I'm totally used to the yellow warning, but this red one is new. I think I must've screwed something up. I'm rooted and booting up fine, except I have to hit the power button on the second (red) warning. Is this normal, or did I do something wrong?
jfsat said:
I'm totally used to the yellow warning, but this red one is new. I think I must've screwed something up. I'm rooted and booting up fine, except I have to hit the power button on the second (red) warning. Is this normal, or did I do something wrong?
Click to expand...
Click to collapse
I think it's okay
jfsat said:
I'm totally used to the yellow warning, but this red one is new. I think I must've screwed something up. I'm rooted and booting up fine, except I have to hit the power button on the second (red) warning. Is this normal, or did I do something wrong?
Click to expand...
Click to collapse
Had this also on my old LG V20 back in the days it's normal I guess
jfsat said:
I'm totally used to the yellow warning, but this red one is new. I think I must've screwed something up. I'm rooted and booting up fine, except I have to hit the power button on the second (red) warning. Is this normal, or did I do something wrong?
Click to expand...
Click to collapse
Just need to flash system.img and vendor.img will fix it
If not reflash the entire bundle
ugene1980 said:
Just need to flash system.img and vendor.img will fix it
If not reflash the entire bundle
Click to expand...
Click to collapse
When I first got the red warning, all I had done was flashing a patched init_boot. That started the red warning, and I couldn't boot up. (I was stuck on the RedMagic splash screen.)
So I went to fastboot, then fastbootd, and flashed system and vendor. That didn't seem to change anything, so I flashed the entire update.zip. Surprisingly, that didn't change anything either.
I went into recovery, and side-loaded the entire update.zip, and then wiped data and did the option right under that (cleanup after update?), and THAT did the trick. I was booting again, but I still have the "corrupt" warning.
So…. It did not help.
Arealhooman said:
So…. It did not help.
Click to expand...
Click to collapse
Yep. I'm totally willing to reset the whole phone again. Especially since I setup my work account, and it encrypted the phone, and now I don't have a fingerprint reader.
I just don't know if I CAN go back to the beginning. I'm worried that I've done something that won't be fixed unless we have something like an MSM tool. Which I don't know of.
Wait, you currently cannot boot to system?
Arealhooman said:
Wait, you currently cannot boot to system?
Click to expand...
Click to collapse
No, I'm up and running. But every time I boot up, I have to hit the power button on the red warning, or it won't continue to boot. If I were to tell the phone to reboot, and then walk away, it will get stuck on the corrupt warning.
This issue usually happens due to dm-verity corruption, so some security features won't work. You can try reflashing /boot and /vbmeta if you want to fix it; otherwise you may need to wipe data due to other Android security features designed to protect user data if corruption is encountered.
If however it's not a big deal for you, you can just ignore the warning and fix it next time you update.
Are you 101 percent stock?
Arealhooman said:
Are you 101 percent stock?
Click to expand...
Click to collapse
Here comes my moment of shame: I think so, but I'm not 100% sure.
First I let the phone do the OTA update, then I downloaded the 3.18 update and payload-dumped it, moved the init_boot to the phone, had Magisk patch it, moved that back to the PC, and after I flashed that I started getting the red corruption warning. So... I DON'T know if that was an exact match to what the phone already had on it. I'd like to assume so, but I'm not 101% sure.
Seems like you are not stock. I was under the assumption you were stock. The obvious solution is to flash stock. I doubt ota updates will apply.
If it is patched by magisk, it is not stock.
Arealhooman said:
If it is patched by magisk, it is not stock.
Click to expand...
Click to collapse
I mean, is there another method for gaining root at this time? Sorry if I misled you.
It's probably fine, but I'm going to try flashing boot.img and vbmeta.img just to see if it'll help. Like I said in the OP, I'm used to the yellow warning, but that red one is extra annoying.
Not sure, I got a Samsung, I think any firmware modification will get you a corruption warning. You can try TWRP, but it is prob same thing.
I have the same problem. tried to make root
Well, I've tried all I can think of. I've flashed different img files, I've flashed the entire update.zip through fastbootd _and_ recovery. The yellow and red alerts haven't gone away. But I'm already used to just triple clicking the power button when I see the yellow alert, and that speeds through the boot process. So I'm satisfied. It's dumb, but it's not the end of the world.
jfsat said:
Well, I've tried all I can think of. I've flashed different img files, I've flashed the entire update.zip through fastbootd _and_ recovery. The yellow and red alerts haven't gone away. But I'm already used to just triple clicking the power button when I see the yellow alert, and that speeds through the boot process. So I'm satisfied. It's dumb, but it's not the end of the world.
Click to expand...
Click to collapse
I also have the "Your device is corrupt" warning after using fastboot enhance to flash the payload bin of the CN rom. My device does not boot it just stays at the Red Magic logo. I can flash either the global rom or the CN rom through sideload recovery. After several tries with both roms, my phone can not still be booted. Any suggestions? Thanks for your reply.
Do the sideload in recovery, and then go to the "wipe" menu (still in recovery), and do both the first and second options. That finally got me booting again.
Related
Hello,
just some hours ago my Galaxy Nexus (SC-04D) rebooted while lying on the table next to me. After several sings of vibration I noticed that the phone doesn't boot completely.
When switching on the phone I get the turn-on-vibration, then the google letters are displayed. Most times the word "google" flickers from left to right over the screen (only the line where the word is supposed to be). Sometimes it boots further and I get the colored "X" displayed. This symbol starts flickering, too and if it went so far it reboots.
Here are two pictures I took from the phone failing to boot:
picpaste.com/img_0001_01-Rmm7kDYb.jpg
picpaste.com/img_0001-eoLqVoiM.jpg
The phone is running stock Android from Docomo. The phone is about 14 months old and has never been unlocked, rooted, modded, taken a bath, ... 'til now.
I tried starting with and without SIM-card, with and without charger attached and let it lie around for several minutes without battery between my tries.
Is there any chance to get my data from the phone or even get it fixed? Please give me a hint what I can do.
Well the Red exclamation mark means that there is a problem with the phone reading the build path. Since you have never rooted the phone, this would mean that the files got corrupt on the phone. With a non-rooted phone a Factory Reset is about the only solution, but is probably only a temporary fix. This is most likely caused by too many apps on the phone and it just freaked out on something eventually.
I think these options might work for you, however I cannot confirm since I have rooted my phone from day one and never looked back:
Power button + up volume= recovery
Thanks GPFboy for your fast response,
GPFboyJS said:
Well the Red exclamation mark means that there is a problem with the phone reading the build path. Since you have never rooted the phone, this would mean that the files got corrupt on the phone. With a non-rooted phone a Factory Reset is about the only solution, but is probably only a temporary fix.
