Related
Hi
I just bought a ZenFone2 yesterday. It's a China/India variant
Code:
[B][U]551ML Z00_ADB[/U][/B]
- (4GB RAM + 16 GB Internal + 1.8Ghz CPU).
Because it's a "grey import" there's no manufacturor's warranty with it (unless I fly to China) - so I'm gonna get to modding this. Now I've been doing it for years with my previous HTC One and Galaxy S3..
However, this Asus Zen seems to be "too commonly named"... the variants, the different versions.. many of them ZE551ML - yet specs different. In fact it took me 5 minutes just to find this one I bought on any website at all (cuz usually the 1.8Ghz version is supposed to carry 2GB RAM)..
Anyway- sorry to drift off topic - I need a quick/easy link to the right files to turn this into a WW version with all 4G channels open hopefully.
It's currently on Android 5.0 and baseband 2.something...
I don't really want to experiment too much because it's my first upgrade in 4 yrs...
So ideally - I'd be asking anyone familiar with this specific variant to point me in the right direction..
Bootloader/Root
FW Upgrade
WWE Variant
Kernel
MM/Noug (I'd go with AICP but ZenUI does offer some cool stuff)
Very familiar with adb commands and stuff - I've been modding apps and kernels for a long time. *Not*Coder* though.
TIA
#
ryankabir said:
Hi
I just bought a ZenFone2 yesterday. It's a China/India variant
Code:
[B][U]551ML Z00_ADB[/U][/B]
- (4GB RAM + 16 GB Internal + 1.8Ghz CPU).
Because it's a "grey import" there's no manufacturor's warranty with it (unless I fly to China) - so I'm gonna get to modding this. Now I've been doing it for years with my previous HTC One and Galaxy S3..
However, this Asus Zen seems to be "too commonly named"... the variants, the different versions.. many of them ZE551ML - yet specs different. In fact it took me 5 minutes just to find this one I bought on any website at all (cuz usually the 1.8Ghz version is supposed to carry 2GB RAM)..
Anyway- sorry to drift off topic - I need a quick/easy link to the right files to turn this into a WW version with all 4G channels open hopefully.
It's currently on Android 5.0 and baseband 2.something...
I don't really want to experiment too much because it's my first upgrade in 4 yrs...
So ideally - I'd be asking anyone familiar with this specific variant to point me in the right direction..
Bootloader/Root
FW Upgrade
WWE Variant
Kernel
MM/Noug (I'd go with AICP but ZenUI does offer some cool stuff)
Very familiar with adb commands and stuff - I've been modding apps and kernels for a long time. *Not*Coder* though.
TIA
#
Click to expand...
Click to collapse
WW version do not opens all Bands of 4G. tell me which particular band you want to use or u need?
sukhwant717 said:
WW version do not opens all Bands of 4G. tell me which particular band you want to use or u need?
Click to expand...
Click to collapse
Okay - But this variant has only one Chinese band. I travel a lot (and live in UK) so I'd need EU + North America + India/Bangladesh -
-- Would be able to answer the rest of my question please? -- (the official asus site has only Lollipop in CN variant SKU, WW has Android M but Japan variant is even newer (Dec 2016) - Shall I grab those or....? I need to fully unlock/crack this open as I will be modding into Nougat soon from Cyano/AiCP
ryankabir said:
Okay - But this variant has only one Chinese band. I travel a lot (and live in UK) so I'd need EU + North America + India/Bangladesh -
-- Would be able to answer the rest of my question please? -- (the official asus site has only Lollipop in CN variant SKU, WW has Android M but Japan variant is even newer (Dec 2016) - Shall I grab those or....? I need to fully unlock/crack this open as I will be modding into Nougat soon from Cyano/AiCP
Click to expand...
Click to collapse
as i mentioned earlier none of the firmware will open all the frequencies.
