Question Any thoughts on MIUI 14 on global? - Xiaomi Mi Pad 5

Personally I hate it. I noticed two bugs that absolutely shattered my experience as of today. One is that you cant pull the status bar with your mouse if it is all the way to the top of the screen, it has to be one pixel below or something otherwise nothing happens. The other is that the mouse cursor gets extremely laggy in multiple situations (I dont know what causes it), frequently when changing apps, any sort of loading and other situarions.
I reported these issues but if they dont get fixed I'll install an older firmware.

Here's an example:

Disappointing. Expected more from the update

really Meh. Ive noticed some bugs tho like when i have youtube in PIP mode the recents screen can be viewed but no apps can be switched from there until i exit YT. im also a bit annoyed i can no longer press hold on the recents-screen on app icons to quickly uninstall, or what I usually do to get to the app settings. but it goes there by pressing the app icon on the recent-screen, no big deal. other than that, cant really tell much of a difference at all tbh. its not bad , not great. Just "meh".

For me, its beyond BAD!!!! Before already had many issues like crash app (pc mode crash like once every hour) . Drawing apps can display proper color palletes once Dark Mode turn on. This had been since forever.
The worst I had, and really makes me want to make public petition so these manufacturers be more responsible towards theirs cust, is the Smart Pen. While its cost USD 100 , and they make closed SW so u can't used any ( i mean NONE) 3rd party stylus, but after the updates the pen cant connect to BT at all and keep prompt Charge your sylus now!!!! Wtf!!! And none over the Net any solutions available and as usual their forum real HOPELESS!!!!

My stylus pen doesn't even show up on bluetooth. It's like it doesn't exist. I've tried two pens and both don't recognize.

Related

[BUG] Screen Sensitivity Issue-Lag (4.0.4-4.1.x)

