Develop Bugs

Q about 6GB 128GB version

Is the 6GB 128GB version exclusive to China?
All the Xiaomi websites that started revealing the Mi MAX 3 on their front page (which should be the international version) list the phone's spec with 4GB 64GB only.
If it's China exclusive will we be able to install the Global ROM when officially released on it as it will be specific to the 4GB 64GB version?
Thanks in advance.

samkatta said:
Is the 6GB 128GB version exclusive to China?
All the Xiaomi websites that started revealing the Mi MAX 3 on their front page (which should be the international version) list the phone's spec with 4GB 64GB only.
If it's China exclusive will we be able to install the Global ROM when officially released on it as it will be specific to the 4GB 64GB version?
Thanks in advance.
Click to expand...
Click to collapse
I have a 6/128gb model here in the U.S. - the hardware should actually be identical aside from storage sizes, and I've had no trouble flashing anything. I can't imagine there would be any reason you couldn't flash to your firmware of choice as long as your bootloader is unlocked.

Thank you very much for your reply.
However, that is the case now as there is no Global Firmware officially available, but how if when this Global Firmware was released and intended only for the 4GB 64GB it might cause problems if it was installed on the 6GB 128GB if it was going to address the phone's memory sectors differently than the 4GB 64GB memory sectors.
The main question here is: are there two different firmwares for both versions or it's only one universal firmware that is used for both versions with different memory capacity?

Same SoC, same code name, RAM and storage size doesn't mather so same firmware/rom for both...
Have you seen different roms listed for both versions anywhere?

We can actually take this a step further. Since the redmi note 5/pro has basically the same internals as the mi max 3(less USB type c, larger screen), how hard is it to modify the Note 5 pros global stable rom to accommodate the mi max 3? The only reason for not going this route is to go directly to Android 9(Pie) development. My two cents.

samkatta said:
Thank you very much for your reply.
However, that is the case now as there is no Global Firmware officially available, but how if when this Global Firmware was released and intended only for the 4GB 64GB it might cause problems if it was installed on the 6GB 128GB if it was going to address the phone's memory sectors differently than the 4GB 64GB memory sectors.
The main question here is: are there two different firmwares for both versions or it's only one universal firmware that is used for both versions with different memory capacity?
Click to expand...
Click to collapse
If the two versions of the phone were different enough to require different firmwares, then they would have different code names - signifying what firmware to use for a device is one of the functions of a code name. Since they are both simply "nitrogen," this means they should take identical firmware. I've had a lot of phones and modded them all, and spend quite a bit of time reading forums for devices I don't own but am interested in, and if the two versions take different firmwares despite having the same code name then this will be the very first time I've heard of it happening. I am 99.9% sure that both phones will take the same firmware.

Yes, 6gb/128gb is a China exclusive and won't be released globally. same goes for blue variant. Any 6/128 "global" edition is likely to be a fake rom with forced unlocked bootloader. So u guys should beware.

rathian said:
Yes, 6gb/128gb is a China exclusive and won't be released globally. same goes for blue variant. Any 6/128 "global" edition is likely to be a fake rom with forced unlocked bootloader. So u guys should beware.
Click to expand...
Click to collapse
So, the important question now, can we re-lock the bootloader on the 6GB/128GB China version after installing the official global firmware on it? because some have mentioned that the phone returns itself to unlocked state again after doing this.

rathian said:
Yes, 6gb/128gb is a China exclusive and won't be released globally. same goes for blue variant. Any 6/128 "global" edition is likely to be a fake rom with forced unlocked bootloader. So u guys should beware.
Click to expand...
Click to collapse
Could you please tell us where we can find official source or confirmation for this claim?
Thank you.

I have waited so long for the 128GB Global Version and am starting to warder if it will truly come.
Please would you advise me to buy the Global ROM or still wait for the Global version as am not sure it will Come?

Coming from a 6gb/128gb owner: just buy the damn thing if you want it.
I personally don't regret it, saved myself the wait for the bootloader unlock, and would have installed Xiaomi.eu anyway, even if I had went for the "global" version.
Last but not least: there are no modem differences between the global and chinese model, so why wait if you end up getting the same band support anyway?

MrColdbird said:
Coming from a 6gb/128gb owner: just buy the damn thing if you want it.
I personally don't regret it, saved myself the wait for the bootloader unlock, and would have installed Xiaomi.eu anyway, even if I had went for the "global" version.
Last but not least: there are no modem differences between the global and chinese model, so why wait if you end up getting the same band support anyway?
Click to expand...
Click to collapse
Agreed 100 % from a 6gb/128gb owner on 8.8.9 xiaomi.eu.

6/128 Gb Gold version here as well, on the so called unofficial unlocked 9.6.4.0 dodgy global rom. Been using it , giving it a hammering over the last couple of weeks.Fast and stable...no bugs to report.Not bothered in trying to update it.Everything seems to be doing what i want of it.

