Related
Hello!
My friend had done a hard reset on her MI6 MIUI 9.2.3. and now she can't pass the login process to her Google account.
So far I've probably tried all possible ways from YT to unlock without interfering with the software, but nothing has worked.
Now I wanted to take the bootloader, but here the stairs begin, I don't have access to the settings on the phone, so I can't turn on the USB debugging, and without that I can't do much. So I have a question if anyone had such a problem and whether he found a solution,
power+volume down
long press until restart
rr
dlhxr said:
power+volume down
long press until restart
Click to expand...
Click to collapse
Hi! but this move me only to fastboot, where without debugging i can do nothing.
soundgardens said:
Hi! but this move me only to fastboot, where without debugging i can do nothing.
Click to expand...
Click to collapse
Mi unlock should work. Pretty sure debugging has nothing to do with anything outside of system.
There is another problem because she don't create MI account whit out this mi unlock don't work :/ any other option?
Hi, can someone help? I was about to flash the official whyred Linedage OS for my Redmi Note 5. I did that with note 3 and note 4 before, so kind of knew what I was doing.. But was not aware of the antirollback thing.. So after i decided to flash the new miui 10 firs for the firmware..(wasn't the best idea I know) and you know the rest.. something went wrong and now I am stuck with dead phone.. no recovery, no fastboot, nothing.. I had unlocked bootloader officially a few weeks ago, got the device connected with the mi account (not sure about if the account is authorized or not).
I tried the test point method - dissembling the device from miui dot com
I have the right driver listed in device manager (Qualcom HS-USB QDLoader 9008)
I tried several roms listed here or miui dot com
I tired several versions of MiFlash
Every time I only get the message about not reading the com port (tried all USB ports on two PCs, reinstalled drivers .. everything) .. It starts flashing "read hello packet", then after 5 seconds stops with the mesage "can not read from port comXY"
In edb its just waiting for the device on any command (or not devices found)
Anyone can help please? I spent the whole day searching for solution and found nothing, or nothing helps
thx in advance
I am in your same situation. did you solved it?
thank you
rfiore said:
I am in your same situation. did you solved it?
thank you
Click to expand...
Click to collapse
Yeah, posted my ID on the forum, got authorized, then used the "portable" miflash and it worked.. But on the other PC still got errors in miflash.. didn't even check for the authorization, so I suppose its PC related.. perhaps something with the drivers..
FKuzel said:
Hi, can someone help? I was about to flash the official whyred Linedage OS for my Redmi Note 5. I did that with note 3 and note 4 before, so kind of knew what I was doing.. But was not aware of the antirollback thing.. So after i decided to flash the new miui 10 firs for the firmware..(wasn't the best idea I know) and you know the rest.. something went wrong and now I am stuck with dead phone.. no recovery, no fastboot, nothing.. I had unlocked bootloader officially a few weeks ago, got the device connected with the mi account (not sure about if the account is authorized or not).
I tried the test point method - dissembling the device from miui dot com
I have the right driver listed in device manager (Qualcom HS-USB QDLoader 9008)
I tried several roms listed here or miui dot com
I tired several versions of MiFlash
Every time I only get the message about not reading the com port (tried all USB ports on two PCs, reinstalled drivers .. everything) .. It starts flashing "read hello packet", then after 5 seconds stops with the mesage "can not read from port comXY"
In edb its just waiting for the device on any command (or not devices found)
Anyone can help please? I spent the whole day searching for solution and found nothing, or nothing helps
thx in advance
Click to expand...
Click to collapse
I faced the similar situation. I pasted the ID in the russian and english forum. I got no message for weeks, I thought of flashing again, Voila. Device flashed and turned ON. Your device is hard bricked as mine, it needs authentication from Mi to flash via EDL mode. All you need to do is download the MI flash tool portable, and paste your Mi ID in forums.
Unfortunately both the forum's date to paste the ID has been expired. But still you try to get help from someone else from the forum or the moderators.
I'll explain different errors I faced and the solution for it.
"not reading the com port" --- You get this error when you flash Global version of the ROM. Use the Developer version of it.
"It starts flashing "read hello packet"" --- You get this error because edl is turned off in your phone. To turn it back ON, just remove the USB cable from your phone and then press the power button for 10-15 seconds. Then connect your phone back again and try to flash.
"edb its just waiting for the device on any command" --- Actually this is not an error. Your phone is hard bricked. While in hard bricked mode adb won't work. ADB works only in fastboot mode.