Problem summary
Known cause (might be others): selecting an app from the Recents list (Task Switcher)
Temporary fix: turn the screen off, then back on
Workaround: avoid using Recents list (you can use a 3rd party task switcher instead)
How to test: open Messaging, hit Home, hit Recents, select Messaging from the list. Your screen will be less sensitive until you turn the screen off and back on. You can view the pressure by going to Settings -> Developer Options -> turn on Pointer Location. This will allow you to see the Prs of each tap in your status bar. Normally your lightest taps that register will show anywhere from 0.28 to 0.32. However, after this bug is activated, you will mostly get values over 0.40 for your light taps. This is actually a very noticeable increase, especially when trying to type quickly.
Please report any other known methods to "activate" this bug. After re-assigning my Recents button to a 3rd party app (I'm using Simple Task Switcher), I haven't seen this bug at all. It seems that a couple of people have seen it produced by something other than Recents, but they haven't narrowed it down (or reliably reproduced it on purpose).
Please star this issue officially so Google can fix:
Link is http://code.google.com/p/android/issues/detail?id=29734
Note: Downloading & using Screen filter application from play store, with brightness set to
Your hands are really dirty or really dry. Try moisturizer or something.
Been using my screen for almost hour straight now. No issues.
--------+++--------
iphone. helping computer illiteracy become popular since 2007.
Hehe yes this s gonna be a difficult one to confirm. But it is definitely not dirty hands. To clarify, a quick press of the power button to lock then unlock completely fixes the issue. Same fingers suddenly register perfectly. This is driving me nuts as the phone is not even usable right now. Literally.
@rbiter said:
Been using my screen for almost hour straight now. No issues.
--------+++--------
iphone. helping computer illiteracy become popular since 2007.
Click to expand...
Click to collapse
ios 6.2 doesnt get issues.
I don't know about your other experiences, but as far as the browser goes I have the same scrolling effects as you do. I think this is how it is meant to be. They tightened the scrolling a lot and I kinda like it. Before one small flick would send me across the whole page, which was kinda annoying. Just my preference.
I'm not having this problem. It would drive me crazy too. Been using my phone alot over the past two days and I didn't run into this problem even after almost 1h of continuous surfing. Also a few checkpoints of Shadowgun didn't trigger it.
But you can confirm your problem if you enable "cursor position" in the dev options (hope that's what it 's called in english). "Prs" and "Size" should need a lot more than around 0.30-0.40 to register your touch if you have the problem you describe.
I am sorry that you're experiencing this, but 4.0.4 has nothing to do with this. 4.0.4 is just software, Galaxy Nexus is not a pressure-sensitive device, it is merely touch-sensitive. Which means that software gets an analogue signal from the touchscreen, either 1 or 0. It has no 'range' of sensitivity, so it cannot decrease in sensitivity in software (if it did, then it would not work at all).
This is entirely hardware issue and I suggest either making sure your screen is clean, your screen protection thing (if you use one) isn't acting up or if your hardware has become faulty (have you dropped it recently?).
If problem persists then return under warranty.
My wife had this issue once.
It was the third party launcher she was using.
I don't think its a matter of touch sensitivity dropping, its a matter of the system just being too slow to really work right.
It was ADW EX, fwiw.
kristovaher said:
I am sorry that you're experiencing this, but 4.0.4 has nothing to do with this. 4.0.4 is just software, Galaxy Nexus is not a pressure-sensitive device, it is merely touch-sensitive. Which means that software gets an analogue signal from the touchscreen, either 1 or 0. It has no 'range' of sensitivity, so it cannot decrease in sensitivity in software (if it did, then it would not work at all).
This is entirely hardware issue and I suggest either making sure your screen is clean, your screen protection thing (if you use one) isn't acting up or if your hardware has become faulty (have you dropped it recently?).
If problem persists then return under warranty.
Click to expand...
Click to collapse
Lol that is hilarious. You forgot the step where its the OS that actually processes the input data, so in that process, a ton of problems can arise.
And personally, since 4.0.4 I have also been experiencing a "similar" issue. When scrolling down (and only down), I experience a kind of "lag" like if it only registers the swipe movement half an inch lower. Its not a big deal, but still an issue.
Edit : What he explains as "pressing very hard" is most likely the fact that when you press harder you actually cover more surface, so the amount of extra input data can definitely impact the behavior.
I had issues for a few hours after the 4.0.4 update, where my softkey buttons weren't responding. Thankfully, it seems to be fine now, but it was a cause for concern.
Sent from my Galaxy Nexus
gokpog said:
I'm not having this problem. It would drive me crazy too. Been using my phone alot over the past two days and I didn't run into this problem even after almost 1h of continuous surfing. Also a few checkpoints of Shadowgun didn't trigger it.
But you can confirm your problem if you enable "cursor position" in the dev options (hope that's what it 's called in english). "Prs" and "Size" should need a lot more than around 0.30-0.40 to register your touch if you have the problem you describe.