There will not be a Global Version of the 6GB/128GB variant as the phone is already available on the Xiaomi Global website and on the spec only listed is the 4GB/64GB variant.
It's all up to you to decide on which version you want, keeping in mind a couple of things:
First, no need to wait for a Global Version of the 6GB/128GB variant as it's not coming ever.
Second, there is no difference between both variants except for the memory difference (obviously) and how would you like your bootloader be locked or unlocked (with the Chinese version to stay on locked bootloader you'll have to remain on the Chinese Firmware pathway but if you want to go the EUMIUI or IMUI Global you have to unlock the bootloader, however, with the Global Version you can have the bootloader locked while you are on the official Global ROM with OTA updates working normally)

samkatta said:
There will not be a Global Version of the 6GB/128GB variant as the phone is already available on the Xiaomi Global website and on the spec only listed is the 4GB/64GB variant.
It's all up to you to decide on which version you want, keeping in mind a couple of things:
First, no need to wait for a Global Version of the 6GB/128GB variant as it's not coming ever.
Second, there is no difference between both variants except for the memory difference (obviously) and how would you like your bootloader be locked or unlocked (with the Chinese version to stay on locked bootloader you'll have to remain on the Chinese Firmware pathway but if you want to go the EUMIUI or IMUI Global you have to unlock the bootloader, however, with the Global Version you can have the bootloader locked while you are on the official Global ROM with OTA updates working normally)
Click to expand...
Click to collapse
Hi
Good day sir
Please I need to understand you properly on this, am a novice here and am sorry for the way I will put my questions as below.
If I buy the Chinese version from aliexpress 6gb/128gb,would I get regular MIUI update from xiaomi and also newer android update without any tweak on the ROM?
The thing there is am not familiar with locked and unlocked bootloader as am scared of bricking the device at any attempt.
I just want to buy and enjoy my device without any tweak on rom
Also, I do read that the Chinese version, has mix up of language when tunned to English (has English and Chinese writing). How true is it?
Please I need answers before I make an order.
Thanks

uche715 said:
Hi
Good day sir
Please I need to understand you properly on this, am a novice here and am sorry for the way I will put my questions as below.
If I buy the Chinese version from aliexpress 6gb/128gb,would I get regular MIUI update from xiaomi and also newer android update without any tweak on the ROM?
The thing there is am not familiar with locked and unlocked bootloader as am scared of bricking the device at any attempt.
I just want to buy and enjoy my device without any tweak on rom
Also, I do read that the Chinese version, has mix up of language when tunned to English (has English and Chinese writing). How true is it?
Please I need answers before I make an order.
Thanks
Click to expand...
Click to collapse
If you are not going to modify your phones' firmware and stay on the original firmware then you'll be good to go and you will get regular OTA updates from the official Xiaomi servers but keep in mind that this would be the Chinese firmware pathway all the time for you.
The Chinese firmware has English language but as you said there are some here and there mix up but it will not interfere with your daily use of the device but it's there (you'll find some naming in the menu in Chinese)
The other thing, is that the Chinese version doesn't have Google Play or any other Google services but you can install these easily from an app that is available on a Chinese app store pre-installed on the Chinese version.
So, if you are ok with all of the above you can get the 6GB/128GB version but if you are not feeling much comfortable of Chinese lettering here and there and some Chinese apps on your device then go with the 4GB/64GB version.
By the way, there will not be much difference of performance between the 2 devices (if any at all) if you are wondering about that and for the storage the device has a Micro SD slot and you can have all the storage that you want with that.

Hi,
I will try to make things more clear : ....
I have ordered and received from a known Chinese internet site
(not my first order with them)
"[Official Global ROM]Xiaomi Mi Max 3 6.9 Inch 4G LTE Smartphone Snapdragon 636 6GB 128GB 12.0MP+5.0MP Dual Rear Cameras Android 8.1 5500mAh Type-C OTG Touch ID - Black:"
Before shipping i have inquired :
" Is the "official Global Rom" genuine by Xiaomi or flashed by ********* ??? is the box original sealed or open ???"
The answer was :
"Dear friend,
Thanks for your inquiry
Sorry for the late reply
this item is Official Global ROM by xiaomi
it is packed by original sealed box
please do not worry
Hope you enjoy your shipping!
Best regards
The Phone was received relatively fast @ 9th. October very nice Mi Max 3 very responsive with "MIUI Global 9.x.x.x....."
Few days later got an OTA "UPDATE Alert" to MIUI Global 10.0.1.0 Stable (OEDMIFH)
The update performed in few minutes all looks good up to i found on the XDA site
The link to "Mi Product Authentication" :
https://www.mi.com/en/verify/#/en/tab/imei
I have clicked the IMEI and found this :
小米Max3 全网通版 6GB内存 黑色 128GB
Thank you for choosing Xiaomi!
However, the device you purchased is not an official global version and user experience may be affected. Next time, please purchase the official global version of the device through officially authorized channels.
(could not upload a pic.)
Started searching 6/128 Global found out there no such version on the market ....
Opened a dispute on Pay Pal
Waiting for Answers ......

