Develop Bugs

Soft Bricked - Unable to Sideload OTA

Hi all,
My Nexus 5x (16gb - all stock.) went and soft bricked today. Not sure why - just seemed to start wanting to constantly restart - never making it past the white google text part of the boot process. Not sure if it's an update or hardware. No trauma or dropping of the phone - which makes me think s/w rather than h/w.
I have attempted to install a rescue OTA update (instructions I followed are from technobill - don't have enough posts to add a link). However, when running "adb sideload <file>" I get a "failed to read command" error. Have tired multiple cables/ports however to no avail.
(Recovery screen shows the following build details: 7.0/NBD90W/3239497)
Any ideas?
Thanks.
Somewhat Irked

SomewhatIrked said:
Hi all,
My Nexus 5x (16gb - all stock.) went and soft bricked today. Not sure why - just seemed to start wanting to constantly restart - never making it past the white google text part of the boot process. Not sure if it's an update or hardware. No trauma or dropping of the phone - which makes me think s/w rather than h/w.
I have attempted to install a rescue OTA update (instructions I followed are from technobill - don't have enough posts to add a link). However, when running "adb sideload <file>" I get a "failed to read command" error. Have tired multiple cables/ports however to no avail.
(Recovery screen shows the following build details: 7.0/NBD90W/3239497)
Any ideas?
Thanks.
Somewhat Irked
Click to expand...
Click to collapse
Did your phone just reboot in the middle of doing something innocuous then start bootlooping? Were/Are you on total stock with bootloader locked? If both yes, it is probably hardware issue you are encountering.
Regarding sideloading, did you place your Android recovery in sideload mode?
Did you verify adb can "see" your device using "adb devices"?

SomewhatIrked said:
Hi all,
My Nexus 5x (16gb - all stock.) went and soft bricked today. Not sure why - just seemed to start wanting to constantly restart - never making it past the white google text part of the boot process. Not sure if it's an update or hardware. No trauma or dropping of the phone - which makes me think s/w rather than h/w.
I have attempted to install a rescue OTA update (instructions I followed are from technobill - don't have enough posts to add a link). However, when running "adb sideload <file>" I get a "failed to read command" error. Have tired multiple cables/ports however to no avail.
(Recovery screen shows the following build details: 7.0/NBD90W/3239497)
Any ideas?
Thanks.
Somewhat Irked
Click to expand...
Click to collapse
Well luckily I made this post today.

The more this goes on, the more I believe it to be hardware ...
@sfhub - reasonably innocuous. Had just opened one or 2 apps that morning. Not sure what had updated overnight app/os wise. Not anything interesting as far as I can tell. Once I managed to get it into recovery "adb devices" was returning the phone.
@bardhi92 - I saw that once I got in. However, I couldn't get it to see my phone.
Updated things I have tried and why I've all but thrown in the towel:
After the OTA rescue sideload failed I started trying a few different things. It stopped taking me into recovery mode more frequently, at least it seemed that way - it would just keep bootlooping. My main issue is that I has a locked bootloader, which stopped me whacking TWRP on and loading on a custom rom - just to see if that worked.
I thought it might let me sideload on a factory default img file. Turns out nope.
However I used NRT to "Flash Stock + Unroot" (with "Soft Brick/Bootloop" checked) which for some reason, then allowed me to get back into recovery mode. I had also removed the sim card/tray at this point. May have been either or neither of those that allowed me to get into recovery mode. Can't say for certain.
I cleared /cache and /data and then attempted the OTA rescue update again. This time it failed at 45% (according to my cmd prmpt) with the error: "* failed to read command: No error". I'm not sure text was on the phone at the time. But it did manage to boot into Android. I quickly stepped through the various intro steps (putting in the sim, adding my mail google account details).
I went to get a beer. Only to find it boot looping again.
Not to be deterred, I vowed to try again. Same steps as before (remove sim, nrt voodoo). This time however the OTA rescue worked and fully completed. I went through the intro steps again. This time I quickly turned on dev options, enabled usb debugging and sorted out the OEM bootloader. I thought this would be smart, just in case it hapened again. Once I chose to unlock ("fastboot reboot", selected yes), it decided to start boot looping again.
The main annoyance is: I don't think I have any proof of purchase, even though it's in warranty. That, and I now live in Dubai - so shipping back to the UK where I brought it is going to be killer. But I think it's the path of least resistance at the moment.