Simple.. Disconnect and Reconnect with your PC Via Testpoint.. Thanks.
thank you very much
Prabudeva005 said:
I faced the similar situation. I pasted the ID in the russian and english forum. I got no message for weeks, I thought of flashing again, Voila. Device flashed and turned ON. Your device is hard bricked as mine, it needs authentication from Mi to flash via EDL mode. All you need to do is download the MI flash tool portable, and paste your Mi ID in forums.
Unfortunately both the forum's date to paste the ID has been expired. But still you try to get help from someone else from the forum or the moderators.
I'll explain different errors I faced and the solution for it.
"not reading the com port" --- You get this error when you flash Global version of the ROM. Use the Developer version of it.
"It starts flashing "read hello packet"" --- You get this error because edl is turned off in your phone. To turn it back ON, just remove the USB cable from your phone and then press the power button for 10-15 seconds. Then connect your phone back again and try to flash.
"edb its just waiting for the device on any command" --- Actually this is not an error. Your phone is hard bricked. While in hard bricked mode adb won't work. ADB works only in fastboot mode.
Click to expand...
Click to collapse
I was lose hope because 12 hour my mido error cant read hello packet, and now fix it with your tips.. thanks a lot man
Prabudeva005 said:
I faced the similar situation. I pasted the ID in the russian and english forum. I got no message for weeks, I thought of flashing again, Voila. Device flashed and turned ON. Your device is hard bricked as mine, it needs authentication from Mi to flash via EDL mode. All you need to do is download the MI flash tool portable, and paste your Mi ID in forums.
Unfortunately both the forum's date to paste the ID has been expired. But still you try to get help from someone else from the forum or the moderators.
I'll explain different errors I faced and the solution for it.
"not reading the com port" --- You get this error when you flash Global version of the ROM. Use the Developer version of it.
"It starts flashing "read hello packet"" --- You get this error because edl is turned off in your phone. To turn it back ON, just remove the USB cable from your phone and then press the power button for 10-15 seconds. Then connect your phone back again and try to flash.
"edb its just waiting for the device on any command" --- Actually this is not an error. Your phone is hard bricked. While in hard bricked mode adb won't work. ADB works only in fastboot mode.
Click to expand...
Click to collapse
Thank you. I was in the "read hello packet" part and i was able to flash the Chinese rm
Thanks
Can u please give me your mi authorized I'd it will help for me
Am also stuck on edl mode redmi note 5 pro so please give me your mi I'd
Raviganthy said:
Am also stuck on edl mode redmi note 5 pro so please give me your mi I'd
Click to expand...
Click to collapse
https://forum.xda-developers.com/redmi-note-5-pro/how-to/fix-arb-bricked-device-qfil-t3841780
Help!
Help! i am also stuck on this problem on my Redmi 3. Can someone please help me?:crying:
---------- Post added at 06:18 AM ---------- Previous post was at 06:15 AM ----------
FKuzel said:
Yeah, posted my ID on the forum, got authorized, then used the "portable" miflash and it worked.. But on the other PC still got errors in miflash.. didn't even check for the authorization, so I suppose its PC related.. perhaps something with the drivers..
Click to expand...
Click to collapse
What forum?
can not read from port com xy
guilherme06 said:
Thank you. I was in the "read hello packet" part and i was able to flash the Chinese rm
Thanks
Click to expand...
Click to collapse
Hello, I've tried even developer rom, it displays the same error can not read from port com xy.
Even after doing test-point all over again.
By mistake I flashed wayne rom once, and phone boots but in a messed up fastboot mode.
talhosvi said:
Hello, I've tried even developer rom, it displays the same error can not read from port com xy.
Even after doing test-point all over again.
By mistake I flashed wayne rom once, and phone boots but in a messed up fastboot mode.
Click to expand...
Click to collapse
I have the same problem with my jasmine(which used to be wayne) when I tried to change it back into wayne again... do you have any solution already ?
kunoir said:
I have the same problem with my jasmine(which used to be wayne) when I tried to change it back into wayne again... do you have any solution already ?
Click to expand...
Click to collapse
have you find any solution?
jayspiker said:
have you find any solution?
Click to expand...
Click to collapse
i had the same problem but fixed with edl cable
Prabudeva005 said:
I faced the similar situation. I pasted the ID in the russian and english forum. I got no message for weeks, I thought of flashing again, Voila. Device flashed and turned ON. Your device is hard bricked as mine, it needs authentication from Mi to flash via EDL mode. All you need to do is download the MI flash tool portable, and paste your Mi ID in forums.
Unfortunately both the forum's date to paste the ID has been expired. But still you try to get help from someone else from the forum or the moderators.
I'll explain different errors I faced and the solution for it.
