I have the error device is not certified with locked bootloader after reflashing the persist partition when it was corrupted (I took persist.img file from fastboot rom). I think that a dump of persist partition from the other poco f3 may solve this problem. Dump of persist partition can be made with termux using this commands (need root): 1. su 2. dd if=/dev/block/by-name/persist of=/sdcard/persist.img So, can someone do it and send a file?
Pocouser1357 said:
I have the error device is not certified with locked bootloader after reflashing the persist partition when it was corrupted (I took persist.img file from fastboot rom). I think that a dump of persist partition from the other poco f3 may solve this problem. Dump of persist partition can be made with termux using this commands (need root): 1. su 2. dd if=/dev/block/by-name/persist of=/sdcard/persist.img So, can someone do it and send a file?
Click to expand...
Click to collapse
My Poco F3 is currently on Xiaomi.eu MIUI 14 Weekly. I'm about to flash Stock Poco MIUI 13.0.9 EEA but will keep the bootloader unlocked. I can backup the Persist-partition with my OrangeFox Recovery, do you still want it?
BTW, i'm not sure if I myself would get the Persist-error... On Xiaomi.eu right now I did not get this error.
cyanGalaxy said:
I can backup the Persist-partition with my OrangeFox Recovery, do you still want it?
Click to expand...
Click to collapse
Yes, if it is possible, send the backup of persist
cyanGalaxy said:
My Poco F3 is currently on Xiaomi.eu MIUI 14 Weekly. I'm about to flash Stock Poco MIUI 13.0.9 EEA but will keep the bootloader unlocked. I can backup the Persist-partition with my OrangeFox Recovery, do you still want it?
BTW, i'm not sure if I myself would get the Persist-error... On Xiaomi.eu right now I did not get this error.
Click to expand...
Click to collapse
So, could you send your persist backup?
Pocouser1357 said:
I have the error device is not certified with locked bootloader after reflashing the persist partition when it was corrupted (I took persist.img file from fastboot rom). I think that a dump of persist partition from the other poco f3 may solve this problem. Dump of persist partition can be made with termux using this commands (need root): 1. su 2. dd if=/dev/block/by-name/persist of=/sdcard/persist.img So, can someone do it and send a file?
Click to expand...
Click to collapse
1) Clean Flash any A12 AOSP rom
2) Reboot into the rom and use it for 10min
3) Clean Flash Stock Fastboot rom
This procedure worked according to some people with this problem
Hi,
Yep been there, it very easy to get a fresh copy from any MIUI rom, my F3 is the EEA version, i used Alioth_eea_V12.5.6.0.RKHEUXM_07-09-2021,
Pocouser1357 said:
I have the error device is not certified with locked bootloader after reflashing the persist partition when it was corrupted (I took persist.img file from fastboot rom). I think that a dump of persist partition from the other poco f3 may solve this problem. Dump of persist partition can be made with termux using this commands (need root): 1. su 2. dd if=/dev/block/by-name/persist of=/sdcard/persist.img So, can someone do it and send a file?
Click to expand...
Click to collapse
Hi Been there,
but i have a unlocked bootloader, i downloaded the latest MIUI Firmware, only to be faced with the dreaded,
"find device storage corrupted your device is unsafe now"
what was strange is that when i logged into my Miui account the message disappeared as soon as i signed out of my account the message came back,
i tried a Xiaomi.eu rom but i still had the same issue.
I backed up a copy of my Persist.img file "just in case" using TWRP Recovery`s built in terminal: using the command dd if=/dev/block/bootdevice/by-name/persist of=/sdcard/persist.img.
I used TWRP Recovery 3.6.2 12 POCOF3 v6.3 A12-alioth-skkk to flash the persist.img from the "Original" https://xiaomifirmwareupdater.com/miui/alioth/stable/V12.5.6.0.RKHEUXM/
rom and that did the trick, no more nag screen.
