Hi all,
My XDA IIs works well before. But few days ago the Power button doesnt work properly, it can turn on the phone, hold to turn off the back light, but I can't use it to turn my phone screen off like before. Anyone has same problem ?
Can you see any part of the screen? It might just be that the backlight adjustments are set too low when the unit isn't cradled. You might be able to see the screen in daylight.. or maybe it was inside your home. I forgot where I was at when it happened to me. In anycase, if you can see a bit of images on your screen, go into the Backlight properties and change the setting to your liking.
Good luck..
The problem is i can just press the power button to turn off my phone BEFORE (the screen is completly off), and NOW it doesnt work at all ! When my phone was off, I can press the Power button to turn it on, or when I hold it for few seconds the back light will be turned off, but press once to turn off. I dont know why, if somthing wrong with the Power button it should be doesnt work at all, that's mean i cannot turn on my phone as well. But other functions of the Power button are still work well, except the 'Turn off' :roll:
power off doesn't work anymore
I have the same problem here. I can't use the power button to power off my qtek 9090!!
i can use the power button to turn my pda on and to switch the background light on and off - so the "hardware side" of the power button is working.
however, i can't use the power button to turn off the device. it's very annoying, because i can't put it in my pocket after finishing a call :-(
this should be some sort of a software problem - so i hard resetted my device (a couple of times) - but that didn't help!
can anyone help?
thanks,
lorenz
the ba doesn't turn off it is always on staand by mode. ->settings -> system -> button lock
this will stop any missed call because when the ba is in standby the power button is the only one to work
power on is no problem. i can't put my BA into standby mode. if i press the power button while the BA is turned on, nothing will happen. the screen will stay on, the background light stays on.
i have no way to put it into stand-by with the power button!
try this and see if it works. it's a software app that wil rest, shut down, and turn the screen off. just copy it to your BA temp directory and install it.
power button problem
nemchua
Is your problem solved ?
Because I have the same problem.
Power of switch doesn't work !!!
Any help would be welcome.
power button problem
Does anyone solve the problem???
Had the same problem...
I had the same problem going on for about two weeks or so...never changed anything and it went away all by itself.
The problem has not come back now in over 4 months.
Sure would love to know what the problem was tho...
Greetings,
Noddy
Power Off does not work
Add my name to people with this problem.
The only event I can link it to is this: I deleted my Motorola Bluetooth headset and installed a Logitech headset. I noticed the problem (can't turn OFF with POWER BUTTON) soon after that.
same problem for me ..... someone must know !!!!
I think it is a hardware problem. The contact is not making cleanly. Disassemble and spray time, perhaps.
It's a standard push switch, easy enough to replace, I occasionally list themon ebay but any phone repairier should have them in stock.
Richard
i had same problem yesterday afternoon, but it is ok now. recovered by himself
Write again in two weeks and let us know if it is still healthy. In my case, anintermittent problem became continuous.
Can't turn the screen on after pressing power button
I have a problem with my Bell Atrix. After pressing power button to lock the screen, i can't wake up the screen up by pressing that button again. Could anyone tell me how to fix it pls.
Hi,
I have a Blue Angel (XDA IIS) that has been flashed with WM6.1. I have been using it for a few years until recently that I got this weird problem.
While the phone is idle, suddenly the volume increases automatically by itself, as if some one pushes the volume slider up, and keeps pushing it. As a result, the speaker keeps beeping as the volume already hitting the max.
After awhile, it will then stop. For a short while later, it starts again. While this is happening, I cant turn off the phone using the power button on the top. But I can turn off the backlight by doing a long-press.
I have tried to reflash the firmware and also did a hard reset, but it doesnt solve the problem.
Anyone has encountered this weird problem? The buttons seem to work fine when not in that weird condition. If it is not software problem (since I reflashed it) and hardware (buttons work fine in normal situation), what else could it be?
Any idea anyone? Really appreciate some advice.