SomewhatIrked said:
The more this goes on, the more I believe it to be hardware ...
@sfhub - reasonably innocuous. Had just opened one or 2 apps that morning. Not sure what had updated overnight app/os wise. Not anything interesting as far as I can tell. Once I managed to get it into recovery "adb devices" was returning the phone.
@bardhi92 - I saw that once I got in. However, I couldn't get it to see my phone.
Updated things I have tried and why I've all but thrown in the towel:
After the OTA rescue sideload failed I started trying a few different things. It stopped taking me into recovery mode more frequently, at least it seemed that way - it would just keep bootlooping. My main issue is that I has a locked bootloader, which stopped me whacking TWRP on and loading on a custom rom - just to see if that worked.
I thought it might let me sideload on a factory default img file. Turns out nope.
However I used NRT to "Flash Stock + Unroot" (with "Soft Brick/Bootloop" checked) which for some reason, then allowed me to get back into recovery mode. I had also removed the sim card/tray at this point. May have been either or neither of those that allowed me to get into recovery mode. Can't say for certain.
I cleared /cache and /data and then attempted the OTA rescue update again. This time it failed at 45% (according to my cmd prmpt) with the error: "* failed to read command: No error". I'm not sure text was on the phone at the time. But it did manage to boot into Android. I quickly stepped through the various intro steps (putting in the sim, adding my mail google account details).
I went to get a beer. Only to find it boot looping again.
Not to be deterred, I vowed to try again. Same steps as before (remove sim, nrt voodoo). This time however the OTA rescue worked and fully completed. I went through the intro steps again. This time I quickly turned on dev options, enabled usb debugging and sorted out the OEM bootloader. I thought this would be smart, just in case it hapened again. Once I chose to unlock ("fastboot reboot", selected yes), it decided to start boot looping again.
The main annoyance is: I don't think I have any proof of purchase, even though it's in warranty. That, and I now live in Dubai - so shipping back to the UK where I brought it is going to be killer. But I think it's the path of least resistance at the moment.
Click to expand...
Click to collapse
So, you flashed the .TOT file, sideloaded the given OTA within the stock recovery bootloader that comes with the .TOT file, and cleared cache/factory reset?
Please condense it. If you managed to start up the phone, that's a huge success for people who have not been able to yet.

bardhi92 said:
So, you flashed the .TOT file, sideloaded the given OTA within the stock recovery bootloader that comes with the .TOT file, and cleared cache/factory reset?
Please condense it. If you managed to start up the phone, that's a huge success for people who have not been able to yet.
Click to expand...
Click to collapse
In short:
OTA rescue failed during adb sideload,
Tried bullhead-nbd90w-factory-d2f11c5f.zip & removed sim tray - seemed to allow access to recovery mode,
OTA rescue claims to have failed at 47% during adb sideload- still booted into android. However briefly. Went back to bootloop,
Tried bullhead-nbd90w-factory-d2f11c5f.zip & removed sim tray - seemed to allow access to recovery mode,
OTA rescue completed via adb sideload,
Turned on dev options (usb debug, oem unlock),
Booted to fastboot - unlocked bootloader. Now back to bootlooping
@bardhi92 - I could not get the LG utility to detect my phone. Will attempt again tomorrow.

SomewhatIrked said:
@bardhi92 - I could not get the LG utility to detect my phone. Will attempt again tomorrow.
Click to expand...
Click to collapse
IMO you shouldn't flash the TOT file. If you end up bootlooping again, your phone will be stuck in bootloader locked mode with no ability to unlock it.
If you were able to get your phone to boot into android once, there is really nothing the TOT file will do for you that you can't do from TWRP or bootloader, whereas once it locks your bootloader, there are problems you can no longer fix like EFS corruption (which likely isn't your problem).
In the end, you probably do have eMMC that is slowly starting to fail. There is usually error correction on the eMMC that can lock out bad blocks but if it gets to serious, it'll fail. This is why reflashing stuff over and over sometimes works.