Please note this Persist.img is for EEA Firmware only,
I hope this helps
johnr64 said:
Hi Been there,
but i have an unlocked bootloader, i downloaded the latest MIUI Firmware, only to be faced with the dreaded "find device storage corrupted your device is unsafe now", what was funny is that when i logged into my Miui account the message disappeared, as soon as i signed out of my account the message came back,
i tried a Xiaomi.eu rom but i still had the same issue.
I backed up a copy of my Persist.img file just in case using the TWRP Recovery built in terminal: using the command dd if=/dev/block/by-name/persist of=/sdcard/persist.img.
I used TWRP to flash the persist.img from the original fastboot rom and that did the trick, no more nag screen.
Please note this for EEA Firmware, https://pixeldrain.com/u/LVDrGrm8
I hope this helps
Click to expand...
Click to collapse
Is you device certified with locked bootloader? I tried this methode, no more error but the device is not certified with locked bootloader
makes me wonder why people ignore the fix because it sounds easy and look for complicated methods that dont fix the issue
3zozHashim said:
1) Clean Flash any A12 AOSP rom
2) Reboot into the rom and use it for 10min
3) Clean Flash Stock Fastboot rom
This procedure worked according to some people with this problem
Click to expand...
Click to collapse
didn't work bro, do you know any other trick for this?
Did you find the img bro
airb05 said:
didn't work bro, do you know any other trick for this?
Click to expand...
Click to collapse
This process works, I have done it last week. I was getting that storage corrupted message, but all sensors were working fine. My issue was due improper downgrade stages from A13 to A11, this should be step by step A13> A12> A11. I have not touched persist partition until used these steps. MIUI 14 A13 EU > PE 12 (Use it for few minutes) > Flash A12 stock using MI flash. Use this safe method, flashing persist is only last resort and useful when sensors are broken. I hope someone pin these steps, coz i was struggling to find such instructions for almost 2 months. Thank you 3zozHashim
ketanmore said:
This process works, I have done it last week. I was getting that storage corrupted message, but all sensors were working fine. My issue was due improper downgrade stages from A13 to A11, this should be step by step A13> A12> A11. I have not touched persist partition until used these steps. MIUI 14 A13 EU > PE 12 (Use it for few minutes) > Flash A12 stock using MI flash. Use this safe method, flashing persist is only last resort and useful when sensors are broken. I hope someone pin these steps, coz i was struggling to find such instructions for almost 2 months. Thank you 3zozHashim
Click to expand...
Click to collapse
Can you please send us dump for persist partition because we flashed the persist and this blown away key attestation generator.
Ineed a backup from a working phone to regenerate the the gey attestation generator
I made it before in one plus and worked perfectly
ketanmore said:
This process works, I have done it last week. I was getting that storage corrupted message, but all sensors were working fine. My issue was due improper downgrade stages from A13 to A11, this should be step by step A13> A12> A11. I have not touched persist partition until used these steps. MIUI 14 A13 EU > PE 12 (Use it for few minutes) > Flash A12 stock using MI flash. Use this safe method, flashing persist is only last resort and useful when sensors are broken. I hope someone pin these steps, coz i was struggling to find such instructions for almost 2 months. Thank you 3zozHashim
Click to expand...
Click to collapse
i already flashed persist.img bro i can't wait so long for someone to reply but thanks for your help
ketanmore said:
My issue was due improper downgrade stages from A13 to A11, this should be step by step A13> A12> A11.
Click to expand...
Click to collapse
Interesting. I think this might be it because if I remember correctly I too tried to go back to A11 from A13 and then the error appeared.
Edit: Tried it and it didn't work for me.
For me i tried to go back to pixel experience A13 from MIUI 14 Eu rom and again to stock MIUI 13. Any Solution?
puskalregmi9 said:
For me i tried to go back to pixel experience A13 from MIUI 14 Eu rom and again to stock MIUI 13. Any Solution?
Click to expand...
Click to collapse
I tried the A13>A12>A11 downgrade recently but unfortunately it didn't work.
