I'm looking to build AOSP for the Red Magic 8 Pro. Has anyone managed to get the proprietary binaries from Nubia or extract it from the stock firmware?
I have tried searching around for these binaries to no avail. If someone has a download link to share I would really appreciate it. I just want a completely stock android experience and don't mind if not everything isn't working.
Do you really want AOSP or Paranoid Android will do as well? In any case, download OTA here, extract payload.bin and use payload-dumper-go. You can use LineageOS instructions for getting binaries from unpacked .omg files.
aaa.bbb111222 said:
Do you really want AOSP or Paranoid Android will do as well? In any case, download OTA here, extract payload.bin and use payload-dumper-go. You can use LineageOS instructions for getting binaries from unpacked .omg files.
Click to expand...
Click to collapse
Have they already released a ROM for this phone? If not, AOSP builds without most Google trash and I block many of their domains in the hosts file just in case. I did finally find a dump here: https://github.com/RandomPush/nubia_nx729j_dump
Appreciate your help though. I'll post my progress here in case anyone is interested. The android developer documentation says proprietary binaries are usually located in a /vendor partition. Going through the dump now and trying to figure out the bare minimum to get a custom ROM booted.
My guesses are anything Qualcomm related for the SoC. I'm unsure of what baseband/radio chips the phone uses, actually it's been pretty tough to find a good spec sheet on it. Most resources that come up on Google only refer to surface level specs and don't go into much detail on the chips themselves.
No, they haven't, but I've seen people working on it. It would be a bit easier to bring up because PA is CLO-based (not AOSP), so the probability of most stuff working is higher. CLO has some Qualcomm-specific patches. Actually, you can probably build QSSI (like GSI but from CLO) without much difficulties, so this might be the way to go.
I'd recommend that you extract those binaries from OTA anyway as they might be updated in the future. Out of the box you probably won't get working vibration.
With the kernel source released, what's so difficult with building LineageOS and stuff?
SevastianXDA said:
With the kernel source released, what's so difficult with building LineageOS and stuff?
Click to expand...
Click to collapse
We need a good unbricking method just to be on the safe side (personally, I'm not very keen on even trying someone else's build, let alone making my own, simply too much risk). Other than that, a lot of time is needed and there are basically zero good instructions. Once again, LOS isn't the best option for 8g2, would be better to go for Paranoid Android. One can theoretically build QSSI image (basically GSI, but for Snapdragons), might be a good idea for now. Still risky tho
aaa.bbb111222 said:
We need a good unbricking method just to be on the safe side (personally, I'm not very keen on even trying someone else's build, let alone making my own, simply too much risk). Other than that, a lot of time is needed and there are basically zero good instructions. Once again, LOS isn't the best option for 8g2, would be better to go for Paranoid Android. One can theoretically build QSSI image (basically GSI, but for Snapdragons), might be a good idea for now. Still risky tho
Click to expand...
Click to collapse
What are the bricking issues here? Usually even if the ROM is f*cked or just something doesn't work you can always flash back to stock through TWRP.
SevastianXDA said:
What are the bricking issues here? Usually even if the ROM is f*cked or just something doesn't work you can always flash back to stock through TWRP.
Click to expand...
Click to collapse
If only there was a fully working TWRP... Unfortunately, there isn't. Well, kind of. It boots but that's it. And no, sideload simply doesn't work. When I went back to stock on my previous device (1+7 Pro), I had to use MSM Tool. Nothing like that is available for RM8P, ZTE doesn't want to give the tools to us because of bs reasons.
aaa.bbb111222 said:
If only there was a fully working TWRP... Unfortunately, there isn't. Well, kind of. It boots but that's it. And no, sideload simply doesn't work. When I went back to stock on my previous device (1+7 Pro), I had to use MSM Tool. Nothing like that is available for RM8P, ZTE doesn't want to give the tools to us because of bs reasons.
Click to expand...
Click to collapse
Bruuuuhhh, that's stupidd, someone shall reverse engineer the MSM tool to work for the RM8P (sarcasm)
Hmm, as I can see from this post, it seems peeps have managed to actually restore the phone from a full brick..: Post
Edl or its countparts is not a necessity for buiding a custom rom. 1st, a custom rom usually just overwrite the application parts, so in the worst case the user can still restore to factory rom via fastboot commands. 2nd, many manufacturers never release their factory rescue tools (Google, ?) but there are numerous custom roms, even official builds.
Cyanide_zh said:
Edl or its countparts is not a necessity for buiding a custom rom.
Click to expand...
Click to collapse
True, it's more a convenience factor.
Cyanide_zh said:
1st, a custom rom usually just overwrite the application parts, so in the worst case the user can still restore to factory rom via fastboot commands.
Click to expand...
Click to collapse
Or not. In fact, happened to me (Qualcomm crashdump mode or something like that). And if something could go wrong, it will.
Cyanide_zh said:
2nd, many manufacturers never release their factory rescue tools (Google, ?) but there are numerous custom roms, even official builds.
Click to expand...
Click to collapse
Usually those devices have much less ROMs available if any. Just compare 1+9 Pro and 10 Pro.
aaa.bbb111222 said:
less ROMs available if any. Just compare 1+9 Pro
Click to expand...
Click to collapse
Any ROM than the stock would do, just LineageOS would be superb.
SevastianXDA said:
Hmm, as I can see from this post, it seems peeps have managed to actually restore the phone from a full brick..: Post
Click to expand...
Click to collapse
Interesting.. https://romprovider.com/nubia-red-magic-8-pro-plus-firmware-stock-rom/
SevastianXDA said:
Interesting.. https://romprovider.com/nubia-red-magic-8-pro-plus-firmware-stock-rom/
Click to expand...
Click to collapse
sadly, 9008 firmware need pay about 50 USD, But nobody said the package can be used still now.
