Hi everyone,
I try to upgrade my stock img (EUI 5.5.013S) on LeTV x800 CN to newer version.
I flashed TWRP 3.2.3 recovery img and it runs fine - I am able to boot to recovery and flash img I choose.
I tried flashing img from this thread: https://forum.xda-developers.com/le.../cm-14-1-android-7-1-unofficial-letv-t3530173 (version X800_CN_RR585CLEAN_11NOV17-02)
However after flashing I am stucked on fastboot (penguin sign).
I tried it couple times but without any luck.
So I restored backup copy of my stock img and decided to try offcial upgrade to 5.9.028S.
I downloaded the *.zip file (1523510744_X1_X800-CN-FN-BEXCNFN5902803208S-5.9.028S.zip) and opened it in file manager.
Phone rebooted into recovery (which now is TWRP) and TWRP finished flashing new img.
However after flashing I am stucked on fastboot (penguin sign) again.
I feel like I am doing something wrong - can somebody give me some advice ?
Also I do not have original stock recovery img as I did overwrite it with TWRP - could someone please share it with me?
It seems that we cannot jump directly from 13S Stock ROM (final Lollipop) to 28S Stock ROM (Marshmallow) or RR/ABM30 (Nougat). You may have to install firstly some other MM stock ROM, for example - 18S, 20S or 26S...
So, after full wipe (without Internal Storage!) in TWRP: (1) install e.g. 26S Stock ROM, (2) make full wipe (without Internal Storage!), (3) install RR/ABM30 ROM (or 28S), Open GApps and (if you want) Magisk/SuperSU, and (4) firstly Reboot in Recovery (TWRP), after that Reboot in System...
Don't forget to clean Dalvik/Cache after each zip installation! And Install ROM without Sim Card...
Thank you, I'll try that and post how it went.
Alright,
I tried LeGi0NeeR suggestion to first flash lower version of Marshmallow stock ROM and try flashing go-to img - It worked!
More specific info:
1. I used EUI 5.5.020S and updated it by clicking update in File manager.
phone did reboot and went into (before-flashed) TWRP recovery where it finished the installation.
2. phone successfully booted to OS (took couple of minutes due to first time boot and apps optimization)
3. I took EUI 5.5.028S and repeated the process.
Warning
• Chinese firmware will include Chinese-only software.
This means if you don't know Chinese, you may have a hard time using your phone.
The apps are designed to work on China, so they might not work at all.
The initial installation will include severe bloatware.
The installation will not include Google Play Services.
Preinstallation
• Make a backup.
• Use a stable computer.
Requirements
• ADB, Fastboot, HiSuite
• Huawei P20 lite on EMUI, unlocked bootloader
• Stock firmware of your actual model (ex. ANE-LX1 C432)
• Stock firmware of ANE-AL00
• HuRUpdater
Links will be in the second post.
Main Installation
Flashing Chinese Oeminfo
1. Do a factory reset.
2. Flash kilroystyx's TWRP (via fastboot)
3. Boot to TWRP and backup current Oeminfo partition.
Copy it to your computer, right away.
4. Flash the ANE-AL00 Oeminfo (Install > Flash Image > Select Image > Oeminfo).
Installing the new firmware
Make a new folder, put the ANE-AL00 firmware files and HuRUpdater at that folder.
Flash the HuRUpdater ZIP file and reboot.
After the phone boots, flash kilroystyx's TWRP again.
Flash HuRUpdater again (if the files are gone, just copy them again).
Reboot.
Additional features
Installing Google Play Services
Make sure you have stock recovery before starting.
Install GMS Installer just after the first boot.
Let it install and reboot.
Install the Google Apps linked below.
Reboot.
Rooting
Extract the UPDATE.APP from the update.zip
Extract RAMDISK.img via Huawei Update Extractor
Copy to phone
Install Magisk Manager and launch it
Enable Preserve DM Verity
Touch Install and select Patch...
Choose your ramdisk
Flash the patched_boot.img to your ramdisk via fastboot
ANE-AL00 Oeminfo
GMS Installer
Google Account Manager, Google Calendar Sync, Google Contacts Sync, Google Play Store, and Google Services Framework can be found online (ex. APKMirror).
kilryostyx's TWRP
Stock ANE-LX1 files
Stock ANE-AL00 files (click the first "filelist")
Huawei Update Extractor
HuRUpdater
Could you please tell with video
Letzen said:
Warning
• Chinese firmware will include Chinese-only software.
