Develop Bugs

[Kernel][7.1.1] SunKernel Pedigree Z5 for LineageOS [sumire]

A custom Kernel for LineageOS 7.1.1 based on the ideas and experiences of SunKernel corona (StockKernel) for Xperia Z5 series
XDA:DevDB Information
SunKernel Pedigree Z5 for LineageOS, Kernel for the Sony Xperia Z5
Contributors
zacharias.maladroit
Kernel Special Features: FauxSound, KCAL, reworked thermal engine, fast camera, etc.
Version Information
Status: Beta
Current Beta Version: 1.3
Beta Release Date: 2017-03-14
Created 2017-03-14
Last Updated 2017-08-30

Reserved
Changelogs:
14.1_I
initial release - Features:
Click to expand...
Click to collapse
14.1_I.2
changes ...
Click to expand...
Click to collapse
14.1_I.3
add throttling for orientation sensor input events (most likely NOT needed) to cut idle cpu high load of 15-20%
Click to expand...
Click to collapse
14.1_I.4
removed lots of sources for log-spam (dmesg/kernel-log)
BCL<-->KTM interface for BCL (battery_current_limit) driver is now used, faster, more reliable (less overlapping) and better hotplug during thermal events, etc.
more reliable bcl mitigation due to fresh SoC value, allowing frequency-based mitigation even with BCL set to off
MUCH improved sound output
more reliable sound playback
Click to expand...
Click to collapse

Reserved
Kernel Releases (Betas for now):
Link to custom LineageOS 14.1 build (patchlevel March 5th 2017)
not sure what differs between this and the other builds:
https://drive.google.com/open?id=0BykGGWB96CBQR1VIb3QtdGpsTmM
I initiated the fetch of the repo files via
lunch lineage_sumire-userdebug
and added the blobs repo,
then restarted the build ...
From now on
both LineageOS and Resurrection Remix are unified builds that work on Single SIM and Dual SIM devices - no separate kernel or ROM needed !
Resurrection Remix: already IS the unified build (thread is currently parked at the General Subforum: Resurrection Remix 5.8.2 for Xperia Z5 (unified build) )
LineageOS: please download the unified LineageOS builds from olivier: lineageOS ROM (as mentioned at: LineageOS thread )
those are NOT boot-tested but should work (need testing + feedback)

Reserved (3)
Notes:
The preamp of FauxSound or the actual sound/soc driver state seems to be a bit "mushy",
thus the white noise (swoosh-ing, hiss-ing) is a bit high - reduce headphone amp by 10 or 15 (-10 or -15) so that you get a clear and well-defined output,
it really depends on your headphones - with in-ear it is most likely more noticable.
This was with unmodified "stock"/"upstream" lineageOS kernel source and with a bit patched up - so nothing I can and will change
Kernel source:
https://github.com/zachariasmaladro...kami_r2/commits/Sun-Kernel_Pedigree_cm-14.1_I

Thanks, I hope you don't forget dsds variant.

It is a pleasure to have SunKernel in LineageOS.

Thanks @zacharias.maladroit
I will try after released stable LineageOS for dsds and SunKernel.

Flashing lineage and kernel, looking forward to try it
Thanks for upload

s.hossein said:
Thanks, I hope you don't forget dsds variant.
Click to expand...
Click to collapse
you have an up-to-date boot.img for dsds device ?
if yes, please upload

Thx! But After flashing this Kernel i couldnt Boot up. Stuck ar Boot Animation. But the Animation did not stopped.

Same here, bootloop, can u look up to this?
We are so glad you put efforts in custom kernel for lineage, looking forward for an update

zacharias.maladroit said:
you have an up-to-date boot.img for dsds device ?
if yes, please upload
Click to expand...
Click to collapse
I think the tree sources are unified so is there a need for special kernel for dsds? I'll try this one on my E6683.

stipi69 said:
Same here, bootloop, can u look up to this?
We are so glad you put efforts in custom kernel for lineage, looking forward for an update
Click to expand...
Click to collapse
please update to the lineageOS builds from Olivier,
unless he has uncommitted changes locally in his repos - there are no changes,
my lineageOS build is at patchlevel March 5th 2017,
so with recent changes the kernel (more precisely the ramdisk) might be incompatible with the old builds from @Myself5
balrajs99 said:
I think the tree sources are unified so is there a need for special kernel for dsds? I'll try this one on my E6683.
Click to expand...
Click to collapse
it might work, but you most likely run into a bootloop, too, if you're not using latest lineageOS builds (those from Olivier)

