Hello, I have a motog30 and currently I saw that a new twrp update came out including support for it. But it happens that when I give a, "fastboot boot twrp.img" it gives the boot is incia but Screen freezes and touches don't work on my twrp
Related
Hello there,
we have here a Swift that is stuck on a starting screen since an attempt to downgrade from Cyanogenos 13.1 to Cyanogenmod 12.1. Bootloader ist unlocked and to my knowledge only the recovery was flashed via fastboot.
As soon as the USB cable is connected, the screen goes on with "Wileyfox(with logo) powered by android" and remains there.
Luckily fastboot works, but I can't get into recovery. Neither by selecting "reboot into recovery" from fastboot nor by "Vol-" + "Power".
I tried to reflash Cyanogenos 13 via fastboot as it was suggested in several threads (i.e. unzip and flash the different files step by step). Fastboot always stated success, but no luck... Still the same starting screen.
I even tried flashing TWRP recovery, no change either.
Is there something else I can try?
Thank you all
SOLVED: I was persistent: one other threads regarding a lenovo phone suggested to hold down Power and VolDn continuously for several minutes. After about a minute or so and multiple (min. 15x) power off/ons to the "powered by android" screen, I finally got into TWRP! After a format /data I was able to flash the desired CM.
I hope this helps others with similar problems
Erdbeerfrosch said:
Hello there,
we have here a Swift that is stuck on a starting screen since an attempt to downgrade from Cyanogenos 13.1 to Cyanogenmod 12.1. Bootloader ist unlocked and to my knowledge only the recovery was flashed via fastboot.
As soon as the USB cable is connected, the screen goes on with "Wileyfox(with logo) powered by android" and remains there.
Luckily fastboot works, but I can't get into recovery. Neither by selecting "reboot into recovery" from fastboot nor by "Vol-" + "Power".
I tried to reflash Cyanogenos 13 via fastboot as it was suggested in several threads (i.e. unzip and flash the different files step by step). Fastboot always stated success, but no luck... Still the same starting screen.
I even tried flashing TWRP recovery, no change either.
Is there something else I can try?
Thank you all
SOLVED: I was persistent: one other threads regarding a lenovo phone suggested to hold down Power and VolDn continuously for several minutes. After about a minute or so and multiple (min. 15x) power off/ons to the "powered by android" screen, I finally got into TWRP! After a format /data I was able to flash the desired CM.
I hope this helps others with similar problems
Click to expand...
Click to collapse
I've got the same problem. How id you solve yours?
I did hold the VolumeDown+Power buttons for 5 minutes and I did not get into recovery at all (this was with latest TWRP version 3.1.1-0)
Then I thought it could be the TWRP version, and I tried 3.0.3-0 and finally 3.0.0-0.
After flashing 3.0.0-0 I typed "fastboot reboot" and immediately after pressed VolumeDown+Power on the phone and ... finally was in recovery mode, where I could install microG's lineageos version.
cweiske said:
I did hold the VolumeDown+Power buttons for 5 minutes and I did not get into recovery at all (this was with latest TWRP version 3.1.1-0)
Then I thought it could be the TWRP version, and I tried 3.0.3-0 and finally 3.0.0-0.
After flashing 3.0.0-0 I typed "fastboot reboot" and immediately after pressed VolumeDown+Power on the phone and ... finally was in recovery mode, where I could install microG's lineageos version.
Click to expand...
Click to collapse
hi could you post exactly what you did line by line inc code plz i have twrp 3 img just need to get it over i must be typing something wrong.
thanks
im having a problem, my phone wont go out of fast boot mode, tried everything
Any suggestions??
Here is the correct fix, at least it worked for me,
https://forum.xda-developers.com/showpost.php?p=66158015
Hello
I wanted to flash Orange Fox 9 on my redmi note 5 pro, i was on orange fox R10 (because impossible to do a simple factory reset on this recovery don't know why, the dev tried to help me but even him don't know why it don't work)
I flash it trough the recovery R10 (by flashing the recovery.img and check recovery partition in orangefox) , because in fastboot it say "anti rollback failed" but after that, my phone won't boot in recovery mode anymore.
Even if i use "fastboot boot recovery.img" it doesn't work, i tried this command with twrp (who work before but password issue) and the stock recovery miui. It won't start in recovery mode
So i tried the command "fastboot erase recovery" but it also doesn't work the "anti rollback failed" error show out.
