Hey all,
I am attempting to root my 2XL, and have so far unlocked the bootloader using ADB, however when attempting to use
fastboot boot <twrp.img>
I get stuck on < waiting for any device >
Using Deuce's flashing script, I get the following:
Checking if Fastboot exe is accessible..
Checking if Fastboot works correctly
Error! Fastboot not accessible!
Press Enter to continue...:
When attempting to update the device driver using the official Google USB Device driver inf, I get the error message
The folder you specified doesn't contain a compativle software driver for your device.
If the folder contains a driver, make sure it is designed to work with Windows for x64-based systems.
Earlier today I was able to update the device driver, and that fixed an issue I had with ADB not working, but I've hit a wall with this and there doesn't seem to be any solutions online.
Any help is greatly appreciated.
Cheers,
Boots.
How did you unlock the bootloader if fastboot isn't working?
Does the phone show up in device manager when connected and at the bootloader screen? If yes, what is the driver info?
To check if fastboot is working, run fastboot devices in the command line.
Note that USB-C ports tend to be unstable with this phone. Connect it to a USB-A port.
Related
hi everyone, i'm trying to install CM9 on my LT15i, i've tried using the CM wiki instructions and both the following guides...
androidauthority.com/xperia-arc-lt15i-root-android-4-0-ics-80265/
and
androidforums.com/rezound-all-things-root/506466-scottys-noob-friendly-root-guide-start-finish.html
the phone is already fully unlocked and has CM 7.2.0 anzu installed. i've tried simply using the clockwork recovery mod bootloader to wipe the phone and install CM 9.0.0, but on reboot the phone gets past the boot logo then just shows a black screen, so i assumed i needed to flash an appropriate ROM for CM9; this is where my problem begins.
every forum i've read about this process says i must enable usb debugging (done) and "disable fastboot" under settings>power, i do not have a "power" option in my settings and cannot find anything related to fastboot on the phone; although i'm not sure this is the problem. when android is running normally and i attempt to list devices with adb.exe on windows, it successfully returns the phone's serial number. when i shut the phone down, hold the menu button and plug in the usb cable, fastboot mode appears to work correctly as the LED comes on blue and "android adb device" appears in the windows device manager (i've tried installing the arc usb/adb drivers from various sources, they all seem to work correctly). but when i attempt to list devices after restarting in fastboot mode, adb.exe says it cannot find any device. fastboot.exe has not communicated with the device whatsoever, but i assumed i might need to get the adb.exe usb daemon/server running correctly first for this to work.
i did this process once already when i installed CM7, it was successful the first time and everything went smoothly. from what i recall i just did exactly as described above and fastboot.exe was able to find the device no problem. but that was a number of months ago, hopefully i'm just missing some obvious step.
cheers
WookieInHeat said:
every forum i've read about this process says i must enable usb debugging (done) and "disable fastboot" under settings>power, i do not have a "power" option in my settings and cannot find anything related to fastboot on the phone;
Click to expand...
Click to collapse
There is no such thing. And USB debugging is only required if you want to root stock ROM, every other action can be done without it.
WookieInHeat said:
although i'm not sure this is the problem. when android is running normally and i attempt to list devices with adb.exe on windows, it successfully returns the phone's serial number. when i shut the phone down, hold the menu button and plug in the usb cable, fastboot mode appears to work correctly as the LED comes on blue and "android adb device" appears in the windows device manager (i've tried installing the arc usb/adb drivers from various sources, they all seem to work correctly). but when i attempt to list devices after restarting in fastboot mode, adb.exe says it cannot find any device. fastboot.exe has not communicated with the device whatsoever, but i assumed i might need to get the adb.exe usb daemon/server running correctly first for this to work.
i did this process once already when i installed CM7, it was successful the first time and everything went smoothly. from what i recall i just did exactly as described above and fastboot.exe was able to find the device no problem. but that was a number of months ago, hopefully i'm just missing some obvious step.
cheers
Click to expand...
