I had to try to install a rom, because the screen turn black and no charge no sounds no ligths. What could i do with It?
Rtorlop said:
I had to try to install a rom, because the screen turn black and no charge no sounds no ligths. What could i do with It?
Click to expand...
Click to collapse
What rom did you try to install and what was the way you tried to install it? Does your pc still recognise the device when you plug it in? Fastboot or bootloader still availible?
Rtorlop said:
I had to try to install a rom, because the screen turn black and no charge no sounds no ligths. What could i do with It?
Click to expand...
Click to collapse
Try to enter to edl mode , push on the two volume buttons together and connect it to the PC , and look on the driver manager for 9008 driver
And use this guide
Mod edit: 4pda link removed since they are prohibited on XDA. Badger50 Senior Moderator
eliran0216 said:
Try to enter to edl mode , push on the two volume buttons together and connect it to the PC , and look on the driver manager for 9008 driver
And use this guide
Click to expand...
Click to collapse
La carga no funciona, no vibra, la pc no lo reconoce, el pulso vol- y pwr no hace nada. ya no tiene bateria
Mod translation: The charge does not work, it does not vibrate, the pc does not recognize it, the vol- and pwr pulse does nothing. it no longer has a battery
Robro86 said:
What rom did you try to install and what was the way you tried to install it? Does your pc still recognise the device when you plug it in? Fastboot or bootloader still availible?
Click to expand...
Click to collapse
global Rom without twrp, does not recognize pc, does not fastboot
Try to connect to the PC , and push on power + vol up for a minute
Or push power + volume down for a minute
And look if it help , if not help push on all the buttons for a minute
Thanks, i think this device is dead. Could i try edl cable?
Try another cable , maybe is not too good for bringing the device for life
eliran0216 said:
Try another cable , maybe is not too good for bringing the device for life
Click to expand...
Click to collapse
Not work
Did you try to push on power + two volume buttons for a minute (while the pone connected to the PC)?
Yes and do nothing
Try to hold all the buttons before you connected it to the PC and then connect it to the computer
No answer
Related
I recently tried to flash a .kdz file on my g pro (e988) ,accidentally i removed my phone from pc while it was in download mode then removed battery also,so after that i reconnected to pc but no download mode no recovery mode,no fastboot no adb,no LG logo atleast,soft buttons led lights for 2-3 seconds and off.
https://www.youtube.com/watch?v=Np9LRCN2Hrg
Download mode press volume up+down together than plug usb. Use CSE flash on LG Flash Tool.
wesly.btm said:
Download mode press volume up+down together than plug usb. Use CSE flash on LG Flash Tool.
Click to expand...
Click to collapse
i do it but i have nothing and when i connect my phone to pc my device manger show my phone qhsusb_dload
Have you installed all driver?
wesly.btm said:
Have you installed all driver?
Click to expand...
Click to collapse
yes i did bro
try this link it may works. http://tech2mech.com/how-to-flash-kdz-lg-f240-f180-f160-lg-g-pro/
i try this method my problems Fix.
wesly.btm said:
try this link it may works. http://tech2mech.com/how-to-flash-kdz-lg-f240-f180-f160-lg-g-pro/
i try this method my problems Fix.
Click to expand...
Click to collapse
thanks bro 4 ur help but i true it but it stop in %4 and get error
qhsusb_dload means you´re in qualcomm mode, and also means that you´ve killed phone boot. from what I know, only medusa and riff boxes can fix it.
My device is UB and rooted.
It's disturbing me that I cannot enter in fastboot via power on / volume + / plug USB cable, it has absolutely no effect, the rom loads.
However, I can enter in fastboot via adb command or with APM+ xposed module from lollipop.
It's disturbing me very much because if one day my device is soft bricked, I will not be able to enter in fastboot mode...
Any suggestions, ideas, solutions ??
Thanks in advance.
nreuge said:
My device is UB and rooted.
It's disturbing me that I cannot enter in fastboot via power on / volume + / plug USB cable, it has absolutely no effect, the rom loads.
However, I can enter in fastboot via adb command or with APM+ xposed module from lollipop.
It's disturbing me very much because if one day my device is soft bricked, I will not be able to enter in fastboot mode...
Any suggestions, ideas, solutions ??