Help with Note 4 please

I may have a bricked phone on my hands, my fault I guess.
Although, I feel TWRP should share at least some of the blame.
I'm hoping someone can help to get me going again.
Last Xmas I got a refurbished Note 4 from Ebay and followed directions
here to root it. This all went well, I put TWRP 3.0.2 and Jasmine on it,
and it has worked just fine since then.
A couple days ago I realized I hadn't made a Nandroid backup of my phone
lately so I went into TWRP and did so. This went just fine and I stored
the backup on the external SD card.
A few hours later I bought a cheap home controller from Ebay. The controller
brand name is "Vera" and despite all of the negative comments on Google Play
I went ahead and installed the app. For the next day or two my phone began to
hang, stall, hesitate, whatever... and I remembered installing that app from
Google play so I went into the app manager and selected the uninstall option.
This caused the phone to hang indefinitely, I had to cycle the power button to
regain control. I then went back to Google Play and downloaded an uninstaller
program, told it to uninstall the vera app. It tried for a long time but
eventually gave up. "Uninstall failed" was all it would say.
So to stop this Vera app from hanging my phone I ran a freeze program ("Freeze"
is the actual name of the program) and had the vera app frozen. This worked, my
phone began to respond normally again. But I didn't like having this bad software
in my phone and that is when I remembered the recent TWRP backup.
I decided to do a complete restore with TWRP. TWRP did a restore of boot - (success),
recovery - (success), system - (success), data - "ERROR extractTarFork() process ended
with ERROR=255". Thanks TWRP, that really tells me a lot...
I repeated the restore effort a total of three times and same results. Google
wasn't much help, one suggestion was to unmount the data partition and try again.
Same results. Same error. Another suggestion was “stop and learn how to fix it”, well
sure, but I need a solution right now, I don’t have time right now for the learning part.
This is probably my first *big* mistake, I exited TWRP to see If I could boot
the OS and maybe fix it from there, (factory restore or something...). As you might
have guessed, it wouldn't boot the system with an incomplete data partition. I
suspected it too but I was desperate to try something. It would have been nice if TWRP
had warned me not to exit, instead of just saying "error 255..." because now it wont
boot back into recovery, just hangs. Odin mode appears to be working but I suspect it isn't.
It looks like it enters odin mode just fine, but odin can't see it.
So here is where it stands at the moment:
SYSTEM - Wont boot. Shows the Samsung logo, shows "custom", hangs at this point.
RECOVERY- Wont enter recovery mode. Small text in upper left says it is entering recovery
mode then it hangs.
ODIN/DOWNLOAD - Appears to enter this mode, usual screen appears, will not communicate
with Odin, will not communicate with adb.
One other note, the external sd card has a copy of the twrp log file written to it, as well
as the nandroid backup. But plugging the sd card into an adapter and then into a pc... It
says it can’t read it, and would I like to format it(?).
And of course there is valuable information on the phone.
I've run out of ideas, I'm asking anyone who is still reading this lengthy message(apologies)
for any other options, suggestions, any hope at all, instead of just throwing it in the trash.
Thanks for reading. I hope the dialog was understandable.
RT
UPDATE:
Progress. I have odin talking with the phone now, was able to re-flash TWRP and boot into it.
Still getting error 255. I am under the impression that this means I am out of space???
I pulled the recovery logs with adb, here is the relevant lines:
==> extracting: //data/app/radiotime.player-1/lib/arm/libtunein.uap.so (file size 5499572 bytes)
I:Unable to extract tar archive '/external_sd/TWRP/BACKUPS/657e54fc/2017-04-08--07-58-24_JasmineROM_v7.0-MMB29M.N910VVRU2CPF3/data.ext4.win001'
Error during restore process.
I:Error extracting '/external_sd/TWRP/BACKUPS/657e54fc/2017-04-08--07-58-24_JasmineROM_v7.0-MMB29M.N910VVRU2CPF3/data.ext4.win001' in thread ID 0
I:Error extracting split archive.
Error during restore process.
extractTarFork() process ended with ERROR: 255
I:Set page: 'action_complete'
Iperation_end - status=1
I still don't understand "error 255" well enough to proceed. Google is not a wealth of information when it comes to this subject. Any suggestions on how to proceed are greatly appreciated.
thanks!
RT
LAST UPDATE:
I want to thank everyone here for all the help. Or the lack there of.
Since I had Odin and TWRP both working, I reconstructed the phone from scratch.
Re-rooted and re-installed Jasmine. So I am back up and running now, I just need
to get all the apps re-installed and configured.
But I must say that I am really disappointed with the lack of support from this forum.
It used to be that people were falling all over each other to help others out.
But 3 days and 49 views and not one of you had anything to say.
I guess that's what happens to all forums sooner or later, the newbies here don't know what
to say and are just looking for answers to their own issues, and the regulars become jaded
over time and can't be bothered anymore.
I used to think this forum was awesome, but now its just another forum like all the rest.
I will look to other websites for any future learning.
To the Admin: (If you can be bothered for a moment)You can close this thread, I consider
the issue resolved, and you can close my account too, I won't be back.
Good luck to you guys.
RT

