Question [SOLVED]Mi 11 lte 5g ne bricked(?) - Xiaomi 11 Lite 5G NE

after an unsuccessful firmware of my device, it started to boot constantly in fastboot mode. when I try to restore via miflash and xiaomi tool v2, I get the error "Flash super error". how to solve this problem?
P.S. : sorry if something is written incorrectly, I wrote through a translator

Hi,
did you look at this topic ?

newbie_or_not_newbie said:
Hi,
did you look at this topic ?
Click to expand...
Click to collapse
yes, they advised me to install the xiaomi.eu firmware, but I get the error of flashing the partition (?) "super"
Sending sparse 'super' 1/9 (729624 KB) OKAY [ 16.439s]
Writing 'super' FAILED (remote: 'failed to check sparse crc')
fastboot: error: Command failed
******** Did you mean to fastboot format this ext4 partition?
Erasing 'metadata' FAILED (remote: 'failed to check sparse crc')
fastboot: error: Command failed

try to delete shares and data from adb fastboot
fastboot erase recovery
fastboot erase system –w
fastboot erase boot
fastboot erase system
fastboot erase data
fastboot erase cache
then flash the rom

WaldoVM said:
try to delete shares and data from adb fastboot
fastboot erase recovery
fastboot erase system –w
fastboot erase boot
fastboot erase system
fastboot erase data
fastboot erase cache
then flash the rom
Click to expand...
Click to collapse
thats work!!
thanks bro

Related

[q] [rom issue][fastboot][arc s]

Hi All,
Trying to install the ICS beta on my Arc S using fastboot and the three .img.
I have to use these commands:
fastboot.exe -i 0x0fce flash system system.img - works fine,
fastboot.exe -i 0x0fce flash bot boot.img - works fine
fastboot.exe -i 0x0fce flash userdata userdata.img - returns:
"C:\Program Files\Android\android-sdk\platform-tools>fastboot.exe -i 0x0fce flash
userdata XICS\userdata.img
sending 'userdata' (198 KB)...
(bootloader) USB download speed was 101376kB/s
OKAY [ 0.038s]
writing 'userdata'...
(bootloader) Flash of partition 'userdata' requested
FAILED (remote: Partition not found)
finished. total time: 0.073s".
http://developer.sonymobile.com/wp/...e-for-unlocked-2011-xperia-smartphone-models/
http://forum.xda-developers.com/showthread.php?t=1513172&highlight=userdata+img&page=9
I feel I'm this close to saving my bricked phone, can someone help me out here I'm clueless.. wheres the partition gone? Do I need to wipe it with CWM or something?
Much pre-emptive gratitude!
Fixed! Ignore noobish error..
Sent from my LT18i using XDA
mynameisnafe said:
Hi All,
Trying to install the ICS beta on my Arc S using fastboot and the three .img.
I have to use these commands:
fastboot.exe -i 0x0fce flash system system.img - works fine,
fastboot.exe -i 0x0fce flash bot boot.img - works fine
fastboot.exe -i 0x0fce flash userdata userdata.img - returns:
"C:\Program Files\Android\android-sdk\platform-tools>fastboot.exe -i 0x0fce flash
userdata XICS\userdata.img
sending 'userdata' (198 KB)...
(bootloader) USB download speed was 101376kB/s
OKAY [ 0.038s]
writing 'userdata'...
(bootloader) Flash of partition 'userdata' requested
FAILED (remote: Partition not found)
finished. total time: 0.073s".
http://developer.sonymobile.com/wp/...e-for-unlocked-2011-xperia-smartphone-models/
http://forum.xda-developers.com/showthread.php?t=1513172&highlight=userdata+img&page=9
I feel I'm this close to saving my bricked phone, can someone help me out here I'm clueless.. wheres the partition gone? Do I need to wipe it with CWM or something?
Much pre-emptive gratitude!
Click to expand...
Click to collapse
Hi there, I am having the same issue and can't fix it. userdata partition not found. I cant receive texts because there is no place to save them or install apps. Im desparate. Do you know how to fix this issue. Create a new userdata partition?
Can you email me at [email protected] as I am new here and dont know if I will find this thread again.
Flash the stock Rom, THEN flash over the ice beta.. Except use flash tool to flash the official ICS.. Do a forum search and you'll find it.
Sent from my LT18i using XDA

