Question Can't use fingerprint in any recent android 13 roms - Xiaomi Poco F3 / Xiaomi Mi 11X / Redmi K40

as the tittle says, I can't use the fingerprint in any of the latest roms, I tried evolution-x, pixel experience, pixel experience plus and Pixel os, if I go back a few versions in evolution-x, it works again, if I update, dirty or clean, it does not work again, I can register the fingerprint but it does nothing in the lock screen, as if no fingerprint was registered, any help?

Try doing factory reset from settings after clean flashing a recent rom

mi_guel said:
as the tittle says, I can't use the fingerprint in any of the latest roms, I tried evolution-x, pixel experience, pixel experience plus and Pixel os, if I go back a few versions in evolution-x, it works again, if I update, dirty or clean, it does not work again, I can register the fingerprint but it does nothing in the lock screen, as if no fingerprint was registered, any help?
Click to expand...
Click to collapse
I have found that when things start acting up, restoring my F3 to almost original Miui Firmware has always fixed my issues,
you could look at my post,
[A13]Evolution X for POCO F3/Mi 11x[alioth][OFFICIAL]
Evolution X 7.0 for the POCO F3 [alioth] /* * Your warranty is void. Or vaild, probably? * * I am not responsible for bricked devices, dead SD cards, Ebolation X, * thermonuclear war, or the current economic crisis caused by you following *...
forum.xda-developers.com
I hope you sort it,
Evolution-X V7.3 what an amazing rom.

Fingerprint Support is dependend on the Firmware. Use the latest Firmware version available, or the version that's specified by your Custom ROM maintainer.
Firmware can be found on xiaomifirmwareupdater.com
Don't confuse Firmware with ROMs on that website, the Firmware weighs only about ~150 MB