Click to collapse
Drivers, drivers, drivers.
If your phone is in fastboot mode, make sure drivers are installed. Proper drivers.
You do not need ADB server for installing a kernel.
Just open up Command Prompt and install the kernel with command
Code:
fastboot flash boot boot.img
.
Assuming boot.img is in the same folder as fastboot.exe.
Someguyfromhell said:
Drivers, drivers, drivers.
If your phone is in fastboot mode, make sure drivers are installed. Proper drivers.
Click to expand...
Click to collapse
thanks for the reply someguyfromhell. i've tried every "android adb interface" driver under the sun for the S1 fast boot device that appears in the windows device manager when i put the phone in fastboot. when i try to send any command with fastboot.exe it just hangs at "waiting for device", i've fiddled with this stuff every which way and just cannot get fastboot.exe to see the phone. i've tried switching up the usb ports on this computer, but haven't had the opportunity to try a second computer. you've let me know i'm going in the right direction at least, if i have the same results on a second machine i'll pursue the issue further.
thanks again
wookie
WookieInHeat said:
thanks for the reply someguyfromhell. i've tried every "android adb interface" driver under the sun for the S1 fast boot device that appears in the windows device manager when i put the phone in fastboot. when i try to send any command with fastboot.exe it just hangs at "waiting for device", i've fiddled with this stuff every which way and just cannot get fastboot.exe to see the phone. i've tried switching up the usb ports on this computer, but haven't had the opportunity to try a second computer. you've let me know i'm going in the right direction at least, if i have the same results on a second machine i'll pursue the issue further.
thanks again
wookie
Click to expand...
Click to collapse
You need to unlock bootloader, if you want to install CM ROM. Arc S can only have bootloader unlocked via official method, there you can also download the correct driver which you need.
http://unlockbootloader.sonymobile.com/
Someguyfromhell said:
You need to unlock bootloader, if you want to install CM ROM. Arc S can only have bootloader unlocked via official method, there you can also download the correct driver which you need.
the bootloader is already unlocked, as i said, the phone has CM7 on it currently.
Click to expand...
Click to collapse
Hi,
I am trying to unlock the boot-loader for HTC one V using the steps given on their official website
followed all the steps, but when i reach step 8: and type in
>fastboot oem get_identifier_token
It just shows waiting for devices, whereas my device is already connected. and in the FASTBOOT mode
When I type
>fastboot devices
It shows nothing (should'nt It show the device which is already connected?)
I have the Android SDK installed and copied the 3 required files from the Platform-tools folder.
ie -
adb.exe
AdbWinApi.dll
fastboot.exe
I have the USB debugging turned on,
HTC sync manager is installed and it also shows that the Driver is up-to-date.
Though, when I plug in the Phone in Fast Boot mode it shows USB device not recognized.(I am using Windows 8 Pro )
This Is the first time I am trying this
What am I doing wrong? any help would be appreciated.
TIA.
srivassumit said:
Hi,
I am trying to unlock the boot-loader for HTC one V using the steps given on their official website
followed all the steps, but when i reach step 8: and type in
>fastboot oem get_identifier_token
It just shows waiting for devices, whereas my device is already connected. and in the FASTBOOT mode
When I type
>fastboot devices
It shows nothing (should'nt It show the device which is already connected?)
I have the Android SDK installed and copied the 3 required files from the Platform-tools folder.
ie -
adb.exe
AdbWinApi.dll
fastboot.exe
I have the USB debugging turned on,
HTC sync manager is installed and it also shows that the Driver is up-to-date.
Though, when I plug in the Phone in Fast Boot mode it shows USB device not recognized.(I am using Windows 8 Pro )
This Is the first time I am trying this
What am I doing wrong? any help would be appreciated.
TIA.
Click to expand...
Click to collapse
Run the SDK Manager, do you have the Google USB Driver installed (it's under extras). I'm not 100% certain but I think you need to install that to recognize the phone in Fastboot mode.
