect your phone on your pc, don't connect your phone yet. Click the "download" button on SP Flashtool first and then connect your phone. Press all 3 buttons (Vol+, Vol-, Power button) until your pc detects your phone and SP Flashtool will automatically flash your device.
5. DONE!
Tell me if it works or not so that I can try to help each and every one of you. Cheers!
Click to expand...
Click to collapse
In soft bricks, you can access recovery or fastboot or both, and easily flash the stock ROM, but you have mentioned above that your phone was hard bricked, there is almost no way to unbrick a hard bricked RN8P without authorized account, even if you do, its very likely it was once in a million chance that it got flashed, best way to recover a hard bricked RN8P is to not mess it up more and take it to service center right away.
Help please!!
I'm Stuck.. idk what it is.
I flashed my RN8 with Google PE using TWRP. But now I'm stuck in some sort of boot-loop where I'm neither able to access Recovery menu nor the Fast-boot page.
Help me too somehow.
Thanks if you could respond. :crying::crying:
---------- Post added at 12:50 PM ---------- Previous post was at 12:37 PM ----------
I'm Stuck.. idk what it is.
I flashed my RN8 with Google PE using TWRP. But now I'm stuck in some sort of boot-loop where I'm neither able to access Recovery menu nor the Fast-boot page.
Help me too somehow.
Thanks if you could respond
there are ways to unlock the RN8Pro, even after a hard brick. Either you buy the UFI Box and do it yourself (180 €) or you call someone who does it using the team viewer, the call was cheaper and more successful for me. I would love to share the phone number with you guys, but I think the moderators will mind ?!
there are ways to unlock the RN8Pro, even after a hard brick. Either you buy the UFI Box and do it yourself (180 €) or you call someone who does it using the team viewer, the call was cheaper and more successful for me. I would love to share the phone number with you guys, but I think the moderators will mind ?!
Hey, my redmi 4a is soft bricked, please guide me how to fix it. I'm like a noob, so i need A to Z guide
Hey my
djgilquirino said:
Redmi Note 8 Pro Global 128gb 6gb
Here's my story,
I was using Android 10 with TWRP before and then I bricked my phone by installing some magisk module and was stuck in bootloop. I was going to re-flash A10 global fastboot rom but I accidentally installed A9 instead and thus, my phone was hard bricked. Dead screen and only led notification light is on.
Here are the steps on how to unbrick your phone. (Not 100% sure if it works but we've got nothing to lose since our phone is already hard bricked.)
1. Try to install any A9 stock rom on your phone through "flash_all.bat" inside your A9 stock rom and wait for it to finish or at least long enough when you feel like it's stuck. (
)
You can download stock roms here (https://mirom.ezbox.idv.tw/en/phone/begonia/)
2. Assuming you have installed most of A9 stock rom including preloader, try to flash "preloader_begonia.bin" and "lk.img" found here (https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527) and follow instructions on how to flash both files.
3. Download and install MiFlash Pro (https://mega.nz/folder/xZtzjRQI#p24N5i5Xi1S_KXPGK4Hk4w)
4. (https://www.cyanogenmods.org/forums/topic/how-to-unbrick-redmi-note-8-pro/) Follow this tutorial starting from step 3 and wait for around 5 mins until "Download OK" shows up and then reboot your phone.
PS: If your having a hard time trying to detect your phone on your pc, don't connect your phone yet. Click the "download" button on SP Flashtool first and then connect your phone. Press all 3 buttons (Vol+, Vol-, Power button) until your pc detects your phone and SP Flashtool will automatically flash your device.
5. DONE!
Tell me if it works or not so that I can try to help each and every one of you. Cheers!
Click to expand...
Click to collapse
Hey, my redmi 4a is soft brick,
Can you guide me from beginning?
megaros said:
there are ways to unlock the RN8Pro, even after a hard brick. Either you buy the UFI Box and do it yourself (180 €) or you call someone who does it using the team viewer, the call was cheaper and more successful for me. I would love to share the phone number with you guys, but I think the moderators will mind ?!