CrazyMoney said:
sadly, 9008 firmware need pay about 50 USD, But nobody said the package can be used still now.
Click to expand...
Click to collapse
Bruh the custom ROM and modding community is so mid and goofy for the RM8P Literally one of the main things making me go for a Poco F5 instead
Chinese dev made MIUI rom but its only payed with alipay for like 3 dollars. I im waiting when we can pay with paypal to try it looks good.
ibestmoder said:
Chinese dev made MIUI rom but its only payed with alipay for like 3 dollars. I im waiting when we can pay with paypal to try it looks good.
Click to expand...
Click to collapse
Well yeah, but as explained/talked about here, AOSP/LineageOS has to be technically possible
I got the rom maybe extract and check it? Take out alipay security then we can try it
ibestmoder said:
I got the rom maybe extract and check it? Take out alipay security then we can try it
Click to expand...
Click to collapse
Maybe share the ROM file, then we can try finding some way to remove forced payment/crack it (No paid ROMs allowed in XDA forums) and maybe possibly clean it somewhat (Does it even have english as an option?) and we'll finally get ourselves a finally working alternative custom ROM.
Related
Hi,
So, cm-13 is very unlikely on our device, but i'll take a look anyway (a slow look as my time is very limited).
Here you'll find my "work" and "help requests".
First, for sure i didn't "worked" on a lot of device, but it's the first one i have with a dedicated partition to the kernel dts.
Code:
/dev/block/platform/hi_mci.0/by-name/dts /dts emmc defaults recoveryonly
+/dev/block/platform/hi_mci.0/by-name/boot /boot emmc defaults recoveryonly
+/dev/block/platform/hi_mci.0/by-name/recovery /recovery emmc defaults recoveryonly
+/dev/block/platform/hi_mci.0/by-name/misc /misc emmc defaults recoveryonly
+/dev/block/platform/hi_mci.0/by-name/modem /modem emmc defaults recoveryonly
+/dev/block/platform/hi_mci.0/by-name/modem_dsp /modem_dsp emmc defaults recoveryonly
+/dev/block/platform/hi_mci.0/by-name/sensorhub /sensorhub emmc defaults recoveryonly
- I wonder if the dts, which is kernel dependent, could be the major problem to get a custom rom version (kk, jb, mm), or even a stock huawei rom, to work from any base rom. I'll try to make some experiment soon.
- I did sync cm-13, and "of course" have cwm recovery working. But whatever i'm trying i can't get screen output on twrp 3.0. Does someone have a clue on this?
- @gabry3795 , do you still have the device ? I would be happy to get your hangout/google nickname if you have any to sometime talk about this device. @codeworkx is of course also welcome for any advice. By the way your cm12.0 github repo (codeworkx) doesn't seem's to be up to date, even if i understand that's it's in a non-working state.
Cpasjuste said:
@codeworkx is of course also welcome for any advice. By the way your cm12.0 github repo (codeworkx) doesn't seem's to be up to date, even if i understand that's it's in a non-working state.
Click to expand...
Click to collapse
You're looking at the wrong account.
https://github.com/honor6-dev
Start recovery and have a look at /tmp/recovery.log.
Hint:
https://github.com/honor6-dev/andro...common/blob/cm-12.1/BoardConfigCommon.mk#L150
https://github.com/CyanogenMod/andr...mmit/7273770a9fedff12ca80135356c52fee06c8aba0
Cpasjuste said:
- @gabry3795 , do you still have the device ? I would be happy to get your hangout/google nickname if you have any to sometime talk about this device. @codeworkx is of course also welcome for any advice. By the way your cm12.0 github repo (codeworkx) doesn't seem's to be up to date, even if i understand that's it's in a non-working state.
Click to expand...
Click to collapse
Yes, I still have this device! I'll write you via pm my nickname.
good luck you guys
i have really nothing to offer ..
but please make this happen ..
Unfortunately I really have no time to play with it this days, I'll try to take a look soon.
Envoyé de mon HUAWEI MT7-L09 en utilisant Tapatalk
Cpasjuste said:
Unfortunately I really have no time to play with it this days, I'll try to take a look soon.
Envoyé de mon HUAWEI MT7-L09 en utilisant Tapatalk
Click to expand...
Click to collapse
pls we wait for a long time:good:
It would be great to se cm no this device. Good luck and hope you make it. I would help if knew anything about programming but unfortanatly i dont
Cm we want... thank you for your interest!! ?
Kzyw said:
Cm we want... thank you for your interest!!
Click to expand...
Click to collapse
+1
why is there not one custom rom for this device?
Motawa88 said:
why is there not one custom rom for this device?
Click to expand...
Click to collapse
because huawei refuses to share their kernel source. suffice it to say, im done with huawei. its a good thing that there are many new phones being released soon. from now on its snapdragon or nothing!
Motawa88 said:
why is there not one custom rom for this device?
Click to expand...
Click to collapse
As I understand there are some crucial files / source codes that Huawei is refusing to release to the public. This alone sounds super dodgy, because isn't Android supposed to be open source? Or can companies "own" a custom version of Android and do this sort of thing?
These files are crucial for creating custom kernels and ROMs, as they have to do with (once again, this is how I interpreted it) how the device handles the CPU and GPU.
Basically, while it is possible to install other ROMs on the device, they'll have to be based on EMUI and its kernels, because it is the only thing that contains these files necessary to make the device run, which makes the entire exercise pointless because EMUI is s*** no matter what form it takes.
I wonder if it wouldn't be possible to simply "extract" this necessary code from the stock kernels / ROMs and implement it in a custom one? I do not know even the slightest thing about programming, so I could just be sounding like an idiot.
Scruffykid said:
I wonder if it wouldn't be possible to simply "extract" this necessary code from the stock kernels / ROMs and implement it in a custom one? I do not know even the slightest thing about programming, so I could just be sounding like an idiot.
