Hi,
As soon as I've received my Pixel in October I unlocked its bootloader and rooted it. Ever since, each time there is a system update available, I get an error saying "Installation problem" if I try to install it manually in the settings and an notification saying "Couldn't install system update, tap for more infos" when the device try to install it over night. So every time I have to update my pixel using a computer, but it never ends well and I end up losing my data (I have backups but it's still infuriating). What is going on ? I can't find anything online to help me.
Since that time, there was also a message saying "Your device is corrupted and cannot be trusted" when I was turning my phone on (right before the Android logo), but I've managed to remove it using the "disable vbmeta verification" option during the last update. Are those linked ?
I don't know if it helps, but I've attached screenshots of my magisk modules and the error message with this post.
Thank you by advance !
That's because your boot partition has been modified and signature does not match. It therefore refuses to update in order to protect you from mismatches.
You need to perform the updates manually, which means downloading the factory image and modifying the installer script (flash-all.sh) to remove the wipe (-w parameter to 'fastboot update'). You will also extract the new boot image and reapply magisk to it if you intend to retain root privileges.
Papipoulpe said:
Hi,
As soon as I've received my Pixel in October I unlocked its bootloader and rooted it. Ever since, each time there is a system update available, I get an error saying "Installation problem" if I try to install it manually in the settings and an notification saying "Couldn't install system update, tap for more infos" when the device try to install it over night. So every time I have to update my pixel using a computer, but it never ends well and I end up losing my data (I have backups but it's still infuriating). What is going on ? I can't find anything online to help me.
Since that time, there was also a message saying "Your device is corrupted and cannot be trusted" when I was turning my phone on (right before the Android logo), but I've managed to remove it using the "disable vbmeta verification" option during the last update. Are those linked ?
I don't know if it helps, but I've attached screenshots of my magisk modules and the error message with this post.
Thank you by advance !
Click to expand...
Click to collapse
As stated earlier, since you are rooted your boot partition is modified and thus you are failing due to not passing the pre-OTA block verifications.
You can:
1. Try the "Install to Inactive Slot" method in Magisk. Note that this has been hit or miss for users.
2. Update via Pixel Flasher. You can keep root this way.
3. Flash the stock boot image to unroot, update via OTA and then re-root.
4 Update via Android Flash Tool. You will have to re-root afterwards.
5. Flash the Factory Image and then re-root. There is a way to keep root via this method by modifying your flash-all.bat file. Search the forums for the guides.
6. Sideload the OTA and then re-root.
Thanks you two for your answers. So does everyone with a rooted pixel do this every month or have I f*cked up something during previous installs that invalidates my os ?
Papipoulpe said:
Thanks you two for your answers. So does everyone with a rooted pixel do this every month or have I f*cked up something during previous installs that invalidates my os ?
Click to expand...
Click to collapse
Every month is a bit overkill, but essentially yes.
Papipoulpe said:
Thanks you two for your answers. So does everyone with a rooted pixel do this every month or have I f*cked up something during previous installs that invalidates my os ?
Click to expand...
Click to collapse
Yes everyone who is rooted must manually update
I just use flashtool and never have problems
I would start fresh with flashtool. Check only* the boxes 'wipe device' and 'force flash partitions'
When you want to update, use flashtool with none of the boxes checked. Get the boot.img file from the factory image, patch it, boot it then direct install. Never fails for me.
fil3s said:
I just use flashtool and never have problems
I would start fresh with flashtool. Check only* the boxes 'wipe device' and 'force flash partitions'
When you want to update, use flashtool with none of the boxes checked. Get the boot.img file from the factory image, patch it, boot it then direct install. Never fails for me.
Click to expand...
Click to collapse
Simpel as that . i do it also that way
Related
I have a Yakju Maguro which is currently running JOP40D. I recently installed the ClockWorkMod v6.0.2.3 recovery, and rooted my phone. Now I received the notification for the 4.2.2 OTA update, but as expected CWM gives me an error when attempting to install it. It says "Install Untrusted Package?" and gives me Yes or No as options. Until now, I've always been weary to try the Yes option, so I've always gone for No, and the update obviously didn't install.