I turned on location and logged into my MI account. Rebooted a few times and then flashed persist.img from twrp. After flashing the persist.img the error is gone now.
No clear solution for now. Trial and error.
user0u said:
I tried the A13>A12>A11 downgrade recently but unfortunately it didn't work.
I turned on location and logged into my MI account. Rebooted a few times and then flashed persist.img from twrp. After flashing the persist.img the error is gone now.
No clear solution for now. Trial and error.
Click to expand...
Click to collapse
Which TWRP version did you use? And miui version.
puskalregmi9 said:
Which TWRP version did you use? And miui version.
Click to expand...
Click to collapse
I went from Custom A13 Rom > Official MIUI 13 > Official MIUI 12.
TWRP 3.6.1_11-0 was used while on MIUI 12 to flash persist.
user0u said:
I went from Custom A13 Rom > Official MIUI 13 > Official MIUI 12.
TWRP 3.6.1_11-0 was used while on MIUI 12 to flash persist.
Click to expand...
Click to collapse
Thanks i will try the same. Can you help me flash persist via twrp, i tried via orange fox didnot suceed.
Related
I was looking for a TWRP for the Xiaomi Mi Mix 2. I've found a chinese board where a user called YouLinw compiled TWRP for us. According to him and the users there (Google Translator) it seems to work. Can't test it by now, because my Xiaomi Mi Mix 2 isn't shipped right now. It was really tricky to register in this chinese board and then to download the file. You can download it yourself in the board and for all other users I made a mirror with no registration.
There's now a new english TWRP from Xiaomi.eu.
I don't take any responsibilities for this file. If you break or damage your phone, it's your fault!
The recovery is in chinese - but you shuold be able to use it with screenshots in your language.
Download: https://filebase.philipp.technology/filebase/index.php?page=Entry&entryID=12
Credits: https://xiaomi.eu/community/threads/twrp-3-1-1-for-xiaomi-mix-2.41634/
Installation:
Unlock your phone - http://en.miui.com/unlock/
Download TWRP from the link above
Flash over Fastboot
Hope you like it.
Great find! Any idea what version of SuperSU can be used to root The device ?
In this chinese board there's something written like, that SuperSu 2.82 is suitable for the Mix 2 (without guarantee).
PJF16 said:
I was looking for a TWRP for the Xiaomi Mi Mix 2. I've found a chinese board where a user called YouLinw compiled TWRP for us. According to him and the users there (Google Translator) it seems to work. Can't test it by now, because my Xiaomi Mi Mix 2 isn't shipped right now. It was really tricky to register in this chinese board and then to download the file. You can download it yourself in the board and for all other users I made a mirror with no registration.
I don't take any responsibilities for this file. If you break or damage your phone, it's your fault!
The recovery is in chinese - but you shuold be able to use it with screenshots in your language.
Credits & Download: http://bbs.zhiyoo.com/.php?mod=viewthread&tid=13431779&extra=page=1&page=1&state=1
Download (Mirror): https://filebase.philipp.technology/filebase/index.php?page=Entry&entryID=11
Installation:
Unlock your phone - http://en.miui.com/unlock/
Download TWRP from the link above
Flash over Fastboot
Hope you like it.
Click to expand...
Click to collapse
I find another TWRP under mi-globe.com You can try to download at below link:
https://www.filehost.com/?fid=817550096634801044
I added now a new TWRP from a Xiaomi.eu Founder.
Xiaomi.eu released rom for Mi Mix 2, it's called chiron. TWRP as the linked it, here. Might be the same as the OP linked tho.
Should work. My phone arrives next week i will test it.
Yes, it's the same (also see Credits).
PJF16 said:
I added now a new TWRP from a Xiaomi.eu Founder.
Click to expand...
Click to collapse
Me too comes to me next week. I will try it.
Hello guys,
I've flash with fastboot TWRP for my mix2 but when i restarted with fasboot on TWRP it ask me for a password.