Click to expand...
Click to collapse
As far as I understand a factory reset results in a complete loss of data on the phone, right? So without root/unlock there's no chance to get my data from the phone? That would be really bad.
GPFboyJS said:
This is most likely caused by too many apps on the phone and it just freaked out on something eventually.
Click to expand...
Click to collapse
What is "too many"? I think there are about 35 apps installed atm. By the moment the problem arose wifi and 3g-data,BT,GPS were disabled and just a minute before I took a look how late it was. So nothing special.
GPFboyJS said:
I think these options might work for you, however I cannot confirm since I have rooted my phone from day one and never looked back:
Power button + up volume= recovery
Click to expand...
Click to collapse
The phone reaches fastboot mode, but when selecting recovery mode I get the google logo and after that the open android with the red exclamation mark. That doesn't look good, does it?
BrainSD said:
The phone reaches fastboot mode, but when selecting recovery mode I get the google logo and after that the open android with the red exclamation mark. That doesn't look good, does it?
Click to expand...
Click to collapse
thats stock recovery.
is your bootloader already unlocked or no?
Zepius said:
is your bootloader already unlocked or no?
Click to expand...
Click to collapse
It's still locked.
you might try and go into recovery,
then press (i think) power and vol up and try and see if you can wipe just cache.
Zepius said:
you might try and go into recovery,
then press (i think) power and vol up and try and see if you can wipe just cache.
Click to expand...
Click to collapse
ok, I tried that several time now, but it didn't work. The only thing when I select recovery and press the power button is that I get the google logo and then the dead android + red exclamation sign, but this screen is scrambled and shows flickering pixels as shown in one of my pictures in the first post. So recovery mode seems not to work for me?
Is there a software or hardware problem with my device?
BrainSD said:
ok, I tried that several time now, but it didn't work. The only thing when I select recovery and press the power button is that I get the google logo and then the dead android + red exclamation sign, but this screen is scrambled and shows flickering pixels as shown in one of my pictures in the first post. So recovery mode seems not to work for me?
Is there a software or hardware problem with my device?
Click to expand...
Click to collapse
You can try to unlock your boorloader and flash a custom recovery like cwm or twrp. Maybe that helps. You can always go back and re lock it.
Sent from my Galaxy Nexus using XDA Premium HD app
mrgnex said:
You can try to unlock your boorloader and flash a custom recovery like cwm or twrp. Maybe that helps. You can always go back and re lock it.
Sent from my Galaxy Nexus using XDA Premium HD app
Click to expand...
Click to collapse
He wants to keep his data... which, at this point, seems rather impossible.
If fastboot doesn't solve it, i would try omapflash, OP. That "flickering" doesn't look good.
beekay201 said:
He wants to keep his data... which, at this point, seems rather impossible.
If fastboot doesn't solve it, i would try omapflash, OP. That "flickering" doesn't look good.
Click to expand...
Click to collapse
Well if I was him I would be more worried about my expensive phone instead of data. Maybe a lesson for later to have a backup
Sent from my Galaxy Nexus using XDA Premium HD app
beekay201 said:
He wants to keep his data... which, at this point, seems rather impossible.
If fastboot doesn't solve it, i would try omapflash, OP. That "flickering" doesn't look good.
Click to expand...
Click to collapse
Yes exactly this is the point. Since I don't have a current data backup the first thing to try is getting my data from the phone. I already tried temporary loading the clockwork recovery through fastboot - with the galaxy nexus toolkit and by hand(sdk) - but it failed ("Bootloader locked").
What I'm wondering about is the fact that the phone seems to behave normally in odin and fastbood mode but going nuts the moment it's expected to boot. Besides the flickering google logo and the "matrix-modded" dead android it even ended up in a totally green screen one time.
At the moment I don't dare trying to unlock/flash the phone because of being afraid getting stuck and ending up with the phone being in some kind of undefined / totally broken state. Initially I was in hope of being able to rescue my data but now i will try my luck with docomo support first.
As far as I understood omapflash is primary used for recovering bricked phones not even starting to odin/fastboot mode. But thanks to your hint I found http://forum.xda-developers.com/showthread.php?t=2016628 "Unlock bootloader on GT-I9250 without wipe and without root" This might bring some chance for data access.
I will try to get through 1 to 4 of the guide first and see how far I get.
If this won't work I might try to unlock, recover and try to "undelete" what's possible. (http://forum.xda-developers.com/showthread.php?t=1994705)
Does this order make sense?
Btw, having a dead phone is bad, of course, even when I got it new for 2300Yen but loosing some pictures i really liked and having no phone atm currently hurts more. Especially when knowing that I was thinking of copying all photos to my computer only one day before when I pulled only some minor important ones from the phone I needed for work and planned to do a full backup and unlock this weekend when I get back my 'Milestone' currently lent to someone else.
Once again something I learned. Backup! Even you phone.
BrainSD said:
As far as I understood omapflash is primary used for recovering bricked phones not even starting to odin/fastboot mode. But thanks to your hint I found http://forum.xda-developers.com/showthread.php?t=2016628 "Unlock bootloader on GT-I9250 without wipe and without root" This might bring some chance for data access.
Click to expand...
Click to collapse
!!!
It will work actually, I read/also replied to that thread! I had forgotten about it, sorry. I must say that if you had already read the stickies that matter, you'd already know about it.
It will unlock your bootloader, bypassing fastboot. Still, it's not for the faint hearted. I refered to omapflash because its a low level tool, it doesn't require the bootloader to be unlocked, and is able to restore the bootloader to working state, and I got there because you mentioned you see graphical glitches/flickering which may indicate bootloader partition failure and/or consequent corruption.
I think that's your best shot at trying to get your data back. After unlock, boot to fastboot and 'fastboot boot custom_recovery.img', and grab your stuff (if you can) from /data/.
beekay201 said:
!!!
It will work actually, I read/also replied to that thread! I had forgotten about it, sorry. I must say that if you had already read the stickies that matter, you'd already know about it.....
Click to expand...
Click to collapse
Your hint was very helpful for me getting the right direction since I'm just starting to dig into all this stuff.
Unlocking went quite well. Writing back to the phone worked without a problem and after that it's shown as unlocked in fastboot mode.