You should never listen to a vendor regarding this information without thorough research. That's why Xiaomi implemented the new 720 hour official bootloader unlock.

mmarcus10 said:
Hi,
I will try to make things more clear : ....
I have ordered and received from a known Chinese internet site
(not my first order with them)
"[Official Global ROM]Xiaomi Mi Max 3 6.9 Inch 4G LTE Smartphone Snapdragon 636 6GB 128GB 12.0MP+5.0MP Dual Rear Cameras Android 8.1 5500mAh Type-C OTG Touch ID - Black:"
Before shipping i have inquired :
" Is the "official Global Rom" genuine by Xiaomi or flashed by ********* ??? is the box original sealed or open ???"
The answer was :
"Dear friend,
Thanks for your inquiry
Sorry for the late reply
this item is Official Global ROM by xiaomi
it is packed by original sealed box
please do not worry
Hope you enjoy your shipping!
Best regards
The Phone was received relatively fast @ 9th. October very nice Mi Max 3 very responsive with "MIUI Global 9.x.x.x....."
Few days later got an OTA "UPDATE Alert" to MIUI Global 10.0.1.0 Stable (OEDMIFH)
The update performed in few minutes all looks good up to i found on the XDA site
The link to "Mi Product Authentication" :
https://www.mi.com/en/verify/#/en/tab/imei
I have clicked the IMEI and found this :
小米Max3 全网通版 6GB内存 黑色 128GB
Thank you for choosing Xiaomi!
However, the device you purchased is not an official global version and user experience may be affected. Next time, please purchase the official global version of the device through officially authorized channels.
(could not upload a pic.)
Started searching 6/128 Global found out there no such version on the market ....
Opened a dispute on Pay Pal
Waiting for Answers ......
Click to expand...
Click to collapse
The Rom , like mine is official.The method they used was unofficial.As there is no 128gb International version phone in existence. You will always get a Chinese version 128gb phone, as seen when you check the IMEI software link. With the "Official rom" loaded by the person you purchased it from.
To do that, they had to unwrap the Chinese version phone, Install the "Official rom" and then send it to you.What they did wrong was state to you that the phone was in a sealed box.If you are concerned with having a Chinese version of the phone, i would suggest you try to return it and downgrade to the Official 64gb International version phone in a sealed box with the same software on board.
I Personally more than happy with my 128GB Chinese phone with the International Rom loaded.

I wouldn't have opened that dispute TBH.
The Chinese 6gb / 128gb model is still the best one on the market, and let's face it: you would have installed the Xiaomi.eu ROM on the "official" global version anyway, just to get theme support and rid of the ads.

Is a true international version available with working modem out of the box ??

Hi, want to buy one Mi Max 3 to use in usa tmobile !
Can somebody confirm there its a 100% true international version of the phone that has a original Xiaomi international firmware that dont have connectivity problem with bad modem.?? And that gonna receive ota updates and updating it wont brick the device ??
I'm asking because its so confusing that some people say there its not true global version (only chinese with shop rom, and fake global sticker in box)
I only want to buy if works out of the box without problem !
Dont want to have to mess with a brand new phone to try to make it work !
Please let me know, thank you

agel1 said:
Hi, want to buy one Mi Max 3 to use in usa tmobile !
Can somebody confirm there its a 100% true international version of the phone that has a original Xiaomi international firmware that dont have connectivity problem with bad modem.?? And that gonna receive ota updates and updating it wont brick the device ??
I'm asking because its so confusing that some people say there its not true global version (only chinese with shop rom, and fake global sticker in box)
I only want to buy if works out of the box without problem !
Dont want to have to mess with a brand new phone to try to make it work !
Please let me know, thank you
Click to expand...
Click to collapse
This can only apply to people who purchased the global version that has V9.6.7.0.OEDMIFD installed, as we know that 9.6.6.0 is broken

@nijel8 has received an official global Mi Max 3 (9.6.6.0 OEDMIFD) with working modem from this ebay seller:
https://www.ebay.com/itm/2023983206...il&pgrp=main:email&e=op&mchn=em&s=ci&mail=sys

panospc said:
@nijel8 has received an official global Mi Max 3 (9.6.6.0 OEDMIFD) with working modem from this ebay seller:
https://www.ebay.com/itm/2023983206...il&pgrp=main:email&e=op&mchn=em&s=ci&mail=sys
Click to expand...
Click to collapse
there isnt any working modem on 9.6.6.0.OEDMIFD
I tried the default modem, 9.6.12.0 (china modem), 8.8.30, 8.9.6, 8.9.13, 9.6.6.0 (china modem)
I tried changing the vendor partition which broke even more stuff.
Maybe @nijel8 havent checked under ground (parking lots), in door buildings, and more which make the signal so weak.
also there is no LTE/LTE+ on the 9.6.6.0.OEDMIFD
We need someone with the un-released 9.6.7.0.OEDMIFD to confirm this

omer919 said:
This can only apply to people who purchased the global version that has V9.6.7.0.OEDMIFD installed, as we know that 9.6.6.0 is broken
Click to expand...
Click to collapse
omer919 said:
there isnt any working modem on 9.6.6.0.OEDMIFD
I tried the default modem, 9.6.12.0 (china modem), 8.8.30, 8.9.6, 8.9.13, 9.6.6.0 (china modem)
I tried changing the vendor partition which broke even more stuff.
Maybe @nijel8 havent checked under ground (parking lots), in door buildings, and more which make the signal so weak.
also there is no LTE/LTE+ on the 9.6.6.0.OEDMIFD
We need someone with the un-released 9.6.7.0.OEDMIFD to confirm this
Click to expand...
Click to collapse
Don't be so sure as we don't know 9.6.6.0 is broken. You've already said 9.6.4.0 is fake and that wasn't true.
You installation of 9.6.6.0 doesn't proof anything.
We know for sure many times problems are fixed by fastboot rom nad we don't have global fastboot rom released yet to test.
Yes, I haven't tested mine enough to know for sure it runs fine under different conditions so I will not say it has no problems, we've had enough rumors spread around... So let's just leave it to people who have more to say...