TW version will open band 1,2,3,4,5,8,9,18,19,28
WW version will use 1,2,3,4,5,7,8,20
US version 1,2,3,4,5,7,8,17,20
CN version 1,20 on FDD and 38,39,40,41 on TDD
and you can choose any of above version of firmware. to change the firmware you must get RAW firmware of your desired version and flash it via Fastboot commands. there are other ways to do so like flashing ifwi and boot files then updating via zip.. but raw is the most safe method. as there are lot of chances you may brick your device..
sukhwant717 said:
as i mentioned earlier none of the firmware will open all the frequencies.
TW version will open band 1,2,3,4,5,8,9,18,19,28
WW version will use 1,2,3,4,5,7,8,20
US version 1,2,3,4,5,7,8,17,20
CN version 1,20 on FDD and 38,39,40,41 on TDD
and you can choose any of above version of firmware. to change the firmware you must get RAW firmware of your desired version and flash it via Fastboot commands. there are other ways to do so like flashing ifwi and boot files then updating via zip.. but raw is the most safe method. as there are lot of chances you may brick your device..
Click to expand...
Click to collapse
Thanks - No info about Europe/EMEA then... What bout Japan? - They have the latest (Dec 2016) FW
ryankabir said:
Thanks - No info about Europe/EMEA then... What bout Japan? - They have the latest (Dec 2016) FW
Click to expand...
Click to collapse
buddy either you are unable to understand or i am not getting it.... being on latest firmware will not change anything in Band configuration. whatever firmware you are on. either it is very first release or the latest one band configuration will be the same. you have choose firmware according to your required Band Config. don't look at latest release. look at your requirement..
sukhwant717 said:
buddy either you are unable to understand or i am not getting it.... being on latest firmware will not change anything in Band configuration. whatever firmware you are on. either it is very first release or the latest one band configuration will be the same. you have choose firmware according to your required Band Config. don't look at latest release. look at your requirement..
Click to expand...
Click to collapse
-Then you did not understand. Please let me repeat it again.
Your msg quote " choose firmware according to your required Band Config. don't look at latest release. look at your requirement. "
My question in my reply " What bout Japan? - They have the latest (Dec 2016) FW "
=
There was no information about the JP SKU FW
- so if I do not know what bands are availabe in THAT FW, then how will I know if it matches requirement?
Choose FW based on Requirement
Don't look at Release FW, look at your requirement. - That's a paradox BUDDY.
Someone has to look at the Released FW (bands + other features) AND then check if it matches their requirement. YES?
Also (separate question)
isn't it possible to merge the various radio_xx.img from different FWs into one CFW so all are open? I've done it previously for HTC One long time ago. I'm wondering if it is different for this device or OS.
ryankabir said:
-Then you did not understand. Please let me repeat it again.
Your msg quote " choose firmware according to your required Band Config. don't look at latest release. look at your requirement. "
My question in my reply " What bout Japan? - They have the latest (Dec 2016) FW "
=
There was no information about the JP SKU FW
- so if I do not know what bands are availabe in THAT FW, then how will I know if it matches requirement?
Choose FW based on Requirement
Don't look at Release FW, look at your requirement. - That's a paradox BUDDY.
Someone has to look at the Released FW (bands + other features) AND then check if it matches their requirement. YES?
Also (separate question)
isn't it possible to merge the various radio_xx.img from different FWs into one CFW so all are open? I've done it previously for HTC One long time ago. I'm wondering if it is different for this device or OS.
Click to expand...
Click to collapse
unfortunately i tried to activate different bands but no success till now.. as per concern with JP firmware.. download it and look for active 4G bands in tlv file..... i don't have JP firmware on my PC. and not willing to download too. data is too costly Buddy. so check it yourself
Solved it, it was easier than other phones actually sys/intel has the right files that need merging from different variants.
ryankabir said:
Solved it, it was easier than other phones actually sys/intel has the right files that need merging from different variants.
Click to expand...
Click to collapse
can you elaborate which additional band you opened on which firmware?
Hi all,
I've managed to do a bad restore with TWRP on my RN5AI (M1803E7SG ) and need a new qcn or a backup of the modem and baseband files. If you have either of these, please share it with me
Thanks
i think it's illegal to change imei here in xda but op was able to fix it.
Hello!
Will you be so kind and tell me, is it possible in that way convert redmi note 5 ai to redmi note 5 global but of course without any illegal activities?
