Build number: CPH2449_11_A.10
Kernel version: 5.15.74-android13-8-00007-gb328aadc6d46-ab9979065
Check the attached screenshots for the changelog:
Thanks for the infos.
I wonder how many updates to "improve wifi connections" this device will need though. I didnt noticed it at first but wifi is indeed flimsy on this device.
_Johnito_ said:
Thanks for the infos.
I wonder how many updates to "improve wifi connections" this device will need though. I didnt noticed it at first but wifi is indeed flimsy on this device.
Click to expand...
Click to collapse
TBO I've never had issues with WiFi connectivity on any of my previous Android phones. To say it's a bummer is an understatement. With A09 I couldn't watch videos online for more than 15 minutes as the device dropped WiFi for up to a minute. I've not tested A10 enough to claim that the issue is resolved.
Rooting with kernel su still working?
i found some point after i update, my phone alway show no sim card. and i checked show unknow version on baseband !!
I found that there is a bug after A09 to A10.
For example, when I tap something in the telegram, the tapped item should be greyed shortly. But I cannot see this....
update failure .. can u help please ?
fal4fal said:
update failure .. can u help please ?
Click to expand...
Click to collapse
You most likely have a Chinese phone which was flashed to OxygenOS. You need to (re)install it properly or revert to ColorOS.
birdie said:
You most likely have a Chinese phone which was flashed to OxygenOS. You need to (re)install it properly or revert to ColorOS.
Click to expand...
Click to collapse
Hey birdie,
no i have the global version not the Chinese
fal4fal said:
Hey birdie,
no i have the global version not the Chinese
Click to expand...
Click to collapse
Backup, factory reset, try to install an update again.
shootind5nukes said:
Rooting with kernel su still working?
Click to expand...
Click to collapse
Yes
birdie said:
Backup, factory reset, try to install an update again.
Click to expand...
Click to collapse
still same issue
RMA/refund.
Can we flash indian firmware over global version ??
no
shootind5nukes said:
Rooting with kernel su still working?
Click to expand...
Click to collapse
Yes.
Related
Hey Guys,
Recently I've discovered that both BT and Wi-Fi do not work if they are enabled together. Could you please give me a hint if it's hardware issue or I can fix it via software change?
Tried to change other ROMs and situation is the same. I believe it's something with BT\Wi-Fi modem drivers which could be flashed separately
ROM: Wolla v6.2
Android: 6.0.1
FW: 6.16.401.101
I would be very appreciated for your help.
Best Regards,
DJ_Cas
DJ_Casper said:
FW: 6.16.401.101
Click to expand...
Click to collapse
How are you determining this?
redpoint73 said:
How are you determining this?
Click to expand...
Click to collapse
Booting into Bootloader
The problem is solved by installing CM 13.0. Problem was in my last FW called Wolla v6.2
DJ_Casper said:
Booting into Bootloader
Click to expand...
Click to collapse
That is the correct way to determine firmware number. :good:
DJ_Casper said:
Problem was in my last FW called Wolla v6.2
Click to expand...
Click to collapse
This however, is not the right usage of the term "firmware" (FW). Its not the same as a ROM.
Hello Everyone,
Hope You All Are Doing Great !
Can Someone Provide Me The Latest Available Stock ROM Link For A2 Lite Device ? As I Need To Flash Stock ROM Through MI Flash Tool.
Thanks In Advance..
Thanks,
MUHAMMAD Asif Qasim
https://c.mi.com/oc/miuidownload/detail?device=1700354
prodang2509 said:
https://c.mi.com/oc/miuidownload/detail?device=1700354
Click to expand...
Click to collapse
Thank You For The Prompt Response. I Already Seen That Link. I Was Thinking That May Be Somewhere V10.0.15.0.PDLMIXM Will Be Uploaded. So That's Why I Raised The Query.
Thank You Once Again.
aasiaasi said:
Thank You For The Prompt Response. I Already Seen That Link. I Was Thinking That May Be Somewhere V10.0.15.0.PDLMIXM Will Be Uploaded. So That's Why I Raised The Query.
Thank You Once Again.
Click to expand...
