Development [13][ROM][sGSI][CWAI+][Exynos2200] Pixel Experience Plus

Development [13][ROM][sGSI][CWAI+][Exynos2200] Pixel Experience Plus - Samsung Galaxy S22

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pixel Experience Plus "s"GSI
DISCLAIMER
I am not to be held responsible for any damage that might come to your device while trying to install or using this rom. This is your own responsibility.
What is this?
Pixel Experience is an AOSP based ROM with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Their mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 13
What makes these builds different from other GSIs and especially, what makes it different from the already-existing PE GSI builds?
- Fixed Auto-Brightness
- Fixed the microphone in video recording by default
- Fixed Adaptive Refresh Rate
- "Fixed" the green tint in low-lit environments by enforcing 120Hz during those times
- AOD is enforced to use the lowest available refresh rate
- Added MIN/MAX Refresh Rate options within Phh Settings
- Reverted the QS look to the actual Pixel one
- S22-relevant settings in Phh Settings are enabled by default
What is working?
Everything not listed under broken things.
What is NOT working?
- WiFi Direct
- 5G
- VoLTE
Known issues
- proximity sensor (it works - the screen will lock if you put the phone near your face while in a call but you have to wake the phone yourself afterwards)
- WiFi Hotspot (it has been fixed in the latest release of Loki kernel)
- RIL signal occasionally misbehaves once after a couple reboots(keep toggling airplane mode until it goes back to normal, this is a general TD GSI issue ATM and you have to do this once per boot in the rare cases when it does occur)
- Video recording is capped at [email protected] (thank Samsung for this)
Instructions
If you're new to this, visit THIS LINK
For the front camera to work in Google Camera ports, it's advised to flash the CWAI firmware or newer.
Do keep in mind that with that firmware (or BVJA, which was before CWAI), Samsung added anti-rollback so you won't be able to downgrade to A12.
1. Extract the .xz file
2. Reboot into recovery
3. Perform a Factory Reset
4. Boot into fastboot (you need a patched recovery for this, follow THIS GUIDE
5.Flash the extracted image with fastboot: fastboot flash system image.img
6. Reboot
Download
Github
MEGA Mirror
Add-ons
LOKI KERNEL
GCam 8.4 port by Shamim
1. Download the apk from HERE
2. Download the .xml config from HERE and copy it to /sdcard/SGCAM/XML (Thanks to Es Jot for the config)
3. Download the lib from HERE and copy it to /sdcard/SGCAM/LIB
4. Install the .apk, double-click between the shutter and gallery icons
5. Import the config
AGC Camera
1. Download the apk from HERE
2. Download the configuration from HERE
3. Install the apk
4. Import the config by choosing More Settings > Configs > Import
5. Go back to the camera view, press the top arrow and choose Load Config
Telegram
Samsung Galaxy S22 Exynos GSI Group
Translation
Help with project translation
Blog
Pixel Experience
Donate
jhenrique09
phhusson
AndyYan
eremitein
kdrag0n
ponces
Build author: Jeik
Source code: PixelExperience
Device source code: device_phh_treble
ROM developer: jhenrique09
Contributors: Pixel Experience Team, phhusson, AndyYan, eremitein, kdrag0n and ponces

thanks for your work！but i am wondering that does it work on snap？

It's nice, but mobile network keep disconnecting and Bluetooth audio don't work

yzuunk said:
It's nice, but mobile network keep disconnecting and Bluetooth audio don't work
Click to expand...
Click to collapse
okay，can this problem be fixed？i want，to use gsi on my s22 snap daily

yzuunk said:
It's nice, but mobile network keep disconnecting and Bluetooth audio don't work
Click to expand...
Click to collapse

New build up.
Changes:
- BT audio should now work fine
For those on the previous build and with the mentioned issue, toggle the following option within Phh Settings > Misc

Jeik said:
New build up.
Changes:
- BT audio should now work fine
For those on the previous build and with the mentioned issue, toggle the following option within Phh Settings > Misc
View attachment 5895743
Click to expand...
Click to collapse
hey，nice to see you，does this rom work on snap s22?

Loving this rom

Daniel Dumile said:
Loving this rom
Click to expand...
Click to collapse
I love this very much,just do not know whether it works on my snap s22

huahuaa said:
hey，nice to see you，does this rom work on snap s22?
Click to expand...
Click to collapse
It will maybe boot but the fixes are pretty much exclusive to the Exynos variant of the S22, meaning you'll have the exact same bugs as you'd have with any other GSI if you flashed it on your SD variant.
In any case, I have absolutely no plans to try making it work on SD variants.

What a shame, but thanks to developers like you for their hard work, I just hope someone can do it, I can help test the system related issues, and I can also provide some donations, though not much

Jeik said:
It will maybe boot but the fixes are pretty much exclusive to the Exynos variant of the S22, meaning you'll have the exact same bugs as you'd have with any other GSI if you flashed it on your SD variant.
In any case, I have absolutely no plans to try making it work on SD variants.
Click to expand...
Click to collapse
What a shame, but thanks to developers like you for their hard work, I just hope someone can do it, I can help test the system related issues, and I can also provide some donations, though not much

How would one root with magisk ?

