Develop Bugs

[ROM][5.1.1] CM12.1 Official Nightlies for Find 7A/S

Hello all
Official CM 12.1 nightlies based on Android Lollipop 5.1.1 for Find 7A/S have been officially released effective 22nd April 2015. Its time to thank the entire CyanogenMod Team and @[U]jajb[/U] for their efforts in the development and encourage them to keep supporting us the same way in the future.
Let the flashing go on!!!!:highfive:
Nightly Downloads
CM12.1 Find 7A
http://download.cyanogenmod.org/?device=find7
CM12.1 Find 7S (QHD)
http://download.cyanogenmod.org/?device=find7s
5.1 Minimal Gapps (for a light and blazzing fast experience):highfive:
https://www.androidfilehost.com/?fid=95916177934550851
Installation Instructions
Coming from 5.0 or less ROMS
Download cm-12.1-xxxxxxxx-NIGHTLY-find7x.zip to your sdcard
Boot into Recovery
Wipe data, cache & dalvik cache
Flash cm-12.1-xxxxxxxx-NIGHTLY-find7x.zip from sdcard
Flash 5.1 Minimal GApps.zip from sdcard
Reboot:highfive:
Coming from previous CM 12.1 build
Wipe cache & dalvik cache
Flash cm-12.1-xxxxxxxx-NIGHTLY-find7x.zip from sdcard
Reboot:highfive:

Somebody successfully flashed it ? It works ?

raber111 said:
Somebody successfully flashed it ? It works ?
Click to expand...
Click to collapse
It doesn't work. http://forum.xda-developers.com/showpost.php?p=58255547&postcount=397
I tried to flash the last CM11 build and I'm still stucked there.

Anyone tried 20150119 build yet? is it working??

CyanPile said:
Anyone tried 20150119 build yet? is it working??
Click to expand...
Click to collapse
It seems so, but wifi is terribly slow.

It's going to be announced soon in CM's blog, but find7a and find7s are split now and get separate builds. You need to flash "find7" on find7a devices and "find7s" on find7s qhd devices. You should update the recovery too, but I think there are no recovery images available yet. I might provide some if nobody else does it.

I successfully flashed cm 12 1901 build . WiFi works normally. Fonts and icons too small

on 2.0.4
Can we flash this on color os 2.0.4 version without any issues or have to downgrade to 1.2.7

sheraz1015 said:
Can we flash this on color os 2.0.4 version without any issues or have to downgrade to 1.2.7
Click to expand...
Click to collapse
You will have to flash it over 1.2.x Color OS. I flashed 19 build over 1.2.7.
Installed without an issue.
For QHD use Find 7s version.

mikeioannina said:
It's going to be announced soon in CM's blog, but find7a and find7s are split now and get separate builds. You need to flash "find7" on find7a devices and "find7s" on find7s qhd devices. You should update the recovery too, but I think there are no recovery images available yet. I might provide some if nobody else does it.
Click to expand...
Click to collapse
Thank for your
help and shall flash it.
Its there any way to backup imei of oppo find 7
ganeshbiyer said:
You will have to flash it over 1.2.x Color OS. I flashed 19 build over 1.2.7.
Installed without an issue.
For QHD use Find 7s version.
Click to expand...
Click to collapse
Sent from my LG-D802 using XDA Premium 4 mobile app

You can always use tantrums recovery flasher...they recently updated to v10.....has all the latest recoveries

Anyone having problems when using unified partition layout? After I flashed the ROM the phone just tells me that there's an encryption error and I have to wipe data. I wiped data and still the same error. When I went back to previous ROM I'm using everything else is fine, except with the proximity sensor bug. Cheers

darthbadar said:
Anyone having problems when using unified partition layout? After I flashed the ROM the phone just tells me that there's an encryption error and I have to wipe data. I wiped data and still the same error. When I went back to previous ROM I'm using everything else is fine, except with the proximity sensor bug. Cheers
Click to expand...
Click to collapse
De-unify first, then flash. You need to have to revert back to 1.2.x.
Flash Open TWRP and then flash CM12 Nightlies. COs 1.2.x and CM12 do not support Unification.