Click to collapse
When you update to the latest version (v10.0.13.0 from fastboot) on here https://forum.xda-developers.com/mi-a2-lite/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824871 once you set your data connection probably you can get a notification to update to the latest OTA v10.0.15.0 from around 66 mb sized and this firmware can be useful to flash the rom at any time that you need it.
aasiaasi said:
Thank You For The Prompt Response. I Already Seen That Link. I Was Thinking That May Be Somewhere V10.0.15.0.PDLMIXM Will Be Uploaded. So That's Why I Raised The Query.
Thank You Once Again.
Click to expand...
Click to collapse
https://bigota.d.miui.com/V10.0.16.0.PDLMIXM/miui_DAISYGlobal_V10.0.16.0.PDLMIXM_71b77f7c2b_9.0.zip
Codename: daisy
Channel: Global Stable
Version: V10.0.16.0.PDLMIXM
SubwayChamp said:
When you update to the latest version (v10.0.13.0 from fastboot) on here https://forum.xda-developers.com/mi-a2-lite/how-to/fastboot-xiaomi-mi-a2-fastboot-images-t3824871 once you set your data connection probably you can get a notification to update to the latest OTA v10.0.15.0 from around 66 mb sized and this firmware can be useful to flash the rom at any time that you need it.
Click to expand...
Click to collapse
a1291762 said:
I'm used to flashing from fastboot but I'm pretty sure that only works with an unlocked bootloader. I've read that you can use miflash with a locked bootloader but you need a complete rom and the most recent one is 10.0.13.0
Sorry
Click to expand...
Click to collapse
Thank You For Time And Reply.
OKay What Should We Do To Fix The (Partition) Problem. ? Complete Stepwise Guide Will Be Beneficial To Us.
One More Question.
Is There A Way To Get Every Month OTA Installed Without Interrupting (Unlock Bootloader , Rooted With Magisk) ? If Yes , So What Could Be The Steps/Guide. I Am Frustrated.
Thanks.
aasiaasi said:
Thank You For Time And Reply.
OKay What Should We Do To Fix The (Partition) Problem. ? Complete Stepwise Guide Will Be Beneficial To Us.
One More Question.
Is There A Way To Get Every Month OTA Installed Without Interrupting (Unlock Bootloader , Rooted With Magisk) ? If Yes , So What Could Be The Steps/Guide. I Am Frustrated.
Thanks.
Click to expand...
Click to collapse
What is the problem with partition? You didn't mention it before.
Regarding OTA and keep custom stuff there is here a thread where is discussed
https://forum.xda-developers.com/mi-a2-lite/how-to/10-0-4-0-to-10-0-7-0-ota-keeping-magisk-t3916863
SubwayChamp said:
What is the problem with partition? You didn't mention it before.
Regarding OTA and keep custom stuff there is here a thread where is discussed
https://forum.xda-developers.com/mi-a2-lite/how-to/10-0-4-0-to-10-0-7-0-ota-keeping-magisk-t3916863
Click to expand...
Click to collapse
Thanks For The Swift Response.
The Issue is That , The November Security Patch Is Not Installing. My Phone Is Not Rooted And Bootloader Is Locked Too With Stock ROM. I Read The Queries Related To My Phone Issue People Are Saying That This Is The Partition Issue.
aasiaasi said:
Thanks For The Swift Response.
The Issue is That , The November Security Patch Is Not Installing. My Phone Is Not Rooted And Bootloader Is Locked Too With Stock ROM. I Read The Queries Related To My Phone Issue People Are Saying That This Is The Partition Issue.
Click to expand...
Click to collapse
I don´t think that this could be the issue in your specific case if your device never was modified so partition remain as stock as Xiaomi released it.
You can read something like this either update is from Xiaomi itself or a Google security patch https://www.theverge.com/2019/9/4/20847758/google-android-update-problem-pie-q-treble-mainline
https://thedroidguy.com/2019/11/how-to-fix-xiaomi-pocophone-f1-wont-install-update-issue-keeps
Finally the December Security Patch is here.
First on EU version this time or both EU and GLOBAL?
Now to wait until 31st December or mid January for next update, hope this time we get Android 10.