Hello !
I installed via Odin the Stock Rom "S901BXXS4CWD3_S901BOXM4CWCH_EUX" (latest for Europe).
Patch Recovery.img and install IMG via fastboot, and I have a bootloop, any idea?

sHnouL said:
Hello !
I installed via Odin the Stock Rom "S901BXXS4CWD3_S901BOXM4CWCH_EUX" (latest for Europe).
Patch Recovery.img and install IMG via fastboot, and I have a bootloop, any idea?
Click to expand...
Click to collapse
ya Must after Flash Recovery at First start Boot in Recovery so ya can Wipe Userdata and then ya can Start the System!!! Hope It helps, when not ya must Flash StockROM and Try Again!!And when ya Patch Recovery IMG ya must start Recovery Mode to have Root Rights in System, and than ya have no Recovery!!!

Pixel Experience Team, phhusson, AndyYan, eremitein, kdrag0n and ponces Nice work Guys!!! when ya have the Time can ya Build a LineageOS 20 GSI? or is anybody so nice a Beginner in Szenario Building GSI/ROMs the manifest*.xml make Public than i have Found nothing!!! So the Tutorial on XDA is uncomplete to Build a ROM!!!

New build up.
Changes:
- May security patch
- latest TrebleDroid changes
- offline charging seems to work now (confirmed on base S22, CWAI fw, latest Loki kernel)

Related

[ROM][UPDATE][10.0][JOYEUSE][UNOFFICIAL] Pixel Experience [AOSP][2020/09/15]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for [Joyeuse]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 10.0
Whats working?
Wifi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FMRadio
Fingerprint reader
Face unlock
NFC
Lights
Sound / vibration
Known issues
Nothing yet
You tell me
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download
Donate
Liked my work? Give me a beer
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Android OS version: 10.0.0_r41
Security patch level: August 2020
Build author/Device Maintainer: id.agung17
Device Source code: [url]https://github.com/PixelExperience-Devices[/url]
Source code: [url]https://github.com/PixelExperience[/url]
Kernel Source code:
[url=https://github.com/erfanoabdi/android_kernel_xiaomi_sm6250[/url]
[*]ROM Developer:
[url]xda-developers.com/member.php?u=6519039]jhenrique09

- intial build For joyeuse
Date 15/09/2020
Device Side :
- September Security Level
- power-libperfmgr: adapt and rebrand for xiaomi_sm6250
- Introduces Sonic Kernel prebuilt
- Update Wireguard Lastest
- Build wiht Proton Clang 12.0 Version
- uv cpu 80mv kernel
- uv gpu 80mv kernel
- Enable fluence for audio/voice recording
- powerhint: Rewrite apt values for sm6150
- virtualKeyVibePattern
- enable VoLTE and VoWIFI for all
- Disable SBC HD audio dual channel support by default
- Add CameraGo Prebuilt
- Introduce 'SafailNet'
- Switch to walleye oreo build fingerprint
- Cts passed by default (without modules) (need Test)
- Playstore Certified by default (without modules) (need Test)
- Rebase Tree
- Spesifik Tree Not Miatoll Tree
- improved Turbo Charging Up
Note :
- Use Pbrp
- Format Data
Bugs :
- NFC DIE I DONT HAVE TIME FIX IT SORRY !!
Page One Download

VoLTE supported and shows up on status bar?

berci-- said:
VoLTE supported and shows up on status bar?
Click to expand...
Click to collapse
yes sir

id.agung17 said:
yes sir
Click to expand...
Click to collapse
Thank you, hopefully you got something promising for me, considering the small amount of development for joyeuse. :silly:

Really awesome to see a great ROM like this being built for joyeuse.

Installation guide? Tnx btw.
Sent from my MI 3W using Tapatalk

What about voice phone unlock? If i say "ok google" while phone will be locked with black screen... will it wake up?

id.agung17 said:
yes sir
Click to expand...
Click to collapse
So far so good, VoLTE icon doesn't show up, but it's working in a call.
Good job.

berci-- said:
So far so good, VoLTE icon doesn't show up, but it's working in a call.
Good job.
Click to expand...
Click to collapse
next build iam fixed it

id.agung17 said:
next build iam fixed it
Click to expand...
Click to collapse
No worries, take your time.

Thanks for the rom. Please, how to install instructions.

Installation step same with rr rom?