Click to expand...
Click to collapse
Thank you my friend, I should have thought of this; now I have numbers to confirm this. So with cursor option enabled I can get down to 0.30, managed 0.28 once. However when the bug starts, I can confirm that I cannot get below 0.60. It just refuses to register that input for some reason.
I lock the screen, 1 second is all it takes, and now it registers down to 0.30 again and all touch works properly. Its almost like some type of memory leak issue is the way it feels to me. It only starts happening after a few min of use.
Its definitely an issue now that I can see the pressure numbers. The question is what the hell can I do about it. I flashed aokp29 with the latest 4.0.4 ota merged in, problem still occurs. I'm gonna try stock 4.0.2 or 4.0.1 just to see. Thanks.
I have never had much luck upgrading Linux versions. That's why I start fresh every time with Android. Lol
Sent from my Galaxy Nexus using Tapatalk
Before I start digging, anyone know specifically which driver controls the touch input? I'll try looking thru github.
Also I was on stock 4.0.1 prior to this. So this could be normal behavior for everyone but everybody is used to it since nobody stayed on 4.0.1 like me. Cause I can easily say this is difficult to notice if you aren't paying attention. The question is, why does locking the screen temporarily change it back...
I can confirm some of what you are saying..sometimes when I'm browsing the scrolling tightens up..I lock the phone then unlock it and it is smooth again..doesn't happen all the time tho..doesn't bother me but I've noticed it
Sent from my Galaxy Nexus using XDA
I can also confirm. This morning I found the Swiftkey was lagging on Facebook. Something like the phone did not receive the touch. Then I rebooted and now it is ok.
I did not get this issue on 4.0.2 and I don't install anything new on 4.0.4.
The way I installed 4.0.4 was from the official factory image, so my phone is fresh! I reinstalled all apps manually as well. Nothing fancy apps.
I know this is my first post, but I can definitely confirm this issue.
I use my Galaxy Nexus for development, so the screen is always on. The sensitivity goes down very quickly.
My phone was an International GNEX that I loaded the US firmware on and then I flashed the OTA 4.0.4 update.
kristovaher said:
I am sorry that you're experiencing this, but 4.0.4 has nothing to do with this. 4.0.4 is just software, Galaxy Nexus is not a pressure-sensitive device, it is merely touch-sensitive. Which means that software gets an analogue signal from the touchscreen, either 1 or 0. It has no 'range' of sensitivity, so it cannot decrease in sensitivity in software (if it did, then it would not work at all).
This is entirely hardware issue and I suggest either making sure your screen is clean, your screen protection thing (if you use one) isn't acting up or if your hardware has become faulty (have you dropped it recently?).
If problem persists then return under warranty.
Click to expand...
Click to collapse
Just to point out, the phone is all digital. It does not get an analog signal from touching the screen. Also to that point you said analog but then described digital with the 1 and 0
Has anyone affected tried going between 4.0.2 and 4.0.4? To check the possibility of a driver or some related value changing.
Also, if not fixed by going back to 4.0.2, this could be due to current leakage from somewhere causing the touch to not work properly. I've seen it on other capacitive touch devices, though mainly when a non-compatible charger is connected. When you shut the screen off, the charge causing the problem/interference with the touch is temporarily dissapated, but then comes back after you use it again. Probably very unlikely in this case, unless Google changed something in the touch driver that makes it more sensitive to interference, which in turn messes with actual input from fingers.
TechNoir said:
Has anyone affected tried going between 4.0.2 and 4.0.4? To check the possibility of a driver or some related value changing.
Also, if not fixed by going back to 4.0.2, this could be due to current leakage from somewhere causing the touch to not work properly. I've seen it on other capacitive touch devices, though mainly when a non-compatible charger is connected. When you shut the screen off, the charge causing the problem/interference with the touch is temporarily dissapated, but then comes back after you use it again. Probably very unlikely in this case, unless Google changed something in the touch driver that makes it more sensitive to interference, which in turn messes with actual input from fingers.
Click to expand...
Click to collapse
Its possible. I was on 4.0.1 so perhaps this issue originated in 4.0.2 but I never noticed since I didn't update then. I can add that I did multiple wipes and clean flashes, and also tried both aokp 28 and 29 (new 4.0.4 ota merged), and happened on both.
I'll post what I just sent to arbiter which gives more insight.
From my extra testing under normal use my light touches register 0.28-0.33. Especially on swipes, the end of the swipe registers 0.28 as the finger travel breaks contact with the screen giving that swipe extra input which pushes the swipe motion further extra boost. When the bug starts the touch swipe won't even break 0.38-0.40, and that extra swipe data is lost resulting in the end of the swipe data points being excluded and swipes travel half the distance.
This gets exacerbated on the keyboard when fast typing light pressed. Its so bad it frustrates my face off cause typing just ceases to be possible. Such a difficult issue to diagnose.
Click to expand...
Click to collapse
Yes my face literally flew off!

