So I wanted to install a CM ver on my mother's Redmi 1s and first thing I have to do is root the device right?
<image>
I have tried downloading several SuperSU.zip from multiple sources, including here at xda forums and the miui forums, to no avail.
Every single attempt has been a failure using the Stock Recovery that comes with the phone.
Fine then, I'll just use a custom recovery. I then connected the phone to my laptop via USB and used the sdk I downloaded.
After typing this line >>adb reboot bootloader, the phone booted into a screen with the fastboot bunny, all normal yes?
Then I typed >>fastboot oem unlock, but the image below doesn't show up on the phone
<image>
Instead, the command prompt just shows a few lines of the process completing
<image>
I continued to enter>>fastboot flash recovery customrecovery.img into cmd with the custom recovery image IN the platform-tools folder in sdk. Cmd again shows a few lines saying that the process completed.
<image>
However the phone still stays on the screen with the fastboot bunny, even after rebooting and then entering recovery mode, it is still the stock one. I have searched everywhere on how to root this phone but they just showed to install the SuperSU.zip using the stock recovery or the sdk method. If anyone could just help me solve this issue that would be great. If you need more information that I can provide regarding the issue feel free to ask. Thanks in advance !
P.s. Due to xda preventing me from posting outside links since I have not met the threshold, anyone who needs the pictures can message me privately.
Edit: Ah yes, I should also mention that I have tried using the stock Updater app to install the SuperSU.zip as well but that doesn't work. Also, I have tried using King Root and Kingo Root as the easy way, same thing.
Find the TWRP image for our device. I don't prefer the fastboot method; flashing TWRP and then the SuperSU zip is a whole lot more convenient as you don't need a computer.
NightRaven49 said:
Find the TWRP image for our device. I don't prefer the fastboot method; flashing TWRP and then the SuperSU zip is a whole lot more convenient as you don't need a computer.
Click to expand...
Click to collapse
But doesn't flashing TWRP without PC (with an app) requires the phone to be rooted to begin with? Or is there any workaround method?
Then use Philz recovery. There's a sticky in the general section that provides a link to such a guide using Philz. After rooting you can flash TWRP.
NightRaven49 said:
Then use Philz recovery. There's a sticky in the general section that provides a link to such a guide using Philz. After rooting you can flash TWRP.
Click to expand...
Click to collapse
Nope, still doesn't work. Tried using the stock recovery to install update.zip and also flashing the .img via sdk, both doesn't work. I'm again out of options.
before do this backup your device
you can install custom recovery with official fastboot rom.
download any official fastboot rom for your device (stable or beta does not matter)
download twrp .img file for your device
rename your recovery image file to "recovery.img"
extract the fastboot rom
go to "images" folder in extracted fastboot rom
overwrite recovery.img file with your downloaded file
flash the fastboot rom with mi flash.
wait for the installation to complete
setup your device
turn off your device and go to custom twrp recovery.
after that you can install supersu or any custom rom via twrp.
I hope you have checked this post
http://en.miui.com/thread-104048-1-1.html
For me..I started with a zip file containing the custom recovery (TWRP) it was named as Update.zip I got it from a tutorial I googled (noob, I know)...and I flashed it using stock recovery (Redmi 1s don't have locked bootloaders, I guess) and then I had Custom recovery installed..I made a backup of MIUI (it was unrooted, stock) and then flashed the CM 12.1( it was the latest then). Then there was no looking back.
Greetings. I received the OTA update (which I did not install!) on my OnePlus 5T today. I'm on OxygenOS 5.0.4 with magisk installed, phone is rooted, bootloader unlocked, stock recovery (no TWRP).
What's the right path to upgrade to 5.1.0?
I'm experienced with the command line and have no problems with it.
Based on my ideas, I think the path should be:
- Download full Oxygen OS 5.1.0 Full Zip
- Start TWRP using adb
Code:
fastboot boot
(which TWRP version?)
- Wipe dalvik and cache
- Flash the downloaded file
- Wipe dalvik and cache
- Flash magisk
That's it. Am I missing something? Do I need to reinstall magisk as specified as last step? Which TWRP version should I use (from the official website?)?
Thanks for your help :good:
Please go through the dedicated update thread that ive made for the update
https://forum.xda-developers.com/oneplus-5t/how-to/official-oxygenos-4-7-2-7-1-1-ota-t3709265
The thread has all the instructions and files needed to update. As far as twrp is concerned i recommend latest codeworkx or or bluspark recovery. The links are available on the thread.