RootieTootie said:
I may have a bricked phone on my hands, my fault I guess.
Although, I feel TWRP should share at least some of the blame.
I'm hoping someone can help to get me going again.
Last Xmas I got a refurbished Note 4 from Ebay and followed directions
here to root it. This all went well, I put TWRP 3.0.2 and Jasmine on it,
and it has worked just fine since then.
A couple days ago I realized I hadn't made a Nandroid backup of my phone
lately so I went into TWRP and did so. This went just fine and I stored
the backup on the external SD card.
A few hours later I bought a cheap home controller from Ebay. The controller
brand name is "Vera" and despite all of the negative comments on Google Play
I went ahead and installed the app. For the next day or two my phone began to
hang, stall, hesitate, whatever... and I remembered installing that app from
Google play so I went into the app manager and selected the uninstall option.
This caused the phone to hang indefinitely, I had to cycle the power button to
regain control. I then went back to Google Play and downloaded an uninstaller
program, told it to uninstall the vera app. It tried for a long time but
eventually gave up. "Uninstall failed" was all it would say.
So to stop this Vera app from hanging my phone I ran a freeze program ("Freeze"
is the actual name of the program) and had the vera app frozen. This worked, my
phone began to respond normally again. But I didn't like having this bad software
in my phone and that is when I remembered the recent TWRP backup.
I decided to do a complete restore with TWRP. TWRP did a restore of boot - (success),
recovery - (success), system - (success), data - "ERROR extractTarFork() process ended
with ERROR=255". Thanks TWRP, that really tells me a lot...
I repeated the restore effort a total of three times and same results. Google
wasn't much help, one suggestion was to unmount the data partition and try again.
Same results. Same error. Another suggestion was “stop and learn how to fix it”, well
sure, but I need a solution right now, I don’t have time right now for the learning part.
This is probably my first *big* mistake, I exited TWRP to see If I could boot
the OS and maybe fix it from there, (factory restore or something...). As you might
have guessed, it wouldn't boot the system with an incomplete data partition. I
suspected it too but I was desperate to try something. It would have been nice if TWRP
had warned me not to exit, instead of just saying "error 255..." because now it wont
boot back into recovery, just hangs. Odin mode appears to be working but I suspect it isn't.
It looks like it enters odin mode just fine, but odin can't see it.
So here is where it stands at the moment:
SYSTEM - Wont boot. Shows the Samsung logo, shows "custom", hangs at this point.
RECOVERY- Wont enter recovery mode. Small text in upper left says it is entering recovery
mode then it hangs.
ODIN/DOWNLOAD - Appears to enter this mode, usual screen appears, will not communicate
with Odin, will not communicate with adb.
One other note, the external sd card has a copy of the twrp log file written to it, as well
as the nandroid backup. But plugging the sd card into an adapter and then into a pc... It
says it can’t read it, and would I like to format it(?).
And of course there is valuable information on the phone.
I've run out of ideas, I'm asking anyone who is still reading this lengthy message(apologies)
for any other options, suggestions, any hope at all, instead of just throwing it in the trash.
Thanks for reading. I hope the dialog was understandable.
RT
UPDATE:
Progress. I have odin talking with the phone now, was able to re-flash TWRP and boot into it.
Still getting error 255. I am under the impression that this means I am out of space???
I pulled the recovery logs with adb, here is the relevant lines:
==> extracting: //data/app/radiotime.player-1/lib/arm/libtunein.uap.so (file size 5499572 bytes)
I:Unable to extract tar archive '/external_sd/TWRP/BACKUPS/657e54fc/2017-04-08--07-58-24_JasmineROM_v7.0-MMB29M.N910VVRU2CPF3/data.ext4.win001'
Error during restore process.
I:Error extracting '/external_sd/TWRP/BACKUPS/657e54fc/2017-04-08--07-58-24_JasmineROM_v7.0-MMB29M.N910VVRU2CPF3/data.ext4.win001' in thread ID 0
I:Error extracting split archive.
Error during restore process.
extractTarFork() process ended with ERROR: 255
I:Set page: 'action_complete'
Iperation_end - status=1
I still don't understand "error 255" well enough to proceed. Google is not a wealth of information when it comes to this subject. Any suggestions on how to proceed are greatly appreciated.
thanks!
RT
LAST UPDATE:
I want to thank everyone here for all the help. Or the lack there of.
Since I had Odin and TWRP both working, I reconstructed the phone from scratch.
Re-rooted and re-installed Jasmine. So I am back up and running now, I just need
to get all the apps re-installed and configured.
But I must say that I am really disappointed with the lack of support from this forum.
It used to be that people were falling all over each other to help others out.
But 3 days and 49 views and not one of you had anything to say.
I guess that's what happens to all forums sooner or later, the newbies here don't know what
to say and are just looking for answers to their own issues, and the regulars become jaded
over time and can't be bothered anymore.
I used to think this forum was awesome, but now its just another forum like all the rest.
I will look to other websites for any future learning.
To the Admin: (If you can be bothered for a moment)You can close this thread, I consider
the issue resolved, and you can close my account too, I won't be back.
Good luck to you guys.
RT
Click to expand...
Click to collapse
sorry we missed your call gratz on the working phone . you know what they say "give a man a fish he ****s up his phone .....