In this minute i downloaded fresh update, flashed in this order:
1. lineage-14.1-20170316-UNOFFICIAL-sumire
2. open_gapps-arm64-7.1-nano-20161104
3. UPDATE-SuperSU-v2.78-20160905010000
4. Z5_SK_Enf_v14.1_I.3_sum
lineage from olivier from below link:
https://dl.olivierk.at/sumire/lineage-14.1/
lineage-14.1-20170316-UNOFFICIAL-sumire
i still get bootloop, scren is dimed, lineage animation keeps going for couple of secs, screen goes bright and bootloop from there on, waiting 10+ minutes now... maybe old superuser zipfile for this task? dont know realy, will make clean install

zacharias.maladroit said:
it might work, but you most likely run into a bootloop, too, if you're not using latest lineageOS builds (those from Olivier)
Click to expand...
Click to collapse
Yes, on latest build by oliver it ran into bootloop.

actually this goes into bootloop, flashed latest olivier's lineageos.
edit : is there any proper order of flashing ? and can you share lineageos build that you are on ?

@zacharias.maladroit: Thank you a lot for your work. We should be very thankful to every developer on the Z5!
Just gave your Kernel a try on latest olivier's lineageos (0316). Got a bootloop. After 20 minutes, I did a power reset and dirty reflashed latest olivier's lineageos (0316) via TWRP. Telephone was functional again.

L33Tgod said:
actually this goes into bootloop, flashed latest olivier's lineageos.
edit : is there any proper order of flashing ? and can you share lineageos build that you are on ?
Click to expand...
Click to collapse
yes, currently uploading
I'd install LineageOS + gapps (opengapps),
go through all steps,
then go into TWRP, make a backup and attempt to flash the kernel.
I haven't flashed the ROM via zip,
I flashed it via the .img files and fastboot since the updater-script seemed to cause trouble ...
Link to custom LineageOS 14.1 build (patchlevel March 5th 2017)
not sure what differs between this and the other builds:
https://drive.google.com/open?id=0BykGGWB96CBQR1VIb3QtdGpsTmM
I initiated the fetch of the repo files via
lunch lineage_sumire-userdebug
and added the blobs repo,
then restarted the build ...
Click to expand...
Click to collapse
Can you guys post the content of the updater-script (in
Code:
tags), that works for you ?
I removed the assert line but it still didn't work for me,
also booting the stock ROM kernel via fastboot doesn't seem enough anymore,
it has to be flashed, then the VOL DOWN button pressed to reach TWRP on the recovery partition.
If you reach TWRP via a different method please let me know :)
Thanks

zacharias.maladroit said:
yes, currently uploading
I'd install LineageOS + gapps (opengapps),
go through all steps,
then go into TWRP, make a backup and attempt to flash the kernel.
I haven't flashed the ROM via zip,
I flashed it via the .img files and fastboot since the updater-script seemed to cause trouble ...
Can you guys post the content of the updater-script (in
Code:
tags), that works for you ?
I removed the assert line but it still didn't work for me,
also booting the stock ROM kernel via fastboot doesn't seem enough anymore,
it has to be flashed, then the VOL DOWN button pressed to reach TWRP on the recovery partition.
If you reach TWRP via a different method please let me know :)
Thanks[/QUOTE]
I flashed the rom by flashing pixn kernel then booting into twrp when purple led comes on and it flashes rom normaly and to access twrp later i have to use your stock kernel and type fastboot boot boot.img and it can go into recovery, but can't flash lineageos because of that error 7.
Click to expand...
Click to collapse

L33Tgod said:
I flashed the rom by flashing pixn kernel then booting into twrp when purple led comes on and it flashes rom normaly and to access twrp later i have to use your stock kernel and type fastboot boot boot.img and it can go into recovery, but can't flash lineageos because of that error 7.
Click to expand...
Click to collapse
yeah, that's why I wrote:
Can you guys post the content of the updater-script (in
Code:
tags), that works for you ?
I removed the assert line but it still didn't work for me,
also booting the stock ROM kernel via fastboot doesn't seem enough anymore,
it has to be flashed, then the VOL DOWN button pressed to reach TWRP on the recovery partition.
If you reach TWRP via a different method please let me know :)[/QUOTE]
might be that upstream changed the content of updater-script,
that's why I ask for a working variant ;)
Click to expand...
Click to collapse