This means if you don't know Chinese, you may have a hard time using your phone.
The apps are designed to work on China, so they might not work at all.
The initial installation will include severe bloatware.
The installation will not include Google Play Services.
Preinstallation
• Make a backup.
• Use a stable computer.
Requirements
• ADB, Fastboot, HiSuite
• Huawei P20 lite on EMUI, unlocked bootloader
• Stock firmware of your actual model (ex. ANE-LX1 C432)
• Stock firmware of ANE-AL00
• HuRUpdater
Links will be in the second post.
Main Installation
Flashing Chinese Oeminfo
1. Do a factory reset.
2. Flash kilroystyx's TWRP (via fastboot)
3. Boot to TWRP and backup current Oeminfo partition.
Copy it to your computer, right away.
4. Flash the ANE-AL00 Oeminfo (Install > Flash Image > Select Image > Oeminfo).
Installing the new firmware
Make a new folder, put the ANE-AL00 firmware files and HuRUpdater at that folder.
Flash the HuRUpdater ZIP file and reboot.
After the phone boots, flash kilroystyx's TWRP again.
Flash HuRUpdater again (if the files are gone, just copy them again).
Reboot.
Additional features
Installing Google Play Services
Make sure you have stock recovery before starting.
Install GMS Installer just after the first boot.
Let it install and reboot.
Install the Google Apps linked below.
Reboot.
Rooting
Extract the UPDATE.APP from the update.zip
Extract RAMDISK.img via Huawei Update Extractor
Copy to phone
Install Magisk Manager and launch it
Enable Preserve DM Verity
Touch Install and select Patch...
Choose your ramdisk
Flash the patched_boot.img to your ramdisk via fastboot
Click to expand...
Click to collapse
Could you please tell with video
Could you please tell with video
Could you please tell with video
Could you please tell with video
Could you please tell with video
Could you please tell with video
Could you please tell with video
Hi all,
Have seen a lot of requests for patched boot images on these threads so thought i'd share a guide on how to get it yourself as well as all the files required, plus the patched boot.img if you just want to go ahead and boot/flash it without obtaining one yourself
Please read the process before committing to proceeding, so you know what's required and what you should and shouldn't use!
Stock and patched images are UK/ EU but the guides are universal and could be used on multiple devices.
NOTE:
For these guides the versions used are:
Stable, Canary or BETA depending on firmware, simply change the channel in Magisk settings then select install / update:
11.0.1.1
Magisk Manager - Magisk (Canary) version: 1469b82a (21101)
11.0.2.2
Boot img patched using Magisk (Canary) version: 1469b82a (21101)
11.0.3.3
Boot img patched using Magisk beta 21.4 (21400)
11.0.4.4 (DO NOT UPDATE TO 22.0 YOU WILL BOOTLOOP!
Boot Img patched using Magisk beta
21.4 (21400)
11.0.5.5
Boot img patched using Magisk Stable 22.0 (22000) (18)
11.0.6.6
Boot img patched using Magisk Stable 22.1 (22100)
11.0.7.7
Boot.img patched using Magisk Stable 23.0 (23000) (21)
11.0.8.8
Boot.img patched using Magisk Stable 23.0 (23000) (21)
11.0.9.9
Boot.img patched using Magisk Stable 23.0 (23000) (21)
11.0.10.10
Boot.img patched using Magisk Stable 23.0 (23000) (21)
11.0.11.11
Boot.img patched using Magisk 24
https://forum.xda-developers.com/attachments/11-0-11-11-europe-patched-24303-zip.5566283/
Thanks @tfae
12 11.C.15 EU. Thanks @tfae
1st
Extracting a boot.img using Payload dumper
Pre-requisites
A device with a working version of magisk manager installed, simply change the channel to the version outlined in the list above relevant to your firmware then select install / update:
A Windows 10 computer / laptop
A full update downloaded firmware zip for your model (recommend oxygen updater)
Payload dumper program for Windows.
Process
On your computer
1. Download and copy the PAYLOAD DUMPER folder to your desktop, there will be one folder with 2 files and 2 folders inside.
Download from here: https://mega.nz/folder/vU00FZDa#PIEfjl5w5wonyNAwHW3FBQ
2. Download the firmware of your choice and open it using Winrar or a similar zip program, extract the file called payload.bin to the folder within the payload folder called payload_input.