Unfortunately not working for hours
Sorry, you can't view or download this file at this time.
Too many users have viewed or downloaded this file recently. Please try accessing the file again later. If the file you are trying to access is particularly large or is shared with many people, it may take up to 24 hours to be able to view or download the file. If you still can't access a file after 24 hours, contact your domain administrator.
Click to expand...
Click to collapse

I installed the latest Stable version from the pixel experience website on my Curtana and for some reason, I can't get apps to get into full screen mode. When I'm watching netflix or prime video, the display doesn't wrap around the notch. But the weird thing is, Youtube and Google photos do go into full screen mode with wraparound the notch. Can someone please help me with this or tell me a way to get this to the maintainers of the project?
Thanks

amanisthebest said:
I installed the latest Stable version from the pixel experience website on my Curtana and for some reason, I can't get apps to get into full screen mode. When I'm watching netflix or prime video, the display doesn't wrap around the notch. But the weird thing is, Youtube and Google photos do go into full screen mode with wraparound the notch. Can someone please help me with this or tell me a way to get this to the maintainers of the project?
Thanks
Click to expand...
Click to collapse
you mean hidden notch?

fajar rinda said:
Installation step same with rr rom?
Click to expand...
Click to collapse
yes sir same with RR

NFC is greyed out

First of all i really to write into to this topic. I'm bout to buy this phone and don't want to take a wrong one. I only have to questions:
1) Joyeuse is the version that the black area covering the cameras is shorter than note 9s( Curtana ) version which also does not cover the flashlight. And the back of this version has some fiber texture (about 2/3 of the whole back of the phone) that seperate the color ( a little like panda 2 tone color Google pixel 2 ). Is that correct ?
2) Could you give me a link to the twrp topic of Joyeuse? Since this version isn't seperated to other version, i find it really hard to find one.
I'm really sorry to write into this topic. And thank you very much !

I tried to install with that TWRP
full wipe
install ROM
and when i tried reboot system it send me back to TWRP.
Edit: SOLVED

[ROM] [11] STATIXOS 4.0 for Redmi Note 9S [UNIFIED] [18/11/20]

StatiXOS 4.0 for the Redmi Note 9S/Pro/Pro Max/Poco M2 Pro
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Changelog:
- Switch to QTI Bluetooth Stack
> Fixes BT Audio
- Switch to OSS hals
> Fixes WFD
- Fix ok google
- Revert buggy experimental UI changes
- Add StatiXOS bolt in about page
- Convert global actions to translucent overlay with blur
- Kernel Upstream
- Source Upstream
- Enable press power button to unlock (instead of touching the fingerprint sensor)
- Update telephony to LA.UM.9.1.r1-07000-SMXXX0.0
- Enable telephony injection
- Update ims
Download
GAPPS ARE INCLUDED
Bugs:
WFD
You tell me
Karmel sources
Have fun!

Nice job sar
Would you please share some SCS

Amazing rom
Tnx for your hard working ?

Great work tyvm for first a11 ROM for our phone ?

amirizad_7436 said:
Nice job sar
Would you please share some SCS
Click to expand...
Click to collapse
Yes, just a sec I'll upload them ASAP
Edit: I couldn't upload them. I'd be honest and say why but I know it would get deleted for "violating the rules". If someone could upload screenshots for me I'd appreciate it.

THANK YOU DEV
Always a pioneer
First android 10 on Vince, first Android 11 on Curtana
KUDOS

is this a miatoll ROM? I own a Joyeuse

PaulDnoOb said:
is this a miatoll ROM? I own a Joyeuse
Click to expand...
Click to collapse
Joyeuse is the only miatoll device that doesn't work as expected for this rom.

Good job Dev, thanks
btw; proximity fix and we'll have a daily driver

Hey guys I still can't upload screenshots, if anyone would be able to do it for me I'd appreciate it

_4PERTURE_ said:
Hey guys I still can't upload screenshots, if anyone would be able to do it for me I'd appreciate it
Click to expand...
Click to collapse
Hi @_4PERTURE_ I made a screen recording of StatixOS and uploaded it on YouTube. Hope this helps.
For some reason my F2FS /data partition cannot be properly detected by Lineage Recovery and I was initially unable to install. I reverted to TWRP, changed /data to EXT4, returned to Lineage Recovery and the install worked. But it might not have been the reason for working because according to Device Info HW, /data is still F2FS.
I cannot get into the Styles and Wallpaper menu.
Thank you for your hard work!

oh looks good. about to a daily driver.
anyway, is it not possible to flash the rom through twrp?

bawitdol said:
oh looks good. about to a daily driver.
anyway, is it not possible to flash the rom through twrp?
Click to expand...
Click to collapse
As Q was at this stage and needed special twrp this rom is like it too
It should just goes some moth to update twrps to flash all R rom with them
Until a further notice you should use that twrp

_4PERTURE_ said:
Hey guys I still can't upload screenshots, if anyone would be able to do it for me I'd appreciate it
Click to expand...
Click to collapse
There are watermarks of a forum page, but still gives a clue.

carlshark said:
Hi @_4PERTURE_ I made a screen recording of StatixOS and uploaded it on YouTube. Hope this helps.
For some reason my F2FS /data partition cannot be properly detected by Lineage Recovery and I was initially unable to install. I reverted to TWRP, changed /data to EXT4, returned to Lineage Recovery and the install worked. But it might not have been the reason for working because according to Device Info HW, /data is still F2FS.
I cannot get into the Styles and Wallpaper menu.
Thank you for your hard work!
Click to expand...
Click to collapse
thanks for the video, it certainly give us a good heads up.
Have you tried in developers options:
windows animation scale
transition animation scale
and
Animator duration scale
all these three to set to 0.5 x and see if it gets even smoother and scroll much faster?

logosA said:
thanks for the video, it certainly give us a good heads up.
Have you tried
and see if it gets even smoother and scroll much faster?
Click to expand...
Click to collapse
I tried and it does get smoother and scroll much faster, which is the direct effect of adjusting those values anyway. I can say with confidence though that coming from MIUI and other ROMs like Pixel Experience/PE +/crDroid/EvolutionX/ion OS there is no discernible difference in smoothness and scroll speed.