Feel free to post on the thread if you have any further doubts.
Thanks @Funk Wizard , I read that thread (I linked it in my post) but it mentions "For Stock Non Rooted Users with Stock Recovery" and "For Rooted Users with TWRP Recovery" while in my case I'm rooted with STOCK recovery, which doesn't fit any of those 2 sentences. Which one should I follow?
As you are rooted you can flash the full zip from stock recovery that would remove root or you need follow and flash via twrp. If rooted stock recovery is no good TBH and i recommend staying on TWRP.
You can flash twrp from fastboot and then follow the instructions on the flashing post.
In case you dont need root anymore you can just flash the full zip from stock recovery. It will remove root and you will stay on stock recovery. In both the cases, use the full zip to flash via twrp or stock recovery.
No good? Please be more specific, why it's no good? From my understanding keeping stock recovery with magisk installed and bootloader unlocked allows me to pass all SafetyNet checks, which is very helpful if you don't want to deal with apps complaining that you are rooted. I can easily boot to TWRP as long as I can plug my phone into my computer by just using the fastboot command. The only downside I could see is if I brick my phone and have usb debugging disabled, I can't fastboot from adb.
Flashing TWRP would make me fail SafetyNet checks, which I'm not interested into.
After I flash the full zip, do I also need to flash the OTA update?
Thanks by the way, basically the only real "special" thing I need to do is install Magisk again after flashing.
Flashing twrp doesn't break safety net. So it's upto you if you want to stay on stock recovery with no additional benefits or on twrp.
Also, if have full time zip then you don't need to flash ota zip again.
That's good! I'll definitely flash twrp in that case.
@sshivampp Sorry to resurrect this thread, but looks like it's important. On TWRP website itself it's stated that installing TWRP would break dm-verity. What's the consequence of this? https://twrp.me/oneplus/oneplus5t.html
I have an ATT LG V40 on android 8.1. The phone is already rooted and has magisk installed. I have been unable to get TWRP installed so I can flash a custom rom. It seems that being on android 8.1 is causing issues, but I am not really sure. I followed this guide: https://forum.xda-developers.com/t/twrp-lg-v40-judypn.3970111/ and when I send the comand to flash TWRP in the command window is says the flash is finished and my phone boots up, but it doesn't seem to do anything. Any help would be greatly appreciated, thanks.
You need to use LGUP to get to 9
Noob question but did you installed and tried magisk manager(I bet you already have) and flashify(searchable on Google) (magisk manager grants root to flashify and flashify installs twrp from storage)?
Are you certain that you're booting in to recovery? Many phones have an advanced reboot menu option on the developer settings. If yours doesn't I recommend an app like Simple Reboot.
If you're not certain that it's installing the recovery correctly have you just tried installing TWRP.zip from Magisk?
dn.34 said:
I have an ATT LG V40 on android 8.1. The phone is already rooted and has magisk installed. I have been unable to get TWRP installed so I can flash a custom rom. It seems that being on android 8.1 is causing issues, but I am not really sure. I followed this guide: https://forum.xda-developers.com/t/twrp-lg-v40-judypn.3970111/ and when I send the comand to flash TWRP in the command window is says the flash is finished and my phone boots up, but it doesn't seem to do anything. Any help would be greatly appreciated, thanks.
Click to expand...
Click to collapse
Which 'command', specifically, are you typing in when you say you are 'when I send the command to flash twrp'? The only command in those directions are to boot twrp, not flash it.
After you boot it, then you need the advanced section so you can recovery ramdisk, which will inject twrp into the current boot partition (and it keeps boot intact).
If you want to use current aosp roms, then follow the 'metadata' sections as you'll need that version of twrp for those roms.
cheers
Hi all,
I have recently shifted from Samsung A52S to Onpelus 9 PRO.
I'm now a bit confused about flashing method....
I mean :
on Samsung devices, you have to use ODIN ( that is a Fastboot replacement tool ) in order to flash the TWRP and then, on TWRP, you can freely flash any new custom ROM or any other img files, by simply press "INSTALL" button instad of ADB sideload commands.
If I well understood, in order to flash this custom ROM, I have to do that through Fastboot commands before and through TWRP ADB sideload commands after......