Fastboot failing

Running fastboot on my HOX and getting this result:
Code:
C:\Users\Michael\Documents\Handheld\Android\fastboot>fastboot format system
formatting 'system' partition...
FAILED (remote: unknown command)
FAILED (remote: unknown command)
finished. total time: 0.143s
Same happens with data and userdata.
Terrarist said:
Running fastboot on my HOX and getting this result:
Code:
C:\Users\Michael\Documents\Handheld\Android\fastboot>fastboot format system
formatting 'system' partition...
FAILED (remote: unknown command)
FAILED (remote: unknown command)
finished. total time: 0.143s
Same happens with data and userdata.
Click to expand...
Click to collapse
Ofcorse will fail no comanf fastboot format system only fastboot flash recovery recovery.img and for the boot fastboot flash boot boot.img, fastboot erase cache and some minnor commands if you want to format system do it from custom recovery
Thant said:
Ofcorse will fail no comanf fastboot format system only fastboot flash recovery recovery.img and for the boot fastboot flash boot boot.img, fastboot erase cache and some minnor commands if you want to format system do it from custom recovery
Click to expand...
Click to collapse
This is a big problem. I've got the burnt out IC that blacks out the screen so unless I connect to a monitor I can't see anything. And I have a working MHL cable but it doesn't work in recovery or bootloader mode. Sweating profusely now

Android 10 - How to erase system with fastboot?

The Android 9 command isn't working in 10:
Code:
C:\android>fastboot erase system_a
Erasing 'system_a'
fastboot: error: Command failed
I also tried without specifying A or B.
Same error.
Not sure what you are trying to do that a flash-all wouldn't accomplish, but how about 'fastboot erase userdata'?
Prob gotta be in fastboot'd you gotta be to flash system sorta how the factory Images does it be nice to now how or the commands
If you erase the system partitions the phone will be unbootable until you flash a new factory image. Flashing a new factory image (WITH the -w intact), will erase the phone and return to factory. Just make sure you remove all of your Google accounts before you do.

The System has been destroyed - only fastboot possible

Hello,
I bricked my Redmi Note 8T and I have no idea how to save my phone!
What did I do?
I unlocked my phone with XiaomiTool V2 and added Magisk, installed TWRP and trieed to add LineageOS.
So I tried to restart but the system stocked in a "boot - shutdown - boot - shutdown..."
I read in a description, that I have to delete in TWRP-mode some folders in WIPE so I deleted "System", "Data", "Cache", and maybe some other folders! I'm so stupid!
So there is only "The System has been destroyed", after around 30 seconds the system starts again and the bad massage comes again...
It is just possible to start the fastboot mode!
So I tried again to flash and boot TWRP:
sudo fastboot flash recovery twrp.img
target reported max download size of 804274176 bytes
sending 'recovery' (65536 KB)...
OKAY [ 1.617s]
writing 'recovery'...
OKAY [ 0.349s]
finished. total time: 1.967s
sudo fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 1.615s]
booting...
FAILED (status read failed (No such device))
finished. total time: 37.120s
Afterwards the system says again "The System has been destroyed".
So now I don't have any idea to save my phone!
Please help me! I trust in you!
My OS on the PC is Ubuntu for your information...
Best wishes
De Blasmuskant
Blasmuskant said:
Hello,
I bricked my Redmi Note 8T and I have no idea how to save my phone!
What did I do?
I unlocked my phone with XiaomiTool V2 and added Magisk, installed TWRP and trieed to add LineageOS.
So I tried to restart but the system stocked in a "boot - shutdown - boot - shutdown..."
I read in a description, that I have to delete in TWRP-mode some folders in WIPE so I deleted "System", "Data", "Cache", and maybe some other folders! I'm so stupid!
So there is only "The System has been destroyed", after around 30 seconds the system starts again and the bad massage comes again...
It is just possible to start the fastboot mode!
So I tried again to flash and boot TWRP:
sudo fastboot flash recovery twrp.img
target reported max download size of 804274176 bytes
sending 'recovery' (65536 KB)...
OKAY [ 1.617s]
writing 'recovery'...
OKAY [ 0.349s]
finished. total time: 1.967s
sudo fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 1.615s]
booting...
FAILED (status read failed (No such device))
finished. total time: 37.120s
Afterwards the system says again "The System has been destroyed".
So now I don't have any idea to save my phone!
Please help me! I trust in you!
My OS on the PC is Ubuntu for your information...
Best wishes
De Blasmuskant
Click to expand...
Click to collapse
Doesn't sound so bad. And of you had searched the forum before panic posting, you would have easily found at least 3 similar threads already started.
Not knowing what you had wiped from twrp before, leaves the best option for you is to flash the factory fastboot ROM, and then start over.
There is a thread here about fastboot ROM i beleive.
just miflash
Blasmuskant said:
Afterwards the system says again "The System has been destroyed".
So now I don't have any idea to save my phone!
Please help me! I trust in you!
My OS on the PC is Ubuntu for your information...
Best wishes
De Blasmuskant
Click to expand...
Click to collapse
in fastboot rom there must be a file vbmeta.img....if you don't want to download the fastboot rom then download vbmeta.img from here or here..
then download latest platform tools.
extract the plaform tools zip...copy vbmeta.img in this folder,open cmd/terminal in this folder path and flash vbmeta with phone in fastboot mode by this command:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
after this flash recovery.
Thank you for your fast answers! I tried already the search function but it seemed to me beeing different problems!
wsdyleon said:
just miflash
Click to expand...
Click to collapse
How can I do it in fastboot mode with Linux?
the_weird_aquarian said:
in fastboot rom there must be a file vbmeta.img....if you don't want to download the fastboot rom then download vbmeta.img from ...
then download ...
extract the plaform tools zip...copy vbmeta.img in this folder,open cmd/terminal in this folder path and flash vbmeta with phone in fastboot mode by this command:
Code:
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
after this flash recovery.
Click to expand...
Click to collapse
I tried it with the vbmeta.img from the fastboot Redmi Note 8 – Global Stable ROM (V11.0.9.0.PCOMIXM | MIUI 11 | Android 9.0) and the platform-tools for linux from xiaomifirmware.com.
sudo fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
< waiting for any device >
On the phone then is "Press any key to shutdown"
After trying again I got:
target didn't report max-download-size
sending 'vbmeta' (4 KB)...
But then nothing happens...
What is wrong?
Blasmuskant said:
I tried it with the vbmeta.img from the fastboot Redmi Note 8 – Global Stable ROM (V11.0.9.0.PCOMIXM | MIUI 11 | Android 9.0) and the platform-tools for linux from xiaomifirmware.com.
sudo fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
< waiting for any device >
On the phone then is "Press any key to shutdown"
After trying again I got:
target didn't report max-download-size
sending 'vbmeta' (4 KB)...
But then nothing happens...
What is wrong?
Click to expand...
Click to collapse
Was your phone connected in fastboot?
the_weird_aquarian said:
Was your phone connected in fastboot?
Click to expand...
Click to collapse
Yes, it has been connected in fastboot mode... I pressed "Power-On" and "Volume-Down" before and on screen it says FASTBOOT...
Blasmuskant said:
Yes, it has been connected in fastboot mode... I pressed "Power-On" and "Volume-Down" before and on screen it says FASTBOOT...
Click to expand...
Click to collapse
Is it working now? Why don't you try flashing the stock firmware again?
Blasmuskant said:
Yes, it has been connected in fastboot mode... I pressed "Power-On" and "Volume-Down" before and on screen it says FASTBOOT...
Click to expand...
Click to collapse
Download the latest platform tools and try again once
It works!
[email protected] said:
Is it working now? Why don't you try flashing the stock firmware again?
Click to expand...
Click to collapse
It worked, I installed the Stock recovery and then TWRP (all with fastboot) and so it was possible for me to install LineageOS!
Thank you very much for your support!