The good news is i can still use my phone, but without recovery i can do nothing so i'm looking for a solution to recover the stock recovery of my phone
After all of that, i tried to flash twrp trough the app of the playstore, but it does nothing also. Its seems that my recovery part is corrupted and it can't be replaced by another. .
So what can i do with that, it's a pretty annoying issue..
Thanks in advance
Solution founded :
After i flashes orange fox 9, it was impossible to boot on third party recovery i think.
Because i tried one more time to boot on stock recovery and it work. But after I boot in my stock recovery i was not able to boot in my system
So I tried to go back on orangefox 10 butthere is big issue with the anti rollback and many errors in fastboot like (too many links) (file limit error). It's very hard to perform a simple fastboot because of that.
To bypass it, the phone need to be unplugged, I type the fastboot command (fastboot boot recovery.img) I press enter and fastboot show "waiting for device" and then I plug my phone.
90% of time it work. But I don't know if I let the phone plugged and I do it, it will show me an error.
Anyway, after I just format all partition on the phone then I flashed the stock rom and the phone reboot.
But impossible to factory reset in orange fox which was the original issue and don't Kno Ho to do it
I'm having problems booting into recovery with twrp installed. When I try, TWRP gets as far as showing it's splash screen, but then restarts, repeatedly re-showing the splash screen every 2-3 seconds. I can access the phone with adb while this happens, and I can therefore easily reboot to bootloader or system. Just cannot get into twrp recovery mode.
Using
Code:
adb reboot bootloader
fastboot boot recovery.img
to boot temporarily into TWRP works like a charm. It's the permanent installation of the image that fails.
The TWRP image I'm using is the unofficial version 3.3 from this URL: https:// unofficialtwrp.com/twrp-3-3-root-moto-g7-play/ (sorry about the spaces in the formatting ... as new user I'm not allowed to insert outside-links)
My phone model is XT1952-1
Any suggestions are appreciated.
Hi guys,
I tried to flash TWRP on my Wiko Lenny 4 earlier.
I used adb and fastboot to flash it, however the touchscreen wouldn't work and I was stuck at the "swipe to allow kernel modifications" screen in TWRP. No problem, I reboot in recovery mode, and switched to fastboot mode.
I found another TWRP image and, after flashing with
-> fastboot flash recovery twrp.img
I typed another command,
- >fastboot boot twrp.img.
Since then I am stuck at the Wiko boot screen, saying:
Orange State
Your device has been unlocked and can't be trusted (initially I unlocked OEM)
Your device will boot in 5 seconds
Whatever combination of power+vol up/down I try to use, it only reboots to this screen.
adb won't reconize any device, as well as fastboot. And both are up-to-date.
Perhaps there exists a recovery image that I can put on my sd card, and hopefully it will automatically boot on the sd card as I don't have any control right now.
If someone has an idea, please tell me.
thanks
[EDIT] Solved
Using this link https://aiomobilestuff.com/how-to-unbrick-wiko-stock-firmware-via-wiko-official-site/
I was able to download Wiko's recovery tool from https://customer-world.wikomobile.com/
After unzipping and starting the software, it automatically installed drivers (I guess, if it does not, mediatek usb wiko drivers can be used instead) and downloaded the software into the phone which works now.
Yesterday i was trying to flash a pixel experience rom on my poco f3 but i was stupid enough to flash it while still in my custom rom. When i tried to flash the pixel recovery it didn't work so i tried doing it again and my phone didn't boot.
It was completely dead , i tried numerous ways but all of them failed .But when i tried holding down both power volume and power button it somehow turned on straight to arrow os. But now when i try booting into recovery mode it straight up boots into the system .I figured that my recovery was messed up so i tried installing twrp through fast boot mode. My phone goes into fastboot mode fine but it doesnot get recognized by my pc .
Get Mi Flash, and install the USB drivers in there.
Then you should be able to do "fastboot boot twrp.img" or the equivalent for OrangeFox.
Make sure to use TWRP or OrangeFox that support Android 12/13 !!!
If you use Windows PowerShell instead of CMD, do "./fastboot boot twrp.img" so basically add "/." before command.
Once in Custom Recovery, install the RamDisk.
Get Full MIUI Recovery ZIP from xiaomifirmwareupdater.com and flash it in Recovery, and then wipe data.
Boot system, then boot back into TWRP/OF and flash your Custom ROM of choice and wipe data afterwards.
Thanks seems like i had some drivers missing i installed twrp and it is working great. Thank you for your time