ganeshbiyer said:
De-unify first, then flash. You need to have to revert back to 1.2.x.
Flash Open TWRP and then flash CM12 Nightlies. COs 1.2.x and CM12 do not support Unification.
Click to expand...
Click to collapse
Soo, there's no way I'm using CM12 Nightlies with unified storage? Thanks for answering man. :highfive:

Changelog ?
changelog here http://www.cmxlog.com/12/find7/
and here http://www.cmxlog.com/12/find7s/

Chrome
Is the only way to switch between tabs the recent apps thingy? I mean I don't habe a problem but still kinda awkward not knowing where the tab went. BTW I got twrp 2.8.4 and there's always this horizontal line where the display shifts. It's like these lines on old videos that walk through the picture. Trying my best on English (I'm German )

alex1.salge said:
Is the only way to switch between tabs the recent apps thingy? I mean I don't habe a problem but still kinda awkward not knowing where the tab went. BTW I got twrp 2.8.4 and there's always this horizontal line where the display shifts. It's like these lines on old videos that walk through the picture. Trying my best on English (I'm German )
Click to expand...
Click to collapse
Regarding the line in recovery, use Nameless TWRP recovery from HERE.
I have not tried the latest TWRP Open Recovery 2.8.4 for Find7, but with Nameless TWRP Recovery, I am able to use OTG in recovery. This allows me to take backups into 32gb usb drive and restore from there.

Custom Ringtones
Hello Just flashed to build 2015/01/21 and I noticed that I was unable to change my ringtone. This may seem like a trivial thing but I would just like to know if it's my device specific. Find 7a running CM12 stock kernels and all.
Edit: Turned off NuPlayer in developers options and set SELinux Kernel to Permissive.

Enyioha said:
Hello Just flashed to build 2015/01/21 and I noticed that I was unable to change my ringtone. This may seem like a trivial thing but I would just like to know if it's my device specific. Find 7a running CM12 stock kernels and all.
Edit: Turned off NuPlayer in developers options and set SELinux Kernel to Permissive.
Click to expand...
Click to collapse
sorry for noob question
how can I change SELinux Kernel to Permissive ?

Missing languages
In the 21/01 build, some languages are missing - texts simply do not appear and the language list is empty near the end.
EDIT:
23/01 build solves it.
EDIT2:
Gyro doesn't work, screen doesn't rotate.

CM 12.1/13 for Oppo Find 7 X9076 / new Display-Panel

I just got a Find 7(s) X9076 and wanted to install CyanogenMod.
If I take one of the official download page (which are all CM 13) the screen shows everything in wrong colors.
I think (so far I read this from the other threads) it's because of a new displaypanel.
Is there any CM that is working for this display?
What is the problem with this panel, when can I install from official CM-Page?
Best regards
gragib

gragib said:
I just got a Find 7(s) X9076 and wanted to install CyanogenMod.
If I take one of the official download page (which are all CM 13) the screen shows everything in wrong colors.
I think (so far I read this from the other threads) it's because of a new displaypanel.
Is there any CM that is working for this display?
What is the problem with this panel, when can I install from official CM-Page?
Best regards
gragib
Click to expand...
Click to collapse
Hi there! I think your best bet is to go and try omnirom either 5.1.1 or 6.0.1 whichever suits your taste.
Currently im running omnirom 6.0.1 on the new panel similar as you and it is absolutely great! I suggest that you should go and try it out.
Cheers!

DingleBell said:
Hi there! I think your best bet is to go and try omnirom either 5.1.1 or 6.0.1 whichever suits your taste.
Currently im running omnirom 6.0.1 on the new panel similar as you and it is absolutely great! I suggest that you should go and try it out.
Cheers!
Click to expand...
Click to collapse
Suscribe, i run omni 6.0.1 and it works like a charm, everything runs fine and fast, great work from Maxwen, thanks man.

roi_xordo said:
Suscribe, i run omni 6.0.1 and it works like a charm, everything runs fine and fast, great work from Maxwen, thanks man.
Click to expand...
Click to collapse
Yeah.. As of right now, Maxwen omnirom 6.0.1 is the best rom for the newer type of lcd panel. Im using it as a daily driver and had not encountered any problems.
Big shoutout and cheers to Maxwen for the rom. :good:

Many THX for all replies!
I have now the omnirom 5.1.1 installed and its running very well.