I'm on 9.6.6.0 for a week now as a daily driver, no problem at all. So, afaik, 9.6.6.0 is not broken.

pecarosh said:
I'm on 9.6.6.0 for a week now as a daily driver, no problem at all. So, afaik, 9.6.6.0 is not broken.
Click to expand...
Click to collapse
This doesnt confirm anything.
I used 9.6.6.0 for a week and I had a lot of signal issues, nav keys failed a lot
I am looking forward to 9.6.7.0 but especially to 9.6.8.0 which has anti rollback so we will be able to fastboot flash it on ARB devices

Global SKU of the phone is not available yet.
I'd suggest waiting if you want modems to work properly - possibly also extra bands and NFC.

Can a phone with a metal back do NFC? Just asking...
mudnightoil said:
I'd suggest waiting if you want modems to work properly - possibly also extra bands and NFC.
Click to expand...
Click to collapse

mudnightoil said:
Global SKU of the phone is not available yet.
I'd suggest waiting if you want modems to work properly - possibly also extra bands and NFC.
Click to expand...
Click to collapse
I'm not sure if you are aware what are you actually using. The phone does not have NFC. https://www.gsmarena.com/xiaomi_mi_max_3-8963.php That is one of its weak point.
You cannot enable something by software if the hardware is missing.

McNoob said:
Can a phone with a metal back do NFC? Just asking...
Click to expand...
Click to collapse
Yes.
shadow78 said:
I'm not sure if you are aware what are you actually using. The phone does not have NFC. https://www.gsmarena.com/xiaomi_mi_max_3-8963.php That is one of its weak point.
You cannot enable something by software if the hardware is missing.
Click to expand...
Click to collapse
I'm aware the version currently doesn't, and of course it can't be enabled without the hardware.
However, I was told by a retailer (who are selling 'global' units) that the true global version was not available yet, would be a distinct hardware version, and that it may carry both extra bands and NFC.
"I'm not sure if you aware" that other global versions of Chinese phones have added both an NFC reader and additional bands? It is not unlikely in this case.
I had asked them about the likelihood of a Max 3 Pro coming soon (and with NFC) as Malyasian / Indian e-tailers had re-added pre-orders for the Pro, with October expected date. They said they didn't know, but gave the above information about the global Max 3.

mudnightoil said:
Yes.
I'm aware the version currently doesn't, and of course it can't be enabled without the hardware.
However, I was told by a retailer (who are selling 'global' units) that the true global version was not available yet, would be a distinct hardware version, and that it may carry both extra bands and NFC.
"I'm not sure if you aware" that other global versions of Chinese phones have added both an NFC reader and additional bands? It is not unlikely in this case.
I had asked them about the likelihood of a Max 3 Pro coming soon (and with NFC) as Malyasian / Indian e-tailers had re-added pre-orders for the Pro, with October expected date. They said they didn't know, but gave the above information about the global Max 3.
Click to expand...
Click to collapse
Well I did read about the device quite a bit but I haven't seen anywhere the global version would have NFC. I doubt Xiaomi would change the hardware in the global version. M3Pro on the other hand as you say may come with that but its up in the air yet...

It's rare that Chinese brands release any information ahead of availability of global SKUs, even if the hardware differs (which it not infrequently does).
We'll see.
The Max 3 is apparently among those devices that'll be officially available in European markets .. that makes it a lot more likely that bands and NFC will be added, as there have been in other phones.

I didn't think that there was any difference between the original Chinese variant and the International/Global variant which they began selling in Hong Kong, Singapore and the Philippines last week, but I was wrong. My Chinese Mi Max 3 arrived from tradingshenzhen with an unlocked bootloader and xiaomi.eu flashed as I had requested, and with xiaomi.eu 8.8.9 it works great. But a friend recently came home with a Max 3 purchased in the Philippines which is running v9.6.7.0.OEDMIFD (Global). When he goes to the Mi verification web site and enters his IMEI it says "you have a valid International Version". When I go to the site and enter my IMEI it says "you do not have a valid International Version and may encounter difficulties - please purchase from official distribution channels in the future".

panospc said:
@nijel8 has received an official global Mi Max 3 (9.6.6.0 OEDMIFD) with working modem from this ebay seller:
https://www.ebay.com/itm/2023983206...il&pgrp=main:email&e=op&mchn=em&s=ci&mail=sys
Click to expand...
Click to collapse
thanks for the reply, so it comes down to luck, hit or miss with 9.6.6.0 and i'm better off waiting for xiaomi to put a fixed version in the official rom website ? (As of now no official firmware to download there for this device !)