It even started loading clockwork recovery with fastboot. But the initial cw recovery screen (their logo and the cw recovery footer) was already shown on a scattered screen (google logo + unlocked lock was fine). After that the usb port connected and disconnected several times, then the screen went blank.
May this be because of corrupted fs or defective hw?
From my understanding with omapflash one have raw access to the phones internal memory similar to with dd on Unix/Linux. So currently I'm trying to dump ("upload") the emmc from the phone - actually in smaller chunks since omapflash needs to allocate all the memory in advance for the upload and to prevent interruptions. This will take a while...
After that I want to try to 'cat' the parts together and mount the filesystem - might be possible to do this from linux since it seems to be ext4 filesystems
BrainSD said:
Your hint was very helpful for me getting the right direction since I'm just starting to dig into all this stuff.
Unlocking went quite well. Writing back to the phone worked without a problem and after that it's shown as unlocked in fastboot mode.
It even started loading clockwork recovery with fastboot. But the initial cw recovery screen (their logo and the cw recovery footer) was already shown on a scattered screen (google logo + unlocked lock was fine). After that the usb port connected and disconnected several times, then the screen went blank.
May this be because of corrupted fs or defective hw?
From my understanding with omapflash one have raw access to the phones internal memory similar to with dd on Unix/Linux. So currently I'm trying to dump ("upload") the emmc from the phone - actually in smaller chunks since omapflash needs to allocate all the memory in advance for the upload and to prevent interruptions. This will take a while...
After that I want to try to 'cat' the parts together and mount the filesystem - might be possible to do this from linux since it seems to be ext4 filesystems
Click to expand...
Click to collapse
Great, so far so good.
Yeah, they're ext4 images, but sparse images i believe - link
I am in a position where the phone freezes and bootloops but I can flash stuff on fastboot, so I flashed entire stock image and imma gonna RMA. Should I lock the bootloader also or send it like that? could they give problems?
Considering that you can harm your hardware modifying the ROM, overcloking,etc... I would be better to block it so they can't say that your damaged it.
Does it happens a lot?
I just sent mine in today for RMA. Fingerprint scanner gave up the ghost 10 days after Google's warranty period. Since I had to factory reset anyway I just flashed everything stock in fastboot and then locked the bootloader. I can't think of any reason not to if you're flashing stock anyway.
Paco_LUE said:
Considering that you can harm your hardware modifying the ROM, overcloking,etc... I would be better to block it so they can't say that your damaged it.
Does it happens a lot?
Click to expand...
Click to collapse
jgummeson said:
I just sent mine in today for RMA. Fingerprint scanner gave up the ghost 10 days after Google's warranty period. Since I had to factory reset anyway I just flashed everything stock in fastboot and then locked the bootloader. I can't think of any reason not to if you're flashing stock anyway.
Click to expand...
Click to collapse
The problem is that even if I flashed everything stock, if while locking it it freezes or restarts like randomly hapens and then something goes wrong, and the phone shows the red screen on bot and doesn't boot, I won't be able to do anything fron that point since I won't be able to boot to change the allow oem unlocking option in settings. And I don't know what they can say with that.
I mean, after a problem I had due to EFS corruption bug that TWRP 3.0.2-1 had, in some point I reflashed the entire rom via a total OTA, and after that, with everything stock, and the bootloader unlocked, it didn't show the orange unlocking screen, but shown the red one!!!!!! (which is something impossible to happen if we follow the diagram from google itself, but it did..), so I am not sure if even after flashing the entire stock something like this may happen .
Thanks a lot!
RusherDude said:
The problem is that even if I flashed everything stock, if while locking it it freezes or restarts like randomly hapens and then something goes wrong, and the phone shows the red screen on bot and doesn't boot, I won't be able to do anything fron that point since I won't be able to boot to change the allow oem unlocking option in settings. And I don't know what they can say with that.
I mean, after a problem I had due to EFS corruption bug that TWRP 3.0.2-1 had, in some point I reflashed the entire rom via a total OTA, and after that, with everything stock, and the bootloader unlocked, it didn't show the orange unlocking screen, but shown the red one!!!!!! (which is something impossible to happen if we follow the diagram from google itself, but it did..), so I am not sure if even after flashing the entire stock something like this may happen .
Thanks a lot!
Click to expand...
Click to collapse
Are you sure that you used a stock imagen? Original bootloader as well?
Paco_LUE said:
Are you sure that you used a stock imagen? Original bootloader as well?
Click to expand...
Click to collapse
Yep, it was after flashing an stock total OTA on stock recovery. So all partitions were signed by google, and a red warning appeared instead of the bootloader warning one, which if you follow android developers guide for booting sequence, it says that this can't happen, but it did and got me really scared lol.
Even that has bugs, and I experienced that one lol..
Just got the XL on Friday. Loved it.
Unlocked the bootloader about 45 minutes ago. Wiped upon reboot (as normal). Google logo displayed with progress bar but the animation never stopped.
Downloaded the factory image from Nov. Ran the flash-all.bat from bootloader. No errors. Rebooted. Got a "Your device is corrupt" error. Phone stuck on the Google boot screen. Going into recovery just gives me a dead droid.
Attempting to flash the 8.1 developer preview results in the same issue. As of right now, nothing seems to boot at all. I've changed USB-C cables, since I've read about those causing issues, but still the same.
derekr44 said:
Just got the XL on Friday. Loved it.
Unlocked the bootloader about 45 minutes ago. Wiped upon reboot (as normal). Google logo displayed with progress bar but the animation never stopped.
Downloaded the factory image from Nov. Ran the flash-all.bat from bootloader. No errors. Rebooted. Got a "Your device is corrupt" error. Phone stuck on the Google boot screen. Going into recovery just gives me a dead droid.
Attempting to flash the 8.1 developer preview results in the same issue. As of right now, nothing seems to boot at all. I've changed USB-C cables, since I've read about those causing issues, but still the same.
Click to expand...
Click to collapse
I have no experience with your issue but it sounds like a soft brick. Im sure if you follow this guide ypu can fix it. https://forum.xda-developers.com/pixel-2-xl/how-to/guide-unlock-flash-root-pixel-2-xl-t3702418 hopefully this helps until someone who really knows can help you.
Dielahn said:
I have no experience with your issue but it sounds like a soft brick. Im sure if you follow this guide ypu can fix it. https://forum.xda-developers.com/pixel-2-xl/how-to/guide-unlock-flash-root-pixel-2-xl-t3702418 hopefully this helps until someone who really knows can help you.
Click to expand...
Click to collapse
That simple thread actually gave me an idea. I grabbed the latest SDK tools. Presto!