New LCD + OmniRom = BSoD > Random Reboots // + Spectrum = Random Reboots
Hi guys
I really feel bad when i read your comments, and notice that you all succeed to get OmniRom runing smoothly.
I'm facing random reboots while using Omnirom (Spectrum also) with X9076 new LCD panel, and it get worst when it's charging.
Do anyone know how to solve this problem.
I already tried clean install by flashing last Spectrum (to get latest Modem & Firmware) then wiped all and flashed Omnirom 5.1.1/6.0.1, but it doesn't work
Also i saw somewhere that it will be good to reflash everything step by step so i flashed starting by ColorOS 1.2.9 then 2.0.8 then 2.1.5 then OmniROM but random reboots still occur.
Please guys help me, i cannot stand that anymore.

Hi, which recovery do you use? I flash omni (both versions) with TWRP (full wipes dalvik, cache, etc) and no issues, everything works fine, no bsod's, no reboots...
Cheers

roi_xordo said:
Hi, which recovery do you use? I flash omni (both versions) with TWRP (full wipes dalvik, cache, etc) and no issues, everything works fine, no bsod's, no reboots...
Cheers
Click to expand...
Click to collapse
I'm using TWRP 2.8.7.2 to flash OmniRom, I wipe all (Cache, Dalvik, Internal, System, Data) i only keep raw partitions (to not lose LVM)

otmanes1 said:
I'm using TWRP 2.8.7.2 to flash OmniRom, I wipe all (Cache, Dalvik, Internal, System, Data) i only keep raw partitions (to not lose LVM)
Click to expand...
Click to collapse
I dont understand it mate, we have the same phone (x9076 + r63419 Panel) and the same recovery (2.8.7.2), but in my case this roms works great (5.1.1 and 6.0.1, both roms works fine)
Did you try to format data? Backup what you need and in the wipe menu, instead of wipe, try to format data, then flash the rom, the gapps, and wipe dalvik cache only before reboot. I dont know if this will work to you, but is the only thing I can think of...
I tried Spectrum rom too, and except for the known issues (camera, gps icon, etc..), everything else works right, no bsods, no reboots...
Good luck

gragib said:
I just got a Find 7(s) X9076 and wanted to install CyanogenMod.
If I take one of the official download page (which are all CM 13) the screen shows everything in wrong colors.
I think (so far I read this from the other threads) it's because of a new displaypanel.
Is there any CM that is working for this display?
What is the problem with this panel, when can I install from official CM-Page?
Best regards
gragib
Click to expand...
Click to collapse
this will work on new screen display
http://pan.baidu.com/s/1gevNd1D#path=%2FOPPO%20Find%207%2FCM12.1-Find7

QTeknology said:
this will work on new screen display
http://pan.baidu.com/s/1gevNd1D#path=%2FOPPO%20Find%207%2FCM12.1-Find7
Click to expand...
Click to collapse
Hi. Can you confirm that version works in panel R63419? I tried soooo many nightlies from cyanogen and so many other roms with cyanogen based and no one works...

roi_xordo said:
Hi. Can you confirm that version works in panel R63419? I tried soooo many nightlies from cyanogen and so many other roms with cyanogen based and no one works...
Click to expand...
Click to collapse
Tried It ?
Inviato dal mio Find7 utilizzando Tapatalk

QTeknology said:
Tried It ?
Inviato dal mio Find7 utilizzando Tapatalk
Click to expand...
Click to collapse
No i dont, i dont like to waste my time... i am sure that no one ROM based in cyanogen will work whit our panel. Try Omnirom, is the best ROM for the find 7

roi_xordo said:
No i dont, i dont like to waste my time... i am sure that no one ROM based in cyanogen will work whit our panel. Try Omnirom, is the best ROM for the find 7
Click to expand...
Click to collapse
that link is from wuxianlin, the best developer for find7 and oneplus.
It's a special version of cm12.1 released unofficially later the end of cm12.1 for find7 and it's for new panel.
I don't waste my time too, I have older panel so I don't have reason to flash It.