omer919 said:
This doesnt confirm anything.
I used 9.6.6.0 for a week and I had a lot of signal issues, nav keys failed a lot
I am looking forward to 9.6.7.0 but especially to 9.6.8.0 which has anti rollback so we will be able to fastboot flash it on ARB devices
Click to expand...
Click to collapse
Ok, I am getting irritated by you already...
Don't give your opinion on something you don't completely understand. As I said your installation procedure is so lame I don't even know how to say it without offending you. Believe me that is not my intention...
First you don't have global version and the OP question is specifically for that one.
Second you don't have fastboot global rom to begin with. There are so much more to the rom than what is it in the recovery zip. Otherwise Xiaomi won't be releasing both.
Third how do you know if Xiaomi didn't place some restrictions preventing Chinese devices running Global rom properly hence your problems...
So until you flash fastboot Global rom or better yet for this OP get global version try to not spread false information.
Peace...

No official yet?
agel1 said:
thanks for the reply, so it comes down to luck, hit or miss with 9.6.6.0 and i'm better off waiting for xiaomi to put a fixed version in the official rom website ? (As of now no official firmware to download there for this device !)
Click to expand...
Click to collapse
I have this and this has no problem with calls and data. Is this not official?

Can't get more official than this...
LTE? In what part of the world?

nijel8 said:
Can't get more official than this...
LTE? In what part of the world?
Click to expand...
Click to collapse
Manila, Philippines
Although it displays as 4g+ instead of LTE.

Do most people here also want to use it with t mobile? I'm in the same situation as OP. Curious about this on att and t mobile and don't want to mess with it much right out of the box

Can I Install Global Version L29 on Chinese Version?

Hi guys,
I'm thinking about buying a chinese version of the mate 20x for cheap, much cheaper than the global version. Was wondering if its possible to buy it and then install the L29 global rom. Is this possible? If so how?
.

Not sure if possible, but i dont recommend to change the original rom.

Appreciate the reply. But since youre not sure, does anyone know if its still possible to do this?

From what I understand (reading this forum), this requires unlocked bootloader and root.

joarce said:
From what I understand (reading this forum), this requires unlocked bootloader and root.
Click to expand...
Click to collapse
Hi.. thanks for the reply. How do I unlock the bootloader?
.

Buy Chinese version with global rom. It raises price just about 35 to 50 dollars.
My suggestion

ivanox1972 said:
Buy Chinese version with global rom. It raises price just about 35 to 50 dollars.
My suggestion
Click to expand...
Click to collapse
But thats the problem I want to avoid. I want to buy the chinese version without having to pay for the global rom so that i can install the global rom myself.

I will save you some trouble. I made the mistake of buying the Chinese version because I assumed the bootloader could be unlocked and the phone could be flashed. The answer to your question is, "no - you cannot root or flash the Mate 20 X as at this time".
Huawei has locked all bootloaders for all their devices and are no longer offering unlock codes. I have been unsuccessful in unlocking my EVR-AL00.
There are a few threads in this forum and there are developers looking for a workaround but there are none at this time.

I wanted to post a quick follow-up on my previous post. The Mate 20 X Chinese version is the first non-root phone I have owned in more than 10+ years. I will say, unlike my Samsung and OnePlus phones I have not found a need for root beyond changing the default launcher. The phone is customized so you can manage DPI settings (in and outside developer mode), auto launch/keep apps running in the background and even includes a good equalizer. If you have any specific questions about the Chinese model of the EVR-AL00 then feel free to PM me. I'm happy to try answering questions.

dogatemycomputer said:
I. The answer to your question is, "no - you cannot root or flash the Mate 20 X as at this time".
Huawei has locked all bootloaders for all their devices and are no longer offering unlock codes. I have been unsuccessful in unlocking my EVR-AL00.
Click to expand...
Click to collapse
Hi dogatemycomputer,
Appreciate the heads up. But regarding rooting the mate 20x, there are threads here that show that you can root it and flash twrp. Am I missing something?
.

Yes.
Regarding XDA’s stance on Huawei’s decision to stop bootloader unlocking
Back in April, Huawei’s form to request a bootloader unlock code mysteriously disappeared. Late May, the form returned but with a warning that the service would no longer work after 60 days. As promised, Huawei’s form is no longer available, meaning it’s no longer possible to unlock the bootloader of Huawei or Honor devices. This has obviously been disappointing to many users on our forums, but it’s been especially disappointing for us, the XDA Portal team.
https://www.xda-developers.com/xda-huawei-decision-stop-bootloader-unlocking/amp/
Basically you could unlock the bootloader until May when Huewei decided you could no longer.

deloj said:
Hi dogatemycomputer,
Appreciate the heads up. But regarding rooting the mate 20x, there are threads here that show that you can root it and flash twrp. Am I missing something?
.
Click to expand...
Click to collapse
If you truly had read and understood threads about this, you'd know that unlocking the bootloader is no longer possible. Huawei shut this down, unfortunately.
I researched this before purchasing, as I too wanted the least expensive version which allowed changing the default launcher. The only solution at this point is a new L29, or a used AL00 that has root. Shame that if we want to change the launcher we're limited to the 6/128 version.