Is anyone else having these many problems?

Hello everyone! I just want to start off saying I love reading this site not only because it's so informative,but yall really help each other out. After stalking these forums extensively, I've come to the conclusion (well hopefully) that I'm the only one experiencing these issues with my tablet. First off, I love this tablet. I just feel like samsung half baked everything about it. The software Is buggy and so is the hardware (I work at an electronics store, and let me tell you, the samsung rep knows all of my problems.) It's rather unfortunate cause this is a very expensive tablet and I was expecting it to run like it's something premium. Lol, I thought.
first off is the display. I know it's gorgeous, but has anyone noticed when you're In an application like Google drive, s note, or even Facebook that the screen dims and brightens automatically? It also happens when I use swype on drive and applications like fb.
Second, the pen input/snote. In snote, has anyone had the issue where, for example, you would write a large area of text (or even smaller area), you cut it then paste it somewhere later in the note. Then, once you start writing again, anything similar to what you just cut out (for example i'll use the the word world). I'll write wor, but when I write the rest, ld, it erases that and shows me the paste symbol there. This is extremely frustrating as I'll be in class on my 3rd or 4th page of notes and this will happen (almost wants me to use my geek squad protection, almost). Yes, even after I clear the clipboard it still happens. I also have a screen shot attached to the other very common error I get in snote, or even in Sketchbook for galaxy. Action memo constantly crashes, I could just open a memo, stare at it for a few seconds and it will "unfortunately stop". ( Or, I mean, it could just be my face, but I would feel better if it was samsungs fault )
third, they keyboard. You would think the tablet with an 8 core (or at least soon to be) processor can handle it. Nopee. Swype just lags after a day or so of use. Not fun. Then, when I use the spen throughout the day, when I change the keyboard method to handwriting recognition it just dissappears. Doesn't even want to let me put one thing in. I've tried turning off the spen detection for the keyboard keyboard and I still get the same issue. When things like like this start popping up, it's time for a reboot. Which I have to do about once or twice twice a week.
Has anyone experienced these things before? Or did I just get my hopes up too high and samsung has failed me?
Thanks
oh and everything is up to date, nothing is custom besides the font, which has no Impact on these problems.
the kb was too laggy for me. i've switched to thumb kb and use tha kb switch app to auto select the samsung kb when I whoop out the spen.
I really think samsung rushed this thing out to beat the ipad release and planned on patches for anything they find.