Second point : I have no access to files like the xiaomi.eu rom stored on my phone.
anyone faced these issue and is there any solution ? (the bootloader is well unlocked)
ANd when i restart in recovery my phone with power and vol + button, i have the xiaomi recovery and not TWRP.
It is strange, no ??
Thanks for your help
PJF16 said:
In this chinese board there's something written like, that SuperSu 2.82 is suitable for the Mix 2 (without guarantee).
Click to expand...
Click to collapse
Can confirm, superSU 2.82 works on Xiaomi EU rom version 7.9.22
unable to mount /system after nadroid backup
TWRP installed fine and experienced no issues until I made a full Nandroid backup. After the backup I have issues flashing because the device is unable to mount /system . busy or in use error.
So now I wait until official TWRP.
If you are having any twrp issues just reboot into twrp and the issues will be gone. Try again!
Dust2Dust said:
TWRP installed fine and experienced no issues until I made a full Nandroid backup. After the backup I have issues flashing because the device is unable to mount /system . busy or in use error.
So now I wait until official TWRP.
Click to expand...
Click to collapse
Same here
***TAPATALKING***
Is this recovery work on Xiaomi Miui 9 beta rom....?
brunsman6229 said:
Is this recovery work on Xiaomi Miui 9 beta rom....?
Click to expand...
Click to collapse
I am using TWRP with the EU beta 9.
真的假的？
tnt3400 said:
真的假的？
Click to expand...
Click to collapse
English please.
MementoM said:
For the life of me I cannot get this TWRP to do anything. My phone came with Global 8.5 Stable. I confirmed my bootloader is unlocked. I flashed the TWRP and booted it, it boots fine but trying to backup anything I get Failed to unmount "/system" (Device or resource busy). I tried to reboot back into TWRP still same problem, I tried to reflash TWRP through both fastboot and TWRP image installer. I downloaded the EU rom and tried to flash it and it also failed to flash. OEM unlock is checked, USB debugging is on. TWRP gets over written with the Mi Mix recovery whenever I boot back into system, it doesn't ask me if I want to modify anything when it first boots. Why is this giving me so much trouble I've never encountered this problem with TWRP. Any Advice?.
Thanks much
Click to expand...
Click to collapse
There is still no official TWRP available. I always do a full wipe factory reset and manual wipe everything before flashing anything. I also get the errors, but I've never tried to restore a backup because I usually just do clean installs each time because the ROMs available right now aren't stable enough for daily use.
The trick for EU rom is complete wipe than boot back into TWRP and try flashing. You will get 2 errors but will install fine. You can install USB drive or transfer EU rom through mtp via TWRP.
I'll do it like @allrockedout
It seems this TWRP is more beta than stable :-/
Also check the "Mount" button and uncheck the option to open all partitions readonly.
Then reboot TWRP. Last but not least before performing any flash operations (ROM or Magisk/SU-Stuff) check all partitions as marked - then do your flash work
i also miss some more partition that are available to other devices like EFS.
Did anyone know about another TWRP version or devs that are working on one?
raupe said:
I'll do it like @allrockedout
It seems this TWRP is more beta than stable :-/
Also check the "Mount" button and uncheck the option to open all partitions readonly.
Then reboot TWRP. Last but not least before performing any flash operations (ROM or Magisk/SU-Stuff) check all partitions as marked - then do your flash work
i also miss some more partition that are available to other devices like EFS.
Did anyone know about another TWRP version or devs that are working on one?
Click to expand...
Click to collapse
I recommend twrp by @IceMan_it https://www.movilesdualsim.com/index.php?threads/180006
For backup and Restore (with EFS!) with Linux 64 bit https://www.movilesdualsim.com...rilinguee.180989/#post-2060493
Credit: @IceMan_it
Inviato dal mio Mi Note 2 utilizzando Tapatalk
how to root mi max 3 on miui 10 global stable rom
I am also looking for that. yet ı cant find the real true sequence. there ıs twrp and magisk and root so many things... even if i get twrp installed it asks for passwords and i dont know what to do next..