3. Run the program payload_dumper.exe, a Command prompt will open to show extraction progress (this will extract a bunch of files to the payload_output folder) allow it to completely finish (the CMD window will close automatically)
4. One of the files will be called boot.img, this is the file we'll be patching, copy this to your phone, root of storage which is called /sdcard.
On your phone
5. Open up Magisk and click Install / Update, if you don't see update then change channel, so this by changing the channel in magisk settings, it'll then show the install/ update buttons.
6. Select "Select and Patch a file" it'll open up a file browser, navigate to the boot.img you copied earlier and select it, allow it to complete (this will output a file called "magisk_patched" (which will be in the Downloads folder)
You now have a patched boot.img ready to flash to either slot with fastboot or boot via fastboot, would recommend booting as this is risk free, if it's a bad image for whatever reason and you choose to flash then your phone may bootloop.
NOTE** Some people have noticed that an already patched boot.img when flashed can fail and cause a boot loop when flashed,so if you have downloaded a magisk_patched img from somewhere else then you WILL need to re-patch it on your own device preferably using the afore mentioned magisk manager based on what firmware it's from.
If you intend to follow the guide below with your own patched img then you shouldn't need to patch twice but it won't hurt if you do.
2nd
Upgrading from rooted Android 10 to rooted Android 11
Pre-requisites
A rooted device running Android 10
Canary magisk manager or beta version that works:
Windows 10 computer / laptop
Process
On your phone
1. Disable all Magisk mods
2. Download the Android 11 firmware using Oxygen updater DO NOT INSTALL AUTOMATICALLY, WE NEED TO INSTALL MANUALLY!!!
3. Once downloaded; open settings / system / system updates
4. Click the settings cog and click 'install from local storage'
5. Locate the firmware you downloaded, it's in the root of storage.
6. Click install and allow it to finish, DO NOT CLICK THE REBOOT BUTTON YET!
7. Open Magisk. manager and click "Install / Update"
8. Click "Install to Inactive slot (After OTA) (Once complete, click reboot)
As this is a new base the first boot may take a little longer.
Your phone will now boot with Android 11.0.0 and will have retained root, all your apps will remain as you left them.
Be careful what mods you re-enable as they may not be 11 compatible.
3rd
Update from 11 stable to 11+ stable whilst retaining root
Guide
1. Download the relevant firmware for your device via oxygen updater
2. Open Magisk and remove all the modules you have installed, then reboot
**NOTE- At this point I tend to copy out the whole firmware to my computer, incase I need it in the future, the boot img and patched boot img are at the foot of this guide, I'll always upload the latest firmware as soon as it comes out for the UK/EU model
3. Open up settings / system / system updates , click the cog and select "Local Upgrade" the file should be listed on screen, if not then move the file to the root of your phones storage.
4. Click install and allow it to go through the process
**NOTE- DO NOT REBOOT AT THIS POINT YOU WILL LOSE THE ABILITY TO PATCH ON THE FLY, SIMPLY BACK OUT OF THE SCREEN WHICH SAYS "INSTALLATION COMPLETED. RESTART TO EXPERIENCE NEW FEATURES"
5. Open up magisk and click install (you may see two install buttons, top one is magisk and the bottom is magisk manager, we need the top one)
6. You'll be faced with a screen that has several options, you want to select "Install to Inactive slot (After OTA)" then select "LET'S GO" once complete click reboot.
7. Once your phones booted back up your system / files should all remain as they were and you should have root access.
You can now install all your modules again so long as they're compatible with the firmware you've just updated to.
4th
Rooting using fastboot commands
Method 1
Booting the patched image
1. Obtain a patched boot image for your device variant preferably using payload dumper or download one of mine from the foot of this guide or if you've just performed the above guide you should already have a functional one, copy this file to your fastboot folder on your computer
**NOTE - The above suggested downloads are for the EU / UK variant- if you have another model / firmware please use that instead, If you did not obtain the boot.img from a firmware and patch it yourself, you will need to patch it again in magisk manager to avoid a bootloop, if you still get a bootloop it's best to obtain one yourself using the guide at the top of this post.
2. Reboot your phone to fastboot
and connect to your computer.
3. Boot the magisk patched img
fastboot boot magisk_patched (or name of your patched boot img)
Your phone should now boot automatically, you should now be rooted but we need to make this permanent, if you were to reboot you would lose root.
4. Open magisk manager and click install/update, if you are missing the install/ update buttons, change magisk version to beta in magisk settings and install the update, the buttons should then show.