Azpen Hybrx A1160 Remix OS 2.0 laptop discussions

Just wanted to start a thread to discuss this device. For those not familiar with it, it's a very inexpensive 11.6" laptop that runs RemixOS 2.0 from the factory. It does NOT have a touchscreen and the display is a low resolution (1366x768) TN panel display. The CPU is an Allwinner A64 Cortex A53 quad-core 64-bit processor.
The device I purchased (via their Kickstarter campaign) has 2gb RAM and 32gb storage - and it costs me $89.
Some interesting things I've found so far...
1. To disable the damn "click" sound every time you select something (via the touchpad or a mouse), download the QuickShortcutMaker application from the play store. Then expand the Settings items under the Activities section and find the "Other Sounds" activity. Once you click on the Other Sounds activity, click on "Try" on the right-hand side - this will open the "Other Sounds" dialog where you disable "Touch Sounds"! You can also disable some other sounds here. No idea why Remix doesn't allow access to these sound options. Explore the other Settings activities - there are some other cool things you can do. I also used this app to create "Shortcuts" to specific forums in Tapatalk (something that you do via widgets in standard Android). This QuickShortcutMaker app is pretty damn useful on this device!
2. I've found that I was able to connect my Apple USB->Ethernet adapter to this device and it works! However, it doesn't seem to work with ALL apps. For example, Tapatalk doesn't work with it for some reason - but so far, every other app has worked. You can also access ethernet settings via the QuickShortcutMaker app mentioned above.
3. Enable "Experimental Features" by clicking on the "Kernel Version" section of Settings->About. Once you do this, enable the "Use mouse wheel to simulate swipe gesture". This allows you to zoom in and out of things like web pages, images, etc. To do this, hold down CTRL+ALT while moving the mouse wheel. Apparently, the touchpad on this device does NOT provide pinch-to-zoom functionality, so without this setting, there is no way to zoom in and out in most apps! Kind of a big issue! Unless there is another way that I just don't know about. I know you can CTRL- and CTRL+ to zoom in and out in web pages, but that really just increases the size of the text - not really a true zoom in/out.
4. Gmail app. If you open the Gmail app as a window, you don't get the "split-screen" that you get if you open the app in full screen. But if you open in as a full-screen window and then "restore" it to a smaller window, the split-sceen function still works. I usually just leave Gmail minimized in order to keep the split-screen function active for Gmail.
5. Sometimes, the screen comes back on if you put the device into standby with the power button and then close the lid. I haven't been able to find the exact circumstances where the screen comes back on when closed, but it seems that when it does come on when it's closed, it stays on! Need to figure out why this occurs..
6. Bottom of device gets REALLY hot after any extended use. May be a long-term issue...
7. By default, wifi is set to turn off when in standby (unlike tablets) - unless the device is plugged in - then wifi will stay on. This can all be changed under Settings->Wifi->Advanced. I actually set mine to always turn wifi off when in standby since it seems that the device doesn't actually work while in standby anyway (again, unlike tablets). May help avoid wifi failure over the long-term.
8. I have run into websites (such as microcenter.com) where when you open a drop-down list, there is no way to "scroll" the list if it goes off the screen. To see what I mean, go to microcenter.com and try to set the store location - it opens a drop-down list that goes off the screen and there is no way to scroll down in the list! The "work-around" is to use the down arrow key, but it doesn't work very well (web page wants to update every time you press the down arrow)....
That's about it off the top of my head... It's a shame that this device cannot upgrade to RemixOS 3.0, like was stated in the kickstarted campaign (and later "retracted").
Anyone know how to root this thing?
It's an interesting device for the cost, but what I *really* want is a similar, large'ish device with a higher-quality, higher-resolution touchscreen that is removable from the keyboard - with at least 2gb of RAM (10" and 1gb of RAM isn't enough for RemixOS!) and runs RemixOS 3.0 - so far, I can't seem to find such a device...
Sent from my A1160 using Tapatalk
I got the same model 2GB w/32GB storage. Do you or anyone know how to get it to charge and or power on. Mine only worked for 2 days, now nothing. I contacted Azpen over a week ago about it and still haven't heard from them. Please help.
Cerealius said:
I got the same model 2GB w/32GB storage. Do you or anyone know how to get it to charge and or power on. Mine only worked for 2 days, now nothing. I contacted Azpen over a week ago about it and still haven't heard from them. Please help.
Click to expand...
Click to collapse
I just plugged mine in and it charged fine (blue LED next to charging port turns on when charging and turns off when fully charged).
To turn mine on, I just held down the power button on the keyboard for a while... You can also fully power it off that way as well (if it gets hung or something, which I have managed to do a few times now).
I've *really* put this thing through it's paces over the last few days. Overall, it's a decent device for the price. Personally, I'd rather spend a little more for one with a better, higher-res, removable touchscreen though.
I also have a HP Slatebook 10 x2 - and it's a great device, but stuck on Android 4. Otherwise, it has a MUCH nicer, removable touchscreen and even an extra battery in the keyboard (that charges the tablet when attached). Just wish it was a little bigger (13" or so) and was running Remix OS.
But, for $89, I can't complain, my A1160 actually runs pretty well for what it is...Luckily, I haven't had any issues with mine.