joarce said:
If you truly had read and understood threads about this, you'd know that unlocking the bootloader is no longer possible. Huawei shut this down, unfortunately.
Click to expand...
Click to collapse
Well i didnt. Sue me.
I researched this before purchasing, as I too wanted the least expensive version which allowed changing the default launcher. The only solution at this point is a new L29, or a used AL00 that has root. Shame that if we want to change the launcher we're limited to the 6/128 version.
Click to expand...
Click to collapse
So whats the difference between the L29 and AL00 for someone to use in USA? And did you by chance install Emui 10 beta? If so let me know what you think of it.
.

deloj said:
So whats the difference between the L29 and AL00 for someone to use in USA? And did you by chance install Emui 10 beta? If so let me know what you think of it.
Click to expand...
Click to collapse
1. Broken Google Location History & Sharing
2. No access to EMUI 10 beta

I use the Chinese version and there are some minor differences between the Global and Chinese version but the Chinese version has worked well for me.
Some Google services do not work. The two I have found are OK GOOGLE (always listening) and location sharing via Google Maps.
Outside of these 2 limitations I have not found a difference between the stock Chinese and Global versions. I have been very happy with my Mate 20 X and I have not found a reason to root the phone.

dogatemycomputer said:
I use the Chinese version and there are some minor differences between the Global and Chinese version but the Chinese version has worked well for me.
Some Google services do not work. The two I have found are OK GOOGLE (always listening) and location sharing via Google Maps.
Outside of these 2 limitations I have not found a difference between the stock Chinese and Global versions. I have been very happy with my Mate 20 X and I have not found a reason to root the phone.
Click to expand...
Click to collapse
Thanks for your input. I think rooting may be overrated unless you install roms. But even then most roms have issues which convinces me personally to stick with stock.
.

I have no issues with Ok Google or location sharing via Google Maps. My AL00 is on Emui 10.0 & works perfectly, i’m in Europe btw. Of course, the big difference is when factory restoring must install manually the google apps like Play Store, Maps, Google Photos, Chrome, and so on. Otherwise i see no difference between global and chinese version.

solution chinese to global rom
for all those looking for solution to change firmware from Chinese to global, search on Facebook for ministryofsolutions. he can donthe job at minimum costs. had mine changed today, very happy.

I also can.

oslo83 said:
I also can.
Click to expand...
Click to collapse
Can you change my Huawei mate Xs from Chinese to global? I'd pay you if you can do it

Question Flashing ROM on Fold 3 - chinese to australian

One of our Chineese suppliers has gifted me a New Fold 3. The issue is the stock Chinese Rom, or rather the restrictions that come with it (nerfing most google based services, and apps i use all the time.). The device is great but restrictions applied give you a feeling of a second class android user, with core sevices absent: Play store, youtube, gmail, maps, chrome, android auto., can't even apporve family link download requests from kids. etc. etc.
I have made the choice i would rather go back to my S21 if i can't resovle this issue, as phone is useless like this.
Advice required on Loading Australian Rom via odin.
The phone model is: SM-F9260 which only seems to have overseas Rom available for download. Can i successfully load a ROM made for model SM-F926B (Australian) on a SM-F9260?
All the how to guides specifically say jou must select the same model number, and i don't want a brick it. Will have mud on my face next time i see the supplier if i have bricked their gift to me.
Any feedback/advice from users with more experience with odin and flashing would be appreciated.

Both are on Snapdragon CPU so shouldn't be any problem to flash it with PIT over the Odin.
But I never done it so I can't give you 100% answer.

streinhardt said:
One of our Chineese suppliers has gifted me a New Fold 3. The issue is the stock Chinese Rom, or rather the restrictions that come with it (nerfing most google based services, and apps i use all the time.). The device is great but restrictions applied give you a feeling of a second class android user, with core sevices absent: Play store, youtube, gmail, maps, chrome, android auto., can't even apporve family link download requests from kids. etc. etc.
I have made the choice i would rather go back to my S21 if i can't resovle this issue, as phone is useless like this.
Advice required on Loading Australian Rom via odin.
The phone model is: SM-F9260 which only seems to have overseas Rom available for download. Can i successfully load a ROM made for model SM-F926B (Australian) on a SM-F9260?
All the how to guides specifically say jou must select the same model number, and i don't want a brick it. Will have mud on my face next time i see the supplier if i have bricked their gift to me.
Any feedback/advice from users with more experience with odin and flashing would be appreciated.
Click to expand...
Click to collapse
Update: The AU version gave me an Auth Failed in Odin. Chances i could have resovled by unlocking the Bootloader which i didn't want to risk tripping the e-fuse. I ended up just using the Taiwan version which had the identical model number, and falls in the same region as China. Odin flashed without complaint. The taiwan version has no restrictions on google services, and once you set the language its hard to tell it from a regular AU one; unless you know what you are looking for that is.