Stuck in setup wizard after factory reset

Alright, hello everyone,
I'm having a pretty weird issue here. I've flashed my DUK-L09 and the C432B183 EU Firmware, everything was running fine.
I couldn't make a backup of the /data/ partition though, someone told me to wipe the data to decrypt it, but nothing came good after this.
So I tried to flash back the old recovery image by extracting it, flashing it via fastboot, as I would normally do; enter the factory reset, run it.
Everything is good, it goes up to 100% pretty fast, less than 2 minutes. I then enter the setup wizard the NFC is acting weird. It keeps activating
and deactivating illogically. So, ignoring this issue, I kept up configuring the phone then once I'm logged in Google and sync'd, pops a Huawei ID
logging page really really fast then goes back to the EMUI menu at the beginning of the Setup, in an infinite loop.
Useful information to let you help me better:
- Many firmwares. Currently trying to flash back to B120a and NoCheck from OldDroid and Morph. (Edit: Didn't work)
- Phone unlocked, TWRP accessible.
- Getting a weird "Error 9" when trying to run Update.zip from TWRP.
- Sideload working, but not transferring anything.
- Cannot find any B182 or B130 stock firmware. Everything seems to be gone from Huawei's servers.
- The loading logo isn't Honor anymore but Android, for a reason I can't yet understand.
- Restoring a clean backup (without /data/, since I couldn't back it up) did not fix the problem.
- Trying to update with the 3 buttons do not work, even with the right firmware (C432B183) (Software install failed)
- Factory reset works with the right ROM, but gets me to the setup loop issue.
- The loop occurs when I am supposed to see the Huawei ID setup page. If I do not put any SIM card, or WiFi
I am prompted to choose which way to restore data; if I skip this step, it blinks and doesn't do anything.
- I tried to restore via WiFi (Google's cloud stored data from my account), but it does the same thing as mentioned
earlier. It blinks multiple times rapidly the "Huawei ID" setup page then goes back to the first Setup screen w/o
me being able to do anything about that.
I'll be glad if you knew the answer to this, because I'm all lost right now.
Greetings, Kameyuu.

UP !
After many tries and a LOT of hard work, and spent an entire night (was about to spend the second night on this), I found the culprit and now I know what the issue is, it sounds completely legitimate.
So here are the reason and the solution to this issue:
Actually, my CUST was somehow broken. I never flashed it back because no one told me to flash the CUST.img back. They told me to flash BOOT, SYSTEM, and RECOVERY only.
So, after I downloaded a software called HUAWEI Multi-Tool (From hwmt.ru) I noticed they were also asking for the CUST.img and USERDATA.img (<- this one was apparently optional)
So, trying my luck I flashed it. Did a factory reset, and all, it acted weird and failed, then I tried again and it succeeded. So, with all my hope I booted the phone to the system, started configuring... And it worked !
I was able to set up the phone. For a -yet- unknown reason, some apps look missing and the NFC is still blinking on and off repeatedly and randomly, but I'm investigating that.
If you have any question on the precise steps feel free to send me a PM or ask in the thread directly I'll be glad to sort your issue out.