Hi, first of all thank you so much for making this ROM, having a fully functional Android 11 ROM within days of the Android 11 Launch is amazing! Something I noticed though, is that whenever I try to mount /System and flash the Magisk zip file, when I reboot the Magisk app says that Magisk is not installed. Is there a fix?

Yoss Roness said:
Hi, first of all thank you so much for making this ROM, having a fully functional Android 11 ROM within days of the Android 11 Launch is amazing! Something I noticed though, is that whenever I try to mount /System and flash the Magisk zip file, when I reboot the Magisk app says that Magisk is not installed. Is there a fix?
Click to expand...
Click to collapse
Are you using magisk canary?

_4PERTURE_ said:
Are you using magisk canary?
Click to expand...
Click to collapse
Ah, no, should I be?

An update has been pushed, enjoy!
Changelog:
- Fix IMS/VoLTE
- Switch to Pixel FP
- Switch back to regular SElinux and enable SElinux enforcing
- Fix proximity sensor bug (thanks to @wight554)
- Enable multi-color assistant trigger animation
- Remove google search bar from quickstep
- Force full screen on legacy apps
- Maybe other **** I might have forgotten
Download:
https://sourceforge.net/projects/ap...20200922-0436-11-v4.0-UNOFFICIAL.zip/download

[ROM][11][S10e/S10/S10+] PixelExperience Plus [AOSP]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience Plus for S10e/S10/S10+
What is this?
PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 11
Whats working?
- Wifi
- Sound
- mali drivers
- USB tethering
- Video Playback
- Fingerprint Sensor
- Ril (Mobile data,calls, sms and stuff)
- Sensors
- Bluetooth
- Wifi HotSpot
- MTP
- 2D and 3D gpu acceleration
- HW encoding/decoding
- GPS
- Cameras (All of them)
- HWcomposer (HWC)
- Signal indicator
- Double tap to wake
- Wireless PowerShare
- Face unlock
Known issues
VoLTE/VoWifi (due to Samsung's proprietary implementation)
You tell me
DON'T FLASH GAPPS, THEY'RE ALREADY INCLUDED
Download for S10e
Download for S10
Download for S10+
To install Magisk on this rom, follow the link here for instructions
Donate
Liked my work? Give me a beer
Translation
Help with project translation
Stay tuned
Our Telegram channel
Our blog
Android OS version: 11.0.0_r32
Security patch level: March 2021
Build author/Device Maintainer: turbolukex5
Device Source code: https://github.com/ivanmeler/android_kernel_samsung_beyondlte/
Source code: https://github.com/PixelExperience
ROM Developer: jhenrique09

Is safetynet passed by default , or is Magisk needed to pass it ?

I've been waiting for a long time, thank you very much. It would be great if it was official too
Edit: offline charging is not working for me :/

ILOIVE said:
Is safetynet passed by default , or is Magisk needed to pass it ?
Click to expand...
Click to collapse
Passed by default

OMG OMG THANKS SO MUCH!!!!!!!

offline charging is not working for me too... in any AOSP based rom for S10e
kullanici32 said:
I've been waiting for a long time, thank you very much. It would be great if it was official too
Edit: offline charging is not working for me :/
Click to expand...
Click to collapse

Wondering if dirty flash is OK over 2021-01-09 version?
Edit: Yeah, works fine for now at least. Made a full backup before.
Don't forget this link for magisk patched boot .img
beyond - Google Drive
drive.google.com

Oh my goodness, I just have to comment on this... thanks for this update.

UsernameNotRecognized said:
Wondering if dirty flash is OK over 2021-01-09 version?
Edit: Yeah, works fine for now at least. Made a full backup before.
Don't forget this link for magisk patched boot .img
beyond - Google Drive
drive.google.com
Click to expand...
Click to collapse
Added link to Magisk instructions to OP, thanks for making me aware.

kullanici32 said:
I've been waiting for a long time, thank you very much. It would be great if it was official too
Edit: offline charging is not working for me :/
Click to expand...
Click to collapse
etx40jtfnrh61 said:
offline charging is not working for me too... in any AOSP based rom for S10e
Click to expand...
Click to collapse
It is indeed a known problem that Offline Charging isn't available, once the developer of the LineageOS ROM finds time to implement this, I will most certainly include it in this and other ROMs too.