Sent from my HP SlateBook 10 x2 PC using Tapatalk
Hello...
@jtrosky, thanks for starting this thread, i've already gotten something out of it... getting rid of that damn clicking every keypress.
It was also nice to find that quickshortcutmaker, thats really a cool app that seems to allow more access than I could find...
Everyone else, hello!
I am an PC user since 84' and an Apple iPad user since, well the day the ipad 2 came out and now I'm on the iPad now. The only reason I say any of this is because the reason I got this Azpen A1160 was to help learn a bit about android and linux. I would also like to figure out how to get to the root...
Knock on wood but I got this three days ago and have literally beaten the software out of it loading, looking, deleting, and I thought I had screwed it up several times but it just keeps on ticking. The back does get a little warm, I haven't actually measured it yet but I'm going to, but I dont think it's too bad. I've run six full charges on battery and worked on it plugged in. (which it doesn't seem to like)
I'm happy with it right now and I think its going be a fun ride. I bet this is going to be a fun place to be in the next couple of months...
Buddy
Oh - one more thing I found out - and this may be well known already for those more familiar with RemixOS. If you click and hold on the little icons on the bottom-right of the taskbar, you can move them around. So, for example, you can make it so the brightness, volume, bluetooth and wifi icons are always visible, even when that section is "collapsed"...
Also - I *love* having the key to disable the touchpad (the key next to the arrow keys). Since I usually use a bluetooth mouse, it's so nice being able to disable the trackpad so quickly and easily!
Oh - and the Prtscr button on the keyboard brings up the very cool screen capture tool, which let's you select what area of the screen to capture. Very handy tool!
Still not sure what the "Pausc" button does - I'm assuming it's actually a misprint and it's supposed to say "Pause". Gotta love cheap electronics that are made in China!
So far, this device is definitely working well for me. Although, I'm not so sure the screen is big enough to truly take advantage of the RemixOS windowing capabilities... But, it's still better than not having any windowing capabilities.
Sent from my A1160 using Tapatalk
One more quick tip - there are apps out there that will let you boost the volume of the device. Right now, I'm using Music Volume EQ to boost the volume, but there are probably better apps out there for this purpose... Will explore more later and post an update if I find a better app.
Sent from my A1160 using Tapatalk
Hello guys, thank you for creating this thread.
Did anyone have any issue by setting up a password for the lock screen?
I did, and it worked for a couple of times, then it started not to recognize the password (password was correct, no caps lock...). Of course it didn't work after reboot as well.
The only option was to remotely reset the device using the google's tool from another pc. Very annoying. Since then never tried to set another security system for the screen lock.
I'm also getting an a problem after turning off the screen: when I try to turn it on again, most of the time I get a blank screen. I have to try several times to get back to remix os.
Did anyone faced this issue as well?
Regards
sephitoor said:
Hello guys, thank you for creating this thread.
Did anyone have any issue by setting up a password for the lock screen?
I did, and it worked for a couple of times, then it started not to recognize the password (password was correct, no caps lock...). Of course it didn't work after reboot as well.
The only option was to remotely reset the device using the google's tool from another pc. Very annoying. Since then never tried to set another security system for the screen lock.
I'm also getting an a problem after turning off the screen: when I try to turn it on again, most of the time I get a blank screen. I have to try several times to get back to remix os.
Did anyone faced this issue as well?
Regards
Click to expand...
Click to collapse
I have not tried setting up the lock screen (I just leave mine unlocked). And no, I have not had any issues with a blank screen when turning the device back up. What's strange is that the device does not automatically turn on when opening the screen - at least not on my device - I have to press the power button.
Your issues are probably because of the poor quality control with these device. Somehow, I lucked out and got a "good one", but many people seem to be having build-quality issues with them...
Sent from my A1160 using Tapatalk
Great posts and many thanks to the OP.
I got a US 2 pin power plug instead of a UK plug. Does anyone know of a similar products power lead that will fit our A1160?
Need help...
Hi,
First, thanks for creating this thread and posting your tips. Obviously there are not a lot of people using this device yet so it is great to find useful info on it.
Since there is no known root solution yet, I tried installing NetGuard as an adbllocking solution that does not require root. I have used it before without any issues. Unfortunately, on the Azpen, every time that I enable it, it blocks all internet access (it is obviously not supposed to do that). I even tried alternative apps like AdClear and got the exact same result. There is something strange going on with the Azpen. I would really appreciate it if anyone had any pointers as to how I could resolve this.
Thanks...
Welp! I had much higher hopes for this device and I haven't even received mine yet! Will this be rootable?
Thanks for creating this, used both your sound clicking tip and the pinch to zoom in. A bit annoying having your fingers in multiple place to zoom in, but what can you do? I'm a college student and have found that I can't access the net with this device due to it's mac address changing each time. I'm not sure if anyone else has noticed this or if mine is the only one. Just thought I would share that.