[TWRP][OFFICIAL][3.2.2-0] TeamWin Recovery For Moto E4(woods)

TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.​
​
What's new in 3.2.2-0:
</> CHANGELOG : ? </>
Code:
Code:
* adb backup fixes
* OTA style update zips will now install automatically without prompting for decrypt
* minor tweaks to handling date/time on Qualcomm devices
* updates to some language translations
</> DOWNLOAD ? </>
https://twrp.me
​
$ TIP $
You can update it from previous TWRP recovery if you already have it installed, else install it as fresh by using adb or Official TWRP Installer app from google play store or similar
​
To flash with Fastboot/Adb:
Code:
Code:
make sure OEM-Unlocking is ON
$ adb reboot bootloader
$ fastboot flash recovery twrp-3.2.2-0-woods.img
To contribute:
TWRP Code Review
TeamWin
XDAevDB Information
Moto E4 ROMs, Kernels, Recoveries, & Other Development
Contributors
iykeDROID™ {dumbDevpr*}
Source Code: https://github.com/TeamWin
Version Information
Status: Stable
Created: 2018-07-12
Last Updated: 2018-07-13

Great news. Now I'm waiting for stable and fully working Oreo ROM and start flashing.

ka4o_pi4a said:
Great news. Now I'm waiting for stable and fully working Oreo ROM and start flashing.
Click to expand...
Click to collapse
from the looks of things on my side, i don't think that will happen in anytime too soon.
let's just hope for a God sent dev to take over the Moto E4(woods) development .

if any bug with the TWRP, create/open an issue regarding such bug on GitHub :
https://github.com/omnirom/android_bootable_recovery
( make sure to see how other issues were created and follow such trend )
thanks

I am getting a wrong architecture error (error 64 in twrp) when trying to flash ARM gapps.

EstebanxZ said:
I am getting a wrong architecture error (error 64 in twrp) when trying to flash ARM gapps.
Click to expand...
Click to collapse
wait for next update or use this at your own risk
https://t.me/motoe4woods/12179

Same here. Wrong architecture. Even the backup was corrupted and I wasn't able to flash back my stock ROM. This is my last Motorola device.

ka4o_pi4a said:
Same here. Wrong architecture. Even the backup was corrupted and I wasn't able to flash back my stock ROM. This is my last Motorola device.
Click to expand...
Click to collapse
i used it to install Both XOSP & Gapps Pico today.

Few days ago I was spent my day on trying to flash some ROM, but didn't manage to flash any (Pico,nano, micro, etc) gapps... All finished with the same error 64. Then I install last beta of twrp and successfuly install gapps, but can't boot into system (boot into recovery every time).

ka4o_pi4a said:
Few days ago I was spent my day on trying to flash some ROM, but didn't manage to flash any (Pico,nano, micro, etc) gapps... All finished with the same error 64. Then I install last beta of twrp and successfuly install gapps, but can't boot into system (boot into recovery every time).
Click to expand...
Click to collapse
please your issues on that specific ROM's thread.
As far as i know, the TWRP recovery works fine even before the unofficial beta... woods has come to it's best so far.
thanks.

Already do that. Also try with two or three different ROMs and get the same error. Doesn't matter, I'LL wait for some more stable version of twrp and some ROM.

Tks
Thanks man!

Laruzzo said:
Hi, this TWRP version to Moto E4 woods is not good.
It does not install GAPPS, and do not install SUPER SU.
With GAPPS the error is about 64 bits version. And with supersu it says that "Bad recovery no Unzip."
I tried with a unnoficial version and worked everything.
Please update in TWRP site to a new version with bug fix.
Look a this thread with the version that worked with Moto E4 woods.
https://forum.xda-developers.com/mo...rp-3-1-1-r1-port-xt1760-t3772249/post76177524
Click to expand...
Click to collapse
Dude,
learn how to read a full post with instructions & proper way of reporting an issue anywhere you find yourself.
Know you device SoC, Architecture, etc ... don't just talk any how.
also, commits has not been merged
see on gerrit.twrp.me :=> https://gerrit.twrp.me/#/c/android_device_motorola_woods/+/63/
Finally, always check to see if no one has report similar issue and been solved before you start writing sh*t into the air
https://postimages.org/
https://forum.xda-developers.com/showpost.php?p=77250466&postcount=6
NOTE : MOTO E4 SERIES IS ARM(32bit) Architecture Device, stop trying to flash/install ARM64 Gapps as you stop being dumb.