"not reading the com port" --- You get this error when you flash Global version of the ROM. Use the Developer version of it.
"It starts flashing "read hello packet"" --- You get this error because edl is turned off in your phone. To turn it back ON, just remove the USB cable from your phone and then press the power button for 10-15 seconds. Then connect your phone back again and try to flash.
"edb its just waiting for the device on any command" --- Actually this is not an error. Your phone is hard bricked. While in hard bricked mode adb won't work. ADB works only in fastboot mode.
Click to expand...
Click to collapse
where can i find this chinese rom for MI A3
talhosvi said:
can not read from port com xy
Hello, I've tried even developer rom, it displays the same error can not read from port com xy.
Even after doing test-point all over again.
By mistake I flashed wayne rom once, and phone boots but in a messed up fastboot mode.
Click to expand...
Click to collapse
same problem with me . Have you solved it ?? let me know please
Hi Guys,
I have the same problem trying to flash MIUI 11 in mi A3 with MIUI 12. Anyone knows a solution for this?
My phone is redmi note 5 pro. I flashed miuibeta 8.4 from beta 8.8 with twrp . I cleared system before reboot but not data. As i reboot,now my phone is stuck in edl mode. Wont got to fastboot,no logo,no vibrate,no led. Only miflash detect it. Butas flash got a failed to receive hello packet error. Can anyone help me out asap
If you werent that lazy and first tried reading forum or using search you would know, that to solve this problem you need to do is hold power button on phone for like 10s. Also, if you werent lazy and did research first, you would know that you have ARB brick, and in order to fix that you need authorized account.
Thank for the reply but i wouldn't have posted this if any of these methods works
Tens of people got hello packet error and every single one of them solved it by pressing and holding power button when required. Might also check if all your drivers are correct
Can it be flash from another authorized account other then the one on phone
Mikebsimte said:
Can it be flash from another authorized account other then the one on phone
Click to expand...
Click to collapse
Yes, as long as its authorized account. Authorized account can be used once for unbricking. If someone unbricked, and you use same account to unbrick another device, it wont work
Hello! Yesterday I flashed the Xiaomi rom to my Redmi 6 pro mi flash tool and now the phone only shows black screen, and when i connect to PC the notification light blinking and the PC recognize only in Qualcomm 9008 mode. What can I do in this situation?
can someone authorized my account for edl authentication
Use qualcomm msm download tool
What exactly you did please tell
Try using QFIL (installed with QPST). I hypothesize that the old flash programmer binary (prog_emmc_firehose_8953_ddr.mbn) does not require authentication like the new one. Open rawprogram0.xml with QFIL and follow the instructions to flash your device.
Note, I did not try this myself, try at your own risk.
I've tried qfil. It will not work. You'll get an error as well. I've ended with flashing while someone else logged to his account via TeamViewer on my pc. It costed me 12$ but he was an honest man and he wanted the payment after job done.
coolek33 said:
I've tried qfil. It will not work. You'll get an error as well. I've ended with flashing while someone else logged to his account via TeamViewer on my pc. It costed me 12$ but he was an honest man and he wanted the payment after job done.
Click to expand...
Click to collapse
Which fastboot rom version did you take the firehose programmer from?
I've flashed China developer roms. Don't remember which one exactly but it was still on Android 8.1. After this I've flashed xiaomi.eu on Android 9 and video recording wasn't working. So I have to flash in fastboot latest China dev to fix it.
coolek33 said:
I've tried qfil. It will not work. You'll get an error as well. I've ended with flashing while someone else logged to his account via TeamViewer on my pc. It costed me 12$ but he was an honest man and he wanted the payment after job done.
Click to expand...
Click to collapse
Hi, Unfortunately I'm also facing the same problem. I have tried everything from Fastboot to EDL mode nothing works.
As my bootloader mistakenly got locked & Now I'm stuck with blank screen, I have access to EDL Mode on my redmi 6 pro but while I try to flash a stock rom it ask for mi auth account. Sadly I don't have
I try to contact the Mi service to provide me the special permission to flash stock ROM on my redmi 6 pro but they say that "No such permission can be granted now"
It would be helpful if you provide me the contact details of the person you used to unbrick your phone via teamviewer.
You have to search one for yourself. Unfortunately the guy that helped me is not responding anymore. I've found someone else but he was to expensive and I don't remember who it was. There's a bunch of guys out there that can help you. Just be careful cause not all of them are fair.
coolek33 said:
You have to search one for yourself. Unfortunately the guy that helped me is not responding anymore. I've found someone else but he was to expensive and I don't remember who it was. There's a bunch of guys out there that can help you. Just be careful cause not all of them are fair.