So my question is, will it actually work if I select Yes? And if it doesn't, in what condition will my phone be after it fails? Will it boot into the old OS, or will I have to manually re-flash a ROM?
I've tried googling the problem but no one seems to be facing the same exact condition as me. Eveyone reports that the installation simply fails with CWM, and I've never seen any mention of a Yes/No prompt. Also, I haven't found any thread that mentions in what condition the phone will be after the failure, so I'm trying to figure out what's going on.
In addition, I've manually downloaded the "07501b11ad3b.signed-yakju-JDQ39-from-JOP40D.07501b11" zip file from the Google website. Will I be able to flash that instead from CWM, make things simpler?
Thanks for any help.
It's been some time since I've done this so I'm hoping someone can point me in the right direction. I've had my Pixel 2 XL for like a month now...but since day one I've gotten occasional force closes of various apps. Well next week I'm going with a new carrier (Koodo here in Canada) and I thought it would be a great time to flash a factory image to make sure everything is correct. Also when does Google release monthly updates? Is it the first week of April, maybe I'll just wait and flash that factory image when it comes out. Thanks for the help.
acheney1990 said:
It's been some time since I've done this so I'm hoping someone can point me in the right direction. I've had my Pixel 2 XL for like a month now...but since day one I've gotten occasional force closes of various apps. Well next week I'm going with a new carrier (Koodo here in Canada) and I thought it would be a great time to flash a factory image to make sure everything is correct. Also when does Google release monthly updates? Is it the first week of April, maybe I'll just wait and flash that factory image when it comes out. Thanks for the help.
Click to expand...
Click to collapse
If your wanting to flash a factory image, you'll need a few things first.
I would highly recommend that you look over the linked thread carefully. It has many links and tips to help you on your way :good:
https://forum.xda-developers.com/pixel-2-xl/how-to/guide-unlock-flash-root-pixel-2-xl-t3702418
acheney1990 said:
It's been some time since I've done this so I'm hoping someone can point me in the right direction. I've had my Pixel 2 XL for like a month now...but since day one I've gotten occasional force closes of various apps. Well next week I'm going with a new carrier (Koodo here in Canada) and I thought it would be a great time to flash a factory image to make sure everything is correct. Also when does Google release monthly updates? Is it the first week of April, maybe I'll just wait and flash that factory image when it comes out. Thanks for the help.
Click to expand...
Click to collapse
https://developers.google.com/android/images
Make sure you have the latest adb and fastboot. Get them from Google...
Go get the latest image and Unzip it. Do not Unzip the folder inside. Move everything you just unzipped into the folder with adb and fastboot.
Now, if you've unlocked and unlocked critical, great. If you haven't unlocked critical, you'll have to. The system image won't install if the bootloader is out of date. Sadly, this will wipe your data.
If both are already unlocked, then open the flash-all file with a text editor and remove the,"-w" and the space preceding, then save the file. Removing the -w will keep your data. Run the flash-all.bat file and in about 10 minutes everything will be flashed.
back to stock
how to back on stock ....i sell the phone and want all stock...no root no boot loader unlocked ...what is the fastest way pls
lomski said:
how to back on stock ....i sell the phone and want all stock...no root no boot loader unlocked ...what is the fastest way pls
Click to expand...
Click to collapse
First thing!! Forget fast!! You need to fastboot flash a full factory image with the -w still in the script. Maybe even do it twice. Then go in and do a factory reset from the OS for good measure. Once that is done and you know it reboots you can go through the locking command. I would NOT toggle the OEM switch in dev though.
Sent from my Pixel 2 XL using XDA Labs
So this has been a a very frustrating experiance but I think I've got everything working again. I don't know how many times I've flashed different factory images and then tried to install TWRP and then install a new custom rom. So I want to explain all of the steps I took (if I remember them all).