OK
Ok, I´m sorry you are the developer and I should thanks for your great work. May you please share here the alternative file that works with gapps? Because I cannot access telegram at the momment. Thank you very much and sorry again if my words was not good. I respect and admire your work.

Laruzzo said:
Ok, I´m sorry you are the developer and I should thanks for your great work. May you please share here the alternative file that works with gapps? Because I cannot access telegram at the momment. Thank you very much and sorry again if my words was not good. I respect and admire your work.
Click to expand...
Click to collapse
Download ⍖ ?
TWRP-323.0-Unofficial-woods.img

iykeDROID™ said:
TWRP is an open source, community project.
..
..iykeDROID™[/URL] {dumbDevpr*}
Source Code: https://github.com/TeamWin
[/SIZE][...his other way cause I doubt about official ¿‽​
Click to expand...
Click to collapse

Abish4 said:
Format Data Partition with F2FS format is not available which is usually available with every Moto Device Kernel
Click to expand...
Click to collapse
please deal with the kernel source here : https://github.com/MotorolaMobilityLLC/kernel-mtk/tree/nougat-7.1.1-release-woods
Abish4 said:
Can you help with this other way cause I doubt about official ¿‽
Click to expand...
Click to collapse
due to negligence, you couldn't check the source code here : https://github.com/TeamWin/android_device_motorola_woods
also check the twrp site : https://twrp.me/motorola/motorolamotoe4.html

I cannot flash gapps arm 7.1.x

Hi. I have one MotoE4 XT1763 Mediatek MT6735 with unlocked bootload.
would you recommend flashing the
twrp-3.2.3-0-woods.img 15.1M
Or the
TWRP-323.0-Unofficial-woods.img 15.5M
for the Lenovo Moto E4(XT1762)
?
Thank you peoples. TWRP unofficial working fine

Hey peoples. Accidentally i wiped my system. I have a backup in pc. I dont have sd card right now. How can i put the backup wich is in pc back to TWRP backup folder in order to restore ?

[RECOVERY][Android 10/11][Stock/SODP][XZ2/C/P/3] TWRP [UNofficial]

Central project page
https://forum.xda-developers.com/xperia-xz2/development/recovery-twrp-3-3-1-0-t4074305

11.06.2020
Switch to TWRP 3.4.0
sodp twrp 2020-06 security patch level
stock twrp 2020-05 security patch level for firmware 52.1.A.2.1
Now both twrp should work without a ROM being installed (empty system/vendor/oem partitions) and still be able to decrypt your userdata.
Also the stock twrp touch should now always work instead of playing russian roulette.
Click to expand...
Click to collapse

13.06.2020
Thanks to the fixes in 3.4.0 we got now a TWRP with the following enhancements for STOCK and SODP:
- This TWRP will work with future 10.0 ROMs, you don't need a new build matching the security patch level of your ROM.
- You can install this TWRP again with the buildin ramdisk patcher. Please follow the installation instructions.
Click to expand...
Click to collapse
Please test and report back if you got any touch / decryption problems.

MartinX3 said:
13.06.2020
Please test and report back if you got any touch / decryption problems.
Click to expand...
Click to collapse
@MartinX3
XZ2 Compact here, tried the Version from 0611 and 0613 and with both I got stuck at SONY Logo.. Where can I pull a log for you in this case?

TacoLoco said:
@MartinX3
XZ2 Compact here, tried the Version from 0611 and 0613 and with both I got stuck at SONY Logo.. Where can I pull a log for you in this case?
Click to expand...
Click to collapse
STOCK or SODP based ROM?
STOCK or SODP based TWRP?
You booted into fastboot with software and not with the hardware buttons?
And I hope you didn't flash it with "fastboot flash boot twrp.img"
you could try to press PWR+VolUP for a short time, then shortly after it should crash
Then you should be able to get the /sys/fs/pstore folder files in your system (needs root)
Or if that doesn't work maybe a dump of your TA partition.
You use a 10.0 ROM with kernel 4.14 (SODP) or kernel 4.9 (STOCK)?