Hey
thank you soo much! I've been using an OP7t but now I'm actually thinking of giving another chance to the Samsung.
Mind someone giving some help on root and magisk please? Last time I rooted was 5 years ago
Basically, I rooted on stock and I have had magisk working. Then I followed this: https://forum.xda-developers.com/t/...-0-x-twrp-for-galaxy-s10-e-5g-exynos.4180287/ to have twrp and installed this pixelexperience rom. How do I get magisk with hopefully the security working (with the proper config and patches). I found this file: https://drive.google.com/drive/folders/14LgOP_7B_N55FR2_v4pBce_lLU7aNu-M however it's unclear to me which one is for my version (s10+ SEE Europe edition). I get I have to use it as a base for magisk patching (right?) but I just don't get which one?
Thanks
My bad, got the idea...

hmm
how to get the fingerprint working properly? does it involve the CLI tool provided in magisk or it should work natively?

problem_child said:
Hey
thank you soo much! I've been using an OP7t but now I'm actually thinking of giving another chance to the Samsung.
Mind someone giving some help on root and magisk please? Last time I rooted was 5 years ago
Basically, I rooted on stock and I have had magisk working. Then I followed this: https://forum.xda-developers.com/t/...-0-x-twrp-for-galaxy-s10-e-5g-exynos.4180287/ to have twrp and installed this pixelexperience rom. How do I get magisk with hopefully the security working (with the proper config and patches). I found this file: https://drive.google.com/drive/folders/14LgOP_7B_N55FR2_v4pBce_lLU7aNu-M however it's unclear to me which one is for my version (s10+ SEE Europe edition). I get I have to use it as a base for magisk patching (right?) but I just don't get which one?
Thanks
My bad, got the idea...
Click to expand...
Click to collapse
If you have everything setup you just need to flash the proper .img to your boot partition.
That's it.
You need beyond2LTE.
Don't use magisk patching, I tried to update it through that and after my phone didn't boot. Fixed that with the .img in the link.
problem_child said:
hmm
how to get the fingerprint working properly? does it involve the CLI tool provided in magisk or it should work natively?
Click to expand...
Click to collapse
It works natively for me with the S10+.

UsernameNotRecognized said:
If you have everything setup you just need to flash the proper .img to your boot partition.
That's it.
You need beyond2LTE.
Don't use magisk patching, I tried to update it through that and after my phone didn't boot. Fixed that with the .img in the link.
It works natively for me with the S10+.
Click to expand...
Click to collapse
the trick is not to long press the fingerprint
Aslo, I've read through the telegram channel that actually one should setup using the CLI - but only if it's not working (telegram of Ivan Maler - lineagOS 18.1 dev).... There are a lot of helpful hints there btw.
ok, are there some culprits as to when is magisk working after reboot? seems I have lost root in along the way.

Can anyone else confirm whether the Bixby button works or not? And also, is there a setting somewhere (or a workaround) to force some apps and games to utilize the full screen including the notch area as in stock One UI? (I heard that there was a setting for this in Developer's Options, but haven't been able to find anything so far)
PS. Solid ROM BTW, updated from Pixel Experience Beta. Been using that one as my daily driver since January, and now updated to this one.

How do I get GPay to work? Do I need Magisk for it?
Edit: safety net doesn't pass by default for me for some reason

monkeymechanic said:
Can anyone else confirm whether the Bixby button works or not? And also, is there a setting somewhere (or a workaround) to force some apps and games to utilize the full screen including the notch area as in stock One UI? (I heard that there was a setting for this in Developer's Options, but haven't been able to find anything so far)
PS. Solid ROM BTW, updated from Pixel Experience Beta. Been using that one as my daily driver since January, and now updated to this one.
Click to expand...
Click to collapse
I think you mean the display cutout settings. I don't think they work to do that though. I think there is no way to force full screen unless you use Samsung ROMs. It's up to the app developers to do it themselves.

hey
does anyone have problems booting and rebooting the phone? Basicaly mine is stuck with a black screen. The only way I can get SOME signs of life is to boot it using the volume-downd + powerkey combination and then volume-up, bixby and power to get to twrp bootloader. From there I select reboot to system but nothing happens.
I thought that the reboot was somewhat klunky with magisk but I really didn't learn the trick yet. I appreciate any advice.
thanks

Google assistant is not working on the bixby button
Even configuring still not working

Hi all,
Is there an easy way to get off the BETA pixel experience onto this one, if I have magisk flashed?