Problem with flashing bootlogo

I have a problem with flashing bootlogo via fastboot. after
Code:
fastboot flash logo logo.bin
it show me
Code:
Sending 'logo__a' (3283 KB) OKAY [ 0.088s]
Writing 'logo__a' (bootloader) Invalid partition name logo__a
FAILED (remote: '')
fastboot: error: Command failed
I supposed that there is something with a/b partitioning, but how to correct flash bootlogo?
forgottennick said:
I have a problem with flashing bootlogo via fastboot. after
Code:
fastboot flash logo logo.bin
it show me
Code:
Sending 'logo__a' (3283 KB) OKAY [ 0.088s]
Writing 'logo__a' (bootloader) Invalid partition name logo__a
FAILED (remote: '')
fastboot: error: Command failed
I supposed that there is something with a/b partitioning, but how to correct flash bootlogo?
Click to expand...
Click to collapse
Bootloader is unlocked?
Could try
Code:
fastboot flash logo_b logo.bin
If that work
Switch slots
Code:
fastboot --set-active=b
And flash other side
Code:
fastboot flash logo_a logo.bin
Then switch back
Code:
fastboot --set-active=a
Sent from my Moto E (4) using Tapatalk
Yes, bootloader unlocked/twrp/magisk, active slot A, stock 8.0
it is correctly sequence?
Code:
fastboot flash logo_b logo.bin
fastboot --set-active=b
fastboot flash logo_a logo.bin
fastboot --set-active=a
forgottennick said:
Yes, bootloader unlocked/twrp/magisk, active slot A, stock 8.0
it is correctly sequence?
Click to expand...
Click to collapse
Yes if current active is slot _a
Code:
fastboot getvar current-slot
Sent from my payton_sprout using XDA Labs

Categories

Resources