Click to expand...
Click to collapse
i too have wondered about this. im sure its possible but it might be far to difficult an endeavor because if it weren't, someone would have attempted it by now. i really miss my nexus 5 with all its custom roms. i suggest that all mate 7 owners get in contact with huawei and demand they comply with the android user agreement. they are technically supposed to give up sources. we could fight, but not unless we unite.
Yes we can! Yes we can! Yes we can!
Scruffykid said:
As I understand there are some crucial files / source codes that Huawei is refusing to release to the public. This alone sounds super dodgy, because isn't Android supposed to be open source? Or can companies "own" a custom version of Android and do this sort of thing?
These files are crucial for creating custom kernels and ROMs, as they have to do with (once again, this is how I interpreted it) how the device handles the CPU and GPU.
Basically, while it is possible to install other ROMs on the device, they'll have to be based on EMUI and its kernels, because it is the only thing that contains these files necessary to make the device run, which makes the entire exercise pointless because EMUI is s*** no matter what form it takes.
I wonder if it wouldn't be possible to simply "extract" this necessary code from the stock kernels / ROMs and implement it in a custom one? I do not know even the slightest thing about programming, so I could just be sounding like an idiot.
Click to expand...
Click to collapse
You're right, extracting stock binary files is an essential part of roms porting but some important files can't be inherited because they are strictly hardware-related, therefore you have to compile the original android source and then "patch" that files for the specific GPU/CPU (starting from android 5 lollipop) with other files given by the vendor of the phone.
gabry3795 said:
...then "patch" that files for the specific GPU/CPU (starting from android 5 lollipop) with other files given by the vendor of the phone.
Click to expand...
Click to collapse
But isn't that the entire problem, the "other files" that have to be supplied by the vendor? Huawei is refusing to release them, and therefore making it impossible to develop custom ROM's.
Or are you saying that it is possible, but there just isn't enough interest in the phone for anyone with the necessary skills to actually go through the trouble?
Scruffykid said:
But isn't that the entire problem, the "other files" that have to be supplied by the vendor? Huawei is refusing to release them, and therefore making it impossible to develop custom ROM's.
Or are you saying that it is possible, but there just isn't enough interest in the phone for anyone with the necessary skills to actually go through the trouble?
Click to expand...
Click to collapse
I'm saying that Huawei must provide that 'patches' (as Qualcomm did, for example) otherwise is impossibile to build a working ROM, this is the problem. We cannot do anything without them.
gabry3795 said:
I'm saying that Huawei must provide that 'patches' (as Qualcomm did, for example) otherwise is impossibile to build a working ROM, this is the problem. We cannot do anything without them.
Click to expand...
Click to collapse
this is why we should all come together so as to put pressure on huawei to release these files. i have been trying for months now but its getting very tiresome. im going to start a twitter account that will hopefully get their attention. i think the problem is that the general public dont know much/anything about custom roms. there should be a custom rom psa for all android users that point out the benefits of custom roms.
droidbot1337 said:
this is why we should all come together so as to put pressure on huawei to release these files. i have been trying for months now but its getting very tiresome. im going to start a twitter account that will hopefully get their attention. i think the problem is that the general public dont know much/anything about custom roms. there should be a custom rom psa for all android users that point out the benefits of custom roms.
Click to expand...
Click to collapse
I agree. If you get that account running let us know here so that we can support it.
Cheers! :good:
---------- Post added at 12:03 PM ---------- Previous post was at 11:32 AM ----------
droidbot1337 said:
because huawei refuses to share their kernel source. suffice it to say, im done with huawei. its a good thing that there are many new phones being released soon. from now on its snapdragon or nothing!
Click to expand...
Click to collapse
Agreed.
Unfortunately I live in a place where just picking up a new phone is not as easy as 123, But I think I'll try and get my hands on a different phone this weekend. Huawei pisses me off.
No source release by Huawei.
No Kirin SOC support would be a huge problem to get it working I think.
Would like to use a clean version of Android instead of the EMUI version that is loaded on all their phones.
Seeing how these phones are identical, figured what would work for one would work with the other.
Thanks for giving me any insight.
Coming from the Galaxy Note 4 - hoping I'm not making a mistake with this phone that is enroute.
+1
Nothing happening on this phone I guess.
Jimi Mack said:
Nothing happening on this phone I guess.
Click to expand...
Click to collapse
Guess you haven't bothered looking at the ROMs and development section. While alot of ROMs are not what I would deem "daily material", their is working going on to get ROMs on this device.
Sent from my BND-L24 using Tapatalk
Here is a list of supported custom ROMs on Mate SE, Choose the A only ROM.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
The whole custom ROM world has changed, Now you need to apply system.img instead of rom.zip using fastboot command.
I have the PHH-Treble installed on my Huawei Mate SE. here is the link.
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
In addition, I'd check out the Open Kirin site. I've read the Lineage version is outstanding and well tuned for the chip. They list the 7x as supported but I've read the Mate SE most certainly is also.
https://openkirin.net/download/
nook'r said:
Here is a list of supported custom ROMs on Mate SE, Choose the A only ROM.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
The whole custom ROM world has changed, Now you need to apply system.img instead of rom.zip using fastboot command.
I have the PHH-Treble installed on my Huawei Mate SE. here is the link.
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Click to expand...
Click to collapse
Learning about this phone, why the A only roms?
AsItLies said:
In addition, I'd check out the Open Kirin site. I've read the Lineage version is outstanding and well tuned for the chip. They list the 7x as supported but I've read the Mate SE most certainly is also.
https://openkirin.net/download/
Click to expand...
Click to collapse
I've been running the OpenKirin Lineage v4 on my Mate SE as daily driver for over a week. It is outstanding. Not going back to emui.
olswede said:
I've been running the OpenKirin Lineage v4 on my Mate SE as daily driver for over a week. It is outstanding. Not going back to emui.