Rgds,
CH
Hi Guys,
Recently my screen has stopped working. The screen remains black but I know the phone is still working because when I press the power button the menu buttons light up. I am able to fix the situation temporarily by doing a soft reset, holding down power button for 10 seconds, and screen will turn on, but later my phone screen stops working again.
BTW I am on Android Revolution HD 9.7.2
Do any of you guys know what I should do?
Thanks.
DarkyHero
RE
kartik50 said:
Hi Guys,
Recently my screen has stopped working. The screen remains black but I know the phone is still working because when I press the power button the menu buttons light up. I am able to fix the situation temporarily by doing a soft reset, holding down power button for 10 seconds, and screen will turn on, but later my phone screen stops working again.
BTW I am on Android Revolution HD 9.7.2
Do any of you guys know what I should do?
Thanks.
DarkyHero
Click to expand...
Click to collapse
Sounds like an bad display...try to get it to service if u still have a warranty
I think it could be related to your custom rom. You should try a different rom or go back to stock rom before sending your hox to repair. If screen is booting up properly when you did a soft reset, it sounds more like a software problem for me than a hardware one.
ok so here is the rundown
Device: HTC one on vzw
Rom: Slimbean 2.x
Gapps: Slim AIO gapps
had a weird problem with the display today if anyone has had this or know someone who has i would greatly appreciate the help. I just flashed Slimbean 2.x last night and all was good. no problems what so ever, got everything setup and was working fine. this morning around 10am i opened snapchat to view a video. i clicked on the video and as soon as it started the screen went blank and would not turn on. i tried holding the power button down for at least a minute and nothing. also tried power and volume down, power and both volume buttons, power and volume up and still nothing seems to work. when i plug it into the wall charger the red LED light does not turn on and screen does not wake. when i plug it into the computer the computer does not ever read the device and noting pops up letting me browse the files on the phone. i have no clue why this happened it has been working fine for the 3 months that i've had it. took it to verizon about an hour ago and they didn't know either but they are sending me a replacement htc one. all i really want now are my photos that i have on the phone.
does anyone have any ideas about what i could do?
thanks
I had something similar and think it was conflict related. After installing the "advanced power menu" with xposed, I had an issue when trying to use it to boot into recovery. Basically it had timed out and then went away without rebooting. The next time I tried it locked up and my screen went black. My keys would light up if I clicked on the power button (it was dark in the room so the sensor was still working), but nothing else. Nothing I did would make the screen turn on at all and holding down the power key to reboot did not work. I just planned on letting the battery die out. After about 45 minutes, the phone just rebooted and everything was back to normal. I really think it locked up due to a conflict similar to what a PC might do.
Hello, a few hours ago my Nexus 7 suddenly started acting as if I was continuously pressing the volume down key. I could not even power down. Thinking I got a nasty software bug, I installed an app from play that let me reboot. It immediately rebooted into recovery though, just as if I had been holding down the volume key while it booted.
I have slimkat installed with twrp v2.7.0.0. I installed a recovery from before the skimkat installation (stock with root and twrp). But it too rebooted into twrp again (as if I was tapping volume down while it rebooted). So I tried to reboot into the bootloader to see what that would do (it allows you to use the volume keys to make selections). I got to the bootloader and sure enough, it was cycling through the options like I was tapping volume down over and over.
Help? Any ideas? I have pulled off the back cover and cleaned around the volume and power keys. It does not appear anything is wrong with them. Is it a software issue? Hardware? Any help would be appreciated.
Ok just one update on this issue. I think this is likely a hardware issue. I managed to disconnect the side key cable for the volume and power keys while it was booting, and it booted up just fine.
I am not sure what is wrong with the keys, but the fact that the tablet will boot into system when they are not attached tells me I probably need to replace them. Just FYI for the unlucky person who might also behaving this problem.
I am also experiencing volume problems. Mine is software related I think. The problem I have is that all volume and sound will disappear as if I have muted all sound. I have no touch sounds, no YouTube sound, no music audio, nothing at all from the speakers or the headphone jack. A reboot will fix it, but after say 10 minutes of use the sound goes again. The volume controls do nothing. Completely stock 4.4.3.
Does anyone else have this issue?