5. Select Direct install (recommended) then click ok.
6. Allow magisk to permanently root your device then click reboot.
You should now boot and remain rooted.
Method 2
Flashing to both slots
1. Obtain a patched boot img for your device variant or download one of mine from the foot of this guide or if you've just performed the above guide you should already have a functional one, copy this file to your fastboot folder on your computer
**NOTE - Again the above suggested downloads are for the EU/ UK variant- if you have another model / firmware please use that instead, if you did not obtain the boot.img from a firmware and patch it yourself, you will need to patch it again in magisk manager, to avoid a bootloop
2. Reboot your phone to fastboot and connect to your computer.
Command: adb reboot bootloader
3. Open a command prompt on your computer and navigate to your ADB/fastboot folder.
4. Type the following.
fastboot flash boot_a magisk_patched
Press enter.
fastboot flash boot_b magisk_patched
Press enter
fastboot reboot
Press enter
6. Your phone should now boot, open magisk and verify you're rooted.
Troubleshooting
If flashing succeeds but you don't have root and you've followed all the instructions, you may have some magisk modules still active, try performing the following.
1. Connect your phone to your computer.
2. Reboot the phone, then during the boot animation enter this command via ADB.
adb wait-for-device shell magisk --remove-modules
3. Allow to boot, modules will be removed and root should then be active.
Thanks @nycdiplomat for this tip.
If there is no magisk install / update buttons.
1. Make sure you have granted permission to magisk in settings / apps / magisk / permissions
2. Make sure that the update channel is on canary, then force close magisk and then re-open
3. If it still doesn't work then update magisk using canary
4. Last method to check would be to change to the beta channel in magisk settings, then install it.
Or change the update channel, install the version on offer, then change back to canary, install and you should be good to go.
Window's version
Windows 7 will not work with fastboot, please use Windows 10
USB
Use USB 2.0 not 3.0 or 3.1
ADB
These are the files i use for ADB (1st in the below list) tested these on fresh installs of windows on several windows machines, all win 10
Place them into the root of C so it reads C:\ADB much easier to navigate to that way.
Files:
ADB Files for Windows 10:
7.69 MB folder on MEGA
5 files
mega.nz
Payload dumper program for Windows-
https://mega.nz/folder/vU00FZDa#PIEfjl5w5wonyNAwHW3FBQ
Full OTA - Oxygen OS 11.0.1.1 - EU IN11BA -IN2023 FIRMWARE -
https://mega.nz/file/TZl2WIBR#wSP3_bkoWl1FZZX7zfhobo3cYIAhWvDQ9f0ot3_qNFo
Oxygen OS 11.0.0 EU 11.IN11BA - IN2023 Patched boot.img -
https://mega.nz/folder/TE8yWbIL#a6woc43pCpTX_URX5dWr1A
Oxygen OS 11.0.1.1 - EU IN11BA -IN2023 Stock boot.img -
https://mega.nz/folder/6d1mVYgJ#tE90TcwqTLp71SgZX9Xxhg
Oxygen OS 11.0.1.1 - EU IN11BA -IN2023 Patched boot.img -
https://mega.nz/folder/CINjAQCZ#Sns
sRugbc0sELF0ajSAEXg
Boot img patched using Magisk (Canary) version: 1469b82a (21101)
Oxygen OS 11.0.2.2 - EU IN11BA -IN2023 Stock boot.img -
https://mega.nz/folder/PFsmFDKY#01sGzxzVpiAELjcT0LuZmQ
Oxygen OS 11.0.2.2 - EU IN11BA -IN2023 Patched boot.img -
https://mega.nz/folder/vJs0FRBD#SisIJ5FrmkJ3ej1RB6Yz3Q
Boot img patched using Magisk (Canary) version: 1469b82a (21101)
Oxygen OS 11.0.3.3 - EU IN11BA -IN2023 Stock boot.img -
96 MB folder on MEGA
mega.nz
Oxygen OS 11.0.3.3 - EU IN11BA -IN2023 Patched boot.img -
96 MB folder on MEGA
mega.nz
Oxygen OS 11.0.4.4 - EU IN11BA -IN2023 Stock boot.img -
96 MB folder on MEGA
mega.nz
Oxygen OS 11.0.4.4 - EU IN11BA -IN2023 Patched boot.img -
96 MB folder on MEGA
mega.nz
Oxygen OS 11.0.5.5 - EU IN11BA -IN2023 Stock boot.img -
96 MB folder on MEGA
mega.nz
Oxygen OS 11.0.5.5 - EU IN11BA -IN2023 Patched boot.img -
96 MB folder on MEGA
mega.nz
Oxygen OS 11.0.6.6 - EU IN11BA -IN2023 Stock boot.img -