Thanks in advance.
Click to expand...
Click to collapse
You shouldn't power it on when connecting it to fastboot. Let it be off, hold volume up and connect to PC. Wait until the blue light and release the volume up
KbaB.BroS said:
You shouldn't power it on when connecting it to fastboot. Let it be off, hold volume up and connect to PC. Wait until the blue light and release the volume up
Click to expand...
Click to collapse
My bad, it works !! No power on !!!
Thnanks
By the way, I've a Z5, not a Z5P, I got the wrong forum, but nevermind...
KbaB.BroS said:
You shouldn't power it on when connecting it to fastboot. Let it be off, hold volume up and connect to PC. Wait until the blue light and release the volume up
Click to expand...
Click to collapse
My bad, it works !! No power on !!!
Thanks
By the way, I've a Z5, not a Z5P, I got the wrong forum, but nevermind...
nreuge said:
My bad, it works !! No power on !!!
Thanks
By the way, I've a Z5, not a Z5P, I got the wrong forum, but nevermind...
Click to expand...
Click to collapse
Some say the P stands for Plus
Hi All
I have a sony Xa1 G 3116 and I flashed stock OS through Flashtool.
Error apperared while flashing. I forgot to note the error.
After that my phone doesn't switch ON or doesn't get into download mode too.
Indicates a red LED when connected to a charger or Laptop.
Someone guide me please.
Note : I have tried Xperia Companion too. It doesn't detect my phone since it can't get into download mode. I have all sony USB drivers installed to my lap too.
Kiddo_m said:
Hi All
I have a sony Xa1 G 3116 and I flashed stock OS through Flashtool.
Error apperared while flashing. I forgot to note the error.
After that my phone doesn't switch ON or doesn't get into download mode too.
Indicates a red LED when connected to a charger or Laptop.
Someone guide me please.
Note : I have tried Xperia Companion too. It doesn't detect my phone since it can't get into download mode. I have all sony USB drivers installed to my lap too.
Click to expand...
Click to collapse
Try to reconnect phone connecting to your lap with an USB, and than booting it long pressing up and down volume buttons at the same time and boot button, until your phone is detected by Xperia Companion or ADB.
Should work!:highfive:
faby GT said:
Try to reconnect phone connecting to your lap with an USB, and than booting it long pressing up and down volume buttons at the same time and boot button, until your phone is detected by Xperia Companion or ADB.
Should work!:highfive:
Click to expand...
Click to collapse
Will try bro !
faby GT said:
Try to reconnect phone connecting to your lap with an USB, and than booting it long pressing up and down volume buttons at the same time and boot button, until your phone is detected by Xperia Companion or ADB.
Should work!:highfive:
Click to expand...
Click to collapse
Doesn't work bro.
I tried holding down the key for atmost 3 mins. Nothing happens.
While connecting it with PC , it gets disconnected automatically and again connnects and holds barely for about 3 secs.
What to do now ?
Kiddo_m said:
Doesn't work bro.
I tried holding down the key for atmost 3 mins. Nothing happens.
While connecting it with PC , it gets disconnected automatically and again connnects and holds barely for about 3 secs.
What to do now ?
Click to expand...
Click to collapse
Did you release keys when it gets connected with PC?
If yes, do the same thing holding or only volume down button + power or volume up + power, with same modality.
Tell me if it works :highfive:
faby GT said:
Did you release keys when it gets connected with PC?
If yes, do the same thing holding or only volume down button + power or volume up + power, with same modality.
Tell me if it works :highfive:
Click to expand...
Click to collapse
No bro. It didn't work. Tried every combinations , utter waster.
Kiddo_m said:
No bro. It didn't work. Tried every combinations , utter waster.
Click to expand...
Click to collapse
So let's start with CMD:
- Try to connect phone and run CMD as administrator and type: adb reboot recovery
[If it doesn't work]
- adb shell svc power reboot recovery
This should work! (I'm searching for other ones)
:highfive:
BONUS: if It doesn't work, search for "USB jig" on eBay or Amazon, it will put your device into "download mode" :good:
I have the same problem
I will try and reply
I have the same problem
Please reply if you have done
Today I Bricked My LG820Qm
I was updating my Lg g8 using LG UP, When the Process on 64% my PC power off
After that my phone stuck in Qualcomm HS-USM QDLoader 9008
Any solution to come out from this mode to Downloaded Mode so that i can update using LG up.