0. I couldn't boot into my system but had TWRP installed. At this point I should have tried to get all my data from the sd card via "adb pull /sdcard" .
1. I didn't find any option to fix my system. So I followed this guide to install a factory image (link).
3. I skipped through all of the setup processes and gave my phone wifi. Then I went into the system and did a factory reset.
4. After skipping thourgh the setup again I enabled adb and bootet into the bootloader "adb reboot bootlader"
5. From the bootloader I booted into TWRP by "fastboot boot twrp-3.3.0.0-taimen.img. In the recovery I set the display time out to 300s because for some reason once the phone timed out I could get into twrp any more and the screen stayed black.
6. I transferred the twrp installer and my rom by " adb push TWRP_installer.zip /sdcard/Download" and " adb push ROM.zip /sdcard/Download"
7. I first added the TWRP installer to the flash queue and then I added the rom and then falshed them both. This allowed me to install the rom.
8. For some reason TWRP was not installed. So repeat step 5 and only flash the TWRP_installter.zip
Problems I had:
- In twrp I often got errors that said unable to mount system or vendor. I decided to ignore the error but this thread might help
- Installing TWRP while the stock rom is installed led to the problem that touch didn't work in TWRP
- Entering a pin for the stock rom and then installing TWRP led to TWRP asking for a pin to decrypt my data. Apparently this is not the case if you use a stock image which is older
After flashing stock ROM ota and twrp installer zip the only way to get TWRP to respond to touch is if you disable screen lock and connect to your PC before booting TWRP.
I've found the most reliable way to flash factory images is do it manually with fastboot, latest platform tools installed and a Linux OS like Ubuntu or pop os.
But first do some research and get comfortable with fastboot commands. And dear god don't relock your bootloader unless you're ?% sure it's totally stock.
@schpongo,
Also, a good point to keep when flashing via TWRP is to flash/install ONE AT A TIME. As per the great @Az Biker, you should even reboot to the bootloader after each subsequent flash/install. So, in your case, it seems that you might/should be rebooting to the bootloader three times; one for TWRP installation, one for flashing the custom ROM, and one more for any other subsequent installation (i.e. custom kernel or custom font)...
Also, as it's been said before, but stock kernel doesn't play nice with touch commands on TWRP, and (usually) the only way around it is to reboot into bootloader using the adb command -- as opposed to holding the volume-down button or from an app.
I know you figured this all out already, but it might bear repeating just in case you didn't know and/or to help any other users here...
Hi guys,
I'm having trouble with my A2 Lite. Right after unboxing the phone I installed Magisk as described in the guide (https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-device-t3825626), which worked like a charm. Today, I wanted to install a OTA security update. After the update was downloaded I got an error and I remembered that I had to "uninstall" Magisk, as described in "step a" of the guide. So I did exactly as described in the guide. After Magisk was "uninstalled" I closed the app and tried again to install the OTA security ("step b") update. Unfortunately I got the same error message again ("Can't install update"). So I thought f*** it - I skipped "step b" and proceeded to "step c" and installed Magisk into an empty slot. After that I hit "reboot" and now my phone's in a bootloop :-/
bootloader is unlocked, oem unlock and debug usb are activated. I'm able to enter fastboot, but no recovery, whatsoever.
Is there any way to fix this?
just letting you guys know that "fastboot set_active b" did the trick. I don't know what the hell went wrong though. I did everything according to the guide, except for trying to update the ota update (and failing) before uninstalling Magisk.
Now, the phone is booting correctly, but I still can't install the ota update. it says "Couldn't update" and "Installation problem". What the heck...
lunatikk said:
just letting you guys know that "fastboot set_active b" did the trick. I don't know what the hell went wrong though. I did everything according to the guide, except for trying to update the ota update (and failing) before uninstalling Magisk.
Now, the phone is booting correctly, but I still can't install the ota update. it says "Couldn't update" and "Installation problem". What the heck...
Click to expand...