[ROM][UNOFFICIAL][MONTHLY][EAS][R-HALs] Pixel Experience 13 [NORMAL/PLUS] for Xiaomi Mi5

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelExperience for Xiaomi Mi 5 [Gemini]
What is this?
Pixel Experience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, bootanimation)
Our mission is to offer the maximum possible stability and security, along with essential features for the proper functioning of the device
Based on Android 13.0
Whats working?
Wifi
Wifi hotspot
RIL
Mobile data
GPS
Sensors
Camera
Flashlight
Camcorder
Bluetooth
NFC/GPAY
Lights
Sound / vibration
Fingerprint
WiFi Display
VoLTE
Double Tap To Wake
Buttons swap
Google Voice Match
SELinux enforcing
Safetynet
DON'T FLASH GAPPS, ALREADY INCLUDED
Download standard version from Android File Host
Download PLUS version from Android File Host

Flashing Instructions:
Pre-installation:
Pixel Experience Recovery (Download from here)
First time installation:
Fastboot or flash recovery image
Reboot to new recovery
Click on Factory Reset --> Format data/factory reset
Click on apply update and sideload the zip file or install it using an USB OTG
Enjoy
About Camera App: default camera app is GCAM version SGCAM_8.4.400.42.XXX_STABLE_V35 by Shamim. Everything works fine except 240 fps (1/8) slow motion videos
mandayugana shared his config xml file, which add the specific noise model for Gemini with Shamim GCAM, dowload it from my Github (sgcam-8.4-v35-pe13.xml) or from his post, apply to GCAM following this tutorial and say thanks to him for his great work
XDA:DevDB Information
Pixel Experience, ROM for the Xiaomi Mi 5
ROM OS Version: Android 13
ROM Kernel: Linux 4.4
ROM Firmware Required: MIUI V10.2.2.0.OAAMIXM as minimum target
Based On: AOSP
Source Kernel repo: Link
Gemini device tree repo: Link
Xiaomi msm8996-common repo: Link
Vendor repo: Link
Special thanks to
LineageOS
Pixel Experience
Shamim
xNombre
mandayugana

I'm currently using PixelExperience_gemini_12.1
Is it possible to directly update it via twrp? (I don't have a PC to install PErecovery)

ademuhamad said:
I'm currently using PixelExperience_gemini_12.1
Is it possible to directly update it via twrp? (I don't have a PC to install PErecovery)
Click to expand...
Click to collapse
I haven't tried but could work. Just be sure to format internal storage before rebooting into system

the rom is very laggy, and cpu usage between 50%-100% with nothing open :/

Echidna_Kawaii said:
the rom is very laggy, and cpu usage between 50%-100% with nothing open :/
Click to expand...
Click to collapse
Check what process is eating your cpu in the background, i have no problems at all with cpu usage on screen and with deep sleep

and also this giving Random reboot here :/

Echidna_Kawaii said:
and also this giving Random reboot here :/
Click to expand...
Click to collapse
No one reported random reboots, i never had once in a week of usage. Logs or never happened

-+BB+- said:
I haven't tried but could work. Just be sure to format internal storage before rebooting into system
Click to expand...
Click to collapse
ERROR:1 )l

暗夜很无语 said:
ERROR:1 )l
Click to expand...
Click to collapse
That's why I wrote could, I haven't tried and there are multiple versions of TWRP, if you experience problems flashing the ROM use my recovery

pretty much very stable rom... working everything very smothly...but one issue...after usung 1 or 2 shot with gcam its freeze the cam...and then can't open the gcam anymore...

Unfortunately I can't install it. It would be great if there was a zip file that can be installed with twrp. Thanks for your effort anyway.

after using 2-3 days.. i found some bug
1. after activated vibration mode no vibration icon showing in status bar
2. gcam not working (tried many version)
and after some times phone autometically try to reboot itself but stuck at mi logo.. have to forcefully tap on power button to reboot manually (happened every time i install different version of gcam) i had same issue in lineageOS 19
3. no ota updater option (maybe because its unofficial or i don't know)
4. don't have the option double tab on status bar area to lock screen
5. not showing am/pm in time

İST1907 said:
Unfortunately I can't install it. It would be great if there was a zip file that can be installed with twrp. Thanks for your effort anyway.
Click to expand...
Click to collapse
Could you please post the log of the error during the flash?
mrinfinity0007 said:
after using 2-3 days.. i found some bug
1. after activated vibration mode no vibration icon showing in status bar
2. gcam not working (tried many version)
and after some times phone autometically try to reboot itself but stuck at mi logo.. have to forcefully tap on power button to reboot manually (happened every time i install different version of gcam) i had same issue in lineageOS 19
3. no ota updater option (maybe because its unofficial or i don't know)
4. don't have the option double tab on status bar area to lock screen
5. not showing am/pm in time
Click to expand...
Click to collapse
1 and 5 are AOSP/PE bugs, hopefully will be fixed in QPR2 release
2 don't use Gcam for now, i've fixed hdr+ photos on recent Gcam version in my internal builds but it's still crashing causing a reboot after a minute, i had no time to inspect yet because i was focused on EAS and power HAL port
3 correct, no OTA update app on unofficial builds
4 i'm not 100% sure but if i remember well it's a feature of plus version

@-+BB+-
Thanks for sharing your Mi5 rom with us.
Since Android 12 the Mi5 phone is missing a working TWRP recovery, with support of the fbe encryption. This prevents many users from trying all the new roms, because there is no way to take full backups.
Can you tell me what is the reason?
I would be glad to help the development, but I don't know where to start. If I had someone who can guide me in the process I could do my part. Being part of a team would be ideal.