My question is : may I flash boot.img / vendor_boot.img / dtbo.img and ROM zip directly through TWRP "INSTALL" button instead ???
If not, can someone kindly explain which is the reason why ?
Sorry for this noob question but I'm doing my first step into Oneplus and I don't want to do a mess.....
Many thanks for the help !
I personally been wanting to know why we no longer can simply flash custom roms via TWRP like we use to. I do believe its got to do with the way the A/B partition works however that does not really answers why we can't just flash via TWRP. Unfortunately, I have not been able to find the answer so I am interested too on why we can't simply flash custom roms in TWRP and have to resort in sideloading or via fastboot. I would think flashing via a zip in TWRP will have less user errors compare to using a command line to do your flashing.
Saying that, I have been flashing via fastboot since I got this phone and even though its a longer process, it only takes a few more minutes.
twrp is not even fully adapted for android 12 or 13 (but who needs twrp anymore?)
I prefer to flash via fastbootd
(is less work for me)
best way is the magisk install
ChrisFeiveel84 said:
twrp is not even fully adapted for android 12 or 13 (but who needs twrp anymore?)
Click to expand...
Click to collapse
twrp is still the only way to backup the whole rom
it exist a non official version for 12/13
TWRP is the best tool to recover files when the OS does not boot. Since there is no ROM or kernel out there that recommend or uses TWRP for flashing. There is little reason to use TWRP unless is for file recovery. This is in respective to OP 9.
I successfully unlocked my bootloader, then I tried flashing the twrp by following munchy's tutorial from YouTube (as someone recommended here). I also used the twrp recovery file he provided in the description, by using the latest platform tools from the official website. It was going pretty good. I even got the TeamWin logo, and also loaded up the twrp interface, and was able to navigate through it. But the problem was my internal storage wasn't showing up. So I booted back to my system normally to see If I can find a solution. Then I think I tried again after restarting to see if it fixes itself, but the same problem was persisting. The next time when I tried again, I used the latest twrp version which I downloaded from the official twrp website.
But since my 3rd attempt, I am not able to see any TeamWin recovery come up on my phone, when I connect I do the "fastboot boot (twrp filename)" command in cmd. When I do the command, nothing shows up. The device remains in the Fastboot mode, or just turns off. When I switch it back on, It turns on normally and boots into the phone without any issues, and I can use it. I've tried switching back to the original twrp version munchy used in the above linked video, but same result.
What did I do wrong here? How do I make my phone get into the twrp recovery when I enter the fastboot boot (twrp filename) command thru my PC? How do I make my Internal Storage available to view int he TWRP recovery so I can install it from my Downloads folder? I am on MIUI 14.0.4 If that helps. My end goal is to install Magisk.
Any tips/guides/suggestions are appreciated.
Installing TWRP and root does not erase your data.
Remove security from the lock screen. (decryption).Normally the latest TWRP decrypts the data.
Install Platform tools ,put the TWRP in the folder and run the commands from the folder.
TWRP SKK, Use A12 if your system is in A12/A13 if system A13.
Rename it to twrp.img
CMD
fastboot boot twrp.img
Powershell
./fastboot boot twrp.img
Once booted, go to Advanced -> Press "Flash current TWRP"
If offered, both slots.
NOSS8 said:
Installing TWRP and root does not erase your data.
Remove security from the lock screen. (decryption).Normally the latest TWRP decrypts the data.
Install Platform tools ,put the TWRP in the folder and run the commands from the folder.
TWRP SKK, Use A12 if your system is in A12/A13 if system A13.
Rename it to twrp.img
CMD
fastboot boot twrp.img
Powershell
./fastboot boot twrp.img
Once booted, go to Advanced -> Press "Flash current TWRP"
If offered, both slots.
Click to expand...
Click to collapse
Thank you. I had put backed the screen lock after the first 2 attempts because someone said to to that on a YT video after they faced the same problem. Now I tried again by removing the screen lock and the latest twrp for my device also boots up just fine. Now the problem Is I still can't access my internal storage .
Still having removed the screen security?
Which rom(fullname)?
Which TWRP?
Try to mount storage.
NOSS8 said:
Still having removed the screen security?
Which rom(fullname)?
Which TWRP?
Click to expand...
Click to collapse
Yes, I removed the screen security, though I can enter TWRP, I can't read the internal storage. MIUI 14.0.4.