96 MB folder on MEGA
mega.nz
Oxygen OS 11.0.6.6 - EU IN11BA -IN2023 Patched boot.img -
96 MB folder on MEGA
mega.nz
Oxygen OS 11.0.7.7 - EU IN11BA -IN2023 Stock boot.img
96 MB folder on MEGA
mega.nz
Oxygen OS 11.0.7.7 - EU IN11BA -IN2023 Patched boot.img
96 MB folder on MEGA
mega.nz
Oxygen OS 11.0.8.8 - EU IN11BA -IN2023 Stock boot.img
96 MB folder on MEGA
mega.nz
Oxygen OS 11.0.8.8 - EU IN11BA -IN2023 Patched boot.img
96 MB folder on MEGA
mega.nz
Oxygen OS 11.0.9.9 - EU IN11BA -IN2023 Stock boot.img
96 MB folder on MEGA
mega.nz
Oxygen OS 11.0.9.9 - EU IN11BA -IN2023 Patched boot.img
96 MB folder on MEGA
mega.nz
Oxygen OS 11.0.10.10 - EU IN11BA -IN2023 Stock boot.img
96 MB folder on MEGA
mega.nz
Oxygen OS 11.0.10.10 - EU IN11BA -IN2023 Patched boot.img
96 MB folder on MEGA
mega.nz
Oxygen OS 11.0.11.11 EU IN11BA - IN2023
Stock boot.img
16.98 MB file on MEGA
mega.nz
Oxygen OS 11.0.11.11 EU IN11BA - IN2023
Patched boot.img
https://forum.xda-developers.com/attachments/11-0-11-11-europe-patched-24303-zip.5566283/
Android 12 11.C.15 - Stock and patched images from. @tfae
File on MEGA
mega.nz
Hi bro thank you so much for this. I don't understand what to do next now. My phone is already updated to 11 and I want to root it and install masigk etc how do I do that? Its already on version 11 I installed normal version 11 stock rom.
So I was on version 10 before and it was rooted and I had magisk I updated and lost root access and magisk. So now I'm on version 11. I have downloaded your patched boot image but what do I do next could you please hell me?
dblane82222 said:
Hi bro thank you so much for this. I don't understand what to do next now. My phone is already updated to 11 and I want to root it and install masigk etc how do I do that? Its already on version 11 I installed normal version 11 stock rom.
So I was on version 10 before and it was rooted and I had magisk I updated and lost root access and magisk. So now I'm on version 11. I have downloaded your patched boot image but what do I do next could you please hell me?
Click to expand...
Click to collapse
Ah so you're on 11 stock? Have you unlocked the bootloader?
I have a guide based on android 10 here for unlocking the bootloader, lot of similarities.
https://forum.xda-developers.com/oneplus-8-pro/how-to/guide-unlocking-bootloader-rooting-t4151823
Please don't dive in without reading first.
If you've already unlocked the bootloader then you can simply use the magisk_patched img on step 1 of the Rooting section.
Please let me know before you start.
PS: thanks for not quoting the entire post
Bootloader is already unlocked.
Yes I'm on stock 11.
If you've already unlocked the bootloader then you can simply use the magisk_patched img on step 1 of the Rooting section. (Where is this section?)
I'm about to start the process now.
dblane82222 said:
Bootloader is already unlocked.
Yes I'm on stock 11.
If you've already unlocked the bootloader then you can simply use the magisk_patched img on step 1 of the Rooting section. (Where is this section?)
I'm about to start the process now.
Click to expand...
Click to collapse
Yep that should be fine. I think you can also do this from magisk under direct install but I've not tried before and I think it's possible that this may require twrp. So yea go with the root guide.
Should be ok.
Could you give me the link to the Rooting section you have referred too so I know what to do please?
And magisk won't install for me won't let me. So I can't do that. I even tried installing twrp but it won't work.
dblane82222 said:
Could you give me the link to the Rooting section you have referred too so I know what to do please?
And magisk won't install for me won't let me. So I can't do that. I even tried installing twrp but it won't work.
Click to expand...
Click to collapse
No don't install twrp it doesn't work..
Rooting should be a case of installing the magisk_patched IMG to the active slot, you can do both..