Click to expand...
Click to collapse
Ok, Thanks for the quick response.
Hello,
My phone got hard bricked yesterday after the MIUI 11 update. It was running fine before on lastest MIUI10 global ROM with persistent TWRP, root and magisk. Bootloader is unlocked.
The phone dont turn on anymore and just show a white notification led when plugged to a PC. No recovery or fastboot access
If i press volume up when i plug it to my pc, it show up as "Mediatek USB Port" and disappear after 5 seconds.
I tried to open the phone/ removing battery, shorting EDL test points, but nothing happens.
My only solution appears to be using Sp_flash_tool but seems like i need an authorized Mi account flash the stock ROM.
Do someone know where i can get acces to one of those account ?
Thanks for your replies guys !
Redmi Note 8 Pro Hard Bricked
I'm in the same situation.
please help me
Hello,
The same thing happened to me when I installed the Orange FOX recovery, it didn't go into Fastboot mode, so I had to press the 3 buttons and wait for it to turn off completely, open the ADB control console and then connect it to the PC via USB by pressing the volume + button.
The latter I did on several occasions (Turn it off completely and connect by USB). Until I recognized it, when I recognized them, I had to flash the SYSTEM, CUST, RECOVERY. One by one, in total it took almost 5 minutes.
After that the phone started normal, obviously without root, nor custom recovery.
I'm also in the same situation as all of you, the PC doesn't recognize me and I can't go into fastboot
Hey,
I tried everything I could (battery connected/unplugged), my phone seems to have a corrupted preloader and only start the boot rom. That's why it shows up as "Mediatek USB PORT", if the preloader was'nt corrupted, it should be named "MediaTek PreLoader USB VCOM port" or something similar.
The only way to recover it imo is to flash a healthy preloader using SPFlashTool low level flash mode and next flash a full rom when "MediaTek PreLoader USB VCOM port" appears in the device manager.
Unfortunately, xiaomi ask for a certified account for low level flashing. I found one but the guy ask for 40$ for just logging it into my pc with teamviewer.
I buyed a Samsung Note10+ in replacement and i'll just wait someone find a solution to sell my 10-day-used redmi if I can revive it one day.
I got hundreds $ of Xiaomi home automation products in my home, but that was my first phone from this brand. I think it will also be the last.
I'm sad to see that their security policy on the phones is so frustrating to the people who just want to have a full acces on their devices.
Authorise can be done with professional tools
Tools like umt, hydra tool, miracle xiaomi tool, does the authorization. And i think mtk cpu Auth will only be available in miracle xiaomi tool, be aware every Auth cost credit of 4 to 10 u will have but credit separate from the tool.. Hope this will help
MOD EDIT: quote removed help our devlopers lmao to get atleast one rom ??
They only need to unbrick sometimes.
girishjangir7 said:
MOD EDIT: name removed help our devlopers lmao to get atleast one rom ??
They only need to unbrick sometimes.
Click to expand...
Click to collapse
Where is this post??
Some hours ago an user MOD EDIT: name removed offers help to unbrick devices but all threads was deleted??? Why?
djzero86 said:
Where is this post??
Some hours ago an user MOD EDIT: name removed offers help to unbrick devices but all threads was deleted??? Why?
Click to expand...
Click to collapse
It's against forum rules to post paid services
Y0annC said:
Hello,
My phone got hard bricked yesterday after the MIUI 11 update. It was running fine before on lastest MIUI10 global ROM with persistent TWRP, root and magisk. Bootloader is unlocked.
The phone dont turn on anymore and just show a white notification led when plugged to a PC. No recovery or fastboot access
If i press volume up when i plug it to my pc, it show up as "Mediatek USB Port" and disappear after 5 seconds.
I tried to open the phone/ removing battery, shorting EDL test points, but nothing happens.
My only solution appears to be using Sp_flash_tool but seems like i need an authorized Mi account flash the stock ROM.
Do someone know where i can get acces to one of those account ?
Thanks for your replies guys !
Click to expand...
Click to collapse
I Faced The Same Problem Of Bricked Phone Of Redmi Note 8 Pro, I Was Unable To Enter Fastboot Mode, Recovery Mode & Even Can't Enter Into The System Because I Flash Wrong Boot.img File, Thereafter I Tried To Use SP Flash Tool But Failed Due To Xiaomi Authorised Account Issue. Then I Emailed Xiaomi For Getting My Account Authorised And They Emailed Back And Told Me That They Can't Authorise My Account..