Click to collapse
This is probably due to the root as it modified the system partition. Check the thread regarding on how to update without losing root.
fake__knv said:
This is probably due to the root as it modified the system partition. Check the thread regarding on how to update without losing root.
Click to expand...
Click to collapse
Could you explain further? Will flashing the stock boot.img fix the issue and will I lose all data on the phone after flashing the boot.img?
thanks
lunatikk said:
Could you explain further? Will flashing the stock boot.img fix the issue and will I lose all data on the phone after flashing the boot.img?
thanks
Click to expand...
Click to collapse
Please go see my guide, I just added a troubleshooting section that you should check:
https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-proper-support-ota-t3836952
Your feedback could improve it further.
No, flashing boot.img will not erase any data on the phone. But you must remove any PIN, password or screenlock before proceeding, or you could not access your data anymore (because of encryption).
BubuXP said:
Please go see my guide, I just added a troubleshooting section that you should check:
https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-proper-support-ota-t3836952
Your feedback could improve it further.
No, flashing boot.img will not erase any data on the phone. But you must remove any PIN, password or screenlock before proceeding, or you could not access your data anymore (because of encryption).
Click to expand...
Click to collapse
Hi BubuXP
I followed your troubleshooting guide and flashed the boot.img as instructed. Flashing the boot.img didn't do the trick so I continued with flashing the system.img. I checked for the correct build no. of course and for both boot.img and system.img the active slot "b" was chosen. After flashing the system.img I got stuck at a bootloop. I tried to set the active slot to "a", but that didn't help either: Now it wasn't in a bootloop anymore, but it was stuck at the boot animation (horizontal beam) loading forever. After 10 minutes I tried to restart - still the same problem.
What's going on here??
edit:
I flashed daisy_global_images_V9.6.4.0.ODLMIFF_20180724.0000.00_8.1_4afd3431a2 using MiFlash and the "Save user data" option. It was flashed successfully. However, when I start the phone it askes for a password and won't boot up into android if not entered. What the hell...? I deactivated my screenlock pin before I started all this. Is there a default password or what's the problem here?
regards
lunatikk said:
Hi BubuXP
I followed your troubleshooting guide and flashed the boot.img as instructed. Flashing the boot.img didn't do the trick so I continued with flashing the system.img. I checked for the correct build no. of course and for both boot.img and system.img the active slot "b" was chosen. After flashing the system.img I got stuck at a bootloop. I tried to set the active slot to "a", but that didn't help either: Now it wasn't in a bootloop anymore, but it was stuck at the boot animation (horizontal beam) loading forever. After 10 minutes I tried to restart - still the same problem.
What's going on here??
edit:
I flashed daisy_global_images_V9.6.4.0.ODLMIFF_20180724.0000.00_8.1_4afd3431a2 using MiFlash and the "Save user data" option. It was flashed successfully. However, when I start the phone it askes for a password and won't boot up into android if not entered. What the hell...? I deactivated my screenlock pin before I started all this. Is there a default password or what's the problem here?
regards
Click to expand...
Click to collapse
Sorry, but I don't know anything about that. It's an encryption problem, and that's why I hate data encryption on the phone: my data is not so important to be protected when some hackers physically stole my phone, it's only a nuisance when things like this happens.
I can only suggest to change the active slot, maybe with this you can resolve.
I will also update my troubleshooting section of the rooting guide to make the data backup as the first option to be safe.
If you can sacrifice the data, you can simply format the data partition via fastboot or reflash using the flash_all.bat script.
BubuXP said:
Sorry, but I don't know anything about that. It's an encryption problem, and that's why I hate data encryption on the phone: my data is not so important to be protected when some hackers physically stole my phone, it's only a nuisance when things like this happens.
I can only suggest to change the active slot, maybe with this you can resolve.
I will also update my troubleshooting section of the rooting guide to make the data backup as the first option to be safe.
If you can sacrifice the data, you can simply format the data partition via fastboot or reflash using the flash_all.bat script.
Click to expand...