Note to anyone else with this issue...
derekr44 said:
Just got the XL on Friday. Loved it.
Unlocked the bootloader about 45 minutes ago. Wiped upon reboot (as normal). Google logo displayed with progress bar but the animation never stopped.
Downloaded the factory image from Nov. Ran the flash-all.bat from bootloader. No errors. Rebooted. Got a "Your device is corrupt" error. Phone stuck on the Google boot screen. Going into recovery just gives me a dead droid.
Attempting to flash the 8.1 developer preview results in the same issue. As of right now, nothing seems to boot at all. I've changed USB-C cables, since I've read about those causing issues, but still the same.
Click to expand...
Click to collapse
By the way, the dead Droid is recovery, from that screen, hold power and press up for recovery menu, in case you ever get stuck again
And just for future reference for others who may be in a similar issue and stumble across this thread...
As long as you've successfully unlocked your bootloader and "fastboot devices" successfully pulls up your device, you'll be just fine. You just gotta take a step back, breath and then make sure your SDK tools are updated before moving forward.
if the flash tool isn't working, use my script:
https://forum.xda-developers.com/pi...ol-deuces-bootloop-recovery-flashing-t3704761
i know this is probably going to sound really stupid but somehow i bricked my phone as well....not exactly sure what happened but it had to do with something after installing/booting TWRP. anyway, i am stuck with nothing on my phone and can't seem to do anyting....derek, how did you use sdk to fix???
*edit I can't even have fastboot devices pull my phone....am i really f'ed?
warlord1352 said:
i know this is probably going to sound really stupid but somehow i bricked my phone as well....not exactly sure what happened but it had to do with something after installing/booting TWRP. anyway, i am stuck with nothing on my phone and can't seem to do anyting....derek, how did you use sdk to fix???
*edit I can't even have fastboot devices pull my phone....am i really f'ed?
Click to expand...
Click to collapse
If you cannot get the Bootloader to load, then you are seriously SOL. You have a hard bricked device.
Only thing you can do now is raise a support case with Google and hope that allow you to get a replacement with the only explanation being, "The phone restarted on it's own and never came back up." Or something similar and vague without expressly telling them what you did.
warlord1352 said:
i know this is probably going to sound really stupid but somehow i bricked my phone as well....not exactly sure what happened but it had to do with something after installing/booting TWRP. anyway, i am stuck with nothing on my phone and can't seem to do anyting....derek, how did you use sdk to fix???
*edit I can't even have fastboot devices pull my phone....am i really f'ed?
Click to expand...
Click to collapse
Make sure you try a different cable to connect your phone to your PC.. I had the same issue, and I try two different cable before my device accepted the flash-all
Okay, so somehow fortunately I was able to get back into my TWRP 1 last time and able to push my files I needed to boot it back up...
Raistline said:
If you cannot get the Bootloader to load, then you are seriously SOL. You have a hard bricked device.
Only thing you can do now is raise a support case with Google and hope that allow you to get a replacement with the only explanation being, "The phone restarted on it's own and never came back up." Or something similar and vague without expressly telling them what you did.
Click to expand...
Click to collapse
The funny thing is I was able to and was in bootloader but I couldn't use any commands from my computer (as far as I know) which is why I was freaking out.
I should've but I didn't actually try using other cables. I did try other usb ports but that didn't do anything.
I still kind of believe that my phone (somehow) got messed up from loading TWRP. I don't know if it's because it is still beta or what but I am like 99% sure it was from that as I can't see anything else being the problem.
warlord1352 said:
i know this is probably going to sound really stupid but somehow i bricked my phone as well....not exactly sure what happened but it had to do with something after installing/booting TWRP. anyway, i am stuck with nothing on my phone and can't seem to do anyting....derek, how did you use sdk to fix???
*edit I can't even have fastboot devices pull my phone....am i really f'ed?
Click to expand...
Click to collapse
just install the lastest fastboot and adb drivers from google and flash the factory image using commands or use any script .
after that everytime my phone got stuck on google logo .
how i fixed - Temporary boot twrp beta2 recovery using cmd (fastboot boot abc.img) "here abc refers to the correct name of the img file" and once booted into recovery go to advanced and select Partition A and reboot.
It will boot up just fine
Here is the link for a script that will flash both partitions with stock image
https://forum.xda-developers.com/pi...ol-deuces-bootloop-recovery-flashing-t3704761
derekr44 said:
Just got the XL on Friday. Loved it.
Unlocked the bootloader about 45 minutes ago. Wiped upon reboot (as normal). Google logo displayed with progress bar but the animation never stopped.
Downloaded the factory image from Nov. Ran the flash-all.bat from bootloader. No errors. Rebooted. Got a "Your device is corrupt" error. Phone stuck on the Google boot screen. Going into recovery just gives me a dead droid.
Attempting to flash the 8.1 developer preview results in the same issue. As of right now, nothing seems to boot at all. I've changed USB-C cables, since I've read about those causing issues, but still the same.
Click to expand...
Click to collapse
Something similar for me but with different reason for starting all this. When I did sideload of 8.1 all went well but my camera wasn't working (I saw the same thing in 8.1 DP) so I needed to go back to 8.0 but you can't sideload downgrade. I went to Google to get replacement sent and figure I might try to sort things out with this one in the meantime. I had to unlock to be able to just flash the factory 8.0 image so did that with both the unlock commands, then after that and after update I just got hung on the white screen with google logo. I was able to get back to bootloader with the power button + volume from off and from there I would get to the screen with the android and the exclamation point - I think you hold volume up and then power to go to sideload. Once there I just sideloaded 8.0 and all was good. I do still get the warning about corrupt whatever and have to hit power on reboot or fresh power up but I could redo the locks and whatnot and all seems fine now with camera working.
At the least I got camera back while waiting for replacement.
b4db0ys said:
just install the lastest fastboot and adb drivers from google and flash the factory image using commands or use any script .
after that everytime my phone got stuck on google logo .
how i fixed - Temporary boot twrp beta2 recovery using cmd (fastboot boot abc.img) "here abc refers to the correct name of the img file" and once booted into recovery go to advanced and select Partition A and reboot.
It will boot up just fine
Here is the link for a script that will flash both partitions with stock image
https://forum.xda-developers.com/pi...ol-deuces-bootloop-recovery-flashing-t3704761
Click to expand...
Click to collapse
This cleaned things up for me - still no camera in 8.1 but I got the replacement coming.
So I'm in the same boat as the OP but my bootloader is locked. Am I totally screwed? Is there a way to do any of this when the device won't show up in ADB?