Related

[RECOVERY] [TWRP] [3.3.1-x] [RMX1921] Official/Unofficial TWRP for Realme XT

Team Win Recovery Project 3.x is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
By @pjgowtham and @mauronofrio
Note that two kinds of builds are available. The only difference between these builds is that one does adjust for the notch space and adds black border on top and the other TWRP shows as full screen.
Features:
- Temporarily disabled compatibility.zip check to allow flashing stock ROMs
- Ozip decryption
- Device data decryption
- Reboot to EDL
- Full android 9/10 support
and everything a TWRP usually does.
Release 02/02/20
- Updated kernel to android 10
- Updated blobs to android 10
Release 03/02/20
- Device data decryption support added
Release 04/02/20 (stable build)
-Disabled compatibility zip check to allow flashing stock ozip.
Release 08/02/20
- Added TWRP theme for notched devices (thanks to @mauronofrio)
Release 12/02/20[/B][/U]
- Added dtbo.img to the recovery so that it can support both Android pie and 10 firmware
Release 29/02/20
- Added the ability to backup, restore and flash persist partition
- Added the ability to backup, restore internal storage
Bugs :
None
XDA:DevDB Information
TWRP, Tool/Utility for the Realme XT
Contributors
pjgowtham, mauronofrio, thesprintster
Device Tree
https://github.com/pjgowtham/device_realme_RMX1921
https://github.com/mauronofrio/device_realme_RMX1921
Download Link
Stable build : 12/02/20
https://androidfilehost.com/?w=files&flid=304993
@mauronofrio s TWRP builds are included too.
FAQ :
Refer wiki here :,
https://forum.xda-developers.com/realme-xt/how-to/guide-unlocking-unbricking-custom-t4045505
Version Information
Status: Stable
Created 2020-02-02
Last Updated 2020-03-29
Thanks for your afford
can i flash magisk with this twrp and root andriod 10?
Data Decryption doesn't work.
If you can add it, it would be perfect.
ashruz.ash said:
Data Decryption doesn't work.
If you can add it, it would be perfect.
Click to expand...
Click to collapse
Should be fixed in the next build
sonu0070 said:
Thanks for your afford
can i flash magisk with this twrp and root andriod 10?
Click to expand...
Click to collapse
Yes, just remember to flash vbmeta immediately after you flash the magisk otherwise it will show recovery destroyed error
pjgowtham said:
Yes, just remember to flash vbmeta immediately after you flash the magisk otherwise it will show recovery destroyed error
Click to expand...
Click to collapse
Thanks for reply can you send me link of vbmeta
I am confused which one should I flash.
sonu0070 said:
Thanks for reply can you send me link of vbmeta
I am confused which one should I flash.
Click to expand...
Click to collapse
You would be okay with los vbmeta or any vbmeta for that sake. Just use the flags before flashing. I added FAQs in the original post just now.
EDIT:
Seems like there's issues with vbmeta. Use the vbmeta that's pinned on the wiki
pjgowtham said:
You would be okay with los vbmeta or any vbmeta for that sake. Just use the flags before flashing. I added FAQs in the original post just now.
EDIT:
Seems like there's issues with vbmeta. Use the vbmeta that's pinned on the wiki
Click to expand...
Click to collapse
Hi,
How did you unlock Realme XT with Android 10(realme UI) ...the Deeptesting app isnt working for unlock bootloader
Is there Process for Android 10 unlock before we flash TWRP and vmbeta img from other blog ?
Regards,
Diaz M
diazneoones82 said:
Hi,
How did you unlock Realme XT with Android 10(realme UI) ...the Deeptesting app isnt working for unlock bootloader
Is there Process for Android 10 unlock before we flash TWRP and vmbeta img from other blog ?
Regards,
Diaz M
Click to expand...
Click to collapse
Please refer the wiki. You should unlock on pie itself. That way you have unlocked bootloader on 10.
Why there is no 10 based custom roms for xt? Can't devs can port custom roms of realme x to xt atleast? The fingerprint issues are already solved, right?
ashruz.ash said:
Why there is no 10 based custom roms for xt? Can't devs can port custom roms of realme x to xt atleast? The fingerprint issues are already solved, right?
Click to expand...
Click to collapse
A week back we didn't have a wiki page, a backup of the stock recovery, a stable twrp. It's only been a week now since these work were done. On top of it, realme is not very proactive with the kernel sources. But its only a matter of time since we bring up lineage 17.1 or pixel experience. We are working on it.
Good to hear.
Backup taken via TWRP failed fr system image..this happens for both stock rom and custom rms too..has anyone taken successful backup
I get following error when flashed stock rom of Color OS ior RUI in TWRP
failed to mount /dev/block/bootdevice/by-name/userdata at /data
diazneoones82 said:
Backup taken via TWRP failed fr system image..this happens for both stock rom and custom rms too..has anyone taken successful backup
Click to expand...
Click to collapse
Try the latest build maybe
Do you have the indian variant of the device or something else?
Can i flash it on rui c.03
Samrra said:
Can i flash it on rui c.03
Click to expand...
Click to collapse
No u need to unlock your boorloader 1st kindly reas it. It doesnt work in realme ui
My twrp realme xt back to stock recovery...how to solve it?
Samrra said:
Can i flash it on rui c.03
Click to expand...
Click to collapse
Yes you can flash even on the yet to be released C.04
krizhiel said:
No u need to unlock your boorloader 1st kindly reas it. It doesnt work in realme ui
Click to expand...
Click to collapse
It works on realme UI