-Duir- said:
Run the SDK Manager, do you have the Google USB Driver installed (it's under extras). I'm not 100% certain but I think you need to install that to recognize the phone in Fastboot mode.
Click to expand...
Click to collapse
Hey, Thanks for your reply, I had the Driver installed already, but there was some problem with Usb3.0 i guess
I plugged the device in Usb2.0 port and followed the steps and It worked Fine.
:good:
hey guys, I just got my OP3, I want to open the bootloader before I store some data that will be erased anyway when unlocking, I enabled USB Debugging & OEM unlocking & Advanced reboot and then I accepted the RSA Fingerprint popup. (Then, when running adb devices, I got the id of my device).
Now, I am in bootloader mode, and when running fastboot devices, I get nothing. I already installed Oneplus drivers when first connected the device.
In Device Manager under Other Devices I can see a device named "Android". When trying to install the drivers manually by browsing devices I have on my computer, I can only see "Samsung ADB Interface" and I am afraid installing this will not work when trying to unlock the bootloader. What can I do? I also have a Kali Linux Laptop if that's helping. Thanks.
Put in fastboot mode, connect to computer and manually select fastboot interface from the device manager "install device/update driver manually" box. That worked for me.
JusTeN_ said:
hey guys, I just got my OP3, I want to open the bootloader before I store some data that will be erased anyway when unlocking, I enabled USB Debugging & OEM unlocking & Advanced reboot and then I accepted the RSA Fingerprint popup. (Then, when running adb devices, I got the id of my device).
Now, I am in bootloader mode, and when running fastboot devices, I get nothing. I already installed Oneplus drivers when first connected the device.
In Device Manager under Other Devices I can see a device named "Android". When trying to install the drivers manually by browsing devices I have on my computer, I can only see "Samsung ADB Interface" and I am afraid installing this will not work when trying to unlock the bootloader. What can I do? I also have a Kali Linux Laptop if that's helping. Thanks.
Click to expand...
Click to collapse
Its fine just search for fastboot devices and see if your device comes up. Mine was showing the same thing and i continued and it worked
Tried on windows 10 and 7:
Phone is detected by ADB and commands work no problem. Boot in to fastboot (download mode) and the device isn't found when using "fastboot devices". The phone appeared in device manager with the yellow triangle but I manually updated the driver to "Android Bootloader Interface" however, I still get nothing. Am I missing something?
Thank you.
Mine never has shown in fastboot, if it shows up in device manager it should work fine. To test just try fastboot reboot.
If you corrected the issue with the driver,the problem may be with the versions of Fastboot you are using. You can download the latest Fastboot and ADB files from Google directly if you search for them it should be the first or second link.
You need google usb drivers
I have the latest google usb and platform tools on a windows 7 &10 systems using different usb ports along with multiple cables and I can not detect the phone, but I can flash.
Hi there,
strugggling to get the xa2 into fastboot mode so I can flash a new boot.img and root. I've enabled OEM unlocking and installed the USB drivers. the command 'adb reboot fastboot' doesn't work, just reboots the phone. adb over usb works fine. The official method to get into fastboot 'plug in USB whilst holding vol up/down' also doesnt allow me to get itno fastboot mode, phone just stays blank with a notification LED. I use 'fastboot devices' to see it if it connected. I've tried this on 2 PCs now to no avail
I'm thinking maybe the fastboot drivers are wrong?
Does anyone have any other suggestions or help?
Thanks
jaw2floor said:
Hi there,
strugggling to get the xa2 into fastboot mode so I can flash a new boot.img and root. I've enabled OEM unlocking and installed the USB drivers. the command 'adb reboot fastboot' doesn't work, just reboots the phone. adb over usb works fine. The official method to get into fastboot 'plug in USB whilst holding vol up/down' also doesnt allow me to get itno fastboot mode, phone just stays blank with a notification LED. I use 'fastboot devices' to see it if it connected. I've tried this on 2 PCs now to no avail
I'm thinking maybe the fastboot drivers are wrong?
Does anyone have any other suggestions or help?