JackSlaterIV said:
@-+BB+-
Thanks for sharing your Mi5 rom with us.
Since Android 12 the Mi5 phone is missing a working TWRP recovery, with support of the fbe encryption. This prevents many users from trying all the new roms, because there is no way to take full backups.
Can you tell me what is the reason?
I would be glad to help the development, but I don't know where to start. If I had someone who can guide me in the process I could do my part. Being part of a team would be ideal.
Click to expand...
Click to collapse
Unfortunately Pixel Experience doesn't support natively TWRP compiling, and i don't have space on my NVME for another build enviroment. Also as far as i know they did not release yet an Android 13 recovery, they are working right now on it, but i don't know if works. Do you know if TWRP supports FBE on other devices? if TWRP supports FBE then best thing would be compile TWRP in an Android 12 build enviroment with a 4.4 kernel with FBE support. you can use my repos or los repos, it' the same. The only requested changes are a makefile with a basic conf for mi5 and convert the fstab in a compatible version for TWRP
@mrinfinity0007 not fixed yet but probably i've understood what's happening... Could you please try to put selinux in permissive mode and use the camera? You can do with adb:
Code:
adb root
adb shell setenforce 0
adb shell getenforce
The last command checks that selinux is correctly disabled, the output must be 0 or permissive

@-+BB+-
Thank you. Yes, from what I see TWRP supports FBE and A12 on other devices.
But I guess that porting it on our device is not that easy as one could think.
My problem is finding detailed guides to start understanding the process, or at least having a overall view.
Anyway I don't want to post too many OT messages on your thread.

-+BB+- said:
That's why I wrote could, I haven't tried and there are multiple versions of TWRP, if you experience problems flashing the ROM use my recovery
Click to expand...
Click to collapse
Let me try another TWRP version

-+BB+- said:
@mrinfinity0007 not fixed yet but probably i've understood what's happening... Could you please try to put selinux in permissive mode and use the camera? You can do with adb:
Code:
adb root
adb shell setenforce 0
adb shell getenforce
The last command checks that selinux is correctly disabled, the output must be 0 or permissive
Click to expand...
Click to collapse
i don't root my phone? does it work without it?

JackSlaterIV said:
@-+BB+-
Thank you. Yes, from what I see TWRP supports FBE and A12 on other devices.
But I guess that porting it on our device is not that easy as one could think.
My problem is finding detailed guides to start understanding the process, or at least having a overall view.
Anyway I don't want to post too many OT messages on your thread.
Click to expand...
Click to collapse
I will take a look this weekend and let you know because I don't remember where but I'm pretty sure that I read a tutorial for TWRP compiling some years ago
暗夜很无语 said:
Let me try another TWRP version
Click to expand...
Click to collapse
If your goal is to flash the ROM without format the internal memory won't work, you may be able to flash the zip but after the flash you'll be forced to format the internal memory without fbe support
mrinfinity0007 said:
i don't root my phone? does it work without it?
Click to expand...
Click to collapse
Yes it's a root shell, you have root permissions only with ADB, not in your phone. If you want to roll back to selinux enforcing and stop the rooted shell simply reboot the phone, that changes doesn't survive after the reboot

@JackSlaterIV found it, it's old and some things may be slightly different but this is a good tutorial.
Here's the link of the minimal manifest 12.1 is the correct branch but decryption is WIP at the moment, don' t think will work, unless you don't set a password/PIN/pattern, in that way should be fine
@mrinfinity0007 never mind, i've fixed It, Gcam was crashing because it was trying to use hexagon for HDR+, but SELinux was blocking it. Now it's wotking fine even in enforcing mode
PS: i've decided to upload the latest personal build i made, some thing may change because i'm still testing them, but more or less (on device side) this will be the next official release when PE devs will merge QPR2 changes and feb security patch.
Here's the direct link
And here's the changelog:
ROM:
- Synced code with latest PE changes
Kernel
- Ported EAS and set it as default scheduler
- Ported Stune Boost and use it as default
- Fixed almost all compiling warns
- Ported misc optimisations from infinity kernel
- Fixed a bug that could cause the boot to fail (Mi logo --> Black screen --> Mi logo again)
- Misc fixes from upstream
Recovery
- Fixed a bug that could cause the boot to fail (Mi logo --> Black screen --> Mi logo again)
Device Tree
- Ported EAS
- Move to EAS compatible power HAL
- QCOM audio HAL: add missing audio power hints support
- Fixed Google Camera crash when trying to use Hexagon
- Camera: move to Gcam Version MGC_8.1.101_A9_GV2b_ENG big thanks to BSG. Camera can be updated with all APKs released by BSG, just be sure to download the ENG version
- SELinux: fixed all denials
- Ported various improvements from my old 12.1 ROM
- Tuned ZRAM size for 3Gb devices
- Camera: improved camera HAL + misc fixes
- Configure SQLite to operate in MEMORY mode
- Set CFQ as default scheduler
- Added pixel animated wallpapers to build
For more detailed changes take a look at my repos
PS: i cannot test GPAY at the moment because i'm testing other things and i'm running in permissive mode, if someone decide to try the update and use GPAY please let me know if works, i made some changes to sepolicy and i want to be 100% sure that Google pay isn't broken before the official release.