I was updating G820QM10i_00_NAO_US_OP_0401 to G820QM20b_00_NAO_US_OP_1224
My LG up LGUP_Lab_Frame_Ver_1_16_0_3
Can you try to switch to download mode by press&hold VOL+ while inserting the USB cable (connected to PC). Phone needs to be off while doing so.
tron1 said:
Can you try to switch to download mode by press&hold VOL+ while inserting the USB cable (connected to PC). Phone needs to be off while doing so.
Click to expand...
Click to collapse
I tried not working
If i press&hold VOL+ while inserting the USB cable still my phone come with Qualcomm HS-USB Mode
thanks for your reply
What happens if you press&hold VOL- (furing the whole procedure) push the power button until the phone vibrates, release the button und press&hold the power button?
tron1 said:
What happens if you press&hold VOL- (furing the whole procedure) push the power button until the phone vibrates, release the button und press&hold the power button?
Click to expand...
Click to collapse
Which ever combination, Vol- + power phone power of
with in sec it boot to Qualcomm mode
I don't know where to ask so I'm gonna try here. My G820N is stuck on Android 10 beta. Whenever I flash an official kdz, it only allows for emergency calls. Can't do anything. Any help would be appreciated
Following, in right here with ya.
atsuisofu said:
Following, in right here with ya.
Click to expand...
Click to collapse
Try entering download mode with phone disconnected from USB cable.
Also try to see if it gets recognized by LG-UP or by LG Bridge. These 2 softwares don't need download mode to be able to flash, just the phone to be recognized on some PORT.
Try also factory reset hard menu. Also try switching between Slot A and Slot B. There is also this backup method. Phone is not dead on one of those slots.
If nothing works (but slot a slot b should 100% work) , wait for the firehose, it's just around the corner. That will restore the phone back 100%.
For more info search v50thinq on telegram app. :good:
I can t get to download as it freezes and without the USB cable it doesn't even try and enter. I appreciate the recommendations. I was thinking of the a/b seit hbut without the use of fastboot I am at a loss of how to switch between the two as I thought the system chose and the switch happened upon rebooting once a system had been selected ie as in turning the unit off after loading the os set a flag to go to the opposite system upon completing the inftframs and boot sequence.
vikramanananda said:
Which ever combination, Vol- + power phone power of
with in sec it boot to Qualcomm mode
Click to expand...
Click to collapse
Hi, i'm facing the same problem today, my QM will not go into any mode other than the Qualcomm mode. Were you able to recover your phone finally ?
vikramanananda said:
Which ever combination, Vol- + power phone power of
with in sec it boot to Qualcomm mode
Click to expand...
Click to collapse
did you ever get it fixed. im having the same problem.
johnnycm77 said:
did you ever get it fixed. im having the same problem.
Click to expand...
Click to collapse
me too, do you fix it?
vikramanananda said:
Today I Bricked My LG820Qm
I was updating my Lg g8 using LG UP, When the Process on 64% my PC power off
After that my phone stuck in Qualcomm HS-USM QDLoader 9008
Any solution to come out from this mode to Downloaded Mode so that i can update using LG up.
I was updating G820QM10i_00_NAO_US_OP_0401 to G820QM20b_00_NAO_US_OP_1224
My LG up LGUP_Lab_Frame_Ver_1_16_0_3
Click to expand...
Click to collapse
So, if the device, as you say, lost power during an update like that, then almost assuredly you have at least one, if not numerous corrupted partitions.
And, it's specific partitions on the device that allow it to enter download mode. One of these most know about or have heard of is the laf partition. But other have to be there also for it to work, I don't remember exactly what the others off the top of my head, but that info is easily found.
The key thing you need (or any others commenting same prob), is to be able to enter EDL mode and have qfil installed and recognizing the device. If you can get that far, it would be easy to find the correct partitions you could flash with qfil and then immediately go from qfil to download mode.
Many many people have done this. Just get qfil set up (see guides section) and get the device recognized. that takes some effort but it's def doable.