I just watched a YT video where the dude does the following:
-TWRP Recovery
- Wipe
- Format Data
- Types 'yes'
then
-TWRP Recovery
- Reboot
- Recovery
- Do not Install
After coming back to recovery after rebooting, he gets a pop up, which at the swipe says "Swipe to allow for modifications" which he swipes, then now after checking the Internal Storage, It's readable now. Is this a possible solution?
Twrp A13, obviously if you don't want to keep the data.
Twrp/wipe format data type yes/reboot TWRP.
If error red lines, reboot TWRP and repeat the operation.
Sideload roms or use OTG.
NOSS8 said:
Twrp A13, obviously if you don't want to keep the data.
Twrp/wipe format data type yes/reboot TWRP.
If error red lines, reboot TWRP and repeat the operation.
Sideload roms or use OTG.
Click to expand...
Click to collapse
what's twrp A13? Also, I just unlocked my bootloader a few hours ago, so my phone has already done a factory reset and i don't have anything to lose except the Magisk APK and .img file in my phone.
But I have a question, will doing the format data just do a factory reset, or will I lose my ROM? Because I'm not trying to install a custom ROM, I just want to Install Magisk as the end goal with my current ROM.
MIUI 14 Android 13 so use this TWRP
plugged the phone into the PC when it is on the TWRP, you will have access to the internal storage. (works on my 12 pro aves twrp A13 Skk).
twrp-3.7.0_12-v7.5_A13-alioth-skkk.img
I'm using the latest one I could find on the TWRP website for my device. Not aware If it supports Android 13 though as it isn't mentioned on the website. Just asking my prev question, will doing the format data from TWRP just do a factory reset, or do I lose the ROM and will have to install a custom ROM?
second question I forgot to ask in my prev post, after i do the format data and put the Magisk APK and twrp img file again on my device, will my device stay decrypted as I formatted the data, or will the problem persist?
sorry If i sound dumb
zoinksy said:
I'm using the latest one I could find on the TWRP website for my device. Not aware If it supports Android 13 though as it isn't mentioned on the website. Just asking my prev question, will doing the format data from TWRP just do a factory reset, or do I lose the ROM and will have to install a custom ROM?
second question I forgot to ask in my prev post, after i do the format data and put the Magisk APK and twrp img file again on my device, will my device stay decrypted as I formatted the data, or will the problem persist?
sorry If i sound dumb
Click to expand...
Click to collapse
Use this TWRP(officiel).
twrp-3.7.0_12-v7.5_A13-alioth-skkk.img
thank you, this is the one I was looking for. Sorry to bother you again, now I installed the Magisk V26.1 apk from TWRP. And when I boot back to system and try opening the magisk manager, this happens. It says downloading, forever. I think I shouldn't have directly downloaded the latest version. So probably have to downgrade it a bit. For that, what will I have to do?
Can I just hold the Magisk icon, and uninstall it simply like any other app? Or do I have to do it from the TWRP? Also, Is it necessary for me to uninstall it before downgrading, or can I just download the apk of older magisk version and flash it from twrp just like I did previously?
It was on my first post.
Installation
The Magic Mask for Android
topjohnwu.github.io
TWRP + Root
Hi all. Hope you are good and safe from Covid-19. If you like TWRP as your recovery and want to keep root access as well, I am going to show you how to do that. Because if you take the stock boot.img and patch it via magisk, you will lose TWRP...
forum.xda-developers.com
Try OrangeFox. I never had problems with it. Been using it for half a year and constantly flash new ROM builds as a tester
Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40 (alioth) build releases | OrangeFox Recovery Downloads
Orangefox recovery for Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40 (alioth)
orangefox.download
cyanGalaxy said:
Try OrangeFox. I never had problems with it. Been using it for half a year and constantly flash new ROM builds as a tester
Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40 (alioth) build releases | OrangeFox Recovery Downloads
Orangefox recovery for Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40 (alioth)
orangefox.download
Click to expand...
Click to collapse
Sure, but currently only in A12.
NOSS8 said:
Sure, but currently only in A12.
Click to expand...
Click to collapse
I use ArrowOS 13
cyanGalaxy said:
I use ArrowOS 13
Click to expand...
Click to collapse
I don't doubt it, the Twrp A12 also works for certain operations on an A13 system but for certain Miui roms some bootloop.