Thanks
Click to expand...
Click to collapse
Hi
Install "5 seconds adb drivers"
Connect the turned off phone to PC via USB just pressing volume down button (no power) and keep pressing it until you see the LED turning green or blue.
Here u have! :highfive:
faby GT said:
Hi
Install "5 seconds adb drivers"
Connect the turned off phone to PC via USB just pressing volume down button (no power) and keep pressing it until you see the LED turning green or blue.
Here u have! :highfive:
Click to expand...
Click to collapse
Hi thanks for getting back to me,
I assume you meant the '15 second installer', which I just did just install successfully. I am still unable to see the device with 'fastboot devices' command.
Other info: I have factory reset the phone, made sure oem unlock is checked, tried the same process on another computer. I can get adb mode to work fine, but the command 'adb reboot fastboot' just reboots the phone as usual
jaw2floor said:
The official method to get into fastboot 'plug in USB whilst holding vol up/down' also doesnt allow me to get itno fastboot mode, phone just stays blank with a notification LED.
Click to expand...
Click to collapse
That is the correct behaviour.
Blue LED = Fastboot mode
Green LED = Flash mode (for reflashing stock firmware with XperiFirm in case EVERYTHING is broken)
Install these drivers:
https://adb.clockworkmod.com/
When in Fastboot mode, go to device manager, there is an Android device in there (may also be called MTP device).
In the device manager, install a new driver for that and use the ADB driver from C:\Program Files (x86)\ClockworkMod\Universal ADB Driver
Windows will tell you that it's the wrong driver. Install it anyway and Fastboot will recognize your XA2 now.
schmatzler said:
That is the correct behaviour.
Blue LED = Fastboot mode
Green LED = Flash mode (for reflashing stock firmware with XperiFirm in case EVERYTHING is broken)
Install these drivers:
https://adb.clockworkmod.com/
When in Fastboot mode, go to device manager, there is an Android device in there (may also be called MTP device).
In the device manager, install a new driver for that and use the ADB driver from C:\Program Files (x86)\ClockworkMod\Universal ADB Driver
Windows will tell you that it's the wrong driver. Install it anyway and Fastboot will recognize your XA2 now.
Click to expand...
Click to collapse
If it won't work, after that just go to devices and printers and delete Xperia XA2. It will work.
Else, after installing 15 seconds, inside device manager, update the driver of your phone (or mtp device), select local, then Android device, then fastboot. Disconnect the phone and reconnect as before (volume down)
Fastboot is VOL. UP (on this device)! (Not vol. down)
So basically turn off the device, hold Vol. UP and simply connect to USB, hold Vol. UP until LED is steady blue and you are set.
Note: VOLUME UP activates fastboot and VOLUME DOWN enables flashmode and/or recovery mode
Similar trouble here.
1. VOL UP + plug in USB: Blue led blinks once, then phone shows it's charging (turned off)
2. adb reboot bootloader: Phone just turns off
Corias said:
Similar trouble here.
1. VOL UP + plug in USB: Blue led blinks once, then phone shows it's charging (turned off)
2. adb reboot bootloader: Phone just turns off
Click to expand...
Click to collapse
I had the same issue with my XA2.
The solution (at least for me) was: different USB cable and different USB-port. As it turns out, my cable was somehow worn out (though data transfer and charging was working quite well). Going into fastboot, the blue led lit very short time and then the phone restarted. Furthermore on my PC it somehow only worked on the one USB port and not the other (both USB 3.0).
--> Maybe trying the most obvious might help also some of you
BoernMe said:
I had the same issue with my XA2.
The solution (at least for me) was: different USB cable and different USB-port. As it turns out, my cable was somehow worn out (though data transfer and charging was working quite well). Going into fastboot, the blue led lit very short time and then the phone restarted. Furthermore on my PC it somehow only worked on the one USB port and not the other (both USB 3.0).
--> Maybe trying the most obvious might help also some of you
Click to expand...