I do not know in depth about all this stuff, I've just been thrown into it because my phone decided to brick itself in a system update after it got into my hands. I updated it and it went into crash dump, a few times, the just nonstop boot looped with the oneplus logo on, and some pixels bugging, then it stopped showing the oneplus logo all together and just boot loops, I can go into fast boot and nothing else, if I restart bootloader it now goes to a charge menu and rarely actually restarts fast boot, I just tried msm and I've tried booting into twrp but it wont work, i believe this is because the phone wont connect to my pc properly but i have tried universal adb drivers, new sdk, and official QUALCOMM ones to all get the same result of appearing in device manager as just andrioud and nothing else with no options for drivers, on msm it would show up but it wouldn't get past waiting for device. also i cant find a proper twrp rom for the 9 pro on here, atleast the stock one, nor can i find it anywhere else, i can only find the img. also i feel I'm missing something with flashing on the fastboot and am not seeing if I'm supposed to be doing something (of the limited things i can do) on the phone, or its all in commands and stuff on here. sorry this is horribly written, I'm tired and stressed because of this.
Search stock rom and download
unzip rom ,connect your phone in download mode and flash STOCK ROM.
DaNyaWa said:
Search stock rom and download
unzip rom ,connect your phone in download mode and flash STOCK ROM.
Click to expand...
Click to collapse
what is download mode
Shaggers said:
I do not know in depth about all this stuff, I've just been thrown into it because my phone decided to brick itself in a system update after it got into my hands. I updated it and it went into crash dump, a few times, the just nonstop boot looped with the oneplus logo on, and some pixels bugging, then it stopped showing the oneplus logo all together and just boot loops, I can go into fast boot and nothing else, if I restart bootloader it now goes to a charge menu and rarely actually restarts fast boot, I just tried msm and I've tried booting into twrp but it wont work, i believe this is because the phone wont connect to my pc properly but i have tried universal adb drivers, new sdk, and official QUALCOMM ones to all get the same result of appearing in device manager as just andrioud and nothing else with no options for drivers, on msm it would show up but it wouldn't get past waiting for device. also i cant find a proper twrp rom for the 9 pro on here, atleast the stock one, nor can i find it anywhere else, i can only find the img. also i feel I'm missing something with flashing on the fastboot and am not seeing if I'm supposed to be doing something (of the limited things i can do) on the phone, or its all in commands and stuff on here. sorry this is horribly written, I'm tired and stressed because of this.
Click to expand...
Click to collapse
I suggest to try the MSM tool again.
MSM tool for OP9pro you can find here : MSM tool OP9pro
More guides how to use it find here : MSM guide
Shaggers said:
what is download mode
Click to expand...
Click to collapse
You shod download "EDL" tool (even called MSN)
unzip and exetute ad admin (read specifications and troubleshooting in the related thread)
ensure tour phone is off
press and keep both volume buttons while connecting it to PC
then the COM X connection should become "green + connected"
go with "start" and just wait the processo to end
Shaggers said:
what is download mode
Click to expand...
Click to collapse
Volume up+power
DaNyaWa said:
Volume up+power
Click to expand...
Click to collapse
Download mode is not vol up + power, that's bootloader
EDL (Download mode) is both vol buttons + power
It should show up in the device manager on the computer as a Qualcomm device if it's worked correctly.
djsubterrain said:
Download mode is not vol up + power, that's bootloader
EDL (Download mode) is both vol buttons + power
It should show up in the device manager on the computer as a Qualcomm device if it's worked correctly.
Click to expand...
Click to collapse
EDL mode is NOT both Volume buttons + Power, it's just HOLDING BOTH THE VOLUME BUTTONS and WHILE HOLDING THE VOLUME BUTTONS, CONNECT THE USB CABLE. The phone needs to be in a switched OFF state before doing this.
By holding both volume buttons and the power button, you will force restart your phone into bootloader mode (fastboot mode).
And VOLUME UP + POWER BUTTON is recovery mode.
djsubterrain said:
Download mode is not vol up + power, that's bootloader
EDL (Download mode) is both vol buttons + power
It should show up in the device manager on the computer as a Qualcomm device if it's worked correctly.
Click to expand...
Click to collapse
Sory ok
Powerup+powerdown
DaNyaWa said:
Sory ok
Powerup+powerdown
Click to expand...
Click to collapse
Power up + power down?