Click to expand...
Click to collapse
Coincidentally, just booted that ROM (on my SE) today. It's very very good, noticed a few minor glitches to do with the camera and navigation (will let them know about em).
I'll admit though, emui8 is growing on me It's certainly better than 5.1 was. Love to see the roms becoming available though. No doubt when updates stop (or before), they will be critical to have.
AsItLies said:
Coincidentally, just booted that ROM (on my SE) today. It's very very good, noticed a few minor glitches to do with the camera and navigation (will let them know about em).
I'll admit though, emui8 is growing on me It's certainly better than 5.1 was. Love to see the roms becoming available though. No doubt when updates stop (or before), they will be critical to have.
Click to expand...
Click to collapse
I don't mind emui except that the power-saver regularly kills tasker, ad-blocking vpns, etc. I've tried everything to exempt them from power saving but no go. The battery life is outstanding though (I usually only lose 15% after a full day's usage), so for average users it's a bonus.
nook'r said:
Here is a list of supported custom ROMs on Mate SE, Choose the A only ROM.
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
The whole custom ROM world has changed, Now you need to apply system.img instead of rom.zip using fastboot command.
I have the PHH-Treble installed on my Huawei Mate SE. here is the link.
https://forum.xda-developers.com/pr...-development/experimental-phh-treble-t3709659
Click to expand...
Click to collapse
Hey thanks for pointing me in the right direction. I have not installed a custom ROM in a long time.
---------- Post added at 08:44 AM ---------- Previous post was at 08:40 AM ----------
olswede said:
I've been running the OpenKirin Lineage v4 on my Mate SE as daily driver for over a week. It is outstanding. Not going back to emui.
Click to expand...
Click to collapse
This looks sweet, but the instruction on this site say I need my custom bootloader,and i can't find a guide how to do that. i have TWRP
AsItLies said:
Coincidentally, just booted that ROM (on my SE) today. It's very very good, noticed a few minor glitches to do with the camera and navigation (will let them know about em).
I'll admit though, emui8 is growing on me It's certainly better than 5.1 was. Love to see the roms becoming available though. No doubt when updates stop (or before), they will be critical to have.
Click to expand...
Click to collapse
Any chance you'd elaborate on the issues you've come across? I'm thinking about loading it up but don't want to lose functionality
JakeBuck said:
Any chance you'd elaborate on the issues you've come across? I'm thinking about loading it up but don't want to lose functionality
Click to expand...
Click to collapse
Nothing terribly serious. I didn't use it for long, but the camera option for selfie shutter 'palm to camera' didn't work. Also the recently taken shots didn't show in the bottom gallery (I read this is fixed now). And the navigation arrows at the bottom seemed to not be persistent somehow (after a reboot this was okay).
It's easy to go back to stock, except if you haven't backed everything up, have to reconfigure, add / subtract apps etc.
I'd suggest searching for the openKirin website, they seem to be doing the most development. Also follow their directions, they worked for me and pretty easy.
Hi
How does one flash the "Openkirin_los_beta4" Iso to the Mate SE (BND-L34)? TWRP?? Fastboot??? what are the exact steps to not render it a paper weight again lol; Do you need Magisk-v16.0 to root it as well?
Scythe69 said:
Hi
How does one flash the "Openkirin_los_beta4" Iso to the Mate SE (BND-L34)? TWRP?? Fastboot??? what are the exact steps to not render it a paper weight again lol; Do you need Magisk-v16.0 to root it as well?
Click to expand...
Click to collapse
https://openkirin.net/user_guide/openkirin-rom-installation-instructions/
zackzuse said:
This looks sweet, but the instruction on this site say I need my custom bootloader,and i can't find a guide how to do that. i have TWRP
Click to expand...
Click to collapse
No, you don't need a custom bootloader.
You only need unlocked bootloader and unlocked frp.
TWRP is not supported on OpenKirin ROMs (especially on 7x twrp won't work).
You just need to flash the .img file through bootloader and then reboot to recovery and do a factory data reset.
Can anyone give me some advice: I have the Mate SE, currently on EMUI 8.0.0.332 (security update available but not installed), with TWRP and Magisk. I would love to install a custom ROM, but the OpenKirin site says TWRP isn't supported. Can I still install one of those builds and just expect no support if something goes wrong, or should I find some way to return to full stock before flashing? And if I need stock recovery, where can I find a download for it? I haven't had any luck on searching here yet.
Install Android 9.0 Pie on Honor 7X – AOSP 9.0 Pie ROM
youssef alonso said:
Install Android 9.0 Pie on Honor 7X – AOSP 9.0 Pie ROM
Click to expand...
Click to collapse
Has anyone tried this custom ROM? I would love to hear some success stories before possibly bricking my device
awlonsky said:
Has anyone tried this custom ROM? I would love to hear some success stories before possibly bricking my device
Click to expand...
Click to collapse
Pretty much any GSI works so long as you have updated to EMUI 8 sometime in the past.
The Moto z play had plenty of developers dedicated to it but this has practically nothing. Is there a reason for that or did no developers buy this phone?
AndroidNazi said:
The Moto z play had plenty of developers dedicated to it but this has practically nothing. Is there a reason for that or did no developers buy this phone?
Click to expand...
Click to collapse
They're out there, google 'nash' roms and you should be able to find them. Some don't get posted here per XDA's request, the developer's, and/or both? Not sure what which is the case, but they're out there. I think they might be gearing more for treble and pie which isn't official on either side for us at the moment. With an official pie update in the future I'm sure some are hoping that'll fix some annoyances that have not been completely ironed out on the stock and custom side.