Click to collapse
I also thought that it had something to do with encryption. In the security menu, where I turned off the display lock, it said that the phone is encrypted. However neither pin nor fingerprint could unlock the phone.
I had to go for ultima ratio and flash my device with the newest fastboot image and miflash (save user data option didn't work either, btw.).
I lost all data on the device, but now everything works fine and the OTA update also ran through without any issues.
Now, I'm not sure if I will fiddle with magisk again. I really don't have no clue about what went wrong at all...
Thanks
lunatikk said:
I also thought that it had something to do with encryption. In the security menu, where I turned off the display lock, it said that the phone is encrypted. However neither pin nor fingerprint could unlock the phone.
I had to go for ultima ratio and flash my device with the newest fastboot image and miflash (save user data option didn't work either, btw.).
I lost all data on the device, but now everything works fine and the OTA update also ran through without any issues.
Now, I'm not sure if I will fiddle with magisk again. I really don't have no clue about what went wrong at all...
Thanks
Click to expand...
Click to collapse
Thanks for sharing.
Maybe something to try for next time to restore data, I don't know.
I haven't tested yet but I did make a backup using the method explained here
https://9to5google.com/2017/11/04/how-to-backup-restore-android-device-data-android-basics/
I have yet to try (or need) the restore function but running that backup created a 6gb file. My understanding is this is the majority of your apps, data, messages, etc
Without twrp I was hesitant to root but with the bit of knowledge and files shared here so far I have moved forward and glad I did. I haven't had to flash the stock image yet but hopefully this backup helps ease the pain. It is nice to be able to modify at will
BubuXP said:
Please go see my guide, I just added a troubleshooting section that you should check:
https://forum.xda-developers.com/mi-a2-lite/how-to/guide-install-magisk-proper-support-ota-t3836952
Your feedback could improve it further.
No, flashing boot.img will not erase any data on the phone. But you must remove any PIN, password or screenlock before proceeding, or you could not access your data anymore (because of encryption).
Click to expand...
Click to collapse
Had the same problem. I tried to install the OTA of March, followed the guide to install OTA with Magisk, but after unistalling Magisk, i tried to install the OTA but it gave me this message "installazione riprenderà automaticamente quanto il dispositivo non sarà attivo";
I looked for some help online, but didn't find anything, so skipped to the point c, and i got this bootloop now.
I tried the "set_active b" command, but I'm still in bootloop. I tried to flash the stock rom but apparentrly it's impossible to do it without recovery (which I'm unable to open), so... Help?
EDIT: By using miFlash and using the flash_all command I flashed the most updated ROM I found on MIUI.en, which is the january's one. It worked, even if the build version (10.0.3) is different from the one I had previously (10.0.4). The system says that there's an available update, but i'm too afraid to try it. Suggestion are accepted!
Coming from a Pixel 3 XL, which has been rooted since I got it (same with the Pixel XL before it). I tried fastboot boot magisk_patched (used 23011 as suggested in another post) I get a boot failure, and it kicks me back into fastboot. If I do the /vbmeta command, then I get the "can't load Android System, your data may be corrupt" error. If I sideload the OTA (latest on the Google website, not the day one patch), I can get back into Android, but still unrooted. I was rooted once, pretty sure I just flashed the modified boot.img, then installed in Android, but I wanted to see if I could root via the OTA, and here we are again. I did find this website, however, I'm concerned if I use the fastboot -w command, won't that wipe the device again? I've already lost a lot of stuff from my Pixel 3 XL due to negligance on my part (deleting files after I thought I was setup, then completely wiped the old phone), so I'd rather not do a 4th setup if possible.
[CLOSED] Firmware is out! Get your root on!
Update 12/15/21: Magisk 23016 incorporates fixes for vbmeta header patching; disabling verity/verification is no longer necessary. Update and root should work as it always has - simply patch and flash the boot image. Any update method can be...
forum.xda-developers.com
PERMANENT ROOT CURRENTLY REQUIRES A DATA WIPE.