I'm just asking is it possible?!
By illegal activities i mean that i don't wish to change IMEI or anything like that, i would just like to convert phone for chinese market in to phone for global market.
Thank You all and again i'm sorry if i'm offending somebody with this question or ask something stupid.
Afaik if someone share their EFS, and you use it to restore it to your phone; you will copy all the imei information from them. So no one is going to share it with you. You are on your own then. Unless there is a method to edit the IMEI, baseband etc to the same value as written on your box.
You also don't want to use other user IMEI as well, just like other don't want to. If there are 2 devices share the same IMEI, it is possible that they can be banned from the network. Or maybe in a very small possibility of the universe, you will deal with the unknown things. If the other doppleganger device do something bad using their cellphone, you can face the trouble too, as you phone has the same IMEI.
Yes!
I know all this!
Of course!
My intention is that I would like to convert this phone from version which is sold in China (aka AI) to Global version which is sold on EU market! That's it and that's all I would like to achieve!
IMEI change is possible, an I will naturally use original IMEI values from the phone and box.
Anyhow, thank you!
keljian said:
Hi all,
I've managed to do a bad restore with TWRP on my RN5AI (M1803E7SG ) and need a new qcn or a backup of the modem and baseband files. If you have either of these, please share it with me
Thanks
Click to expand...
Click to collapse
I have found "blank" qcm files (without entered IMEI) for restoring!
This is Indonesian MIUI site!
Here is the link for bunch of qcn files!
Use this and save Your self!
Please give is info did you have success!
You can change the IMEI in the qcn file, anyhow this issue has been resolved with the help of another user here. He provided an edited qcn file with my IMEI numbers
keljian said:
You can change the IMEI in the qcn file, anyhow this issue has been resolved with the help of another user here. He provided an edited qcn file with my IMEI numbers
Click to expand...
Click to collapse
That's a true life saver!!! At my previous phone, when we screw up the IMEI, we are on our own. Editing the IMEI only give temporary effect, will be resetted every factory reset. This should give a permanent value.
Do you edit the bluetooth address and wifi mac address as well? Or those address are intact? (0C:98:38:xx:xx:xx something?)
Thanks for trying. IMEI editing topic is a very rare case, and I usually also don't want to deal with (can cause problem later). Should bookmark this in case someday some other users need this.
Jehonan said:
Yes!
I know all this!
Of course!
My intention is that I would like to convert this phone from version which is sold in China (aka AI) to Global version which is sold on EU market! That's it and that's all I would like to achieve!
IMEI change is possible, an I will naturally use original IMEI values from the phone and box.
Anyhow, thank you!
Click to expand...
Click to collapse
Both china (AI version) and global has the same hardware. Only India version has different camera setup. All three version can flash the same Global Stable (latest is MIUI 9.5.17.0). I have seen so many buy china/global version and has migrated from one to another without problem. China ROM difference is it doesn't have playstore installed, while Global has it. So to migrate to Global version, simply flash global ROM MIUI 9.5.17.0, no IMEI changes needed. Just remember not to flash the latest MIUI 10 (8.7.9/10), as it has anti rollback protection. As usual, YMMV, DWYOR.
Desmanto said:
That's a true life saver!!! At my previous phone, when we screw up the IMEI, we are on our own. Editing the IMEI only give temporary effect, will be resetted every factory reset. This should give a permanent value.
Do you edit the bluetooth address and wifi mac address as well? Or those address are intact? (0C:98:38:xx:xx:xx something?)
Thanks for trying. IMEI editing topic is a very rare case, and I usually also don't want to deal with (can cause problem later). Should bookmark this in case someday some other users need this.
Both china (AI version) and global has the same hardware. Only India version has different camera setup. All three version can flash the same Global Stable (latest is MIUI 9.5.17.0). I have seen so many buy china/global version and has migrated from one to another without problem. China ROM difference is it doesn't have playstore installed, while Global has it. So to migrate to Global version, simply flash global ROM MIUI 9.5.17.0, no IMEI changes needed. Just remember not to flash the latest MIUI 10 (8.7.9/10), as it has anti rollback protection. As usual, YMMV, DWYOR.