41rw4lk said:
They're out there, google 'nash' roms and you should be able to find them. Some don't get posted here per XDA's request, the developer's, and/or both? Not sure what which is the case, but they're out there. I think they might be gearing more for treble and pie which isn't official on either side for us at the moment. With an official pie update in the future I'm sure some are hoping that'll fix some annoyances that have not been completely ironed out on the stock and custom side.
Click to expand...
Click to collapse
If you do a google search, there is not that many for this device.. The roms that are available can be found here on XDA, (not many). Only other one I know of is Dirty Unicorn, which I have ran already for a while..
doubledragon5 said:
If you do a google search, there is not that many for this device.. The roms that are available can be found here on XDA, (not many). Only other one I know of is Dirty Unicorn, which I have ran already for a while..
Click to expand...
Click to collapse
Mokee is the only other one I could find. LOS 16 on Android file host runs really nice but it stopped getting updated around the end of September.
41rw4lk said:
They're out there, google 'nash' roms and you should be able to find them. Some don't get posted here per XDA's request, the developer's, and/or both? Not sure what which is the case, but they're out there. I think they might be gearing more for treble and pie which isn't official on either side for us at the moment. With an official pie update in the future I'm sure some are hoping that'll fix some annoyances that have not been completely ironed out on the stock and custom side.
Click to expand...
Click to collapse
Could you point me to the latest files to do trevle on Nash? I did treble on Addison so I know relatively what I need to do.
AndroidNazi said:
Could you point me to the latest files to do trevle on Nash? I did treble on Addison so I know relatively what I need to do.
Click to expand...
Click to collapse
Official LineageOS is treble enabled. Flash it, let it boot once, wipe data and flash the GSI of your choice.
Uzephi said:
Official LineageOS is treble enabled. Flash it, let it boot once, wipe data and flash the GSI of your choice.
Click to expand...
Click to collapse
Good to know, thanks.
I recently purchased an tab S4 just an update from my previous Samsung tablet. I was wondering is there more ROMs for this tablet or ROMs currently in development? I noticed theres like 2 ROMs for this tablet. I have a note 8 and I'm currently running deluxerom on and it, and I really enjoy the tweaks and customization I'm able to do. I was looking for a same kind of feature for my tablet. Would greatly appreciate the answers I'm looking for. Thanks!
Mkami said:
I recently purchased an tab S4 just an update from my previous Samsung tablet. I was wondering is there more ROMs for this tablet or ROMs currently in development? I noticed theres like 2 ROMs for this tablet. I have a note 8 and I'm currently running deluxerom on and it, and I really enjoy the tweaks and customization I'm able to do. I was looking for a same kind of feature for my tablet. Would greatly appreciate the answers I'm looking for. Thanks!
Click to expand...
Click to collapse
Pretty much zero support. You can get a few 9.0 GSI ROMs to boot, but they all have issues. Mine has been sitting around since it was purchased while still using my old 2014 model.
veekay said:
Pretty much zero support. You can get a few 9.0 GSI ROMs to boot, but they all have issues. Mine has been sitting around since it was purchased while still using my old 2014 model.
Click to expand...
Click to collapse
Aww no way!? Really? I excitingly got this tablet cause of the features and thought perhaps there would be amazing ROMs for this particular tablet, but I guess not xD What are GSI ROMs? Also as a desperate attempt would other tablet ROMs work on this s4? Thanks mate!
Mkami said:
Aww no way!? Really? I excitingly got this tablet cause of the features and thought perhaps there would be amazing ROMs for this particular tablet, but I guess not xD What are GSI ROMs? Also as a desperate attempt would other tablet ROMs work on this s4? Thanks mate!
Click to expand...
Click to collapse
I had thought the same thing, but it seems the S3 is the last tablet to get real support.
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Some of the ones for 9 will work, but most features won't work too well, if at all.
You might be able to get another rom to work, I know I had no luck. Even trying ones with similar hardware, they all failed to even flash since the booting numbers are different.
Kind of have to be satisfied with Samsung, half baked custom roms or sell the thing.
Mkami said:
Aww no way!? Really? I excitingly got this tablet cause of the features and thought perhaps there would be amazing ROMs for this particular tablet, but I guess not xD What are GSI ROMs? Also as a desperate attempt would other tablet ROMs work on this s4? Thanks mate!
Click to expand...
Click to collapse
First,download "Treble Check" app from playstore & read for your device...
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
(Some GSIs roms are not compatible with some devices!)
veekay said:
I had thought the same thing, but it seems the S3 is the last tablet to get real support.
https://forum.xda-developers.com/project-treble/trebleenabled-device-development
Some of the ones for 9 will work, but most features won't work too well, if at all.
You might be able to get another rom to work, I know I had no luck. Even trying ones with similar hardware, they all failed to even flash since the booting numbers are different.
Kind of have to be satisfied with Samsung, half baked custom roms or sell the thing.
Click to expand...
Click to collapse
Hey Veekay I tried it and you're right unfortunately I came across the same issue as you brother
Now I'm stuck and I need help sorting my device out, was wondering if you knew this issue or could help?
When I got the stock firmware back and then when I flash TWRP with odin after going into TWRP I get 0mb as internal
so when I format and then go back into my load up the screen after SAMSUNG says "verification failed" and then reset
on the bottom. I tried other options as well. Without even wiping on TWRP the devices boots up into the setup wizard for the firmware fine
but after I wipe TWRP so I can get access to my internal drive my samsung boots into that verification reset screen. Got any clue as to how I can
resolve this issue? Thanks a bunch!
daitalos said:
First,download "Treble Check" app from playstore & read for your device...
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
(Some GSIs roms are not compatible with some devices!)
Click to expand...
Click to collapse
Hey! Thanks for your reply, will this work for PIE? I can't downgrade from PIE to OREO
and I don't know if GSI even works properly on my device
Mkami said:
Hey Veekay I tried it and you're right unfortunately I came across the same issue as you brother
Now I'm stuck and I need help sorting my device out, was wondering if you knew this issue or could help?