KiLLiNGDAY said:
[CLOSED] Firmware is out! Get your root on!
Update 12/15/21: Magisk 23016 incorporates fixes for vbmeta header patching; disabling verity/verification is no longer necessary. Update and root should work as it always has - simply patch and flash the boot image. Any update method can be...
forum.xda-developers.com
PERMANENT ROOT CURRENTLY REQUIRES A DATA WIPE.
Click to expand...
Click to collapse
so each OTA/monthly patch I have to wipe my phone? That'll get old super fast. I already wiped it once when I first rooted...
Tmender said:
so each OTA/monthly patch I have to wipe my phone? That'll get old super fast. I already wiped it once when I first rooted...
Click to expand...
Click to collapse
It appears so, at least at this point. Maybe people will find a way to circumvent this.
Even though - with a decent root backup like swift - it shouldn't be that big a hassle, but it's troublesome for sure.
Morgrain said:
It appears so, at least at this point. Maybe people will find a way to circumvent this.
Even though - with a decent root backup like swift - it shouldn't be that big a hassle, but it's troublesome for sure.
Click to expand...
Click to collapse
swift? Here I've been using Titanium Backup for years...
check out and decide:
https://www.reddit.com/r/androidapps/comments/gvdnf1
The past few years, I usually install the ota manually on my pixels if they don't come right away on my phone (they usually do in CA). I keep my bootloader unlocked (just in case things go haywire) but haven't modified or rooted in many years. So today, because the update was so large (more reasoning below), I decided to flash the factory image and remove the "-w" command so it wouldn't wipe the phone. Done this many times.
So my usual process is to flash both slots one after the other. I flashed the current slot it was on (b) then switched to the (a) slot. Been doing the same since Android 4 (and A9 for a/b slots), hundreds of times. After flashing slot (a), it restarted like it's supposed to. I then get the dreaded "Your device is corrupt" message. First time I've seen this on any of my 4 Nexus and 5 Pixel phones. Okay so I decided to try flash it again, this time with the wipe command (recovery wouldn't work, same message). Flashing completes, same message. Then tried the flash.android.com - flashed all slots, wiped options on - same thing. The " pixelrepair.withgoogle.com " website doesn't recognize the phone which is odd because flash.android.com does. I tried flashing the original image from November and 2 other build versions. Still no go.
Not sure what happened here. I don't think anything is wrong with the latest image. The reason I flashed this image was because I had a thought today - does flashing the "ota zip" update the bootloader and other firmware versions (they were different different versions this update). So I guess my curiosity killed the cat ... I should have just ran the ota first to see if the bootloader/radio versions updated, but of course the ota updates them (or they would never get updated otherwise). Ahh well. Now I will have to deal with the silly carrier warranty circus.
Also - I never thought an update could cause a phone to completely corrupt itself where it can't be fixed by the user. All of these posts on xda/red_dit etc over the years - I really didn't think it was possible. I always thought corruption must have been there before, but now I'm not so sure.
update: flashed the last build from November using flash.android.com and was able to get my system back. 2nd flash for that build worked.
Alekos said:
The past few years, I usually install the ota manually on my pixels if they don't come right away on my phone (they usually do in CA). I keep my bootloader unlocked (just in case things go haywire) but haven't modified or rooted in many years. So today, because the update was so large (more reasoning below), I decided to flash the factory image and remove the "-w" command so it wouldn't wipe the phone. Done this many times.
So my usual process is to flash both slots one after the other. I flashed the current slot it was on (b) then switched to the (a) slot. Been doing the same since Android 9, hundreds of times. After flashing slot (a), it restarted like it's supposed to. I then get the dreaded "Your device is corrupt" message. First time I've seen this on any of my 4 Nexus and 5 Pixel phones. Okay so I decided to try flash it again, this time with the wipe command (recovery wouldn't work, same message). Flashing completes, same message. Then tried the flash.android.com - flashed all slots, wiped options on - same thing. The " pixelrepair.withgoogle.com " website doesn't recognize the phone which is odd because flash.android.com does. I tried flashing the original image from November and 2 other build versions. Still no go.