Click to collapse
Did solve this by connecting to different PC. No cable/port/hub change did help. Looks like there was some trouble with drivers (though the same PC fastboots Z3 Tablet Compact perfectly).
Same
I'm also having the same issue with my Xperia XA2 Ultra. (boy that's a mouthful)
Phone model is H3223.
Host OS is Windows 10 Pro v. 2004.
Using latest Android SDK tools (i.e. ADB and Fastboot platform tools): platform-tools_r30.0.5-windows. Got it directly from Android site.
I think I had a previous driver for Android already installed or somehow Windows got it. ADB worked, Fastboot didn't. Read online about someone on this forum getting it to work by using XZ2 driver from Sony as they evidently don't have a published driver for this device. The person who posted this solution had reported problems with this driver recently. I tried it anyway.... ADB commands work and my phone shows up when listing devices. Reboot into fastboot mode and the only thing my phone does is show a blue light indicator... no splash screen or logo. To me this means it's starting fastboot but my driver isn't working with it to recognize it as any commands for fastboot return nothing or fail. It doesn't show up under fastboot devices command.
Does anyone have a clue as to what to do?
that_random_guy said:
Same
I'm also having the same issue with my Xperia XA2 Ultra. (boy that's a mouthful)
Phone model is H3223.
Host OS is Windows 10 Pro v. 2004.
Using latest Android SDK tools (i.e. ADB and Fastboot platform tools): platform-tools_r30.0.5-windows. Got it directly from Android site.
I think I had a previous driver for Android already installed or somehow Windows got it. ADB worked, Fastboot didn't. Read online about someone on this forum getting it to work by using XZ2 driver from Sony as they evidently don't have a published driver for this device. The person who posted this solution had reported problems with this driver recently. I tried it anyway.... ADB commands work and my phone shows up when listing devices. Reboot into fastboot mode and the only thing my phone does is show a blue light indicator... no splash screen or logo. To me this means it's starting fastboot but my driver isn't working with it to recognize it as any commands for fastboot return nothing or fail. It doesn't show up under fastboot devices command.
Does anyone have a clue as to what to do?
Click to expand...
Click to collapse
I have the exact same problem, have not managed to find a solution trying with 3(!) different laptops and 2 different cables. No idea what could go wrong. I checked the device and it says that unlocking is okay. Really frustrating.
Edit: I actually found a way! Once you manage to enter the fastboot mode (light is permanently blue) go to the device manager in windows, click on the unknown android device, and install custom drivers (either by selecting from the list or by picking the universal adb driers from a local folder). These custom drivers should be adb drivers. Once they are installed, fastboot should work.
I had the same problems with my device XA2 H3113 and Win10.
My solution: Try it with Ubuntu. Just grab an 8GB usbstick, install Ubuntu via usb-installer, boot ubuntu and open a terminal
sudo apt update
sudo apt install adb fastboot
LolRoll said:
I have the exact same problem, have not managed to find a solution trying with 3(!) different laptops and 2 different cables. No idea what could go wrong. I checked the device and it says that unlocking is okay. Really frustrating.
Edit: I actually found a way! Once you manage to enter the fastboot mode (light is permanently blue) go to the device manager in windows, click on the unknown android device, and install custom drivers (either by selecting from the list or by picking the universal adb driers from a local folder). These custom drivers should be adb drivers. Once they are installed, fastboot should work.
Click to expand...
Click to collapse
Hey can you please provide me a link to the drivers? as I've been trying so many drivers and they don't work.
LolRoll said:
I have the exact same problem, have not managed to find a solution trying with 3(!) different laptops and 2 different cables. No idea what could go wrong. I checked the device and it says that unlocking is okay. Really frustrating.
Edit: I actually found a way! Once you manage to enter the fastboot mode (light is permanently blue) go to the device manager in windows, click on the unknown android device, and install custom drivers (either by selecting from the list or by picking the universal adb driers from a local folder). These custom drivers should be adb drivers. Once they are installed, fastboot should work.
Click to expand...
Click to collapse
works for me