streinhardt said:
Update: The AU version gave me an Auth Failed in Odin. Chances i could have resovled by unlocking the Bootloader which i didn't want to risk tripping the e-fuse. I ended up just using the Taiwan version which had the identical model number, and falls in the same region as China. Odin falshed without complaint. The taiwan version has no restritions on google services, and once you set the language its hard to tell it from a regular AU one; unless you know what you are looking for that is.
Click to expand...
Click to collapse
it's unfortunate currently there is no solution to flash variant

jemfalor said:
it's unfortunate currently there is no solution to flash variant
Click to expand...
Click to collapse
Technically there are ways, just it is very grey as to when/how you trip the e-fuse. Some say if you simply unlock the bootloader and restart, others say when you load a bootloader that doesn't match model numbers, or is older than your current, or isn't offical samsung one. I personally don't know exactly. I do however know that i didn't trip the e-fuse when i loaded the taiwan version, and i didn't have to unlock the bootloader in developer options to achevie this.

streinhardt said:
Technically there are ways, just it is very grey as to when/how you trip the e-fuse. Some say if you simply unlock the bootloader and restart, others say when you load a bootloader that doesn't match model numbers, or is older than your current, or isn't offical samsung one. I personally don't know exactly. I do however know that i didn't trip the e-fuse when i loaded the taiwan version, and i didn't have to unlock the bootloader in developer options to achevie this.
Click to expand...
Click to collapse
nope. I've tried. unlocked bootloader still won't allow you to flash variant

jemfalor said:
nope. I've tried. unlocked bootloader still won't allow you to flash variant
Click to expand...
Click to collapse
oh. Good to know. Just wondering..Did you trip your e-fuse? If so when did it happen? Did you try extracting the PIT file from the CSC and using the PIT tab in odin? with the re-parition option selected?

streinhardt said:
oh. Good to know. Just wondering..Did you trip your e-fuse? If so when did it happen? Did you try extracting the PIT file from the CSC and using the PIT tab in odin? with the re-parition option selected?
Click to expand...
Click to collapse
you won't have the chance to trip. there is some check before the boot image is integrated. so it failed showing some error, auth or secure check failed etc etc.
if you flash variant home csc you will trip

TBH, I consider the Chinese version is the best version above all other region. The dual sim is enable on Chinese version, 512GB is the only available option.
As for google service. You don't need to change the Chinese firmware to Australian to enable it, the GMS is pre-installed. All you need to do is to find a way to install the google series apps as apk by yourself, it would work just fine.

tony_peng said:
TBH, I consider the Chinese version is the best version above all other region. The dual sim is enable on Chinese version, 512GB is the only available option.
As for google service. You don't need to change the Chinese firmware to Australian to enable it, the GMS is pre-installed. All you need to do is to find a way to install the google series apps as apk by yourself, it would work just fine.
Click to expand...
Click to collapse
BTW, the only version that Chinese region Fold 3 can change is the HongKong firmware, all other regions are not available. If you use Chinese region Fold 3 in Australia, the only thing you need to concern is the Samsung Pay, but Samsung Pay is fixed by the region and cannot be changed by switching the regional firmware.

tony_peng said:
TBH, I consider the Chinese version is the best version above all other region. The dual sim is enable on Chinese version, 512GB is the only available option.
As for google service. You don't need to change the Chinese firmware to Australian to enable it, the GMS is pre-installed. All you need to do is to find a way to install the google series apps as apk by yourself, it would work just fine.
Click to expand...
Click to collapse
Each to their own, if you like the chinese version great. I hated it, restrictions in every aspect of the firmware. I personally am unsure how you rate the chinese version better, when it is loaded with restrictions and hard coded settings that can't be changed, or if they can it is really a sub par workaround. Settings that are not present in standard android builds. What exactly does it have extra that makes it better? If you like it thou that is all that matters.
I loaded the taiwan version which yes is really just the hong kong version. No restrictions, no issues. Now it works just like any other standard samsung android build, you get in AU. Yes samsung pay that use the firmware version doesn't work great, but i prefer google pay anyway. No need to stuff around with downloading apk files from third party sites, for core functions. No need to even enable developer tools.

The chinese version sounds like driving a ferrari on a go karting track.....

Can you flash the Chinese or any international dual sim version to work in the US ?

Question Imported CN version OP11 and I can't update to A07, am I screwed?

Hey guys,
Let me start by saying I'm a total noob around this whole scene. I've tried to do what research I can to try and understand how to go forward, but I could use some of your expert advice.
I imported a CN version of the OnePlus 11 (PHB110). The device has been flashed to what I believe is an NA ROM of Oxygen os 13? It says my model number is CPH2451 in settings. I am currently on version CPH2451_11_A.06.
The problem is I cannot update the phone to A07 in the settings menu. It basically shows there is an update, and then says an error (image attached). I've tried resetting the update, restarting the phone and nothing appears to help.
I've also tried to go through Oxygen updater and using the incremental build with local update, and this also doesn't work.
I read somewhere that I have to wait for the full NA OTA A.07 to be released? Is this correct, and is there any guarantee I will be able to update?
Basically I want to know if I should try and return the device or not.
Really appreciate your thoughts into this.
Cheers guys.

You have root ?
When yes flash the stock init_boot.img
after that the update should work
And the usa have only very rarely times a full firmware pack

ChrisFeiveel84 said:
You have root ?
When yes flash the stock init_boot.img
after that the update should work
Click to expand...
Click to collapse
Nah I don't have root. I've also never rooted or flashed before...
If I have to do so to make it work, then I guess I'll have to learn. Thanks mate.