When I got the stock firmware back and then when I flash TWRP with odin after going into TWRP I get 0mb as internal
so when I format and then go back into my load up the screen after SAMSUNG says "verification failed" and then reset
on the bottom. I tried other options as well. Without even wiping on TWRP the devices boots up into the setup wizard for the firmware fine
but after I wipe TWRP so I can get access to my internal drive my samsung boots into that verification reset screen. Got any clue as to how I can
resolve this issue? Thanks a bunch!
Click to expand...
Click to collapse
Have you tried just reloading the latest stock firmware from scratch?
Yup, its unfortunate that there isn't much community support for this device. The Tab S4 is Project Treble supported and a few GSI ROMS do work. But as others have said they are unstable and not for use as a daily driver. We have a few discussion threads here talking about them.
veekay said:
Have you tried just reloading the latest stock firmware from scratch?
Click to expand...
Click to collapse
Would that work? If I did that I would still be able to download and install TWRP and have a root? Because of it being PIE
UndeadAnarchy said:
Yup, its unfortunate that there isn't much community support for this device. The Tab S4 is Project Treble supported and a few GSI ROMS do work. But as others have said they are unstable and not for use as a daily driver. We have a few discussion threads here talking about them.
Click to expand...
Click to collapse
I am going to do more research on these projects because I really wish there was more ROMs its quite an amazing tablet but the potential with the stock ROM lacks a lot
Mkami said:
Hey! Thanks for your reply, will this work for PIE? I can't downgrade from PIE to OREO
and I don't know if GSI even works properly on my device
Click to expand...
Click to collapse
Generic System Image (GSI) list :
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
you can try only "Android 9 Pie" official or unofficial gsi roms..
and remember ! Some GSIs roms maybe are not compatible with some devices! you can ask for your device on each thread
(for example look here): https://github.com/phhusson/treble_experimentations/issues/777
(usually this Gsi aosp 9 phh, generally works on most devices...BUT! ask first,and discuss it in the thread)
https://forum.xda-developers.com/pr...vice-development/aosp-9-0-phh-treble-t3831915
daitalos said:
Generic System Image (GSI) list :
https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
you can try only "Android 9 Pie" official or unofficial gsi roms..
and remember ! Some GSIs roms maybe are not compatible with some devices! you can ask for your device on each thread
(for example look here): https://github.com/phhusson/treble_experimentations/issues/777
(usually this Gsi aosp 9 phh, generally works on most devices...BUT! ask first,and discuss it in the thread)
https://forum.xda-developers.com/pr...vice-development/aosp-9-0-phh-treble-t3831915
Click to expand...
Click to collapse
Can I do this without stock ROM and only TWRP? Because having the stock ROM is disabling my twrp to function without wiping and if I wipe than my stock ROM doesn't work
Thanks!
Mkami said:
Can I do this without stock ROM and only TWRP? Because having the stock ROM is disabling my twrp to function without wiping and if I wipe than my stock ROM doesn't work
Thanks!
Click to expand...
Click to collapse
Sorry,but I don't understand what do you mean " without stock rom and only twrp"...
you can install a Gsi rom, with two ways
Via TWRP, or Via Fastboot : https://www.xda-developers.com/flash-generic-system-image-project-treble-device/ (Tab S4 is a-only arm64)
for any other question, it is better to ask in the thread : https://forum.xda-developers.com/pr...vice-development/aosp-9-0-phh-treble-t3831915
(read carefully in OP & you can post,every single question there for your device,and you will get certainly help from the developer or from any other user..)
Mkami said:
Can I do this without stock ROM and only TWRP? Because having the stock ROM is disabling my twrp to function without wiping and if I wipe than my stock ROM doesn't work
Thanks!
Click to expand...
Click to collapse
You are going to have to just wipe it and start over from square one, unless you made a TWRP backup before starting all of this.
Download and flash the latest stock rom from recovery and then you can load twrp again.
I was looking at the possibility of using GSI's on some devices, and while they can offer new life to older devices, they're not entirely stable all the time unless you're willing to make your own changes. I know Lineage has made some excellent progress, but it's not fullproof yet and I wouldn't try it unless you're willing to not use your device as a daily use device.
I had an extra T-Mobile Revvlry which is basically a rebranded Moto g7 Play that I installed the Lineage GSI image and it works fairly well. However, this is more the exception to the rule and Moto devices, I feel, are far simpler in design vs certain Samsung devices. It also had a ton of trial and error involved for me to get it up and running properly.
Is it possible as the s4 becomes older, more people buy it and Samsung stops releasing official updates that someone will come along and create a ROM for it? Or is it more like Samsung locked the bootloaders and its close to impossible to write a ROM for it? Is it still possible to root the s4?
slipnslider said:
Is it possible as the s4 becomes older, more people buy it and Samsung stops releasing official updates that someone will come along and create a ROM for it? Or is it more like Samsung locked the bootloaders and its close to impossible to write a ROM for it? Is it still possible to root the s4?
Click to expand...
Click to collapse
Read very carefully without rush ! for " WETA Kernel + Encryption disabler " etc
especially, read the user comments carefully, and ask on the thread for any questions you have..
https://forum.xda-developers.com/galaxy-tab-s4/development/recovery-twrp-3-3-0-sm-t83x-t3928278 (Pie version)
https://forum.xda-developers.com/showpost.php?p=79483624&postcount=2
https://forum.xda-developers.com/galaxy-tab-s4/how-to/guide-sm-t83x-twrp-magisk-t4059227
( Newest Odin v3.14.4 is there : https://dl2018.sammobile.com/Odin3-v3.14.4.zip )
Thanks. I took a quick peak at the roms and kernels in the roms and kernels forum and they are pretty much all abandoned.