- white noise on low media volumes is still not fixed
- fingerprint sensor seems more accurate with night light/screen protector
- wifi dropping issues have been fixed
i hope we'll get android 10 update till 31st December.
papsr6 said:
First on EU version this time or both EU and GLOBAL?
Click to expand...
Click to collapse
Both
I can confirm no bugs I reported were fixed. However I have noticed, screen no longer increases brightness slightly when picking up the phone.
thearorahimanshu said:
i hope we'll get android 10 update till 31st December.
Click to expand...
Click to collapse
hungry loaves dream
Does anyone with TWRP installed have any problem installing this December update? I have TWRP and when I try to update it always says installation problem.
Is there anything I should be doing?
Khaderaque said:
Does anyone with TWRP installed have any problem installing this December update? I have TWRP and when I try to update it always says installation problem.
Is there anything I should be doing?
Click to expand...
Click to collapse
I don't think you can install stock update by twrp.
I think only with stock recovery can do.
papsr6 said:
I don't think you can install stock update by twrp.
I think only with stock recovery can do.
Click to expand...
Click to collapse
thank you for your reply, but I'm installing through system update.
And avoid
Khaderaque said:
thank you for your reply, but I'm installing through system update.
Click to expand...
Click to collapse
Yes but after downloading use the recovery to flash and you have twrp not the stock.
So maybe faild when it try to use the recovery.
10.3.12.0 for global and 10.3.13.0 eu
tereyaglidoner said:
I can confirm no bugs I reported were fixed. However I have noticed, screen no longer increases brightness slightly when picking up the phone.
Click to expand...
Click to collapse
Screen is no longer overshooting the brightness after fingerprint unlock.
Khaderaque said:
thank you for your reply, but I'm installing through system update.
Click to expand...
Click to collapse
I face this problem when using mi a2... Now my mi a2 is stuck at november 2018 update
zaff_haziq said:
I face this problem when using mi a2... Now my mi a2 is stuck at november 2018 update
Click to expand...
Click to collapse
It's normal, you can't update with a TWRP installed, the solution Is simple, reinstall the stock ROM (from fastboot) and you're good to go.
Patch arrived in France too.
Greece too. No noticeable difference to Nov update.
N1ck474 said:
It's normal, you can't update with a TWRP installed, the solution Is simple, reinstall the stock ROM (from fastboot) and you're good to go.
Click to expand...
Click to collapse
Too late because of that problem i have changed to Mi A3
zaff_haziq said:
Too late because of that problem i have changed to Mi A3
Click to expand...
Click to collapse
You could just flash the stock boot.img in twrp for your specific firmware version and thats it, update no problem
Am I the only one who's not able to hear audio calls/use microphone in call after the update?
Edit: nope, it's my cellular network provider that sucks. No worries.
I've been scouring XDA, google, oneplus forums, and oxygen updater.
I'm not seeing an update anywhere. Oxygen Updater says i'm up to date (i'm not)
what the heck?
I grabbed EU one from Oxygen Updater, Indian one is on there too, looks like it's just NA missing
Thats why i switched from tmobile rom to EU.
I'm on an LE2125... factory unlocked. What the heck.
OnePlus / Google will release the full zip if and when they feel like it for AA, and there is a very high chance you won't get it. If you want a full zip always available go with BA or DA.
craznazn said:
OnePlus / Google will release the full zip if and when they feel like it for AA, and there is a very high chance you won't get it. If you want a full zip always available go with BA or DA.
Click to expand...
Click to collapse
Never used to be this way
aNGERY said:
Never used to be this way
Click to expand...
Click to collapse
Been like this since the 8T at least, when OnePlus use Google Update servers instead for incremental.
craznazn said:
Been like this since the 8T at least, when OnePlus use Google Update servers instead for incremental.
Click to expand...
Click to collapse
I went from op7p to this
aNGERY said:
I went from op7p to this
Click to expand...
Click to collapse
Well, if you want up-to-date full zips, go with BA. Otherwise, make the preparations needed for incremental OTA.
DA has been working phenomenally for me. I'm in the US.
I have been using the EU firmware.
It works flawless on Verizon.
I got this update this am and it says unable to download
Dewaynelives said:
I got this update this am and it says unable to download
Click to expand...