MartinX3 said:
STOCK or SODP based ROM?
STOCK or SODP based TWRP?
You booted into fastboot with software and not with the hardware buttons?
And I hope you didn't flash it with "fastboot flash boot twrp.img"
you could try to press PWR+VolUP for a short time, then shortly after it should crash
Then you should be able to get the /sys/fs/pstore folder files in your system (needs root)
Or if that doesn't work maybe a dump of your TA partition.
You use a 10.0 ROM with kernel 4.14 (SODP) or kernel 4.9 (STOCK)?
Click to expand...
Click to collapse
SODP Based ROM and TWRP, did enter bootloader with hardware keys.. I know this stands under known bugs but wouldnt it be more idiot proof to write this into the installation section as a separate step?
Thanks Martin for your ongoing dedication!

TacoLoco said:
SODP Based ROM and TWRP, did enter bootloader with hardware keys.. I know this stands under known bugs but wouldnt it be more idiot proof to write this into the installation section as a separate step?
Thanks Martin for your ongoing dedication!
Click to expand...
Click to collapse
Aaaand added!
Nice to hear and thank you for your report!

MartinX3 said:
Aaaand added!
Nice to hear and thank you for your report!
Click to expand...
Click to collapse
Nice
But now running into the next issue, when executing "Fix Recovery Bootloop":
cd /tmp/repackorig/ && /sbin/magiskboot hexpatch kernel 77616E745F696E697472616D667300
736B69705F696E697472616D667300 process endet with ERROR: 1
Error patching kernel.
Click to expand...
Click to collapse
It boots me to TWRP every time, I think this is related..

TacoLoco said:
Nice
But now running into the next issue, when executing "Fix Recovery Bootloop":
It boots me to TWRP every time, I think this is related..
Click to expand...
Click to collapse
What happens if you reboot the twrp and try it again?
Or if you flash magisk and try to boot?
Do you use a modified kernel?
Did you "fastboot flash boot twrp.img" by accident?

14.06.2020
Reuploaded the stock TWRP with a later touch kernel modules initialization.
Hopefully fixing the randomly happening not working touch.
Click to expand...
Click to collapse

Hi there,
what is 'sodp' please ?

moltes74 said:
Hi there,
what is 'sodp' please ?
Click to expand...
Click to collapse
It's described on the first page of the central project thread.

MartinX3, thanks for all your work!
I have a xz2c dual and, thanks to your guides, backed up the TA partition and flashed the latest Unofficial TWRP recovery with the up to date stock image.
My experience is that the problem with some boots not having the touchscreen working is still there. Fortunately, after rebooting you get a new chance ... and sometimes it actually works.
I used TWRP to install the latest Official LineageOS 17.1. It worked well. However, after that, TWRP was replaced by Lineage Recovery (?!) and I'm now unable to boot into recovery with the Unofficial SODP TWRP to flash it back.
Any guess of what could be the problem? Do you plan to provide a version which would work with the Official LineageOS 17.1 image?

tanty0 said:
I used TWRP to install the latest Official LineageOS 17.1. It worked well. However, after that, TWRP was replaced by Lineage Recovery (?!) and I'm now unable to boot into recovery with the Unofficial SODP TWRP to flash it back.
Any guess of what could be the problem? Do you plan to provide a version which would work with the Official LineageOS 17.1 image?
Click to expand...
Click to collapse
Answering myself back. Yes, this is known and you have already stated that you plan to look at this whenever you find the time: https://forum.xda-developers.com/showpost.php?p=83172223&postcount=345 , and below ...

I'd like to flash my userbuild los 17.1... which file/version do I need? (Android 10>TWRP) Stock or SODP ??

02.03.2021
Reuploaded the SODP TWRP with a workaround for Android 11 compatibility.
Click to expand...
Click to collapse

CHEIb00 said:
I'd like to flash my userbuild los 17.1... which file/version do I need? (Android 10>TWRP) Stock or SODP ??
Click to expand...
Click to collapse
It is currently not compatible with the official LOS 17.1 due to technical limitations by google.

@MartinX3 - using twrp3.4 on eXistenZ Q, (stock-based 10), and working great, but...
- max brightness is too low. Can hardly see the screen in daylight. Any options?
- are there any newer TWRPs for XZ2c stock?
Thanks

levone1 said:
@MartinX3 - using twrp3.4 on eXistenZ Q, (stock-based 10), and working great, but...
- max brightness is too low. Can hardly see the screen in daylight. Any options?
- are there any newer TWRPs for XZ2c stock?
Thanks
Click to expand...
Click to collapse
Is there no brightness setting?
Only behind the download link.
Since stock reached end of life there won't be any new twrp for it.