1. Unlooking Bootloader (Official way)
2. Install modded TWRP from this thread: https://forum.xda-developers.com/mi-max-3/development/recovery-twrp-3-2-3-1-nitrogen-t3866084
3. Install newest Magisk Version through TWRP.
4. Done
Did it to my Global Mi Max 3 with 10.0.1.0 MIUI installed without any problems.
Uschinator said:
1. Unlooking Bootloader (Official way)
2. Install modded TWRP from this thread: https://forum.xda-developers.com/mi-max-3/development/recovery-twrp-3-2-3-1-nitrogen-t3866084
3. Install newest Magisk Version through TWRP.
4. Done
Did it to my Global Mi Max 3 with 10.0.1.0 MIUI installed without any problems.
Click to expand...
Click to collapse
Thanks. Did the same and it worked.. Which rom are you using?
Hi , I've unlock the bootloader then flash twrp but any time I enter recovery it ask for a password.
I've try formatting data partition from twrp but it's the same...
What can I do ?
thank's.
Hi
I got this xiaomi mi max3(MIUI Global 10.3.3) at some auciton and I was trying to flash TWRP, and it seemed to be failed.
The bootloader is unlocked from the start and flashing TWRP is succeeded, but either by command prompt or by pressing buttons
I can't get into TWRP.
If anone has any idea please help.
tometoyona said:
Hi
I got this xiaomi mi max3(MIUI Global 10.3.3) at some auciton and I was trying to flash TWRP, and it seemed to be failed.
The bootloader is unlocked from the start and flashing TWRP is succeeded, but either by command prompt or by pressing buttons
I can't get into TWRP.
If anone has any idea please help.
Click to expand...
Click to collapse
use OrangeFox recovery work 100% miui 10.3.5 https://forum.xda-developers.com/mi-max-3/development/official-orangefox-recovery-project-t3890821
extract zip orangefox and execute fastboot boot recovery.img
LostFade said:
use OrangeFox recovery work 100% miui 10.3.5 https://forum.xda-developers.com/mi-max-3/development/official-orangefox-recovery-project-t3890821
extract zip orangefox and execute fastboot boot recovery.img
Click to expand...
Click to collapse
Orange Fox works but I get the same message about the password I got with TWRP. What is the difference?
By the way: I was able to flash magisk with TWRP and all seems to be fine, I just disregarded the TWRP notification about the password...
Gadgetguy65 said:
Orange Fox works but I get the same message about the password I got with TWRP. What is the difference?
By the way: I was able to flash magisk with TWRP and all seems to be fine, I just disregarded the TWRP notification about the password...
Click to expand...
Click to collapse
if problem is password only, format data.
LostFade said:
if problem is password only, format data.
Click to expand...
Click to collapse
I did not want to format anything. I just left it as is (clicked cancel at the password) and flashed the ZIP for Magisk. All works fine after this
anyone tried to root recently? i am also iinterested
Uschinator said:
1. Unlooking Bootloader (Official way)
2. Install modded TWRP from this thread: https://forum.xda-developers.com/mi-max-3/development/recovery-twrp-3-2-3-1-nitrogen-t3866084
3. Install newest Magisk Version through TWRP.
4. Done
Did it to my Global Mi Max 3 with 10.0.1.0 MIUI installed without any problems.
Click to expand...
Click to collapse
Can confirm this works on 10.3.5 also.
DelphinusMinor said:
Can confirm this works on 10.3.5 also.
Click to expand...
Click to collapse
do u know what's the difference between that twrp and the original one?
HSWG said:
do u know what's the difference between that twrp and the original one?
Click to expand...
Click to collapse
No. Maybe it's coded better for Xiaomi phones?
Request Unlock from Xiaomi.
Wait for 1 week. (98 hours)
Search "XiaoMiTool V2"
Don't bother with image flashing. Just follow XiaoMiTool V2.
HSWG said:
do u know what's the difference between that twrp and the original one?