Newbie owner/questions

Hey,
Recently broke my phone and bought a Find 7 as a replacement. Hate the OS so started searching for ROMS etc. Never flashed anything or rooted anything so everything I've done so far - I've just learned.
I basically want to get as close to android 6.0 marshmallow stock as possible. Which ROM is the best for this?
So basically, I've tried to flash CM13 (latest release) which I got directly from their website, all goes well however when the phone boots the screen is blank. Volume rockers work, capacitive buttons work and haptic feed back there but screen is blank. Not sure what the problem is.
ANY help at all is appreciated.
I have the Find 7 QHD version which I think is the 7S? (X9076)
Thanks all!

1) You have to flash CWM or Twrp recovery to your phone. I recommend TWRP 3.0.2. Download it for your OPPO Find 7.
Flash it. Can be done via ADB.
2) You need micro SD card formatted by the phone! Not necessary but recommended.
2) Then download needed ROM( I like crDroid : http://forum.xda-developers.com/showthread.php?t=3171600
but it's developer left it. So no further support planned) to SD card(on PC of course).
3) Put the card into the phone.
4) On the phone: go to recovery mode. Wipe data, system, cache.
5) Install ROM from the micro SD card.
That is all. Enjoy it.
Sent from my X9077 using Tapatalk

You can also check out resurrection remix rom. Find the official thread in xda for find 7. As for your screen being blank it maybe because you have a new lcd panel which the official cm rom does not support. Try flashing omni rom instead. Last nightly is from aug 30. It is very stable and very close to stock android.
Sent from my Find7 using Tapatalk

bailfire said:
Hey,
Recently broke my phone and bought a Find 7 as a replacement. Hate the OS so started searching for ROMS etc. Never flashed anything or rooted anything so everything I've done so far - I've just learned.
I basically want to get as close to android 6.0 marshmallow stock as possible. Which ROM is the best for this?
So basically, I've tried to flash CM13 (latest release) which I got directly from their website, all goes well however when the phone boots the screen is blank. Volume rockers work, capacitive buttons work and haptic feed back there but screen is blank. Not sure what the problem is.
ANY help at all is appreciated.
I have the Find 7 QHD version which I think is the 7S? (X9076)
Thanks all!
Click to expand...
Click to collapse
Also check this post http://forum.xda-developers.com/showthread.php?p=68662397
Looks like you can use rr rom wuth patch.
Sent from my Find7 using Tapatalk

Andrew111 said:
1) You have to flash CWM or Twrp recovery to your phone. I recommend TWRP 3.0.2. Download it for your OPPO Find 7.
Flash it. Can be done via ADB.
2) You need micro SD card formatted by the phone! Not necessary but recommended.
2) Then download needed ROM( I like crDroid : http://forum.xda-developers.com/showthread.php?t=3171600
but it's developer left it. So no further support planned) to SD card(on PC of course).
3) Put the card into the phone.
4) On the phone: go to recovery mode. Wipe data, system, cache.
5) Install ROM from the micro SD card.
That is all. Enjoy it.
Sent from my X9077 using Tapatalk
Click to expand...
Click to collapse
DroidSK said:
You can also check out resurrection remix rom. Find the official thread in xda for find 7. As for your screen being blank it maybe because you have a new lcd panel which the official cm rom does not support. Try flashing omni rom instead. Last nightly is from aug 30. It is very stable and very close to stock android.
Sent from my Find7 using Tapatalk
Click to expand...
Click to collapse
Hey guys,
Many thanks for those tips (especially for the LCD patch - I'll have to try that).
So CM seems to be the best for Find7 at the moment but doesn't support unified storage? Does this mean I'll have this silly app storage limit? Anyway around it using CM?
As for the rest which is best (close to stock, stable, no bugs) -
RR
Omni
Nameless
Thanks