MartinX3 said:
Is there no brightness setting?
Only behind the download link.
Since stock reached end of life there won't be any new twrp for it.
Click to expand...
Click to collapse
Max brightness as set in settings is very dim...

[CLOSED][SHARE] Lineage 18, Android 11 for Pixel 4a Sunfish

This is not my build. Credit ny-hardcore for all the hard work on this. I'm just posting it.
Screen call is broken.
This is Lineage 18, Android 11 custom rom for the Pixel 4a Sunfish
If you do not want root, you can stop after step 6
1. Reboot to bootloader
2. fastboot flash --slot all boot recovery.img https://drive.google.com/file/d/1Hh7D_UbnnoTRr1XbC9i0-dvtFgbuFqrP/view?usp=sharing
3. Reboot to recovery
4. factory reset
5. adb sideload lineage-18.0-20201209-UNOFFICIAL-sunfish.zip
https://mega.nz/file/cUlVXApI#NbzUJ6UlyQvyPTitKnW7uJG_tHrsfYor9O0dH4yIiWc
6. Reboot to system
7. Install Magisk Manager https://raw.githubusercontent.com/topjohnwu/magisk_files/canary/app-debug.apk
8. Reboot to bootloader
9. fastboot flash boot magisk_patched.img https://drive.google.com/file/d/1cONN9Ev0jdAHaRSeOeYyeRTONJ-yO_8-/view?usp=sharing
10. Reboot to system

Could you please provide a kernel and device source tree for this? I have an in-progress diff which I am working to get 18 running fully on the device. It doesn't boot yet, and I would like to know what I messed up.

liamwhite said:
Could you please provide a kernel and device source tree for this? I have an in-progress diff which I am working to get 18 running fully on the device. It doesn't boot yet, and I would like to know what I messed up.
Click to expand...
Click to collapse
Based on the fact that this is NOT my work as stated above, I'm NOT at liberty to tell you. No offense. I would contact xda member edmontonchef and ask him. He's the one who sent it to me. I would like to think this wouldn't be a issue because if it was mine, I wouldn't care, but it's not.

This is my build.
Device tree is based of DU trees (r11x branch) and vendor (also r11x)
Kernel is flar2 kernel with wifi merged in.

ny-hardcore said:
This is my build.
Device tree is based of DU trees (r11x branch) and vendor (also r11x)
Kernel is flar2 kernel with wifi merged in.
Click to expand...
Click to collapse
I'm using it right now. Great Rom. Thank you!!! Hope you don't mind I shared it.

Does this support signature spoofing?

Espio419 said:
Does this support signature spoofing?
Click to expand...
Click to collapse
Would doubt it, if it's just vanilla LOS

ny-hardcore said:
This is my build.
Device tree is based of DU trees (r11x branch) and vendor (also r11x)
Kernel is flar2 kernel with wifi merged in.
Click to expand...
Click to collapse
Are Gapps included. Looking for a non gapps rom

EggZenBeanz said:
Are Gapps included. Looking for a non gapps rom
Click to expand...
Click to collapse
No gapps. Minimal Google play service function are included in build.

Espio419 said:
Does this support signature spoofing?
Click to expand...
Click to collapse
No

TheSayaMan said:
No gapps. Minimal Google play service function are included in build.
Click to expand...
Click to collapse
Actually it contains gapps/Google play.

ny-hardcore said:
Actually it contains gapps/Google play.
Click to expand...
Click to collapse
I guess I assumed wrong. I thought he was referring to having to flash a seperate gapps zip.

Espio419 said:
Does this support signature spoofing?
Click to expand...
Click to collapse
i'm working on a microg edition using the notes from the guy who made the microG build for 4a 5G

ny-hardcore said:
i'm working on a microg edition using the notes from the guy who made the microG build for 4a 5G
Click to expand...
Click to collapse
Oh yeah! Would love to see that. I'm ready to hop from my pixel 3xl once there's a non gapps ROM available

New build updated in OP. Thank Senior Member ny-hardcore for this.
Changes: Lineage sources and kernel updated with latest google update. The boot.img was updated in the payload to eliminate a second boot flash after sideloading rom for working WiFi. Please report any bugs that I may have missed. Also, I never dirty flash over anything. They more than likely cause problems. I did a clean install of this. If you are on the previous build of this, I DO NOT recommend dirty flashing it.