Click to expand...
Click to collapse
The recovery from nigel8 is outdated.
Use orange fox because since a while nigel8 one doesn't support encryption.
Then follow the others steps explained
Regards
Sent from my MI MAX 3 using XDA Labs
Skyllery said:
The recovery from nigel8 is outdated.
Use orange fox because since a while nigel8 one doesn't support encryption.
Then follow the others steps explained
Regards
Sent from my MI MAX 3 using XDA Labs
Click to expand...
Click to collapse
i'm reading up on it now, is orange fox better than twrp? i've never used it..
also, why is encryption support for?
donia1022006 said:
how to root mi max 3 on miui 10 global stable rom
Click to expand...
Click to collapse
This is actually quite easy
1. Unlock the phone using the well documented process
2. Download TWRP for Mi Max 3 (on your PC)
3. Get ADB tools on your PC
4. Download Magisk.zip on the phone
5. Put your phone in fastboot mode
6. Boot TWRP on the phone ( no need to install, you can disregard the encryption comment)
7. Using TWRP flash the Magisk.zip you have downloaded
8. Reboot - and you are rooted
its been 1 hour 20 minutes since i successfully flashed the K40 CN rom onto my poco f3, i know it worked because instead of Poco in boot up screens its redmi, but its taking a long time to boot up, is this normal?
boot shouldnt take an hour,you probably need to format the data partition.
metalspider said:
boot shouldnt take an hour,you probably need to format the data partition.
Click to expand...
Click to collapse
i did choose the clean all option in miflash, but what do i do now?
format it in twrp or try running
fastboot erase metadata
fastboot -w
metalspider said:
format it in twrp or try running
fastboot erase metadata
fastboot -w
Click to expand...
Click to collapse
its not working, im having redmi note 8t flashbacks right now, this is exactly what happened when i tried back then
you sure your installing the k40 and not k40pro? different device names.
if your using twrp ill state again you have to format data with the prompt to type yes.ive seen too many times people just doing a regular wipe.
another thing to try even i dont see it in the guide is to disable verity checks if it still isnt booting.
can you acces fastboot ? or recovery?
power and volume up? try turn it off and then recovery and factory reset.see if that helps.
hexisg said:
can you acces fastboot ? or recovery?
power and volume up? try turn it off and then recovery and factory reset.see if that helps.
Click to expand...
Click to collapse
i got it to work, i just used a different version of rom to flash
hecc_itsme said:
its been 1 hour 20 minutes since i successfully flashed the K40 CN rom onto my poco f3, i know it worked because instead of Poco in boot up screens its redmi, but its taking a long time to boot up, is this normal?
Click to expand...
Click to collapse
Wich version was on your poco f3
hecc_itsme said:
i got it to work, i just used a different version of rom to flash
Click to expand...
Click to collapse
Wich version did you use
I'm pretty sure he used other ROM than the one for Poco F3 (wrong ROM from the start).
Hi! 2 days ago I just installed two updates (MIUI 12.5 or something, then MIUI 13 with Android 12) on my rooted POCO F3, I unrooted with magisk before every update, then when it requested to reboot, I installed back magisk. The updates were installed succesfuly and the phone was working properly until it shut down because of no battery. When I tried to turn it on the phone took like 5 minutes to get to the MIUI screen and then restarted directly in Recovery Mode. What can I do about it?
Also, can I flash it without losing data, I have photos and documents that I didn't back up?
Or can I just recover something from it?
Cosminxda said:
Hi! 2 days ago I just installed two updates (MIUI 12.5 or something, then MIUI 13 with Android 12) on my rooted POCO F3, I unrooted with magisk before every update, then when it requested to reboot, I installed back magisk. The updates were installed succesfuly and the phone was working properly until it shut down because of no battery. When I tried to turn it on the phone took like 5 minutes to get to the MIUI screen and then restarted directly in Recovery Mode. What can I do about it?
Also, can I flash it without losing data, I have photos and documents that I didn't back up?