The root process is at the bottom of the link i sent you mate.
This is the section on root.
You'll need the magisk_patched file from the OP
Rooting
1. On your computer
Get the magisk_patched file
2. Copy "magisk_patched.img" to C:\Android
3. Navigate to C:\Android
i) Hold shift and right click an empty space within the folder
ii) Click "Open Powershell Window here" or "Open a Command prompt Windows here"
iii) A black or blue window will appear with some text
4. Type the following into the window
adb reboot fastboot
press enter
On your phone
i) Your phone will reboot and show you a screen with 3 language choices, Choose "English" then "Advanced" and finally "Reboot to fastboot" and "Reboot to fastboot"
ii) You'll see a screen appear on your phone with some text, at the top you'll see the word "START" in green, you're now in Fastboot
On your computer
5. Type the following into the window
fastboot flash boot_a magisk_patched.img
press enter
then
fastboot flash boot_b magisk_patched.img
press enter
NOTE* THIS WILL FLASH THE PATCHED BOOT IMG TO BOTH SLOTS, THIS IS WHAT I DID, I HAVEN'T EXPLORED IF ONE SLOT IS ADEQUATE OR NOT, IT MAY BE POSSIBLE TO ONLY FLASH THE BOOT.IMG TO ONE SLOT BUT AS I HAVEN'T I CAN'T ADVISE.
6.. Once complete, type in the following command
fastboot reboot
press enter, your device will reboot
7. On your phone open up "Magisk Manager" you should now have two green ticks signifying that you now have root access.
So long as you have magisk manager installed that's all you need to do besides that guide
Let me know how u get on
dladz said:
Let me know how u get on
Click to expand...
Click to collapse
so every time i do this on my cmd it says unknown partition 'magisk_patched.img'
error cant determine image file name for 'magisk_patched.img'
sorry if i seems stupid.
---------- Post added at 09:44 PM ---------- Previous post was at 09:34 PM ----------
dladz said:
Let me know how u get on
Click to expand...
Click to collapse
okay so its worked now. i managed to flash it but once i restarted the phone its stuck in a loop keeps going to bootloader menu what do i do now?
---------- Post added at 09:57 PM ---------- Previous post was at 09:44 PM ----------
okay so now its gone to crashdump mode?
dblane82222 said:
so every time i do this on my cmd it says unknown partition 'magisk_patched.img'
error cant determine image file name for 'magisk_patched.img'
sorry if i seems stupid.
---------- Post added at 09:44 PM ---------- Previous post was at 09:34 PM ----------
okay so its worked now. i managed to flash it but once i restarted the phone its stuck in a loop keeps going to bootloader menu what do i do now?
---------- Post added at 09:57 PM ---------- Previous post was at 09:44 PM ----------
okay so now its gone to crashdump mode?
Click to expand...
Click to collapse
? What did you flash?
dladz said:
? What did you flash?
Click to expand...
Click to collapse
the file you gave .. the bootimage please help me because im screwed now i dont have a working phone...
so basicaly before i installed what u gave me and it was just stuck on the bootloader screen it wouldnt go off it. at all
so i installed twrp and then it jut crashed mode... please please help me?
So you needed the magisk_patched from the beginning of this thread (the OP)
Then boot to fastboot mode and flash to both slots using ADB / fastboot from Windows..
Then fastboot reboot.
That's literally it mate..that's all I did.
If you're in crashdump mode then i have no idea what you flashed or how you flashed it..shouldn't have done that.
You're on the EU/UK model right?
No reason why it wouldn't have worked.
dblane82222 said:
the file you gave .. the bootimage please help me because im screwed now i dont have a working phone...
so basicaly before i installed what u gave me and it was just stuck on the bootloader screen it wouldnt go off it. at all
so i installed twrp and then it jut crashed mode... please please help me?
Click to expand...
Click to collapse
Ok so do not install twrp it does not work on 11.
Calm down a moment you haven't broken anything so don't worry..
Tell me what screen you're on please. Also can you boot to fastboot mode? Or even bootloader?
Worse case scenario you will have EDL mode and the MSM tool which can get you back up and running..
Do not attempt to install twrp as it will not work and will cause more harm than good.
If you add steps besides what you're meant to do I can't help you pal.
dladz said:
Ok so do not install twrp it does not work on 11.
Calm down a moment you haven't broken anything so don't worry..
Tell me what screen you're on please. Also can you boot to fastboot mode? Or even bootloader?