Deuces said:
if the flash tool isn't working, use my script:
https://forum.xda-developers.com/pi...ol-deuces-bootloop-recovery-flashing-t3704761
Click to expand...
Click to collapse
can you just develop some scripts that working on locked bootloader ?
i have a bricked Pixel xl with locked bootloader and oem locked
If you can boot twrp but can't connect to a pc, a type c flash drive comes in handy. Load it with the needed ota, twrp installer zip and Just mount it and you're good to go.
My pixel xl(1st gen) purchased from Google store in Jan 2017, and in bootloop a week ago.
I contact google support, they told me my device out of the 1-yr warranty, and redirect me to UbreakIfix for repair, cost on myself.
I contacted UbreakIfix, get a quote for 300+ to change motherboard.
As of today, the Pixel XL only worth $130 trade-in value, and the condition need to be perfect.
So clearly I won't spend $300 to save a device only worth $130.
About the issue, I had some level of experience with fastboot/adb command:
* tried re-image all latest Google Stock Image of Android 7/8/9 individually with boot-loader unlocked, no luck;
* tried adb sideload ota image of Android 7/8/9 individually, with boot-loader locked/unlocked, no luck;
* tried change active slot to a and b with combination of above two items, no luck;
* checked the recovery logs, the boot-loader did take whatever Android stock image I feed to to it, and I do almost every time can get in to both boot-loader or recovery-mode successfully, and has no limit to run any fastboot/adb commands, but these are all I can do, and still not to get the phone boot into Android OS.
* in a very few times, the static "Google" in the white screen did spinning into a big rainbow "G", but it was frozen right after, and eventually reboot again.
I don't know if it worth spend more time on it, and feel very frustrated about spending my time on this doomed device and dealing with the Giant company as a individual customer.
I am not a picky guy, I accept the device running slow, or buggy sometime, but doesn't accept it dead in 2 years as a premium phone.
What do you think, guys?
By the way, many thanks to XDA forum, I learnt a lot from many brilliant and kind people here.
It's not acceptable, but it's the norm. Look at buying a new tv - Some mfg warranties are like 90 days labor and 6 months to a year on parts...It's a shame you pay all that money for something that could be a paperweight in a year.
Acceptable for a phone, or any gadget worth $800 to die in 21 months? LMAO. If this acceptable to some group of people, please redirect them to the best psychic facility available on this planet.
Like you said, you can just grab another one for $130. Phones are put through a lot and used every day so it's hard to say. Lots of people have no issues for several years.
Sent from my Pixel XL using Tapatalk
lafester said:
Like you said, you can just grab another one for $130. Phones are put through a lot and used every day so it's hard to say. Lots of people have no issues for several years.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
I used my Pixel as a regular way, never root it, never even boot into bootloader before the bootloop issue, always use ota in os to get update. No water spilt, never get drop or hit. In another word, I never "abuse" the phone, and the phone has no accident.
Yeah, whatever, for the phone issue, I'm just having bad luck, like you said, many people have no issues. What I upset about is a $800 phone became a brick within 2 years with a normal usage, and Google not even give this case as an exception to cover it out of warranty.
You may say, or like Google said, then what the warranty stands for, right? I say, if only a few people got this issue, then as a Giant company, should cover since no fault on customer, and it would be a small cost to Google; if a lot of people got this issue, then still Google need to cover, since it becomes a general issue to this phone, which indicates this is a failed model at all.
Please don't think I'm a cheap guy, and trying to take advantage from Google, just trying to think the logical here. BTW, I'm not just complaining Google without putting in effort to solve the issue by myself, I did a little bit research and pickup learning, regard this issue, I'm not alone, many other users have the same issue as well, some of them get it "resolved" by reimage, but the other just has no luck like me.
You don't have to agree with me, I'm a kind of guy would love to discuss with people no matter they have same point view as mine or not.
What is the actual problem with the phone? You can get into the boot loader screen then correct? When you try to install the latest stock factory image from Google with fastboot what happens?
Phalanx7621 said:
What is the actual problem with the phone? You can get into the boot loader screen then correct? When you try to install the latest stock factory image from Google with fastboot what happens?
Click to expand...
Click to collapse
Both the boot-loader and recovery-mode functions are normal. after flash in the stock factory image, all the progress logs shows flawless, and phone will reboot itself upon the progress is successfully complete. Instead of going into Android OS, the phone is stuck on a white screen with colorful "GOOGLE" in screen center, after like about 30 seconds, it reboots again, and if you leave the phone there, you will see it sometime just keep rebooting, showing the logo screen, or it goes into recovery-mode, showing "no command" black screen.
Lei.SHI said:
Both the boot-loader and recovery-mode functions are normal. after flash in the stock factory image, all the progress logs shows flawless, and phone will reboot itself upon the progress is successfully complete. Instead of going into Android OS, the phone is stuck on a white screen with colorful "GOOGLE" in screen center, after like about 30 seconds, it reboots again, and if you leave the phone there, you will see it sometime just keep rebooting, showing the logo screen, or it goes into recovery-mode, showing "no command" black screen.
Click to expand...
Click to collapse
I'm having the exact same issue and Phalanx7621 tried helping me out but unfortunately it looks like there's no solution for it.. Just like your issue, everything successfully flashes, but I got a little past the Google logo a couple of times, but no more. My phone wasn't dropped, never wet, nothing at all. Yesterday morning I woke up and the screen was just black and it started boot looping.
Funnily enough, 2 weeks after I paid the phone off. 1 week after Verizon called to let me know they had open enrollment on their insurance plans and I turned it down since, yanno, I don't mistreat my phone.. "Coincidence" I guess..
My post btw https://forum.xda-developers.com/pixel-xl/help/possibly-bricked-t3861057#post78033420 if any of that helps you hopefully.
That is the weirdest thing. So everything flashes and it reboots like it's going into the operating system and then just reboots in a boot loop? unless someone else times in its possible is a hardware failure.
Lei.SHI said:
Both the boot-loader and recovery-mode functions are normal. after flash in the stock factory image, all the progress logs shows flawless, and phone will reboot itself upon the progress is successfully complete. Instead of going into Android OS, the phone is stuck on a white screen with colorful "GOOGLE" in screen center, after like about 30 seconds, it reboots again, and if you leave the phone there, you will see it sometime just keep rebooting, showing the logo screen, or it goes into recovery-mode, showing "no command" black screen.
Click to expand...