Or can I just recover something from it?
Click to expand...
Click to collapse
Use twrp and check whether it can decrypt storage - A12 version by nebrassy
Rstment ^m^ said:
Use twrp and check whether it can decrypt storage - A12 version by nebrassy
Click to expand...
Click to collapse
I booted into twrp and it doesn't recognise the password that I use
Can I do something else?
Cosminxda said:
Can I do something else?
Click to expand...
Click to collapse
I have no idea... Try flashing stock boot image.
Download fastboot rom , unzip it. Open images folder and find boot.img
Fastboot flash boot_ab boot.img
If that doesn't work either try skkk twrp
Rstment ^m^ said:
I have no idea... Try flashing stock boot image.
Download fastboot rom , unzip it. Open images folder and find boot.img
Fastboot flash boot_ab boot.img
Click to expand...
Click to collapse
If I try this will my data get erased?
Rstment ^m^ said:
If that doesn't work either try skkk twrp
Click to expand...
Click to collapse
DUDE THANK YOU! I tried this and I got access to all my files, now I just want to know, is it possible to restore my phone or I just have to get file after file from it?
Cosminxda said:
DUDE THANK YOU! I tried this and I got access to all my files, now I just want to know, is it possible to restore my phone or I just have to get file after file from it?
Click to expand...
Click to collapse
I suggest flash original boot.img if you wanna try restoring phone... This only removes magisk. Tho if you have pc and you're gonna be downloading fastboot rom anyways might as well do a clean flash instead - flash_all.bat file
Especially since you used skkk twrp... It's sources don't exist , so run the files you pulled from it through antivirus of some sorts and flash phone with stock rom
How did it happen anyways? You deleted magisk via app, then flashed it via PC before phone booted from OTA?
you can flash latest rom from xiaomi using the mi flash tool without losing user data
Rstment ^m^ said:
I suggest flash original boot.img if you wanna try restoring phone... This only removes magisk. Tho if you have pc and you're gonna be downloading fastboot rom anyways might as well do a clean flash instead - flash_all.bat file
Especially since you used skkk twrp... It's sources don't exist , so run the files you pulled from it through antivirus of some sorts and flash phone with stock rom
How did it happen anyways? You deleted magisk via app, then flashed it via PC before phone booted from OTA?
Click to expand...
Click to collapse
I will try to do that. Is the command fastboot flash boot_ab boot.img?
So i searched for a fast method to upgrade my phone without losing root on youtube because I already didn't upgrade it from when I bought it. I did exactly what he did in the video twice, because I had 2 updates, this is the vid
After I did all of that, everything went well only for one day until my phone shut down because of programmed shut down and startup (I chose it for battery saving lol), yeah it shut down at 12am when I was awake, I tried starting it again when I found myself in a bootloop. And this is how it got stuck in a bootloop.
You need to do a data format..
Andreasgbrv2 said:
You need to do a data format..
Click to expand...
Click to collapse
Rstment ^m^ said:
I suggest flash original boot.img if you wanna try restoring phone... This only removes magisk. Tho if you have pc and you're gonna be downloading fastboot rom anyways might as well do a clean flash instead - flash_all.bat file
Especially since you used skkk twrp... It's sources don't exist , so run the files you pulled from it through antivirus of some sorts and flash phone with stock rom
How did it happen anyways? You deleted magisk via app, then flashed it via PC before phone booted from OTA?
Click to expand...
Click to collapse
Thank you again!!!! I booted boot.img and repaired my phone, the only problem is that the dialer app lost it's name (it's named com.google.something dialer) and it's icon, oh it also crashes
Andreasgbrv2 said:
You need to do a data format..
Click to expand...
Click to collapse
I don't think so, i recovered my phone for now
Thank you everyone for helping me, especially Rstment ^m^! I rooted my phone back again and everything works without any corrupted files!
Cosminxda said:
Thank you everyone for helping me, especially Rstment ^m^! I rooted my phone back again and everything works without any corrupted files!