TheSayaMan said:
New build updated in OP. Thank Senior Member ny-hardcore for this.
Changes: Lineage sources and kernel updated with latest google update. The boot.img was updated in the payload to eliminate a second boot flash after sideloading rom for working WiFi. Please report any bugs that I may have missed. Also, I never dirty flash over anything. They more than likely cause problems. I did a clean install of this. If you are on the previous build of this, I DO NOT recommend dirty flashing it.
Click to expand...
Click to collapse
Flashed and running well. WiFi worked right away. I noticed the boot.IMG in the op has stock recovery so I used the derpfest boot.IMG for flashing instead.
Also it's still November ASB?

Edmontonchef said:
Flashed and running well. WiFi worked right away. I noticed the boot.IMG in the op has stock recovery so I used the derpfest boot.IMG for flashing instead.
Also it's still November ASB?
Click to expand...
Click to collapse
I haven't been able to check everything out. One thing I just noticed is that I am unable to pass safetynet with it but not a big deal for me.

Edmontonchef said:
Flashed and running well. WiFi worked right away. I noticed the boot.IMG in the op has stock recovery so I used the derpfest boot.IMG for flashing instead.
Also it's still November ASB?
Click to expand...
Click to collapse
The boot in OP will work as well so take your pick and yes I did notice its still November. He's working on another build though.

TheSayaMan said:
The boot in OP will work as well so take your pick and yes I did notice its still November. He's working on another build though.
Click to expand...
Click to collapse
december hasnt been merged in lineage sources

Is the boot.img a twrp recovery or? I am coming from stock, so would i need to touch twrp at all for this?

Question Has Anyone Compiled AOSP 13 and Booted It?

I'm just curious whether anyone has already compiled the AOSP for A13 and booted it. I noticed it had already been done/tested on OP5/5T, but wasn't sure if it had been done for P6P. I plan on trying my hand at it, but wanting to know what others may have experienced before I commit my slower internet connection to downloading the Repo.

GrapheneOS has test builds up for A13, which should be buildable using the normal approach. Also hardened with some extra security features.

Yes, on ArrowOS, temp issues however that was same day arrow started updating to 13, have not run a build since. Evolution X reboot a few seconds after setup screen loads, does not boot without gapps either.

I have tried for several days, but I'm missing something
It's a custom rom for personal use. A12.1 booted and worked perfectly but 13 reboots to bootloader
RealSchnedi - Repositories
RealSchnedi has 15 repositories available. Follow their code on GitHub.
github.com

Schnedi said:
I have tried for several days, but I'm missing something
It's a custom rom for personal use. A12.1 booted and worked perfectly but 13 reboots to bootloader
RealSchnedi - Repositories
RealSchnedi has 15 repositories available. Follow their code on GitHub.
github.com
Click to expand...
Click to collapse
Stupid question have you flashed both slots with 13 as I know boot loader won't load of you have 12 version and not updated to 13 but also it has an anti roll back in it sorry not much help

liggerz87 said:
Stupid question have you flashed both slots with 13 as I know boot loader won't load of you have 12 version and not updated to 13 but also it has an anti roll back in it sorry not much help
Click to expand...
Click to collapse
I flashed the bootloader and radio on both slots but haven't tried to change the current slot and flash the rom
But if I flash the official 13 release (only in the current slot) it boots, so, not sure if that's the problem. Anyway, I'll try it

Schnedi said:
I flashed the bootloader and radio on both slots but haven't tried to change the current slot and flash the rom
But if I flash the official 13 release (only in the current slot) it boots, so, not sure if that's the problem. Anyway, I'll try it
Click to expand...
Click to collapse
Been looking at our github, you are using anayw2001 repo for your vendor files, remove the below from Android.bp. I had Restless nights with a poop load of testing thinking it was something with a missing lib file or so when i test anay's vendor files with lots of comparison to lineage extract tools that worked. Well if your getting bootonce-bootloader error that is as reason for bootloader load.
prebuilt_apex {
name: "com.google.android.compos",
owner: "google_devices",
src: "system_ext/apex/com.google.android.compos.apex",
prefer: true,
system_ext_specific: true,
}
prebuilt_apex {
name: "com.google.android.virt",
owner: "google_devices",
src: "system_ext/apex/com.google.android.virt.apex",
prefer: true,
system_ext_specific: true,
}

alvin14 said:
Yes, on ArrowOS, temp issues however that was same day arrow started updating to 13, have not run a build since. Evolution X reboot a few seconds after setup screen loads, does not boot without gapps either.
Click to expand...
Click to collapse
Update on this for ArrowOS. After removing connectivitythernmalmanager that fixed the issue as i am getting selinux denials with it, everything works, been testing for a few days.