Click to collapse
Phalanx7621 said:
That is the weirdest thing. So everything flashes and it reboots like it's going into the operating system and then just reboots in a boot loop? unless someone else times in its possible is a hardware failure.
Click to expand...
Click to collapse
I've made it far enough in to setup my device, receive and send a text message and then it will completely freeze up for a few seconds and restart. Then it may or may not make it past the Google logo, usually it'll stick on the Google logo or the G before freezing and restarting. But one out of every dozen or two restarts it'll load all the way into the OS before freezing and restarting after a few minutes.
premedicated said:
I've made it far enough in to setup my device, receive and send a text message and then it will completely freeze up for a few seconds and restart. Then it may or may not make it past the Google logo, usually it'll stick on the Google logo or the G before freezing and restarting. But one out of every dozen or two restarts it'll load all the way into the OS before freezing and restarting after a few minutes.
Click to expand...
Click to collapse
Ok so how about downloading TWRP on your PC and flash kernel on your phone, (https://forum.xda-developers.com/pixel-xl/development/marlin-flash-kernel-1-00-t3788300) put TWRP in the same folder as fastboot on your PC and reboot into boot loader and fastboot boot TWRP.img ( or whatever you named TWRP) . From TWRP, flash Flash kernel, then reboot and see if it boots into Android.
Phalanx7621 said:
Ok so how about downloading TWRP on your PC and flash kernel on your phone, (https://forum.xda-developers.com/pixel-xl/development/marlin-flash-kernel-1-00-t3788300) put TWRP in the same folder as fastboot on your PC and reboot into boot loader and fastboot boot TWRP.img ( or whatever you named TWRP) . From TWRP, flash Flash kernel, then reboot and see if it boots into Android.
Click to expand...
Click to collapse
Sure. Gimme a couple minutes and I'll report back
---------- Post added at 08:15 PM ---------- Previous post was at 07:40 PM ----------
Phalanx7621 said:
Ok so how about downloading TWRP on your PC and flash kernel on your phone, (https://forum.xda-developers.com/pixel-xl/development/marlin-flash-kernel-1-00-t3788300) put TWRP in the same folder as fastboot on your PC and reboot into boot loader and fastboot boot TWRP.img ( or whatever you named TWRP) . From TWRP, flash Flash kernel, then reboot and see if it boots into Android.
Click to expand...
Click to collapse
So it loaded up TWRP, then I remembered that I didn't set a pin after the latest reflash. So I went into software and setup a pin and moved the TWRP files over onto the phone as well as the kernal before it restarted. But now I can't get 'fastboot boot twrp.img' to actually load TWRP on the phone.. Command prompt says "downloading boot.img, booting, finished. And then on the phone it loads up the google logo and then just freezes and restarts.. I'll dink with it some more and see if i can make it work
Yeah you don't want a pin or password in TWRP. Any pin or password would've been erased with the wiping we did via fastboot earlier before we installed the newest factory image.
Phalanx7621 said:
Yeah you don't want a pin or password in TWRP. Any pin or password would've been erased with the wiping we did via fastboot earlier before we installed the newest factory image.
Click to expand...
Click to collapse
Alright so I guess I'll wipe everything again, then get far enough into the software to pull TWRP and the Kernel over? Or is there a way I can do all that from fastboot?
premedicated said:
Alright so I guess I'll wipe everything again, then get far enough into the software to pull TWRP and the Kernel over? Or is there a way I can do all that from fastboot?
Click to expand...
Click to collapse
If I were you I would wipe everything with fast boot and flash-all.bat again. See if you can get it to boot up once into Android, then reboot to the bootloader, fastboot boot TWRP.img and from TWRP because it's connected to your PC it will allow you to transfer files. download The flash kernel on your PC and just transfer it over to your phone and flash it, then reboot into Android to see if it works. But be careful whenever you reboot for the first time from TWRP because it will ask you to install TWRP as a system file or something. make sure to always hit do not install because if you swipe it will install it. That can definitely mess things up.
Phalanx7621 said:
If I were you I would wipe everything with fast boot and flash-all.bat again. See if you can get it to boot up once into Android, then reboot to the bootloader, fastboot boot TWRP.img and from TWRP because it's connected to your PC it will allow you to transfer files. download The flash kernel on your PC and just transfer it over to your phone and flash it, then reboot into Android to see if it works. But be careful whenever you reboot for the first time from TWRP because it will ask you to install TWRP as a system file or something. make sure to always hit do not install because if you swipe it will install it. That can definitely mess things up.
Click to expand...
Click to collapse
Well, knock on wood, I'm about 10 minutes into it and it seems to still be working.. But earlier it was on for a good bit of time before restarting as well. I'll report back!
premedicated said:
Well, knock on wood, I'm about 10 minutes into it and it seems to still be working.. But earlier it was on for a good bit of time before restarting as well. I'll report back!
Click to expand...
Click to collapse
Excellent ! Ok, so let's install magisk via TWRP. You'll need to boot back into TWRP via fastboot using fastboot boot TWRP.img and then transfer Magisk (https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445) onto your phone. After flashing , reboot and install kernel auditor here https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor so we can see what's going on with the kernel
Edit:also, you could flash TWRP with this file as well https://dl.twrp.me/marlin/twrp-pixel-installer-marlin-3.2.3-1.zip.html (you flash the zip while in TWRP) to not have to use fastboot to boot into it )
Phalanx7621 said:
Excellent ! Ok, so let's install magisk via TWRP. You'll need to boot back into TWRP via fastboot using fastboot boot TWRP.img and then transfer Magisk (https://github.com/topjohnwu/Magisk/releases/download/v17.1/Magisk-v17.1.zip) onto your phone. After flashing , reboot and install kernel auditor here https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor so we can see what's going on with the kernel
Edit:also, you could flash TWRP with this file as well https://dl.twrp.me/marlin/twrp-pixel-installer-marlin-3.2.3-1.zip.html (you flash the zip while in TWRP) to not have to use fastboot to boot into it )
Click to expand...
Click to collapse
Done, done and done.
I flashed TWRP through the zip, so it's a more permanent fixture. Magisk is installed as well as the kernel adiutor. What type of data/info am i looking for through the kernel program?
---------- Post added at 11:19 PM ---------- Previous post was at 10:47 PM ----------
Phalanx7621 said:
Excellent ! Ok, so let's install magisk via TWRP. You'll need to boot back into TWRP via fastboot using fastboot boot TWRP.img and then transfer Magisk (https://github.com/topjohnwu/Magisk/releases/download/v17.1/Magisk-v17.1.zip) onto your phone. After flashing , reboot and install kernel auditor here https://play.google.com/store/apps/details?id=com.grarak.kerneladiutor so we can see what's going on with the kernel
Edit:also, you could flash TWRP with this file as well https://dl.twrp.me/marlin/twrp-pixel-installer-marlin-3.2.3-1.zip.html (you flash the zip while in TWRP) to not have to use fastboot to boot into it )
Click to expand...