[EDIT]
Sorry, double post I don't know why my message was posted twice. Feel free to delete this message @moderators

[Partialy Bricked] H815 - how to get to stock

Hello Guys
My friend ask me for get a Lineage OS to his H815 with Nougat. I agreed as I made few successful changes from stock to Lineage OS with Samsungs and older LGs (like L3 E400). But G4 is really more complicated, more than I expected . Firstly I wanted to unlock this phone with FWUL, so I download a VirtualBox emulated image with FWUL and after it boots I opened SALT program and it detects the phone. I made a basic backup and then I choosed Unlock G4 (UsU). After that some windows pop up. Last window was a pre-checking, when the bar gets to the end window closed and nothing more was happening. So after almost hour of waiting I just turned off the phone - I thought its all. After that while phone is booting I have those messages in the left top corner:
[820]-----------------------
[870]
[920] Secure boot error!
[970] Error code : 1009
[1020[ OFFICIAL !!
[1070]
[1120]-----------------------
Its booting, but only sometimes its normal boot, most starts are with bootloop, sometimes its start after 10 restarts, sometimes after 2nd restart, sometimes after plug in/plug out USB cable it starts boot normally (connecting cable only to phone, not to PC), sometimes only thing that helps is to take out the battery. I made full wipe to be sure that its not a software problem, but only thing I achived with that is fact that phone has a Nougat and now it have a Marshmallow. It is (was?) H815, but now model name is LGLS991 (?), it gets very long until it shows software version (V20g), IMEI is unknow, even when I type *#06# I get the null response.
I can get into recovery, can put phone into download mode. But i'm not able to do anything to get LOS or a least Nougat.
I've read many, many tutorials how to get G4 working properly after unsuccessful unlock, but nothing helps. What I've tried:
1. Flashing stock Nougat for H815 with LGUP, installed USB drivers, proper DLL, set com to 41, but when I trying to flash, after a 4% i get error: KDZ file is invalid. Downloaded few KDZ firmwares, dont belive that every single one is invalid, there is something wrong with LGUP or with settings, but I cant find what
2. Flashing with LG Flash Tool 2014: tried both normal flash and cse flash and always stoping in the same moment, with "Connection to server failed. Try again in a moment". Read many tutorials about this error, none was helpful in my case.
3. Flashing with LG Flash Tool v1.8.1.1023 and a TOT file, but after select of dll and tot file and press the yellow arrow I get an error: "Failed PreviousLoad()"
Tried all this methods on second computer but without a luck.
What else can I try to get this G4 working properly? Maybe try to install some rom from stock recovery? But which rom will be ok and dont get things worst?
If you need more info dont hesitate to ask. Would be very greatful for any advices .

you definitely didn't read enough... go to read again the UsU thread and as you've read the whole tutorial, you can also read the whole FAQ and the OP, because 90% of what you pointed out in your publication (which incidentally is in the wrong section) is explained there.
A quick advice: Don't try to flash any KDZ/TOT again.

Need OTA file for Cheryl-ckh (three carrier version!)

Hello there!
I just bought a Razer Phone from a guy who said that it has a bad motherboard...I bought it pretty cheap and tried to revive it, because why not, i ve done this to other phones.
The phone was somehow reset, it boots until the setup wizard, where i can set the language , emergy call or maginification without problems...
The problem is that if i press " Get Started ", it popps a message like "setup wizard keeps stopping" and so on...i cant pass that screen, the message appears everytime i press "get started" button.
So, i tried flashing... The phone boots like is an unlocked one, but no fastboot/adb ?!
So, the only chance was adb sideload. I pushed different roms / factory images... Nothing.
Hardly, i found an OTA.ZIP file, and tried to sideload it. It worked till 47% ... Then, it said that "PACKAGE IS FOR CHERYL BUT EXPECTED CHERYL-CKH"... not a single rom/factory image worked like this... It loads near 50%, when the other stop right after start.
Later, i discovered i have the US carrier version cheryl-CKH ... And i cant find it's OTA...if one of you can provide me, i ll be very grateful, even buy you a beer or smth.
Thank you ! And please help me...
Edit: i also tried with EDL mode, with Qualcomm Flash Image Loader , but i dont have/know the Programmer Path & Search Path.

I'd advise to unlock the bootloader following the instructions here; make sure to unlock the critical partition as well.
https://developer.razer.com/razer-phone-dev-tools/general-instructions/
Then flash the stock factory image of your choice from here;
https://developer.razer.com/razer-phone-dev-tools/factory-images/
When you unzip these factory images, there is a flash_all.bat file to double click and it should do it all for you.
The phone should be good to go after this. I did this recently on my razer after spending some time flashing some of the 9.0 pie GSI images and it worked great.