Someone did mention that the LOS 16.0 and ArrowOS GSI's work alright but are a bit buggy.
slipnslider said:
Thanks. I took a quick peak at the roms and kernels in the roms and kernels forum and they are pretty much all abandoned.
Someone did mention that the LOS 16.0 and ArrowOS GSI's work alright but are a bit buggy.
Click to expand...
Click to collapse
samsung,maybe at the end of july to give the upgrade to android 10....it is very likely to happen I think
yes,all Gsi Roms still have various problems unfortunately...
my opinion is: stay to stock rom for now....you can "uninstall" many applications if you want & without root, via "samsung package disabler"(paid) from playstore, or with this way:
https://beebom.com/how-remove-bloatware-android-without-root/
also,you can Install "NiceLock Downloader Companion App" ,to add some features on your device : https://forum.xda-developers.com/galaxy-note-9/themes/nicelock-module-download-links-module-t3923844
with this way I operate my device until now..
hello everyone, i want to buy this devie but as i see i cant install twrp!
if i can ask why? is it bc of oneplus or no devs to do it? also thx for all devs
i buy the phone for customs and roms and twrp and rooting and this things, this is my priorities
and is this device fully supported for development? any twrp coming soon?
and what about customs here? is they easy to install?
is this device good for gaming and daily use?
Evon88 said:
hello everyone, i want to buy this devie but as i see i cant install twrp!
if i can ask why? is it bc of oneplus or no devs to do it? also thx for all devs
i buy the phone for customs and roms and twrp and rooting and this things, this is my priorities
and is this device fully supported for development? any twrp coming soon?
and what about customs here? is they easy to install?
is this device good for gaming and daily use?
Click to expand...
Click to collapse
What device and firmware?
TheGhost1951 said:
What device and firmware?
Click to expand...
Click to collapse
i want to buy normal OP9P
Evon88 said:
i want to buy normal OP9P
Click to expand...
Click to collapse
The OnePlus 9 pro is good for customizing!
@Evon88, the fact is, TWRP hasn't been updated to properly support Android 12, at least not on the 9 Pro, and I'm beginning to suspect that it never will be. IMHO, it looks to me like encryption and other issues introduced by Google have simply gotten the best of the TWRP team. I'll be happy to be proven wrong, and will be pleasantly surprised if TWRP is updated to work with Android 12 and above, but right now, that remains in the realm of wishful thinking.
The good news is that the recoveries included with most Android 12 ROMs (based on the AOSP recovery) are functional, and are capable of doing the minimum work of flashing new ROMs and upgrades (i.e. Magisk and Gapps) just like TWRP. They certainly don't have the wealth of features that TWRP has (such as the ability to wipe only the data partition without erasing the media partition; it's either all or nothing), but then, they weren't designed to have them. I keep hoping that someone will take the AOSP recovery and use it as a base for a recovery that includes more of TWRP's features. (I'd do it if I had the knowledge. I'm knowledgeable enough to poke at AOSP and cherry pick features to create a custom ROM, but the intimate knowledge required to work with the recovery code is something I don't have.)
Evon88 said:
hello everyone, i want to buy this devie but as i see i cant install twrp!
if i can ask why? is it bc of oneplus or no devs to do it? also thx for all devs
i buy the phone for customs and roms and twrp and rooting and this things, this is my priorities
and is this device fully supported for development? any twrp coming soon?
and what about customs here? is they easy to install?
is this device good for gaming and daily use?
Click to expand...
Click to collapse
You can in fact install and boot TWRP. But you can't do almost anything in it... But this isn't OP9P problem but every phone with Android 12 and encryprion enabled. But as other said, TWRP isn't needed for flashing custom ROMs.
Evon88 said:
i want to buy normal OP9P
Click to expand...
Click to collapse
Don't let lack of twrp hold you back. It's a fun phone. I use it for gaming (CODM) on Android 11.2.10.10 just fine. I may end up flashing an old build of crDroid for Android 11 but I'm pretty happy with how everything is set up on regular OOS now and don't want to lose L1 and start back over.
Unlocked bootloader✓
Root/Magisk✓
SafetyNet✓
Netflix, GPay, Banking apps✓
L1 Widevine✓
Real OOS✓
65w charging✓
120hz LTPO✓
No Dual Sim
The tmobile variant is still for sale on ebay at $469 brand new in the box or from OnePlus directly (also Tmo variant) for $499
MJPollard said:
@Evon88, the fact is, TWRP hasn't been updated to properly support Android 12, at least not on the 9 Pro, and I'm beginning to suspect that it never will be. IMHO, it looks to me like encryption and other issues introduced by Google have simply gotten the best of the TWRP team. I'll be happy to be proven wrong, and will be pleasantly surprised if TWRP is updated to work with Android 12 and above, but right now, that remains in the realm of wishful thinking.
The good news is that the recoveries included with most Android 12 ROMs (based on the AOSP recovery) are functional, and are capable of doing the minimum work of flashing new ROMs and upgrades (i.e. Magisk and Gapps) just like TWRP. They certainly don't have the wealth of features that TWRP has (such as the ability to wipe only the data partition without erasing the media partition; it's either all or nothing), but then, they weren't designed to have them. I keep hoping that someone will take the AOSP recovery and use it as a base for a recovery that includes more of TWRP's features. (I'd do it if I had the knowledge. I'm knowledgeable enough to poke at AOSP and cherry pick features to create a custom ROM, but the intimate knowledge required to work with the recovery code is something I don't have.)
Click to expand...
Click to collapse
Bugscze said:
You can in fact install and boot TWRP. But you can't do almost anything in it... But this isn't OP9P problem but every phone with Android 12 and encryprion enabled. But as other said, TWRP isn't needed for flashing custom ROMs.