HyugaSho said:
Thanks for creating this, used both your sound clicking tip and the pinch to zoom in. A bit annoying having your fingers in multiple place to zoom in, but what can you do? I'm a college student and have found that I can't access the net with this device due to it's mac address changing each time. I'm not sure if anyone else has noticed this or if mine is the only one. Just thought I would share that.
Click to expand...
Click to collapse
That is *really* interesting! Sure enough, if I disable and re-enable the wifi, the MAC address does change!! That makes absolutely no sense - I've never seen such a thing!
I'll look into that a little more - but without root, I doubt there is anything that can be done about it. So strange!
One possible option - set wifi to stay enabled all of the time - maybe that way the MAC will stay the same. You can set that in the wifi settings advanced options. I've found that you have to reboot after setting it to always stay active....
Sent from my A1160 using Tapatalk
So far I have been impressed for the cost of this unit. I have a few concerns and wanted to see if anyone had input:
1. Since the length of the power chord is so short. Is it possible to use a USB to Barrel jack type of adapter to power this? That way you can attach to a portable power bank?
2. battery power, I find it to not last that long and I find it takes forever to charge. I thought that this would last 5-7 hours unplugged, nope. It was supposed to charge within in a hour, nope. Any ideas on this?
I use an external mouse and click on the trackpad disable button. I find it much easier to use the computer when typing.
I'm looking at Pinebook, a notebook having the same AllWinner processor (CortexA53).
It seems this notebook can run all OSs suppoted by Pine64, such as Android, some linux distro, Windows IOT and they are working on a Chroimum porting (try to have a look at the pin64 forum).
Do you think it would be possible to do the same with A1160 ?
Another solution could be PhoenixOs (as pointed out in some comment on Kickstarter).
There are already some devices with CortexA53 processor running PhoenixOS out of the box.
I honestly don't know what OS's can be ported over to this device yet. I have a feeling that it's never going to have a huge user base though, so I wouldn't expect much from the developers out there.
Now that Chromebooks can run Android apps, this device just isn't quite as interesting as it once was. Basically, you can now get an inexpensive, *high quality* Chromebook and still have most of the advantages of this device, plus the high quality and frequent updates part.
To be completely honest, I have very low expectations for this device in the long-term. With how hot it gets after any real usage, I expect the mainboard to fail in short order. We'll see. Although, so far, I've really been using it pretty heavily and it does seem to be holding up, but it's only been about a week....
Sent from my A1160 using Tapatalk
Something else I recently noticed - and this may already be a well-known thing with RemixOS... If you close an app by clicking the back arrow on the top-left of the window, you continue to get notifications for that app. But if you close it by clicking the "X" in the top-right of the window, it seems to completely the kill the process and you no longer receive notifications (or if it's an app that stays around and puts a "permanent" notification in the notification tray, the "x" seems to completely stop the app as well and removes its notification item).
At least that's what seems to happen...
Also noticed that even if you setup wifi to stay active even with power off, the unit eventually goes into a "deep sleep" where you will no longer get new email notifications, etc. It even seems to turn wifi off after a while (even though it's set to stay on all of the time).
Lastly, if you have an external mouse connected, close the laptop lid and then move the mouse, it turns the screen back on - even while closed!
Sent from my A1160 using Tapatalk
Hi All,
Saw this in the comments and thought I would chip in with my experience so far.
I got the 64GB version and so far it is the computer I have paid for.
The track pad as everyone said is very crappy, but I just use an external mouse instead so its not a big problem.
I seem to have a good unit and don't have any problems with the unit.
My only gripe is that the battery kinda sucks and after using it intensive for like 3-4 hrs, it will have almost no battery. I wish it came with my UK adapter instead of the US one, but its okay.
Furthermore, is there anyway to put widgets on it? or Use another launcher?
Has anyone tried to root it or tried to install another OS on top of it? I heard that PhoenixOs is possible?
MindlessManiacs said:
Hi All,
The track pad as everyone said is very crappy, but I just use an external mouse instead so its not a big problem.
Furthermore, is there anyway to put widgets on it? or Use another launcher?
Has anyone tried to root it or tried to install another OS on top of it? I heard that PhoenixOs is possible?
Click to expand...
Click to collapse
For what it's worth, my trackpad actually works really well. I was surprised to read all of the complaints about it. I'm guessing that a lot of them are defective?
Regarding the widgets, no - there is no way to use Widgets in Remix OS 2.0 (not sure about 3.0), which is a huge limitation. Widgets are one of the things that make Android so powerful - and I miss them big time in Remix OS...
I too would like to know if there is a way to load PhoenixOS on this device. I thought I saw it mentioned somewhere that it would be possible (maybe one of the updates on Kickstarter?). I will see if I can email Azpen about this. RemixOS 2.0 is really good, but not quite "finished" in my opinion...
Sent from my A1160 using Tapatalk
Hi! Does somebody receive a blank white screen when laptop booting or waking up?
Every time when I push power button I get a blank white screen... How I can fix it?