Omni is close to stock and very stable. RR and possibly nameless are both cm based.
Used omni for a couple of months and now using rr for the last couple of days. I would choose rr because of all the additional features.
Both are great daily drivers. Both support lvm so you can unify your storage in coloros and then flash either rom.
Sent from my Find7 using Tapatalk

DroidSK said:
Omni is close to stock and very stable. RR and possibly nameless are both cm based.
Used omni for a couple of months and now using rr for the last couple of days. I would choose rr because of all the additional features.
Both are great daily drivers. Both support lvm so you can unify your storage in coloros and then flash either rom.
Sent from my Find7 using Tapatalk
Click to expand...
Click to collapse
Hmmm,
CM thread has loads of additional things like installing some of the default apps like camera etc and how to get rid of all the bloatware.
I'll probably try nameless first since it seems to be the most popular next to CM. Its hard choosing one since theres so many! Out of Omni and RR which do you think is faster? What features does RR have that made you switch over to it?

If you truly want a stock like experience without too many features and full stability in your software then I would recommend Omni for you.
RR and DU have a lot of extra features relating to various visual effects that can be tweaked to your liking which can make your software look pretty, if you are interested in that sort of thing.
Cm is also stock like experience with some bugs here and there, nothing too big.
Nameless is based on cm with a few extra features but personally that Rom gives me bad battery life. (can be different for you)
Exodus, Mokee and Crdroid are just better alternatives to CM regarding features.
Edit: There are Roms that provide you with the option of LVM and there are those which only support stock partition. (Lvm is a way to enhance storage capacity).
Cm and a few other Cm based Roms that do not support lvm can be used with the chinese partition instead which also increases storage. But that is a bit lengthy process and for someone new like you I would recommend you to stay with a Rom like Omni which does support LVM.
Hope all this helped somehow

[ROM][UNOFFICIAL][Flounder][8.1.0_r22] NitrogenOS[04/30/18]

Nitrogen OS is a custom ROM based on AOSP and I made it for our Nexus 9 (WIFI) today .
Thanks to the NitrogenOS project for the source
First boot takes time, just wait patiently
Features:
0. Stock kernel works and force encrypt disabled
1. Non-rooted, use magisk 16.4 for root.
P.S. Flash magisk after first boot and install magisk manager manually.
2.HW still broken
Here's a thread describe Nitrogen OS in details,I'll save the time
https://forum.xda-developers.com/go...-nitrogen-os-n-substratum-04-09-2016-t3454762
Download link : https://www.androidfilehost.com/?w=files&flid=234787
Device tree:https://github.com/LineageOS/android_device_htc_flounder modified for Nitrogen.

Awesome job

Down loading now.

Another N9 ROM. This is great. Poor Flounder has been the red headed step child for so long now. Thanks for another quality choice for our device.

Thanks very much. I love Nitrogen rom on my Shamu. I'll DL as soon as get home.

Woohoo!! I am glad, I just bought a Nexus 9 a couple of days ago and was severely disapointed with the lack of ROMs and the fact that the one that I got was a refurbished but still having the sensor issue. Happy with my Nexus 7 2013 and how fast it is with the Nitrogen OS.
---------- Post added at 02:52 AM ---------- Previous post was at 02:08 AM ----------
Woohoo!! I am glad, I just bought a Nexus 9 a couple of days ago and was severely disapointed with the lack of ROMs and the fact that the one that I got was a refurbished but still having the sensor issue. Happy with my Nexus 7 2013 and how fast it is with the Nitrogen OS.

jlokos said:
Thanks very much. I love Nitrogen rom on my Shamu. I'll DL as soon as get home.
Click to expand...
Click to collapse
Flashed this morning, and everything is working well. Thanks very much for the Nitrogen flounder.

What! Nitro for flounder too! Seems as tho all the good roms for our device came after all! Will definitely be flashing thjs afternoon. Thanks op!