Click to expand...
Click to collapse
There's a user/team on the >OnePlus 6 & 6T forums<, that has had success with Android 12 and 13 decrypt, I use it on my 6T, and decrypt works flawlessly, I use it to flash Magisk when changing/updating ROMs.
It's Unofficial however, I hope it trickles to other devices.
Appreciative said:
Don't let lack of twrp hold you back. It's a fun phone. I use it for gaming (CODM) on Android 11.2.10.10 just fine. I may end up flashing an old build of crDroid for Android 11 but I'm pretty happy with how everything is set up on regular OOS now and don't want to lose L1 and start back over.
Unlocked bootloader✓
Root/Magisk✓
SafetyNet✓
Netflix, GPay, Banking apps✓
L1 Widevine✓
Real OOS✓
65w charging✓
120hz LTPO✓
No Dual Sim
The tmobile variant is still for sale on ebay at $469 brand new in the box or from OnePlus directly (also Tmo variant) for $499
Click to expand...
Click to collapse
thank you sir, what about chinese version? u recommend it? im pro at rooting and customs and msm, if the problem is just roms, i see used chinese new mobile, u recommend me to buy?
deleted
MJPollard said:
@Evon88, the fact is, TWRP hasn't been updated to properly support Android 12, at least not on the 9 Pro, and I'm beginning to suspect that it never will be. IMHO, it looks to me like encryption and other issues introduced by Google have simply gotten the best of the TWRP team. I'll be happy to be proven wrong, and will be pleasantly surprised if TWRP is updated to work with Android 12 and above, but right now, that remains in the realm of wishful thinking.
The good news is that the recoveries included with most Android 12 ROMs (based on the AOSP recovery) are functional, and are capable of doing the minimum work of flashing new ROMs and upgrades (i.e. Magisk and Gapps) just like TWRP. They certainly don't have the wealth of features that TWRP has (such as the ability to wipe only the data partition without erasing the media partition; it's either all or nothing), but then, they weren't designed to have them. I keep hoping that someone will take the AOSP recovery and use it as a base for a recovery that includes more of TWRP's features. (I'd do it if I had the knowledge. I'm knowledgeable enough to poke at AOSP and cherry pick features to create a custom ROM, but the intimate knowledge required to work with the recovery code is something I don't have.)
Click to expand...
Click to collapse
thank you bro for explain, what do you think about chinese OP9P? i can change the rom, 5G i dont care that much, anthing else? is quality the same like hardware and plastic and fiber and this things? i mean phone body and screen
Bugscze said:
You can in fact install and boot TWRP. But you can't do almost anything in it... But this isn't OP9P problem but every phone with Android 12 and encryprion enabled. But as other said, TWRP isn't needed for flashing custom ROMs.
Click to expand...
Click to collapse
thanks, <3
Evon88 said:
thank you sir, what about chinese version? u recommend it? im pro at rooting and customs and msm, if the problem is just roms, i see used chinese new mobile, u recommend me to buy?
Click to expand...
Click to collapse
All of them are made in china and I think will be good quality OnePlus phone. I don't know if they use anything different (except rom). You can change from colorOS to oxygenOS
twrp not needed
vincemue said:
twrp not needed
Click to expand...
Click to collapse
Needed, maybe not. Desired, definitely. It can do a lot of things that the stock and AOSP recoveries simply can't (to name just one: it can wipe data without wiping storage, as I mentioned above; stock/AOSP recoveries' "factory reset" wipe destroys everything).
MJPollard said:
@Evon88, the fact is, TWRP hasn't been updated to properly support Android 12, at least not on the 9 Pro, and I'm beginning to suspect that it never will be. IMHO, it looks to me like encryption and other issues introduced by Google have simply gotten the best of the TWRP team. I'll be happy to be proven wrong, and will be pleasantly surprised if TWRP is updated to work with Android 12 and above, but right now, that remains in the realm of wishful thinking.
The good news is that the recoveries included with most Android 12 ROMs (based on the AOSP recovery) are functional, and are capable of doing the minimum work of flashing new ROMs and upgrades (i.e. Magisk and Gapps) just like TWRP. They certainly don't have the wealth of features that TWRP has (such as the ability to wipe only the data partition without erasing the media partition; it's either all or nothing), but then, they weren't designed to have them. I keep hoping that someone will take the AOSP recovery and use it as a base for a recovery that includes more of TWRP's features. (I'd do it if I had the knowledge. I'm knowledgeable enough to poke at AOSP and cherry pick features to create a custom ROM, but the intimate knowledge required to work with the recovery code is something I don't have.)
Click to expand...
Click to collapse
I was on LE2127_11_C20 A12 with tarp and root.......the mail reason it worked was no lock screen security. I did try with setting a password is be cause a script to try and make partitions R/W but that put me in a bootloader loop. Went back to 11.2.9.9..
Did you follow a YouTube tutorial step by step guide to see if you made any mistakes?
dartballs said:
Did you follow a YouTube tutorial step by step guide to see if you made any mistakes?
Click to expand...
Click to collapse
Who are you asking?
Appreciative said:
Don't let lack of twrp hold you back. It's a fun phone. I use it for gaming (CODM) on Android 11.2.10.10 just fine. I may end up flashing an old build of crDroid for Android 11 but I'm pretty happy with how everything is set up on regular OOS now and don't want to lose L1 and start back over.
Unlocked bootloader✓
Root/Magisk✓
SafetyNet✓
Netflix, GPay, Banking apps✓
L1 Widevine✓
Real OOS✓
65w charging✓
120hz LTPO✓
No Dual Sim
The tmobile variant is still for sale on ebay at $469 brand new in the box or from OnePlus directly (also Tmo variant) for $499
Click to expand...
Click to collapse
The Indian variant has dual SIM. Maybe some others variants, too.