Tray Oxigen updater APK
Set the Oxigen Updater to full OS

[email protected] said:
Tray Oxigen updater APK
Set the Oxigen Updater to full OS
Click to expand...
Click to collapse
full only for EU and india USA have no full pack

ChrisFeiveel84 said:
full only for EU and india USA have no full pack
Click to expand...
Click to collapse
Ok
The problem is curious.
I bought one of the first Chinese ONEPLUS 11s with OS Color. It had the Chinese block of use.
I tried everything to remove it and I didn't succeed.
I sent the phone back and I'm still fighting for the return of the money paid.
Meanwhile, I bought an OP 11 CPH2451 dual SIM. he did the update to 07 without problems.
I bought the phone in the USA on Amazon.
The problem could be from your Chinese seller who repaired/modified a blocked Chinese phone and the intervention is not happy. Let's hope it's not like that.
First of all, check the Update settings.
If they are correct, you should resume uploading.
The second solution is to try the settings for Developer Activate. The third solution is to do a full reset, activate the developer and try again.

[email protected] said:
Tray Oxigen updater APK
Set the Oxigen Updater to full
Click to expand...
Click to collapse
Yeah I've tried this. It says that I am upto date on the stable brand, but there is an update when I swap to incremental.

[email protected] said:
Ok
The problem is curious.
I bought one of the first Chinese ONEPLUS 11s with OS Color. It had the Chinese block of use.
I tried everything to remove it and I didn't succeed.
I sent the phone back and I'm still fighting for the return of the money paid.
Meanwhile, I bought an OP 11 CPH2451 dual SIM. he did the update to 07 without problems.
I bought the phone in the USA on Amazon.
The problem could be from your Chinese seller who repaired/modified a blocked Chinese phone and the intervention is not happy. Let's hope it's not like that.
First of all, check the Update settings.
If they are correct, you should resume uploading.
The second solution is to try the settings for Developer Activate. The third solution is to do a full reset, activate the developer and try again.
Click to expand...
Click to collapse
Thanks for the reply. Sorry you are still waiting for your money back.
How do I go about developer activate?

Go to Settings , About phone, find "Build nr". Tap on it 7 times. It will show that you are a developer now.
Go back to System and find "Developer Options". Do what you want in there.
Don't change what you don't know !

I have same issue, on op11 chinese version and global oxygen os preinstalled

Why do people import the chinese one? Does it do anything the US one doesn't?

whoamanwtf said:
Why do people import the chinese one? Does it do anything the US one doesn't?
Click to expand...
Click to collapse
just cheaper

josip.2608 said:
just cheaper
Click to expand...
Click to collapse
Isn't the Chinese also available with 512 gig storage??? Not sure if it's cheaper for me ATM but 512 gig isn't officially available in Canada (nor USA) for any amount of cash. I'd love to find an economical import of one were it a viable option... Not like I need it with only 60 gig used out of my 256 gig 1+7T...

wugga3 said:
Isn't the Chinese also available with 512 gig storage??? Not sure if it's cheaper for me ATM but 512 gig isn't officially available in Canada (nor USA) for any amount of cash. I'd love to find an economical import of one were it a viable option... Not like I need it with only 60 gig used out of my 256 gig 1+7T...
Click to expand...
Click to collapse
I orderd 12/256 for 650 (had some discount)

Same issue. Found any fix for this? I downloaded the CPH2451_11_A.07 (incremental) from Oxygen OS Updater then used the One Plus updater apk to locally install it but it's does not work. Really need this update because the current system is buggy.

Just to be clear with everyone here with the CN version of phone not living in China. Once the phone leaves China, it stops being a phone. Nothing can be done to fix this that is free of charge. Also includes updates too.

brystfire08 said:
Same issue. Found any fix for this? I downloaded the CPH2451_11_A.07 (incremental) from Oxygen OS Updater then used the One Plus updater apk to locally install it but it's does not work. Really need this update because the current system is buggy.
Click to expand...
Click to collapse
i think the one you trying to install would just be as buggy by design though, i haven't heard/experienced a single issue-free cos to oos conversion.

MrSteelX said:
Just to be clear with everyone here with the CN version of phone not living in China. Once the phone leaves China, it stops being a phone. Nothing can be done to fix this that is free of charge. Also includes updates too.
Click to expand...
Click to collapse
Not true. Contact CS to open a RMA request. Mail your phone to local service center to unlock. Got mine "fixed" this way. I live in Canada.
Also region lock only applies if the phone is first activated in a different region, i.e. Insert a SIM card and connect to mobile network for the first time

Did you have to spend money to ship device since it was also part of the question.
henexekrar said:
Not true. Contact CS to open a RMA request. Mail your phone to local service center to unlock. Got mine "fixed" this way. I live in Canada.
Also region lock only applies if the phone is first activated in a different region, i.e. Insert a SIM card and connect to mobile network for the first time
Click to expand...
Click to collapse

MrSteelX said:
Did you have to spend money to ship device since it was also part of the question.
Click to expand...
Click to collapse
It's free. Even if you have to pay for shipping, what other choices do you have