Click to collapse
Apparently i didn't knock on wood hard enough. Was working for a solid 45 minutes to an hour, but then as I was reading through some stuff it froze up and went back into boot looping..
premedicated said:
Done, done and done.
I flashed TWRP through the zip, so it's a more permanent fixture. Magisk is installed as well as the kernel adiutor. What type of data/info am i looking for through the kernel program?
---------- Post added at 11:19 PM ---------- Previous post was at 10:47 PM ----------
Apparently i didn't knock on wood hard enough. Was working for a solid 45 minutes to an hour, but then as I was reading through some stuff it froze up and went back into boot looping..
Click to expand...
Click to collapse
No! OMG I'm sorry man. I thought we had this problem on its way to being solved. So it's now boot looping again ? Same exact thing as before ?
Phalanx7621 said:
No! OMG I'm sorry man. I thought we had this problem on its way to being solved. So it's now boot looping again ? Same exact thing as before ?
Click to expand...
Click to collapse
Well here's the deal.. Right after I posted that it started bootlooping again. It went through about 6 bootloops before I said 'eff it' and then just plugged it into the charger and walked away. I came back to it a little bit ago and according to the Kernel manager, it has an uptime of an hour and 32 minutes. So I grabbed it and was dinking around for a minute with it. Downloaded hulu, no problems. Downloaded netflix, no problems and then I was writing out a text and all of a sudden it froze and rebooted. Bootlooped once, then on the second try it started up. It's been up for about half an hour now.
Are there some sort of .log files with Android that could possibly show exactly what it is that's causing it to restart? Maybe something in the Kernel manager could help?
Hello! I think I've bricked my Pixel 6 Pro using Android 13, I rooted with Magisk successfuly but when I flashed kirisakura kernel using EXKM and rebooted it gave me a bootloop, after bootloop tried flashing patched boot.img from factory in Pixel Flasher but didn't work, also tried using adb and nothing. I think I have flashed the wrong file or something after kirisakura because it would show on Pixel Flasher with a ? at the beginning of the ADB connected devices.
It only would boot to Google logo and then restart, did it a few times but then the screen became black and unresponisive, I've tried vol down power and vol down power and vol down only and vol up power any combination for more than 30 seconds and nothing works, doesn't show on adb devices or wants to boot into any mode.
Did I completely brick my device flashing a wrong boot file after my bootloop? Is there any way to recover my Pixel 6 or should I try to return and ask for a new one and see if they accept it?
Sad thing, my Pixel arrived yesterday and I hard bricked it in the same day.
willing to pay anyone here if someone helps me to boot my pixel again.
Thanks in advance.
PunkOz said:
Hello! I think I've bricked my Pixel 6 Pro using Android 13, I rooted with Magisk successfuly but when I flashed kirisakura kernel using EXKM and rebooted it gave me a bootloop, after bootloop tried flashing patched boot.img from factory in Pixel Flasher but didn't work, also tried using adb and nothing. I think I have flashed the wrong file or something after kirisakura because it would show on Pixel Flasher with a ? at the beginning of the ADB connected devices.
It only would boot to Google logo and then restart, did it a few times but then the screen became black and unresponisive, I've tried vol down power and vol down power and vol down only and vol up power any combination for more than 30 seconds and nothing works, doesn't show on adb devices or wants to boot into any mode.
Did I completely brick my device flashing a wrong boot file after my bootloop? Is there any way to recover my Pixel 6 or should I try to return and ask for a new one and see if they accept it?
Thanks in advance.
Click to expand...
Click to collapse
Reflash the entire android 13 image
DespairFactor said:
Reflash the entire android 13 image
Click to expand...
Click to collapse
How if it doesn't boot into fastboot or anything, PC won't recognize anything since my Pixel's screen is completely black, won't do a single thing, just a sandwich glass, won't even show if it's charging, nothing.
Read this thread if you haven't...
blackhawk said:
Read this thread if you haven't...
Click to expand...
Click to collapse
Everything downloaded to my PC belongs to Android 13, factory image, kernel, everything, didn't rollback, I was in a bootloop where my device went into fastboot mode everytime but then it went to google logo and stopped working at all. Nothing shows on my screen, I've read somewhere on reddit that a guy had the same problem and had to return his device.
PunkOz said:
Everything downloaded to my PC belongs to Android 13, factory image, kernel, everything, didn't rollback, I was in a bootloop where my device went into fastboot mode everytime but then it went to google logo and stopped working at all. Nothing shows on my screen, I've read somewhere on reddit that a guy had the same problem and had to return his device.
Click to expand...
Click to collapse
Yeah I've been watching this out of curiosity as I run Samsung's on 9 and 10. That thread has a lot of good information and links. Someone there may be able to help.
I thought 13 be fubar, it hasn't disappointed
I know you said you tried all combinations of buttons, but when pressing power+volume down, have you tried "fastboot devices" in terminal to see if the device ID shows?
If you can get into fastboot even with no display, you should be able to reflash the factory images.
Edit:
Also, if you're going to try flash custom kernels and want an easy app to use, I'd recommend installing Kernel Flasher as it'll backup all of the modified images and allows you to check the partitions.
lottarake said:
I know you said you tried all combinations of buttons, but when pressing power+volume down, have you tried "fastboot devices" in terminal to see if the device ID shows?
If you can get into fastboot even with no display, you should be able to reflash the factory images.
Click to expand...
Click to collapse
Yes, went to platform tools and used cmd adb devices and nothing shows. It's like stuck booting maybe (?) but with a black screen and won't let me do anything, I'm not even sure if it's charging, I think the only way to reset is remove battery and put it back but it may void my warranty, waiting for it to discharge is impossible as it was 95% charge.
Edit: Will try kernel flasher if I ever get it to boot again. I think my last option is to return it and hope to get a new one, it's my first time hard bricking a device and I've done countless kernels and custom roms since Galaxy S2 and Nexus devices
@PunkOz can you describe exactly how you updated? Did you attempt to flash the custom kernel immediately after the update, or did you let Android 13 boot normally on the stock kernel?