[TREBLE][PATCH][J710X]SEMI-GSI PATCH v1.0

DISCLAIMER:
I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this patch before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
INFO:
This is a patch for fixing some bugs in semi-GSIs (MIUI, OxygenOS), in order to make them more usable for daily usage.
Which bugs are fixed?
Fingerprint scanner
Lockscreen
Flashlight toggle [MIUI GSI only]
And maybe some more bugs that arent tested yet
Supported Devices:
A320x
J530x
A600x
J600x
J701x
J730x
J710x
J600x
WARNINGS:
Only flash this zip AFTER flashing Project_SpagetX by @ananjaser1211 and sGSI.
Only use this patch on Android Pie based sGSI only. Flashing this patch on Q and newer is known to break some features.
This patch cannot be used for G610x variants! They have so many issues that renders this patch useless.
Flashing this patch on a normal GSI (AOSP, PixelExperience, etc) is useless and may cause more bugs, so don't!
Some sGSIs are too buggy to use for daily basis, even after flashing this patch. In that case, find another sGSI or compile one yourself.
SUPPORT:
In thread.
Telegram Group.
CREDITS:
Me, for writing this patch
@ananjaser1211, for his old files that fixes these bugs and his amazing work for our phones.
DOWNLOADS ARE IN POST 2
INSTALLATION:
Download the provided .zip file.
Put the .zip file inside your sdcard.
Boot into your recovery and flash the .zip file.
Wait until the flash is complete and then reboot your device.
DOWNLOADS:
Latest version
After installing this patch on J710FN WiFi stops working. Installing WiFi fix (BRUH) don't help.
ekobaltika said:
After installing this patch on J710FN WiFi stops working. Installing WiFi fix (BRUH) don't help.
Click to expand...
Click to collapse
Which GSI have you used?
bien2004official said:
Which GSI have you used?
Click to expand...
Click to collapse
sGSI MIUI10 from Erfan.
ekobaltika said:
sGSI MIUI10 from Erfan.
Click to expand...
Click to collapse
Pie or Q?
bien2004official said:
Pie or Q?
Click to expand...
Click to collapse
MIUI10 Q
ekobaltika said:
MIUI10 Q
Click to expand...
Click to collapse
Use it in Pie based sGSI only, I tested on Q and it breaks Wifi and some more things.

Root rn8pro 12.0.4

Hi everybody.
I'd like root my rn8pro european version.
But about custom ROM, i dont know différences between CFW and noCFW, so which type can i flash ? Which is the best ?
About rooting device, can i take One discussion here for root procédure ?
Thx a lot
totofe69 said:
Hi everybody.
I'd like root my rn8pro european version.
But about custom ROM, i dont know différences between CFW and noCFW, so which type can i flash ? Which is the best ?
About rooting device, can i take One discussion here for root procédure ?
Thx a lot
Click to expand...
Click to collapse
Hello!
I suggest to use this guide that helped me to root my RN8P with A9 EEA!!!
[GUIDE][BEGONIA]Unlock Bootloader, Flash TWRP and Root[PROPER]
/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in...
forum.xda-developers.com
Also im using stock A9 firmware (V11.0.3.0.PGGEUXM) because the CFW has too many bug yet.
U using A10 but atm discharge too fast the phone and there is not relevant upgrade so i suggest to downgrade.
Thx for your reply.
I'll go to watch this to do root and flash

Question How to safely update the stock rom while rooted?