Thanks for your work. Just flash rom & the lastest supersu but can't get root.
Please help

RogueSven said:
Thanks for your work. Just flash rom & the lastest supersu but can't get root.
Please help
Click to expand...
Click to collapse
The latest build is pre-rooted and SuperSU is unnecessary

Does this ROM have force encrypt disabled like other Nitrogen OS builds?

I can't get videos to play. I used opengapps stock.

ins5736 said:
I can't get videos to play. I used opengapps stock.
Click to expand...
Click to collapse
The same here. YouTube, Apple music , Amazon music, Spotify all failed to play here. Although some game can play simple audio.
Is it possible that it is missing some codec libs ?

cheeven_tsai said:
The same here. YouTube, Apple music , Amazon music, Spotify all failed to play here. Although some game can play simple audio.
Is it possible that it is missing some codec libs ?
Click to expand...
Click to collapse
Now youtube works with 0304 build. uploading

Tried to flash latest build but got stuck in a Google loop . Clean install and latest vendor. Could have been a bad download so will try again.

Gold Ribbed said:
Tried to flash latest build but got stuck in a Google loop . Clean install and latest vendor. Could have been a bad download so will try again.
Click to expand...
Click to collapse
Tried again with fresh download and all is fine thanks for another ROM to try.

I'm stuck in boot logo boot loop. I flashed rom and dynamic minimal gapps and reboot. no dice. this is also happening other ROMs I flash. 2 days ago I updated factory image from @WugFresh toolkit. again can't flash no ROMs boot logo loop every rom. can someone please point me in right direction. thx in advance
Sent From my Yes my Pixel XL

freddienuxx said:
I'm stuck in boot logo boot loop. I flashed rom and dynamic minimal gapps and reboot. no dice. this is also happening other ROMs I flash. 2 days ago I updated factory image from @WugFresh toolkit. again can't flash no ROMs boot logo loop every rom. can someone please point me in right direction. thx in advance
Sent From my Yes my Pixel XL
Click to expand...
Click to collapse
Did you try flashing custom kernel like Fire-Ice?

maelfilk said:
Did you try flashing custom kernel like Fire-Ice?
Click to expand...
Click to collapse
nope why that works?
Sent From my Yes my Pixel XL

What vendor image are we supposed to use? I flashed N4F26Q but when i boot it asks me to use the F image.

Best CUSTOM ROM in the history of XDA?

Well hello there my name is San, I've been using P2 from many years I have rooted the device on the next day I bought it. I've used countless number of custom ROMS upto now. As per my experience there no ROM is 100% perfect every Rom has its own bug or problem. I just want to ask the developers or users to suggest me a BEST ROM MADE FOR LENOVO P2 so far upto now (andriod 7 to 10) which doesn't have any bugs or problems and everything is working.

Abhignu said:
Well hello there my name is San, I've been using P2 from many years I have rooted the device on the next day I bought it. I've used countless number of custom ROMS upto now. As per my experience there no ROM is 100% perfect every Rom has its own bug or problem. I just want to ask the developers or users to suggest me a BEST ROM MADE FOR LENOVO P2 so far upto now (andriod 7 to 10) which doesn't have any bugs or problems and everything is working.
Click to expand...
Click to collapse
use stock rom

For me 7.1.2 Viperos3.1.1 (14-4-2018) is the best rom ever altime.
?

Murtie said:
For me 7.1.2 Viperos3.1.1 (14-4-2018) is the best rom ever altime.
Click to expand...
Click to collapse
How is the charging speed and performance of it?
And can you please share the link of the Rom thread?
Thank you

markmywordz said:
use stock rom
Click to expand...
Click to collapse
Which version of stock rom?
Currently I am using nougat version of stock rom I don't find it so impressive I don't know why but the charging speed of this ROM is not fast and battery efficiency also decreased as compared to another ROMs battery is draining very fast while using the mobile.