alvin14 said:
Been looking at our github, you are using anayw2001 repo for your vendor files, remove the below from Android.bp. I had Restless nights with a poop load of testing thinking it was something with a missing lib file or so when i test anay's vendor files with lots of comparison to lineage extract tools that worked. Well if your getting bootonce-bootloader error that is as reason for bootloader load.
prebuilt_apex {
name: "com.google.android.compos",
owner: "google_devices",
src: "system_ext/apex/com.google.android.compos.apex",
prefer: true,
system_ext_specific: true,
}
prebuilt_apex {
name: "com.google.android.virt",
owner: "google_devices",
src: "system_ext/apex/com.google.android.virt.apex",
prefer: true,
system_ext_specific: true,
}
Click to expand...
Click to collapse
I was already using your vendor from gitlab (arrow branch). It did the trick, bootloader not triggered anymore
Still not booting but it must be related to rom sources, will take a look
Thanks a lot

Schnedi said:
I was already using your vendor from gitlab (arrow branch). It did the trick, bootloader not triggered anymore
Still not booting but it must be related to rom sources, will take a look
Thanks a lot
Click to expand...
Click to collapse
Do a logcat during boot, will definitely help with that.

card13 said:
I'm just curious whether anyone has already compiled the AOSP for A13 and booted it. I noticed it had already been done/tested on OP5/5T, but wasn't sure if it had been done for P6P. I plan on trying my hand at it, but wanting to know what others may have experienced before I commit my slower internet connection to downloading the Repo.
Click to expand...
Click to collapse
There is a build of Hentai which is very good. You can even dirty flash from stock

alvin14 said:
Do a logcat during boot, will definitely help with that.
Click to expand...
Click to collapse
Thanks, I'm making some tests, not so sure it's the rom sources
Question, to build Evo and Arrow, are you using your adevtool vendor or the other one?

Schnedi said:
Thanks, I'm making some tests, not so sure it's the rom sources
Question, to build Evo and Arrow, are you using your adevtool vendor or the other one?
Click to expand...
Click to collapse
Adevtool. The other one works as well however i need to clean it up a bit.

hi guys,
@Schnedi what gapps package are you using for prime?
And does udfps work on your raven with your prime base?

Well, after a dozen of test builds, I finally made it work
Still have to fix things tho

Schnedi said:
Well, after a dozen of test builds, I finally made it work
Still have to fix things tho
Click to expand...
Click to collapse
Cool. I got oriole too boot prime yesterday too. Nice work!
What gapps package do you use? Is it on gitlab somewhere?

ny-hardcore said:
Cool. I got oriole too boot prime yesterday too. Nice work!
What gapps package do you use? Is it on gitlab somewhere?
Click to expand...
Click to collapse
I'm using this one: https://gitlab.com/spkal01/android_vendor_gms/-/tree/pyro
But removed some apps that can be installed from the store (drive, youtube, gmail, photos...)
Also, latest commit from fw/b fixes udfps
There's just a few features, I just pick the ones I use, didn't build prime to share it, so I'm not picking all of them. You can always fork the project and pick some features you use, PM me if you need any help with it

Schnedi said:
I'm using this one: https://gitlab.com/spkal01/android_vendor_gms/-/tree/pyro
But removed some apps that can be installed from the store (drive, youtube, gmail, photos...)
Also, latest commit from fw/b fixes udfps
There's just a few features, I just pick the ones I use, didn't build prime to share it, so I'm not picking all of them. You can always fork the project and pick some features you use, PM me if you need any help with it
Click to expand...
Click to collapse
Thanks for the reply, i spark gapps too by the way haha
i picked udfps myself so had it working already
i like your vendor /vendor/extras very clean setup.
i know how to fork, but no need for now