I've looked over a bunch of tutorials and whatnot but i can't find a definitive guide on how to update a rooted xiaomi safely. I have a Poco F3 on MIUI 13.0.3.0 (SKHEUXM) with magisk 25.2 installed and a few modules. TWRP is not installed at the moment. I previously tried to update the phone from an older version to the current one via TWRP, but because i used the vault on the stock poco launcher i had to do a factory reset. Can I install the update via the stock updater option if my phone is rooted (with modules) and i have the stock recovery? What are the steps?
Pillow fan said:
I've looked over a bunch of tutorials and whatnot but i can't find a definitive guide on how to update a rooted xiaomi safely. I have a Poco F3 on MIUI 13.0.3.0 (SKHEUXM) with magisk 25.2 installed and a few modules. TWRP is not installed at the moment. I previously tried to update the phone from an older version to the current one via TWRP, but because i used the vault on the stock poco launcher i had to do a factory reset. Can I install the update via the stock updater option if my phone is rooted (with modules) and i have the stock recovery? What are the steps?
Click to expand...
Click to collapse
Hi,
I removed Stock MIUI as soon as the 7 days boot loader unlock was over (13 months ago) and moved to Xiaomi.eu roms, but then i found out that MIUI restricted non Xiaomi devices to be used as a trusted device, i then moved to custom roms, i am currently running the AMAZING Evo-X 7.3 rom.
Coming back to updating MIUI I would try updating via O.T.A, if this is not working then head over to Xiaomi.eu and updated via Recovery, https://sourceforge.net/projects/xi...lti_HMK40_POCOF3_22.10.26_v13-12.zip/download,.
Xiaomi.eu roms have a lot of the bloatware removed apparently and the latest updates.
To reinstall root is straight forward as long as you have fastboot, you could try my post on the Evo-X thread and use Temporary Recovery,
[A13]Evolution X for POCO F3/Mi 11x[alioth][OFFICIAL]
Evolution X 7.0 for the POCO F3 [alioth] /* * Your warranty is void. Or vaild, probably? * * I am not responsible for bricked devices, dead SD cards, Ebolation X, * thermonuclear war, or the current economic crisis caused by you following *...
forum.xda-developers.com
If you have apps that you would like to transfer onto your new rom, i would suggest that before you install a new rom and your faced with format data, to use MIGRATE-GPE (its 3 separate programs) ROOT is needed, this is free and is on google play.
I would also suggest to ditch MIUI as it is restrictive and move to the AMAZING Evolution-X rom.
I hope you sort it.
johnr64 said:
Hi,
I removed Stock MIUI as soon as the 7 days boot loader unlock was over (13 months ago) and moved to Xiaomi.eu roms, but then i found out that MIUI restricted non Xiaomi devices to be used as a trusted device, i then moved to custom roms, i am currently running the AMAZING Evo-X 7.3 rom.
Coming back to updating MIUI I would try updating via O.T.A, if this is not working then head over to Xiaomi.eu and updated via Recovery, https://sourceforge.net/projects/xi...lti_HMK40_POCOF3_22.10.26_v13-12.zip/download,.
Xiaomi.eu roms have a lot of the bloatware removed apparently and the latest updates.
To reinstall root is straight forward as long as you have fastboot, you could try my post on the Evo-X thread and use Temporary Recovery,
[A13]Evolution X for POCO F3/Mi 11x[alioth][OFFICIAL]
Evolution X 7.0 for the POCO F3 [alioth] /* * Your warranty is void. Or vaild, probably? * * I am not responsible for bricked devices, dead SD cards, Ebolation X, * thermonuclear war, or the current economic crisis caused by you following *...
forum.xda-developers.com
If you have apps that you would like to transfer onto your new rom, i would suggest that before you install a new rom and your faced with format data, to use MIGRATE-GPE (its 3 separate programs) ROOT is needed, this is free and is on google play.
I would also suggest to ditch MIUI as it is restrictive and move to the AMAZING Evolution-X rom.
I hope you sort it.
Click to expand...
Click to collapse
I guess doing a backup of the internal memory won't be a bad thing before doing the OTA update. If it works then I'm moving to some other custom ROM immediately.
Pillow fan said:
I've looked over a bunch of tutorials and whatnot but i can't find a definitive guide on how to update a rooted xiaomi safely. I have a Poco F3 on MIUI 13.0.3.0 (SKHEUXM) with magisk 25.2 installed and a few modules. TWRP is not installed at the moment. I previously tried to update the phone from an older version to the current one via TWRP, but because i used the vault on the stock poco launcher i had to do a factory reset. Can I install the update via the stock updater option if my phone is rooted (with modules) and i have the stock recovery? What are the steps?
Click to expand...
Click to collapse
UPDATE: the OTA update worked perfectly and there was no need to do any backups (although I did). Thanks @johnr64 for your help.

Question Custom ROMs

Anyone knows from Custom ROMs for this phone? Since 5.1 update seems nobody is working on ROMS here anymore ...
navi7512 said:
Anyone knows from Custom ROMs for this phone? Since 5.1 update seems nobody is working on ROMS here anymore ...
Click to expand...
Click to collapse
[Custom ROM] [One UI 5] SlimSang Rom For [ Samsung Galaxy S21 FE ] G990E/00/0B/B2
Q) what is SlimSang? A) SlimSang is a Custom ROM based on ONE UI for Samsung Galaxy S21 FE developed and Maintained by BurningLion Please read the thread carefully * Your warranty is now void. * I am not responsible for bricked devices, dead SD...
forum.xda-developers.com

Categories

Resources