Click to expand...
Click to collapse
Would you be so kind as to maybe PM that # to me? Ive been trying to get mine unbricked for probably over a year now and havent had any luck even finding a place or person to do the unlock.... I would really appreciate it...
U mnie zadziałał ten sposób
.
namurnik said:
U mnie zadziałał ten sposób
.
Click to expand...
Click to collapse
No widze ze dobrze to wyglada , powiedz mi tylko czy miales naprawde HARDBRICK , czy tylko SOFTBRICK , ?
Well I see it looks good, just tell me if you had a really HARDBRICK or just a SOFTBRICK?
by mistake i flashed old firmware by twrp has anti role back and brick my mi max 3 6g-ram 128-storage andwhen connect topc make sound and read 9008 qualcom but when flash by flash tool give me edl authnticaion
fordfujn said:
by mistake i flashed old firmware by twrp has anti role back and brick my mi max 3 6g-ram 128-storage andwhen connect topc make sound and read 9008 qualcom but when flash by flash tool give me edl authnticaion
Click to expand...
Click to collapse
You can access to recovery or fastboot ?
You need to flash with a firehose (ELF) file without authentication and touching the Test Point found when unmounting the mobile. If you do not do the Test Point, it will continue to take the authentication (I say it because it happened to me)
Hi there,
I recently bricked my Redmi Note 9 Pro trying to reflash the original rom under TWRP. It was a Global version (joyeuse) originally.
It simply is stuck on a bootloop (Redmi logo showing up for 1sec then rebooting) so can't access fastboot or recovery mode.
After many hours of research, I kinda came to the conclusion that there is no way of flashing the rom in EDL mode without an authorized MI account for MI Flash Tool.
I'm still asking though : is there any trick to bypass it or flash the original rom without using an authorized account on a Qualcomm-based device ?
Cheers !
AkilisUi said:
Hi there,
I recently bricked my Redmi Note 9 Pro trying to reflash the original rom under TWRP. It was a Global version (joyeuse) originally.
It simply is stuck on a bootloop (Redmi logo showing up for 1sec then rebooting) so can't access fastboot or recovery mode.
After many hours of research, I kinda came to the conclusion that there is no way of flashing the rom in EDL mode without an authorized MI account for MI Flash Tool.
I'm still asking though : is there any trick to bypass it or flash the original rom without using an authorized account on a Qualcomm-based device ?
Cheers !
Click to expand...
Click to collapse
There's no trick and it cannot be unbrick as of now even mi service center can't flash fw through edl. Your only option are: 1.)Mi Service Center (they'll replace the board it'll cost you $120 USD like you bought a second hand of the same unit). 2.) Sell the parts to make profit and buy a new phone. 3.) Set aside and wait for available unbrick solution. You cannot avail services from indian and russian guys almost all their services are scam. That's all you can do and I can share.
Facing s similar issue. Looking forward to a solution..
I'm able to access both recovery and fastboot. Only issue is that i accidentally locked the bootloader while tinkering with it on mi flash unlock.
Apparently accessing EDL mode is the only way to get past this (based on hours of extensive google research, lol).
As of now I couldn't find any solution.
In my theory it can be unbrick in two methods:
1st method is bypassing authentication (server hack or modified mi flashtool).
2nd method is modified firehose programmer file.
We can use other flashtool programs like (Xiaomi Fire Tool, Chimera, and other paid apps to flash) but we need a modified firehose for that.
If someone else has the solution please help us unbrick our phones. May be we can donate instead of buying from someone else we don't even trust and letting them access our computer that's too risky.
Moreover, I asked xiaomi support, In our case they won't help us for them our bricked phones are trash. We are helpless.
In case someone has time to help patch these files for us. I got these files from latest firmware: (Joyeuse Global). I will donate my money instead of availing service.