Worse case scenario you will have EDL mode and the MSM tool which can get you back up and running..
Do not attempt to install twrp as it will not work and will cause more harm than good.
Click to expand...
Click to collapse
yes i think its edl mode. i cant access any mode at all. nothing is accesable. can you please give me the link for the msm tool and what i need to do please thank you ? i really do apprecite all the help.
---------- Post added at 10:20 PM ---------- Previous post was at 10:17 PM ----------
dblane82222 said:
yes i think its edl mode. i cant access any mode at all. nothing is accesable. can you please give me the link for the msm tool and what i need to do please thank you ? i really do apprecite all the help.
Click to expand...
Click to collapse
do you have anything that i can speal to u on thats more instant such as whts app or discord or icq or anything ??
dblane82222 said:
yes i think its edl mode. i cant access any mode at all. nothing is accesable. can you please give me the link for the msm tool and what i need to do please thank you ? i really do apprecite all the help.
---------- Post added at 10:20 PM ---------- Previous post was at 10:17 PM ----------
do you have anything that i can speal to u on thats more instant such as whts app or discord or icq or anything ??
Click to expand...
Click to collapse
I'm actually in bed at the moment pal.
Here's the MSM thread
https://forum.xda-developers.com/on...-tool-to-restore-device-t4084953/post82327013
I think it may have been trying to install twrp.
Before you go down the MSM route.
Try to power off the device without the cable connected..press and hold power and vol down..until the phone turns on.
Should go to bootloader.
If not try it the above with the cable connected to your phone and computer.
If you still can't get in then yes it's MSM time..
Personally have never used it but it's an active thread so always people in there and 10000% someone will have been in the same boat as you.
Not sure what happened with your situation tbh..I tested all the files again myself and they're all legit. I used them before I spoke with you and again just now.
Please though, try not to worry, you'd have to do something mental to break a OnePlus.
You'll be fine.
Let me know how your get on and I'll answer when I can..quite tired at moment.
yeah tried all of that still nothing. going to try the msm solution see what that does its downloading as we speak. but even before the twrp i done what u said and it was stuck on bootloader any idea why that would be ? i can understand it happened becuase i installed twrp and that casued the phone ot enter edl mode. but prior to it it was stuck on bootloader. following just the steps u had said ? once i have got he phone back up and running should i try your mehtod again and see what happens again ?
no problem really apprecite all the help you have given me thank so much.
dblane82222 said:
yeah tried all of that still nothing. going to try the msm solution see what that does its downloading as we speak. but even before the twrp i done what u said and it was stuck on bootloader any idea why that would be ? i can understand it happened becuase i installed twrp and that casued the phone ot enter edl mode. but prior to it it was stuck on bootloader. following just the steps u had said ? once i have got he phone back up and running should i try your mehtod again and see what happens again ?
no problem really apprecite all the help you have given me thank so much.
Click to expand...
Click to collapse
Nah no worries man, just trying to work out what happened..
Once you're back up, maybe ask another thread just to confirm as I'm second guessing myself now..
Don't want you to end up like this again..
See what the chap says in the MSM thread too, his telegram username is in his profile.
To confirm you do have a UK phone right? IN2023 BA
Could have just been the flash didn't go through. You did do a flash and not boot right? To get out of that. Could have just flashed the stock boot.img and that would have saved you
Must Have An Unlocked Bootloader To Do This!
This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magisk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required
Info For Bootloader Unlocks Can Be Found In Post 2
I Do Not Recommend Mixing Bit 5 With Higher Firmware!!!!
Unless Using Bit Safe Firmware That Is Patched
Downloads
SM-N970U/U1/W- Model
USERDATA_AIO_N970_FORCE_WIPE_10_10_21.tar.md5 --Use on android 10 or 11
This will force a wipe of data no mater what.
Full Odin 3.1.1 Bit1 Safe Firmware
N970USQS7FUH3_BIT5_SAFE.7z
This are odin files and will safely update all image files too bit 7 and keep bit 5 bootloaders. Unfortunately this will wipe data this is beyond my control as it seems to be a side affect of mixing firmware it causes data not to mount and therefore my AIO will format it. This is full firmware with USERDATA_AIO. This will put you on U firmware. Before flashing I recommend removing your google account and make sure in download mode you are not frp locked
If above USERDATA_AIO_N970_FORCE_WIPE_08_30_21.tar.md5 is newer than the one in this zip use the newer one from above
Odin3_v3.14.1_3B_PatcheD.zip
Files For SM-N975 Found Here
TWRP Recovery Provide by @afaneh92
Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware
Install Instructions For Newly Unlocked Devices
You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.
