Hi, recently i got in a bootloop. I was at the beach, taking pictures with Gcam, and suddenly the phone started locking and unlocking the screen, and after some time it rebooted with a "android" screen. It showed a warning saying my android was corrupted, and gave me the option to try again or factory reset.
I clicked "Try Again" and the phone tryed to reboot, and it is in a boot loop since then. I can start it in fastboot mode, but the device won't be seen by Rescue and Smart Assistant, or by ADB. Yes, i have the USB drivers installed. When i try to enter recovery mode it says "no command", and factory mode just starts the bootloop again. Please someone help me
Managed to get past no command screen, and dida factory reset.
Related
So, it's been a fun couple of days.
I was 'tabling' away, as usual, and my tablet suddenly reboots (if it matters, I was just opening FPSE, as I'd done dozens of times before; Skype was on background; every other process was finished). 'Ok', I thought, 'that's weird'. When the tablet's done rebooting, the lockscreen shows up, and when I try to unlock it, the scren just freezes. Couldn't turn off the screen, nothing. So, I force a shutdown by pressing the power button.
When I try to turn it on again, it just stays stuck at the Google logo screen. I tried going in through recovery, but the result is the same. Select recovery, Google logo shows up, little android with exclamation point doesn't.
I tried formating through fastboot -w, but the process just keeps endlessly deleting, while doing nothing at all. I have to quit command line, shut down tablet or unplug the USB cable with a command line message showing up (I once left it while I went for a coffee; two hours of deleting nothing at all). Same thing with trying to unlock bootloader to maybe going to recovery after flahsing a custom recovery.
I don't mind losing everything I had. All pictures are recuperable and the rest is either in the cloud or in my phone/PC. The most annoying thing would be to set up the whole thing again, wich is no trouble at all (that and going through PvZ2 and TD Bloons 5 from the start :crying: ).
I was using Android 4.4 (KRT16S), everything stock.
Is it bricked, soft-bricked, did the aliens get it? I am e-mailing with someone from the store I bought it from, hoping for a solution or (worst case scenario) RMA, but I would rather solve this without having to.
Try flashing system.img, recovery.img, and boot.img, by hand.
Your emmc likely got corrupted
How do I do that with a locked bootloader and no access to recovery? Is it possible?
Hello,
I seem to have really messed up my G3 and after days of research I have not been able to get anywhere with it. I've read posts of people having similar issues, but their solutions do not seem to work for me.
What I tried to do is flash the ROM, starting with TWRP. After installing TWRP and rebooting I was getting the "no command" message on the screen. I believe (this was days ago), I used ADB to remove laf and reboot the phone (for some reason I could not back it up). The phone rebooted in fastboot and it has been downhill from there.
No download mode. When normally started the phone just hangs on the LG logo. Vol- and power gets me to the "Factory data reset", but if I do that, it flashes "erasing" for a second and it goes back to the LG logo screen.
I can get to fastboot, however, any command that I enter in CMD or Linux terminal just shows up on the phone's screen and it does not do anything. Fastboot devices shows the device as "????????" in Linux and as "?" in Windows. I have tried multiple drivers for Windows.
I tried BoardDiag (3 or 4 different versions running as admin) and shorting the pins, but any time I try to run the checks, I get an error - "No response from device" or "Device was not found in dload trying flash programmer"
I also tried SmartBootDiag, but once it detects the phone, it does its checks and it disconnects the device, without giving me an option to flash anything. Looking at the logs, it does not find any anti-rollback issues.
Any suggestions would be greatly appreciated as I am not sure what else to try.......
Thank you.
Anyone??
I enrolled in the Beta Program, and upgraded to Android O. Everything was great! Until I rebooted, things were acting funny. I have played with enough nightly builds and custom roms to realize, I need to factory Reset.
Bootloop.
I was able to get into the recovery mode: and then did another factory reset from here--
Now my recovery mode is only, "No Command" Vol up + power did not get me a list of options again
So, I followed this guide: https://forum.xda-developers.com/nexus-5x/help/guide-fix-bootloop-locked-bootloader-t3608679
I got here: "click on all buttons and flash all partition files from extracted archive - except recovery ,userdata and cache."
And still was boot looping
So, I went to this guide: https://forum.xda-developers.com/nexus-5x/help/req-help-to-unbrick-t3251740
Installing the "LGUP_8994_DLL_Ver_0_0_3_23" Looks rather uneventful.
But, I booted up with Vol UP+Power
and got to the Firmware Update screen.
It's been sitting at 0% for twenty minutes... "Do not unplug the USB connection until the process is completed"
and "LG USB driver installation is needed before starting LGUP"
and I will need to close my laptop in an hour
Im lost
Edit:
Okay, I got the LGUP to install a new TOT file--
LGH791 - resulted in freezing on "google" after reboot
LGH790 - also frozen on "google" after reboot
However, my recovery mode is no longer "No Command"
So I'm going to try to Sideload an update
I Has an operating system! I'm going to update my firmware to 791 now
hmm.. .no option for "BIN" so I'm going to leave it-- i was supposed to go an hour ago
[Follow-up] My sensors were "malfunctioning" with LGH790. Upgrading to LGH791 fixed all of my sensor issues.
Hi, yesterday a friend of mine gave me a nexus 5x with the bootloop of the dead issue, I charged the battery 100% and then started to play a little bit. I managed to get into recovery mode and tried a data/cache wipe, the issue was obviously still there, the thing is when I went to recovery mode, one of the options is "Apply Update from ADB". I went into that mode by mistake, withouth having the phone connected to the PC and now it won't start, not even with the Recovery mode command (voulme+power key). Is there a way to reactivate the recovery mode? The phone is unresponsive to any key combination. Thanks!
@nemesys660: to be sure, Power+VolUp doesn't work. Power+VolDown offers the base menu of bootloader. If you cannot start this way: does system boot (sometimes)?
I unlocked bootloader and wanted to install Magisk with TWRP but it kept giving me Error 1 saying "boot image patched by unsupported programs, please restore stock boot image" so I searched for the boot.img, transfered to internal device of the phone and flash it but I didn't do wipe data and now my phone is stuck in "your device has been unlocked and can't be trusted" message. I tried powering off by pressing the power off button, it goes on black screen for a couple of seconds then gets back to the same message screen, same with trying to enter into recovery mode by pressing power and volumen down button, comes back and gets stuck in the same screen, I tried connecting to pc with usb but doesn't recognize it. I dont know what to do please help me