Development [CLO][BETA3]Project Zephyrus CAF OnePlus 9 Pro [lemonadep][CLO/CAF]

Nice to see another CAF ROM! Will it be possible to flash this on a lemonade?

Changelogs:
BETA 1 : INITIAL BUILD, BASED ON F.17
BETA II : Update to F.20
Update CAF Tags
merged TAG changes from CLO to kernel
merged some lineage-20.0 changes to kernel
fixed alert slider and Wifi Symlink
Update to latest carrier config from stock.
===================================================================
BETA III :
- Fixed Dt2W
- Merged LA.UM.9.14.r1-21200-LAHAINA.QSSI13.0 CLO / android11-5.4 lts / ASB-2023-03-05_11-5.4 tags in the kernel
- Fixed Refreshrate switch and Implementation
- Fixed heavy active/inactive drains
- Fixed wired charging randomly gets disconnected
- Fixed wired/wireless warp charging randomly gets slow down
- Fixed random media playback issue in social media apps
- Added a fair amount of Customisations
- resolved some denails
- Fixed certain Browser and a SnapChat issue.
- And some other Misc. changes
[CLO][BETA3]Project Zephyrus CAF OnePlus 9 Pro [lemonadep][CLO/CAF]
Project Zephyrus for OnePlus 9 Pro[lemonadep] What is this? Project-Zephyrus - Minimal Android-CLO Fork Focused on Design and Performance! Fast and Smooth: Project-Zephyrus is more smooth (i.e. less jank) and responds faster than stock. Clean...
forum.xda-developers.com
=====================================================================

Nice rom, will try.

Is F.18 firmware base okay to flash over?

The rom booted, however I had problems with the wifi. I couldn't find a network. And whenever I tried to get into the network settings, it ended up crashing. I used fw f.18 from crdroid. If anyone else can confirm this. Maybe I did something wrong.

kodayoda713 said:
Is F.18 firmware base okay to flash over?
Click to expand...
Click to collapse
yes, should be working

alb94 said:
The rom booted, however I had problems with the wifi. I couldn't find a network. And whenever I tried to get into the network settings, it ended up crashing. I used fw f.18 from crdroid. If anyone else can confirm this. Maybe I did something wrong.
Click to expand...
Click to collapse
oooh wait thats kinda possible now, maybe something from my end... here try this
project-zephyrus_oneplus9pro-13.2-20230221-0316_UBG.zip
drive.google.com

Does fingerprint work on this? While screen is off?
And is there any plans to make a version without gapps? Because that's actually what this device would need so badly.. an optimized rom that utilizes the hardware best (caf) without annoying google stuff.

Sherif Rahim said:
oooh wait thats kinda possible now, maybe something from my end... here try this
project-zephyrus_oneplus9pro-13.2-20230221-0316_UBG.zip
drive.google.com
Click to expand...
Click to collapse
Working fine in this build.
The slider for mute or vibrate is not working. Is it expected?

alb94 said:
Working fine in this build.
The slider for mute or vibrate is not working. Is it expected?
Click to expand...
Click to collapse
alert slider is dead?

Sherif Rahim said:
alert slider is dead?
Click to expand...
Click to collapse
Yes

alb94 said:
Yes
Click to expand...
Click to collapse
Can ya provide me logs

Sherif Rahim said:
Can ya provide me logs
Click to expand...
Click to collapse
At the moment I'm back to Crdroid. :/
I only have my work computer to do this, and my shift is ending. I can try tomorrow.

Sherif Rahim said:
oooh wait thats kinda possible now, maybe something from my end... here try this
project-zephyrus_oneplus9pro-13.2-20230221-0316_UBG.zip
drive.google.com
Click to expand...
Click to collapse
This build not booting for me. Attempting to flash the first build
EDIT: Initial build has wifi issue as mentioned, and dirty flashing new build not accepted in recovery
EDIT 2: Reflashed everything and seems to be working. Thanks for you work!

kodayoda713 said:
This build not booting for me. Attempting to flash the first build
EDIT: Initial build has wifi issue as mentioned, and dirty flashing new build not accepted in recovery
EDIT 2: Reflashed everything and seems to be working. Thanks for you work!
Click to expand...
Click to collapse
which build did you flash and everything works?

Sorry, flashed the second build you provided. Few minor bugs, but haven't tested everything. Sending you logs for alert slider

BETA 2
User build
project-zephyrus_oneplus9pro-13.2-20230222-0347.zip
drive.google.com
- Fixed Alert Slider
- Wi-Fi Issues resolved

Sherif Rahim said:
BETA 2
User build
project-zephyrus_oneplus9pro-13.2-20230222-0347.zip
drive.google.com
- Fixed Alert Slider
- Wi-Fi Issues resolved
Click to expand...
Click to collapse
what is the recommended firmware version?

1thomas said:
what is the recommended firmware version?
Click to expand...
Click to collapse
oos 13 f.20
although any of 13 fw should work

Develop Bugs

welcome