2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again
View attachment 5217631
3. Use patched 3.14 odin and load file USERDATA_SLOT_*9**U_**.tar.md5 you must choose one of the FORCE_WIPE files and load in the USERSDATA slot of odin and flash file
4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup
Install Instructions For Updating Firmware On Phone Already Unlocked
1. Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above
2. Use patched 3.14 odin and load stock firmware in appropriate slots use regular CSC file in the CSC slot and load file one of the USERDATA_SLOT_*9**U_**.tar.md5 in the USERSDATA slot of odin and flash firmware. Do not use the User Data file that comes with firmware.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not
Install Instructions If Updating Images With TWRP
1. When done flashing images in TWRP Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above.
2. Use patched 3.14 odin and load file USERDATA_AIO_*9**_NO_WIPE_NO_BL.tar.md5 in the USERSDATA slot of odin and flash file.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not.
4. Alternatively to using USERDATA_AIO_*9**_NO_WIPE_NO_BL.tar.md5 in odin you can use AIO_Magisk_21_4_N10U_US_Series_Android_R.zip found in post 2
Features
No patches or mod zips are needed phone will already be rooted
Fix Safetynet
Bluetooth is patched for pairing to survive reboots
Samsung Health working
Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms
Thanks To People That Make My Life Easier
@elliwigy
@klabit87
@Krog18
@me2151
@stang5litre
@Raymonf for modified odin
@rayan-refoua for boot animation
@TheMadScientist
@afaneh92
@kdrag0n for safetynet fix
3arthur6 for bluetooth patch zip
@JDBarlow for test S20 stuff
Info For Bootloader Unlocks Can Be Found
[Android][UNSAMLOCK] Bootloader Unlock for Samsung US/Canada Devices
This thread is @svetius approved Important notice: Do not update to April 2023 security update (XXXXXXXXXXWCX) or later. Examples: G998USQS6EWCA, N986USQU4HWD1. Samsung has patched the bootloader unlock again on those updates. NOTE: The OneUI...
forum.xda-developers.com
Hey can you help me with this process. I am not entirely to sure if my s10e varient is capable of root/unlocking bootloader.
Hello People..
I have an S20 5g (SCG01) - Japan. And I want to convert it to US Version as the current Firmware 'SCG01KDU1DWA4' does not have E-Sim option. I tried to Flash "G981U1_XAA_G981U1UES3HWB5" , "XAA_G981U1UEU1DUCC" from Odin but it Fail and gives Errors (PIT File repartition failed) #even after adding PIT file.
So does anyone know how to Convert the SCG01 Model to any other Model supporting E-Sim. Currently I'm root with Magisk and Bootloader Unlocked with Firmware SCG01KDU1DWA4.
Any Help would be appreciated.
Prathamesh Kapure said:
Hello People..
I have an S20 5g (SCG01) - Japan. And I want to convert it to US Version as the current Firmware 'SCG01KDU1DWA4' does not have E-Sim option. I tried to Flash "G981U1_XAA_G981U1UES3HWB5" , "XAA_G981U1UEU1DUCC" from Odin but it Fail and gives Errors (PIT File repartition failed) #even after adding PIT file.
So does anyone know how to Convert the SCG01 Model to any other Model supporting E-Sim. Currently I'm root with Magisk and Bootloader Unlocked with Firmware SCG01KDU1DWA4.
Any Help would be appreciated.
Click to expand...
Click to collapse
how to root SCG01....i m on android 13
abusayed144 said:
how to root SCG01....i m on android 13
Click to expand...
Click to collapse
1. Unlock your bootloader.
2. Download TWRP S20: x1q, S20+: y2q or S20 Ultra z3q.
3. Reboot to download mode and flash vbmeta_disabled.tar in AP slot and reboot. Device will reboot to stock recovery mode prompting you to wipe data so wipe data and reboot to download mode again.
4. Put the TWRP tar for your device with Odin in the AP slot and click start.
5. Reboot to recovery via recovery key combo.
6. Disable encryption:
- Go to Advanced > Terminal, type: multidisabler, will show - Finished. when done.
7. Go back to Wipe > Format Data > type yes.
8. Reboot to recovery.
9. Flash magisk apk in twrp.
10. Reboot to system, Enjoy.
Let me know if it did work for You..