Firmware:
joyeuse_global_images_V13.0.1.0.SJZMIXM_20220804.0000.00_12.0_global
Source:
https://c.mi.com/global/miuidownload/detail/guide/global/miuidownload/index
Hello, I have my redmi note 9 pro (joyeuse) working again. After days of deep searching in the web for fix I almost got out of my mind.
If you have no other choice you can pay someone for authorized flash just make sure your phone can enter into edl mode stably. I was very skeptical and have trust issues but my only choice is: give it a try.
AkilisUi said:
Hi there,
I recently bricked my Redmi Note 9 Pro trying to reflash the original rom under TWRP. It was a Global version (joyeuse) originally.
It simply is stuck on a bootloop (Redmi logo showing up for 1sec then rebooting) so can't access fastboot or recovery mode.
After many hours of research, I kinda came to the conclusion that there is no way of flashing the rom in EDL mode without an authorized MI account for MI Flash Tool.
I'm still asking though : is there any trick to bypass it or flash the original rom without using an authorized account on a Qualcomm-based device ?
Cheers !
Click to expand...
Click to collapse
Hi, have you tried holding lower volume button and power button at the same time, that will make the phone go to fastboot mode. After that download XiaomiAdbFastbootTools and open it. It should automatically point you to Fastboot tab. In Fastboot tab under Image: 1. select ROM folder( oh forgot to mention to download FASTBOOT image for your phone's model before this) and for method put clean install and then just click on flash ROM and done.
Good luck from someone who has bricked a phone like you for at least 20 times lmao
Mumi32 said:
Hi, have you tried holding lower volume button and power button at the same time, that will make the phone go to fastboot mode. After that download XiaomiAdbFastbootTools and open it. It should automatically point you to Fastboot tab. In Fastboot tab under Image: 1. select ROM folder( oh forgot to mention to download FASTBOOT image for your phone's model before this) and for method put clean install and then just click on flash ROM and done.
Good luck from someone who has bricked a phone like you for at least 20 times lmao
Click to expand...
Click to collapse
Hey,
My phone is hard bricked, meaning that I don't have access to fastboot or recovery anymore. My only option was getting rid of the back cover, unplug the battery and short-circuit the pins with a pair of tweezers to access edl mode (which I did), then install the original rom with an authorized account (don't have + cannot find) or bypass the authorization or mayber with a modified firehose (I tried to find one, but didn't succeed as mentionned by gfchhhh earlier).
So I my brother gave me a spare phone that will clompetely do (redmi note 10 pro actually) !
Thanks for your time tho !
This happened to me in 2020 when I bought the phone after the release and I tried to install the Curtana ROM on a Joyeuse device, so I bricked the phone by mistake!
Thankfully, I found some shady Telegram group with people that offered EDL service from India (I think...) with official MI Flash tool from authorized service provider (supposedly they were the owners of the account). At first, I was skeptical and I tried different ways to service the phone, but couldn't find any so I delved into the shady realm of a remote service provider.
From my experience, the dude in question that offered the service seemed very rude because he probably didn't speak English very well. I paid him 30€ through PayPal beforehand, which I know it was a risky move. We agreed on a date to fix the phone remotely, but he wasn't punctual and I had to wait a couple of days for him to respond.
He connected via TeamViewer, he asked to download the MI Flash Tool (I don't remember the name fully), and asked me to put the phone in EDL with a paperclip or tweezers. Then I remember him logging in his Mi service account, sending a repair request (i think), and after a couple of minutes, he copied and pasted what looked to be a very long 2FA single use code (two factor authentication) to begin the flashing.
The process took about 30~60 min or so, of which I didn't remove my eyes from the computer at any moment to check if he was going to do pesky things through the remote access. After the long wait, the phone booted and I got my phone working.
I have never again tried to root the phone until today, because I have a severe problem with the audio interface and I need to modify some system files.
Wish me luck!