UI fault or touch glitch (multiple bugs and no app to report)

Lot of times i have faced the issue of touch not happen at some points and also sometimes the buttons even dont show up.
1. when i open amazon.in in my chrome...after turning the night mode on...whenever i scrollup the window...the screen of phone flickers...i tried to take screenshot bt they were clear...
At some time...i felt that the screen will fuseoff...it was so bad experience...and no bug report found at all for future improvements.
2. Major flaw...when i played games...all worked fantastic bt somehow the phone does not understand the coding of the game(hitman absolution)
Whenever i try to switch the weapon in armoury, the arrow to switch between weapons appears for about half second and vanishes...at the end i am unable to switch the weapons...stuck at default weapon...
A huge dissatisfaction that u have every specs to play around and i dont know wt is stopping me from enjoying the things.
Lot of websites dont load properly like on other mobiles...
3. I am huge fan of hayday game...but when i start playing...after 5-10 minutes....the game shuts of accidently and homescreen appears...and the thing happens everytime ...even after multiple reboots and full battery.
Not even the app not responding box shows...just everything shuts...very bad experience....and dont know the solutions of such things...
The slow motion feature in the camera records at 120fps...quite fast for slomo and 960 fps which makes video look laggy...ther must be some solution to record 540fps also.
And the customization..crap..there is no theme engine...if u wanna change something...in dreams or in other rom.
There is not even the default gallary application by lenovo...no android M logo shows up on multiple tap in settings about model/base, just sick of the things....better switch the rom.

Top half inch screen not working

I have a HTC One m8 and the top half inch of the screen does not respond but occasionally it does sometimes for a little while. The top half inch generally tends to work when the battery is charged to 100% but sometimes that doesn't happen either. if it helps I use a tempered glass as a screen protector and the screen does not have any physical damage and it doesn't help when u boot into safe mode. I have also tried a hard reset.
Coincidentally i am working on a phone with the same problem (not mine). After a lot google research the owner decided to use another Launcher (Smart Launcher). This did not fix it entirely, if you are in Apps you can use the statusbar, but its not working on homescreen. I dont know why it behaves like that, but surprisingly many people get problems like that. I tend to believe that there is some software problem involved, because changing Launcher or using custom rom has been reported helpfull/fixing the problem (not allways tho..).
Now he had some other troubles with this phone and in the process i did a reset, that did not fix things as you said. I will install a custom rom next and will report back next week.
So i was wrong with saying a new lauchner solved the problem. Statusbar(sb) was accessible in home screen but not in app, said it wrong in the other comment. Now i had some time to test this and i can say that at least the phone i was working on is broken.
The top part does not recognize any touch input. The reason the sb showed some reactions is, that the launcher had a bigger trigger area (i guess), so you could pull it down. But still the top part was not responding. I tested it with stock, S-Rom and one Nougat Rom (dont remember), none of that showed an input in the top part.
Solution for now is different launcher or app that pulls down the bar. There are still some problems in daily usage, that this will not fix, so i guess its time for a new phone.
I am facing same problem. Is it any update which was pushed by HTC which makes the top 1 inch unresponsive ocassionally.. Indirectly, a marketing gimmick to push us by a new phone. So if it is really like that, who would buy a HTC phone again anticipating same problem again. Might go for Samsung (my own preference). huh !!!

Categories

Resources