Abhignu said:
Which version of stock rom?
Currently I am using nougat version of stock rom I don't find it so impressive I don't know why but the charging speed of this ROM is not fast and battery efficiency also decreased as compared to another ROMs battery is draining very fast while using the mobile.
Click to expand...
Click to collapse
u can try syberia os

I have tried most ROMs more than once and always come back to Los 16. I am using the final build with April security patch and I can't fault it. Also link below is the best Google camera with dark video fix i have used.
https://forum.xda-developers.com/showpost.php?p=82335289&postcount=397

markmywordz said:
u can try syberia os
Click to expand...
Click to collapse
Yeah I heard about syberia os.
Is it good? Does it have any bugs?

Sutcliffe9 said:
I have tried most ROMs more than once and always come back to Los 16. I am using the final build with April security patch and I can't fault it. Also link below is the best Google camera with dark video fix i have used.
https://forum.xda-developers.com/showpost.php?p=82335289&postcount=397
Click to expand...
Click to collapse
Yes brother, lineage os 16 is the best I know that because it was my last rom since 1 year. But I've bored of it.
If you don't mind Please Can you suggest any other ROM apart from lineage os?

Abhignu said:
Yeah I heard about syberia os.
Is it good? Does it have any bugs?
Click to expand...
Click to collapse
Great ROM with no bugs
https://mega.nz/file/ZP5mHCpT#3l8QkJRhmQQZ00QSzezOjxvoR0UFRwBLBsvk513IFzw

Abhignu said:
How is the charging speed and performance of it?
And can you please share the link of the Rom thread?
Thank you
Click to expand...
Click to collapse
https://forum.xda-developers.com/lenovo-p2/development/rom-viperos-n-v3-1-1-p2-t3706408
This is the latest version april 2018
https://androidfilehost.com/?fid=962187416754475066

Murtie said:
https://forum.xda-developers.com/lenovo-p2/development/rom-viperos-n-v3-1-1-p2-t3706408
This is the latest version april 2018
https://androidfilehost.com/?fid=962187416754475066
Click to expand...
Click to collapse
There is a camcorder issue with this rom

Sutcliffe9 said:
Great ROM with no bugs
https://mega.nz/file/ZP5mHCpT#3l8QkJRhmQQZ00QSzezOjxvoR0UFRwBLBsvk513IFzw
Click to expand...
Click to collapse
hi and thanks for recommend this awesome rom. Can you provide the installation instructions? im from LOS 17.1 and it got audio bug. and how to do clean install to prevent any bugs? any addons that you recommend to install with this great rom such as kernel, gcam, soundmod, battery saver tips etc. thanks for your advice.

hangneko21 said:
hi and thanks for recommend this awesome rom. Can you provide the installation instructions? im from LOS 17.1 and it got audio bug. and how to do clean install to prevent any bugs? any addons that you recommend to install with this great rom such as kernel, gcam, soundmod, battery saver tips etc. thanks for your advice.
Click to expand...
Click to collapse
Just install Rom like you would any other. This is the best GCam I have used.
https://forum.xda-developers.com/showpost.php?p=82335289&postcount=397

how is Syberian 2.9 Android9 compared to Lineage16.?
İn battery ,performance ?

Murtie said:
how is Syberian 2.9 Android9 compared to Lineage16.?
İn battery ,performance ?
Click to expand...
Click to collapse
Can someone shed some light? Thinking to flash Syberian 2.9, Syberian 3.0 or Lineage 17.1. Battery performance and stability are my main priorities.

Syberia 2.9 is the best around for now.

Sutcliffe9 said:
Syberia 2.9 is the best around for now.
Click to expand...
Click to collapse
Agree, I am on Mokke 10, also great rom with nightlies ( btw - there is also Mokke Pie - suported nightly) but thinking of going back to Syberia 2.9.

amdyss said:
Agree, I am on Mokke 10, also great rom with nightlies ( btw - there is also Mokke Pie - suported nightly) but thinking of going back to Syberia 2.9.
Click to expand...
Click to collapse
Try Mokee 9 first it works flawlessly and is still being updated with latest security patches.

GuestK00460 said:
use stock rom
Click to expand...
Click to collapse
The nougat stock rom has broken battery information, so battery monitoring apps such as accubattery do not work.