PunkOz said:
Yes, went to platform tools and used cmd adb devices and nothing shows. It's like stuck booting maybe (?) but with a black screen and won't let me do anything, I'm not even sure if it's charging, I think the only way to reset is remove battery and put it back but it may void my warranty, waiting for it to discharge is impossible as it was 95% charge.
Edit: Will try kernel flasher if I ever get it to boot again. I think my last option is to return it and hope to get a new one, it's my first time hard bricking a device and I've done countless kernels and custom roms since Galaxy S2 and Nexus devices
Click to expand...
Click to collapse
ADB and fastboot display different device IDs. You'll want fastboot vs adb when in fastboot mode.
If you can't get it to display and want to get a new pixel, hopefully you're within the return window and can exchange it easily.
Edit:
Reread your OP and the reason you bootlooped from what I gather is that you manually flashed the stock boot.img and kernels now modify more than just the boot.img, so you're in conflict with dtbo, vendor_boot, and vendor_dlkm images. When returning to stock with a custom kernel, you'll need to be sure reflash all of these from the factory zip.
PunkOz said:
Yes, went to platform tools and used cmd adb devices and nothing shows. It's like stuck booting maybe (?) but with a black screen and won't let me do anything, I'm not even sure if it's charging, I think the only way to reset is remove battery and put it back but it may void my warranty, waiting for it to discharge is impossible as it was 95% charge.
Edit: Will try kernel flasher if I ever get it to boot again. I think my last option is to return it and hope to get a new one, it's my first time hard bricking a device and I've done countless kernels and custom roms since Galaxy S2 and Nexus devices
Click to expand...
Click to collapse
it seems like you may have booted a kernel that didn't work, failed boot a few times and threw you onto the A12 bootloader. Would need to verify how you installed android 13
Following....
I have the same problem...blackscreen. All I did was use the command " fastboot flash boot patched_magisk.img”.
Easy solution: using chrome on your pc or mac go to pixel factory firmware and find the the newest update. Plug in your phone and click "flash", select your device, wipe everything and flash all partitions.
rajchelu said:
Following....
I have the same problem...blackscreen. All I did was use the command " fastboot flash boot patched_magisk.img”.
Click to expand...
Click to collapse
If you manage to fix it, I recommend booting the magisk image, instead of flashing it with the 'fastboot boot /patched_boot.img' command
Then direct install in magisk app
If it fails when booting the image, device will just reboot into normal mode.
PunkOz said:
Did I completely brick my device flashing a wrong boot file after my bootloop? Is there any way to recover my Pixel 6 or should I try to return and ask for a new one and see if they accept it?
Sad thing, my Pixel arrived yesterday and I hard bricked it in the same day.
willing to pay anyone here if someone helps me to boot my pixel again.
Click to expand...
Click to collapse
The good news is that your phone is still under warranty!
The bad news is that you now have to USE the warranty.
A13 includes anti-rollback code for the bootloader. Unfortunately, the anti-rollback code BRICKS the device instead of putting you into a recoverable state.
The sequence that killed you is this; you installed A13 and the updated bootloader to one slot, but not the other. You successfully booted A13 at least one time, which advanced the anti-rollback version. You then installed a kernel/boot that was incompatible with A13, which failed to boot a few times, causing it to switch to the other slot (with the old bootloader). Because it tried to run the old bootloader with the updated anti-rollback version, it immediately went into BRICK mode.
DespairFactor said:
it seems like you may have booted a kernel that didn't work, failed boot a few times and threw you onto the A12 bootloader. Would need to verify how you installed android 13
Click to expand...
Click to collapse
I think that's what happened, I installed Android 13 via OTA, had to apply for beta in order to receive the update faster because it wasn't available in my country yet.
Than installed patched boot - magisk - custom kernel via EXKM app and then bootloop and then flashed a few times boot stock and patched and nothing worked. @V0latyle
96carboard said:
The good news is that your phone is still under warranty!
The bad news is that you now have to USE the warranty.
A13 includes anti-rollback code for the bootloader. Unfortunately, the anti-rollback code BRICKS the device instead of putting you into a recoverable state.
The sequence that killed you is this; you installed A13 and the updated bootloader to one slot, but not the other. You successfully booted A13 at least one time, which advanced the anti-rollback version. You then installed a kernel/boot that was incompatible with A13, which failed to boot a few times, causing it to switch to the other slot (with the old bootloader). Because it tried to run the old bootloader with the updated anti-rollback version, it immediately went into BRICK mode.
Click to expand...
Click to collapse
Yeah, I haven't been around XDA community as much as before, it was 100% my fault, didn't read that much before starting to flash custom kernel and boot. Didn't know there were 2 slots. My phone is 100% dead now, I bought it through amazon from a third party store, do you think I voided my warranty? Screen won't turn on at all with any combination of keys (Pwr+Vol) and won't even display when it's charging, completely bricked
If anyone out there has an answer to fixing this problem. Please let us know! I'm also on the same boat. Didn't flash to both slots so now I have a paperweight. Really don't wanna spend money on a new phone so I'll try to be patient and hope someone can be my saviour
So does anyone have an update about this problem? I'v eread somewhere that it could be in EDL mode when the screen doesn't turn on. Could that be the case and could we do something with that?
Markelijk said:
So does anyone have an update about this problem? I'v eread somewhere that it could be in EDL mode when the screen doesn't turn on. Could that be the case and could we do something with that?
Click to expand...
Click to collapse
We don't have tools to deal with this processor's EDL mode, so unfortunately it's likely the only fix is to reach out to Google to have it repaired under warranty.
Shot in the dark here...but this reminds me of people only flashing to one slot and the phone rebooting into the other "okd OS" slot and the phone bricking. So this is a little different...the phone MIGHT be on, just on a big black screen that just shows nothing. So yes it IS "bricked".
But UNPLUG the phone, give it about 10 seconds, then press and hold power, volume up and volume down, preferably OUT of the case, and just hold it for like a minute. After thirty seconds or so it might forcefully reboot, if it does, then we need to get into fastboot and reflash A13, but then ALSO flash it to the other slit. This is why it is SO IMPORTANT to flash BOTH SLOTS.
I had THIS problem on my Oneplus 6T, yes...a different phone...but it my phone was DEAD for a week before I discovered that I could force boot it.
But if you have the phone connected to the pc, the bootloader or whatever is trying to talk will not allow the phone to do anything.
Also, plug the phone into the charger. If it is in a hard soft brick and the phone DIES it can be a NIGHTMARE to get it back to life, usually involving you JUMPING the battery manually....like I said. A shot in the dark. But worth a shot.