Then I Decided To Visit Mi Service Centre As My Phone Was In Warranty, The Funniest Fact Is The Technicians Existed There Were Failed To Detect The Problem. I Told Them That My Phone Was Automatically Got Dead After Installing An Update Just For Making Them Unaware From The Real Fact.
I Told Them That There Is No Hardware Issue Only Need To Flash Original Firmware But They Are Freak And Didn't Listen To Me And Opened Up Every Part Of The Phone, Now They Told Me That The Phone Will Need 7 Days Of Repairing Take The Phone After 7 Days.
I Tried To Teach Them The Way By Which The Phone Could Be Repaired But They Only Listen To Me And Did Nothing, They Were Behaving Like A Beginner In Repairing Phone,
They Didn't Know That The Phone Can Also Be Reapired During Switched Off.
Now I Have To Wait For 7 Days, So Guys Flash Anything Carefully Otherwise You Will Face The Same Situation.
Thanks
Well I guess I won't unlock my device... To be honest I have no reason to do so. The phone is running great and I have adguard and removed all the apps I don't like using adb.
petenoni said:
Well I guess I won't unlock my device... To be honest I have no reason to do so. The phone is running great and I have adguard and removed all the apps I don't like using adb.
Click to expand...
Click to collapse
I Also Had Adguard But I Was Still Not Satisfied
I Wanted My Phone To Be Rooted And Use The Custom ROMs If Build In Future.
Hemant Singh Rajput said:
I Faced The Same Problem Of Bricked Phone Of Redmi Note 8 Pro, I Was Unable To Enter Fastboot Mode, Recovery Mode & Even Can't Enter Into The System Because I Flash Wrong Boot.img File, Thereafter I Tried To Use SP Flash Tool But Failed Due To Xiaomi Authorised Account Issue. Then I Emailed Xiaomi For Getting My Account Authorised And They Emailed Back And Told Me That They Can't Authorise My Account..
Then I Decided To Visit Mi Service Centre As My Phone Was In Warranty, The Funniest Fact Is The Technicians Existed There Were Failed To Detect The Problem. I Told Them That My Phone Was Automatically Got Dead After Installing An Update Just For Making Them Unaware From The Real Fact.
I Told Them That There Is No Hardware Issue Only Need To Flash Original Firmware But They Are Freak And Didn't Listen To Me And Opened Up Every Part Of The Phone, Now They Told Me That The Phone Will Need 7 Days Of Repairing Take The Phone After 7 Days.
I Tried To Teach Them The Way By Which The Phone Could Be Repaired But They Only Listen To Me And Did Nothing, They Were Behaving Like A Beginner In Repairing Phone,
They Didn't Know That The Phone Can Also Be Reapired During Switched Off.
Now I Have To Wait For 7 Days, So Guys Flash Anything Carefully Otherwise You Will Face The Same Situation.
Thanks
Click to expand...
Click to collapse
mine only take 3 hours at the service center in Jaipur
Y0annC said:
Hello,
My phone got hard bricked yesterday after the MIUI 11 update. It was running fine before on lastest MIUI10 global ROM with persistent TWRP, root and magisk. Bootloader is unlocked.
The phone dont turn on anymore and just show a white notification led when plugged to a PC. No recovery or fastboot access
If i press volume up when i plug it to my pc, it show up as "Mediatek USB Port" and disappear after 5 seconds.
I tried to open the phone/ removing battery, shorting EDL test points, but nothing happens.
My only solution appears to be using Sp_flash_tool but seems like i need an authorized Mi account flash the stock ROM.
Do someone know where i can get acces to one of those account ?
Thanks for your replies guys !
Click to expand...
Click to collapse
hi
does anyone find a solution for this?
please help
Well there is now a way to bypass the need for an authorized account, if you device is unbricked. Basically if you flash this before you brick your phone, it allows you to use sp flash to unbrick it without authorized account.
Read this thread:
https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527
JuanM2020 said:
Well there is now a way to bypass the need for an authorized account, if you device is unbricked. Basically if you flash this before you brick your phone, it allows you to use sp flash to unbrick it without authorized account.
Read this thread:
https://forum.xda-developers.com/redmi-note-8-pro/how-to/guide-redmi-note-8-pro-megathread-t4056527
Click to expand...
Click to collapse
doesn't work
samadsaba said:
doesn't work
Click to expand...
Click to collapse
This is only for unbricked devices.... As I stated. If your device was already bricked it won't help you.
I also faced this problem... I used paid service to unbrick it... I must pay 35USD for the service.. but just wait.. If it works I will post here again. I bricked my phone when flashed anti brick on Android 10.. I forgot downgrade it to Android 9