Not sure what happened here. I don't think anything is wrong with the latest image. The reason I flashed this image was because I had a thought today - does flashing the "ota zip" update the bootloader and other firmware versions (they were different different versions this update). So I guess my curiosity killed the cat ... I should have just ran the ota first to see if the bootloader/radio versions updated, but of course the ota updates them (or they would never get updated otherwise). Ahh well. Now I will have to deal with the silly carrier warranty circus.
Also - I never thought an update could cause a phone to completely corrupt itself where it can't be fixed by the user. All of these posts on xda/red_dit etc over the years - I really didn't think it was possible. Corruption must have been there before, but now I'm not so sure.
If anyone has any fastboot tricks - I'd try anything at this point.
Click to expand...
Click to collapse
All you got to do is go to the factory image page. Click on the Android flash tool and follow that it'll bring you back
mac796 said:
All you got to do is go to the factory image page. Click on the Android flash tool and follow that it'll bring you back
Click to expand...
Click to collapse
Not sure if I wasn't clear:
Okay so I decided to try flash it again, this time with the wipe command (recovery wouldn't work, same message). Flashing completes, same message.
I tried flashing 4 different Factory Image builds (flashing manually the Factory Image not ota). The android flash tool (webiste) completes but same message appears after it restarts.
Alekos said:
Not sure if I wasn't clear:
Okay so I decided to try flash it again, this time with the wipe command (recovery wouldn't work, same message). Flashing completes, same message. Then tried the flash.android.com - flashed all slots, wiped options on - same thing. The " pixelrepair.withgoogle.com " website doesn't recognize the phone which is odd because flash.android.com does. I tried flashing the original image from November and 2 other build versions. Still no go.
I tried flashing 4 different Factory Image builds. The android flash tool completes but same message appears after it restarts.
Click to expand...
Click to collapse
You're trying to flash with fastboot right? Use that Android flash tool. You'll see a link to it in the factory image page. I went through the same thing you did, I got the corrupt device. at the very end It'll ask you to Lock the bootloader just don't do it if you want to stay unlocked.
Oh maybe I misunderstood you tried that and it's not recognizing it
mac796 said:
Oh maybe I misunderstood you tried that and it's not recognizing it
Click to expand...
Click to collapse
flash.android.com recognizes it and it completes but the corrupt message still appears.
I'm going to try the original build from October, using the flash.android.com website - and pick all the Advanced Options, see how it goes (disable verity and verification, force debuggable and flash all partitions). I guess it's worth a try. pixelrepair website doesn't recognize the phone.
Alekos said:
flash.android.com recognizes it and it completes but the corrupt message still appears.
I'm going to try the original build from October, using the flash.android.com website - and pick all the Advanced Options, see how it goes (disable verity and verification, force debuggable and flash all partitions). I guess it's worth a try. pixelrepair website doesn't recognize the phone.
Click to expand...
Click to collapse
That's no good. Hope it works out. I had a hell of a time getting mine back too
mac796 said:
That's no good. Hope it works out. I had a hell of a time getting mine back too
Click to expand...
Click to collapse
ok what the hell. what a mess. it was weird, long-pressing the power button would never restart the device. it took multiple tries. I've learned over the years to remove the case because it can hinder the restart sequence. But even just getting into fastboot was difficult.
Anyhow it looks like I'm back.
2nd time flashing this exact image, but this time it worked - I used the flash tool website and flashed the November SD1A.210817.037 (non vzw build). I just chose options "All Partitions, and full wipe"(my next step was to try disabling verity and debugging but this worked).
a few reports on red_dit of corruption on the 6 Pros. hopefully Google pulls it soon. if people don't have the "oem unlocking" option enabled, their toast.
Alekos said:
ok what the hell. what a mess. it was weird, long-pressing the power button would never restart the device. it took multiple tries. I've learned over the years to remove the case because it can hinder the restart sequence. But even just getting into fastboot was difficult.