NOSS8 said:
I don't doubt it, the Twrp A12 also works for certain operations on an A13 system but for certain Miui roms some bootloop.
Click to expand...
Click to collapse
Hm ok.
Welp for me on AOSP, it works nicely. I flash a new build (or two) every week. Backup/Restore works as should. UI is nice and modern, imo better than TWRP. That's why I'm recommending it.
Haven't heard anyone saying that they can't view Phone storage on OrangeFox.
Hi,
@NOSS8 , I'd like to ask : I've only some hours to wait to unlock the BL. But one question, as it's yet the stock rom (FW V13.0.11.0, A12), wich twrp should I use ? I want to install a A13 rom (that supposes FW V 14.xxx !)
So :
- fastboot boot twrp (but wich one ?? A12 or 13 ?? ; skkk ? Or ?) (+ "flash current twrp" OR "install it in ramdisk"?)
- reboot recovery
- flash FW V14.xxx
- flash rom
- format data
- reboot system
- flash magisk (last version ? Seems to be 'big' changes ?)
- flash what I need (V4A, DFE (??), ....)
What do you think ?
Thanks a lot ! Main question is about what version of twrp.. Help will be very appreciated !
néonaloj said:
Hi,
@NOSS8 , I'd like to ask : I've only some hours to wait to unlock the BL. But one question, as it's yet the stock rom (FW V13.0.11.0, A12), wich twrp should I use ? I want to install a A13 rom (that supposes FW V 14.xxx !)
So :
- fastboot boot twrp (but wich one ?? A12 or 13 ?? ; skkk ? Or ?) (+ "flash current twrp" OR "install it in ramdisk"?)
- reboot recovery
- flash FW V14.xxx
- flash rom
- format data
- reboot system
- flash magisk (last version ? Seems to be 'big' changes ?)
- flash what I need (V4A, DFE (??), ....)
What do you think ?
Thanks a lot ! Main question is about what version of twrp.. Help will be very appreciated !
Click to expand...
Click to collapse
Instead, use Miflash with a Fastboot rom, you can extract the boot img for root.(don't re lock the bootloader).
You can root without TWRP, but according to this thread, if you root you lose the TWRP and vice versa, I don't know if this is still relevant.(I don't have this device).
If you need ,install the TWRP A13 after flashing the A13.
See this thread for instructions
[Recovery] [13] [12] TWRP & OrangeFox
Since recoveries play a crucial role in flashing firmwares, custom ROMs and offline updates, it is of importance to have access to them. This post is about sources and instructions to working versions of recoveries for Alioth. Platform Tools (aka...
forum.xda-developers.com
***Note:
Use the TWRP SKKK.
Advantage with Miflash, the Fastboot roms contain all the imgs.
EDIT:
omitted link
TWRP + Root
Hi all. Hope you are good and safe from Covid-19. If you like TWRP as your recovery and want to keep root access as well, I am going to show you how to do that. Because if you take the stock boot.img and patch it via magisk, you will lose TWRP...
forum.xda-developers.com
NOSS8 said:
Instead, use Miflash with a Fastboot rom, you can extract the boot img for root.(don't re lock the bootloader).
You can root without TWRP, but according to this thread, if you root you lose the TWRP and vice versa, I don't know if this is still relevant.(I don't have this device).
If you need install the TWRP A13 after flashing the A13.
See this thread for instructions
[Recovery] [13] [12] TWRP & OrangeFox
Since recoveries play a crucial role in flashing firmwares, custom ROMs and offline updates, it is of importance to have access to them. This post is about sources and instructions to working versions of recoveries for Alioth. Platform Tools (aka...
forum.xda-developers.com
***Note:
Use the TWRP SKKK.
Advantage with Miflash, the Fastboot roms contain all the imgs.
Click to expand...
Click to collapse
I'm very greatfull for your quick reply ! Thanks
The device is too a Poco f3, sorry.. This doesn't need to flash magisk for twrp to stick (I had another one I've broken)
But I don't understand what's the advantage to first flash a fastboot rom..? As you say to flash twrp would loose root and vice versa... (I've read the thread you're talking about ofox)
So I wanted to go trough +- the way I mentionned, as A13 as well as ofox 'seems' to work (but I'm carefull with that twrp on stock MIUI A12, and I never used ofox..)
So you do think it's a bad idea ?? The rom I want to flash is crdroid.
I'm more lost now ...
Thanks again !