Click to collapse
Me too. Are you rooted?
aNGERY said:
Me too. Are you rooted?
Click to expand...
Click to collapse
Yes with magisk
Me too. I'm wondering if that's related. I hid magisk from everything Google play related
aNGERY said:
Me too. I'm wondering if that's related. I hid magisk from everything Google play related
Click to expand...
Click to collapse
Ive did everythign and it still done it
Dewaynelives said:
I got this update this am and it says unable to download
Click to expand...
Click to collapse
Are you using global AA USA version?
netgar said:
Are you using global AA USA version?
Click to expand...
Click to collapse
I am
Dewaynelives said:
I got this update this am and it says unable to download
Click to expand...
Click to collapse
I was running into the same issue. I resolved it by downloading the AA incremental posted on the guide thread and moving it into the root and manually updating. Otherwise I was getting errors. How bizarre.
the bolt of thunder said:
I was running into the same issue. I resolved it by downloading the AA incremental posted on the guide thread and moving it into the root and manually updating. Otherwise I was getting errors. How bizarre.
Click to expand...
Click to collapse
Tried it in twrp but it's not working
LE2125_11.F.18 has been released, but I can't find it in Oxygen Updater. Anyone has the download link?
Yep, just had the notify from Oxygen Updater ! Cheers
yes, it comes,^_^
how to get battery widget on shielf ? oxygenos 13 please
galaxys said:
Yep, just had the notify from Oxygen Updater ! Cheers
Click to expand...
Click to collapse
LE2123 will be the last one to get update.
ElitePotato said:
LE2123 will be the last one to get update.
Click to expand...
Click to collapse
Bummer mate
On F.18 since last night. Battery life seems greatly improved over F.17. Does anyone else notice this?
A small bug seems to have been introduced. The fingerprint unlock fails first time, works second time. Or is it only me?
I feel the battery is better so far, but need a few days more usage...
tathagatab said:
On F.18 since last night. Battery life seems greatly improved over F.17. Does anyone else notice this?
A small bug seems to have been introduced. The fingerprint unlock fails first time, works second time. Or is it only me?
Click to expand...
Click to collapse
Both battery and fingerprint you said, are true in my opinion.
Installing F.18 now, I've got it from oxygen updater. ( LE2123)
I'll report back in the same way
Do you have the fingerprint bug everytime? It seems to work fine for me.
Installed F.18 yesterday, all appeared fine. Then I left the house WiFi for the first time day, and lost internet access. Had to go into Mobile Networks and let it automatically re-select the same APN I had been using. Internet working again.
AndyC76 said:
Do you have the fingerprint bug everytime? It seems to work fine for me.
Click to expand...
Click to collapse
No, it seems to have corrected itself.
AndyC76 said:
Do you have the fingerprint bug everytime? It seems to work fine for me.
Click to expand...
Click to collapse
No bug for me, I did clean install though. Also gaming performance is better on this build.
Any one have the full zip? Wish A13 didn't take away the local upgrade menu.
SaintZ93 said:
Any one have the full zip? Wish A13 didn't take away the local upgrade menu.
Click to expand...
Click to collapse
Local update option is still there, you have to enable developer options. Full zip is available on oxygen updater.
ElitePotato said:
Local update option is still there, you have to enable developer options. Full zip is available on oxygen updater.
Click to expand...
Click to collapse
Wait for real? I have go up and down the developer options and cannot find a setting for it. Also Oxygen Updater is still only showing me F.17 for full zips.
That's because Oxygen updater app doesn't do incremental updates, just full zips.
SaintZ93 said:
Wait for real? I have go up and down the developer options and cannot find a setting for it. Also Oxygen Updater is still only showing me F.17 for full zips.
Click to expand...
Click to collapse
You just have to enable developer options. Then the local update option will be available like this. You will get the F.18 incremental update through oxygen updater after you update to F.17 version.
ElitePotato said:
You just have to enable developer options. Then the local update option will be available like this. You will get the F.18 incremental update through oxygen updater after you update to F.17 version.View attachment 5805065
Click to expand...
Click to collapse
Yeah that 3 dot menu doesn't show up for me with DO enabled. Also you're a different variant and firmware than 2125 so that could be why.