Click to expand...
Click to collapse
Can you help me?
I recently flashed Xiaomi EU ROM on my Poco f3. Everything was running great until I tried to flash twrp. Everytime I try to flash twrp my phone boots into stock recovery .
When I use the latest 3.7 twrp my phone boots into the custom recovery but I cannot mount the data partition. Is there any solution to this ?
CodeNameLiquid said:
I recently flashed Xiaomi EU ROM on my Poco f3. Everything was running great until I tried to flash twrp. Everytime I try to flash twrp my phone boots into stock recovery .
When I use the latest 3.7 twrp my phone boots into the custom recovery but I cannot mount the data partition. Is there any solution to this ?
Click to expand...
Click to collapse
Try this one
https://dl.akr-developers.com/?file...OCOF3-Mi11X_v6.0_A12-alioth-skkk_b3647986.zip
BOOT VERSION
Installation:
Phone in fastboot mode
Cmd:
fastboot boot twrp.img
Power shell
./fastboot boot twrp.img
then in Twrp go to Advanced -> flash current TWRP.
This link is not working can you provide any alternative ?
CodeNameLiquid said:
This link is not working can you provide any alternative ?
Click to expand...
Click to collapse
edited link.
I tried it but it didn't work. Everytime I try this my phone just powers off and I have to hold power button to start it and I still have the stock recovery
Also I don't know if it's important but I am rooted with latest magisk on Xiaomi EU rom
CodeNameLiquid said:
I tried it but it didn't work. Everytime I try this my phone just powers off and I have to hold power button to start it and I still have the stock recovery
Click to expand...
Click to collapse
Post the screen shot of Fastboot command.
Here you go...
CodeNameLiquid said:
Here you go...
Click to expand...
Click to collapse
You don't have a pc?
I have a pc but its very late at night so i used my other phone
Also when i use the latest twrp img it boots up but is unable to mount the data partition
CodeNameLiquid said:
I have a pc but its very late at night so i used my other phone
Also when i use the latest twrp img it boots up but is unable to mount the data partition
Click to expand...
Click to collapse
Try with a pc.
rename the twrp to twrp.img.
Most often is "possibly:
Unroot.
install Platform tools, put the twrp in the folder.
Run the command from platform tools.
The one you are trying to install is the last one.
I already did everything , tried every method still everytime twrp gets replaced
I also tried orangefox but still same result
I also had the same problem on lineage os
CodeNameLiquid said:
I already did everything , tried every method still everytime twrp gets replaced
I also tried orangefox but still same result
I also had the same problem on lineage os
Click to expand...
Click to collapse
For summary only version twrp-3.7.0_12-0-alioth-TeamWin.img worked?
Try to start from scratch:
Use Miflash without locking the bootloader.
Yes only the latest version booted but with a lot less features compared to the skkk twrp i used a while ago
I am afraid using miflash to flash eu rom on my phone would hard brick it
CodeNameLiquid said:
Yes only the latest version booted but with a lot less features compared to the skkk twrp i used a while ago
I am afraid using miflash to flash eu rom on my phone would hard brick it
Click to expand...
Click to collapse
You cannot flash a Xiaomi Eu rom with Miflash, only stock roms, EEA, Global etc..
Just don't lock the bootloader.
What exactly do you want to do with TWRP?
I want to remount my system partition as rw.
CodeNameLiquid said:
I want to remount my system partition as rw.
Click to expand...
Click to collapse
Due to dynamic and A/B partitions this is not directly possible without a dedicated script.
What kind of script ?
Also to let you know i was able to remount system as rw on most custom roms i had on my phone
CodeNameLiquid said:
What kind of script ?
Also to let you know i was able to remount system as rw on most custom roms i had on my phone
Click to expand...
Click to collapse
On MIUI not AOSP.
Can you tell me more about this script ?
CodeNameLiquid said:
Can you tell me more about this script ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/m/lebigmac.8039604/