Anyhow it looks like I'm back.
2nd time flashing this exact image, but this time it worked - I used the flash tool website and flashed the November SD1A.210817.037 (non vzw build). I just chose options "All Partitions, and full wipe"(my next step was to try disabling verity and debugging but this worked).
Lots of reports on red_dit of corruption on the 6 Pros. hopefully Google pulls it soon. if people don't have the "oem unlocking" option enabled, their toast.
Click to expand...
Click to collapse
I'm glad you got out of it
I also had the pixel 6 pro briked when I put the root of the last base.
I have revived it by putting the ota december by sideload from recovery in the adb section
victoraran said:
I also had the pixel 6 pro briked when I put the root of the last base.
I have revived it by putting the ota december by sideload from recovery in the adb section
Click to expand...
Click to collapse
so if I didn't have "OEM unlocking" enabled - I'd have a brick right now. just actually trying to help someone else that also got the corruption message and can't get back into Android to enable oem unlock. Recovery doesn't work (like my situation).
What a mess...
That's what can happen when we're inpatient and not willing to wait for the right version to actually push to the device.
Battery life is awesome, still on 44% at half 10 at night from half 6 this morning
prohibido_por_la_ley said:
That's what can happen when we're inpatient and not willing to wait for the right version to actually push to the device.
Click to expand...
Click to collapse
seriously? the right version? I installed the right version, and others also had the same issue just by updating normally through Android interface.
you shouldn't be able to "corrupt a system" just by updating to the official update build. this isn't 2012... anyway, I mostly posted and updated for others who might have had issues also.
Alekos said:
seriously? the right version? I installed the right version, and others also had the same issue just by updating normally through Android interface.
you shouldn't be able to "corrupt a system" just by updating to the official update build. this isn't 2012... anyway, I mostly posted and updated for others who might have had issues also.
Click to expand...
Click to collapse
Well in the 4 years of me being on Android I've never had it happen.
I literally just got my Pixel 6 Pro and attempted the December update and got a firmware corrupt. The only options is try again or factory reset. I just finished going through the first time setup and already got this.
JodyBreeze901 said:
I literally just got my Pixel 6 Pro and attempted the December update and got a firmware corrupt. The only options is try again or factory reset. I just finished going through the first time setup and already got this.
Click to expand...
Click to collapse
same
Alekos said:
seriously? the right version? I installed the right version, and others also had the same issue just by updating normally through Android interface.
you shouldn't be able to "corrupt a system" just by updating to the official update build. this isn't 2012... anyway, I mostly posted and updated for others who might have had issues also.
Click to expand...
Click to collapse
Why not just adb sideload the OTA image, rather then flashing on both slots the factory image? It just sounds a bit of a hassle to me.
I know, I used to fastboot flash without -w my nexuses as well, but that was before the OTA images were available.
prohibido_por_la_ley said:
Well in the 4 years of me being on Android I've never had it happen.
Click to expand...
Click to collapse
yeah it's super rare. been flashing images and ota's since Nexus 4. But it happens.
I usually get the updates right away but sometimes I'll update the ota. I usually reflash the factory image every year after the beta. just seems odd how it corrupted the device. couldn't get into the system at all (or recovery/rescue modes).
yolandabecool said:
same
Click to expand...
Click to collapse
apparantly it has something to do with Bluetooth? I don't know how, but if you can get into safe mode and disable Bluetooth, clear cache/data for it and update all your google service apps, it can fix it (keeping Bluetooth off while restarting phone in regular mode) - but I couldn't load Android.
The trick to getting into Safe Mode is this: Turn off the device. Hold down power and and as soon as you see the "G" Logo, hold volume down. it will directly boot you to Safe mode. cool little trick. you'll have to manually enable wifi because it gets turned off.
At this point, if you can, enable OEM Unlocking. at least you'll be able to save the device if anything serious happens (like what I went through). the pixel repair website also works but I couldn't get into "Rescue Mode"