Click to expand...
Click to collapse
First, let mi thank you for your time, effort and explanations!
Second, here I will go from the end and say that I already know big deal of this you have said to me and that my only reason to do this "operation" of transferring Chinese to Global version is possibility of bootloader lock. As I understand, if one unlock bootloader, like me, to be able to install Global version of ROM, then you stay without lock possibility, and with this without Google Play Store certification.
If I'm wrong here, please tell!
I myself also, don't have time and wish to go in this avanture!
And yes, I don't want to deal with rooting to be able to achieve certification! I wish stock ROM, without anny third party stuff!
Thank you!!!
Jehonan said:
First, let mi thank you for your time, effort and explanations!
Second, here I will go from the end and say that I already know big deal of this you have said to me and that my only reason to do this "operation" of transferring Chinese to Global version is possibility of bootloader lock. As I understand, if one unlock bootloader, like me, to be able to install Global version of ROM, then you stay without lock possibility, and with this without Google Play Store certification.
If I'm wrong here, please tell!
I myself also, don't have time and wish to go in this avanture!
And yes, I don't want to deal with rooting to be able to achieve certification! I wish stock ROM, without anny third party stuff!
Thank you!!!
Click to expand...
Click to collapse
If what you want to achieve is the device certification, than I don't know exactly the detail. I bought the official version from my country, which is the same as global version, certified. UBL + TWRP + Magisk, still certified (magisk has patched it for me). But some China version (dubbed as RN5 AI), don't have playstore from the beginning. So most likely the phone is uncertified if you choose to use the stock ROM from China. (I don't know the exact detail, let me confirm with other user, takes some time). No other way then, modification is a must. Should flash Global Version, and probably need to TWRP and Magisk to get the certification.
Desmanto said:
If what you want to achieve is the device certification, than I don't know exactly the detail. I bought the official version from my country, which is the same as global version, certified. UBL + TWRP + Magisk, still certified (magisk has patched it for me). But some China version (dubbed as RN5 AI), don't have playstore from the beginning. So most likely the phone is uncertified if you choose to use the stock ROM from China. (I don't know the exact detail, let me confirm with other user, takes some time). No other way then, modification is a must. Should flash Global Version, and probably need to TWRP and Magisk to get the certification.
Click to expand...
Click to collapse
Yeah, seems to me that exactly this is the case i have!
I have bought two phones, one for me and one for my wife, they are both Xiaomi Redmi Note 5 AI and this is China version of the phone, without Google Play Store!
Only difference between them is that my phone is 6/64 Gb and my wife phone is 4/64 Gb!
My phone is Model Number is MEE7S and Global version should be M1803E7SG!
According to hardware list, they are the same, difference is "only" in QCN file and /EFS, /Modem!
I have successfully unlocked bootloader on both phones and i have successfully install on both phones this last Global MIUI verion 9.5.17, without any issue what so ever!
Only, Play Store is Uncertified and when i have tried to again lock bootloader and the install this same global ROM, off course, this is not allowed and to be possible to achieve this, phone must report himself as phone for "Global" market, namely EU.
So, if You can help, please help! :crying:
Again, thank You in advance on everything!
Jehonan said:
Yeah, seems to me that exactly this is the case i have!
I have bought two phones, one for me and one for my wife, they are both Xiaomi Redmi Note 5 AI and this is China version of the phone, without Google Play Store!
Only difference between them is that my phone is 6/64 Gb and my wife phone is 4/64 Gb!
My phone is Model Number is MEE7S and Global version should be M1803E7SG!
According to hardware list, they are the same, difference is "only" in QCN file and /EFS, /Modem!
I have successfully unlocked bootloader on both phones and i have successfully install on both phones this last Global MIUI verion 9.5.17, without any issue what so ever!
Only, Play Store is Uncertified and when i have tried to again lock bootloader and the install this same global ROM, off course, this is not allowed and to be possible to achieve this, phone must report himself as phone for "Global" market, namely EU.
So, if You can help, please help! :crying:
Again, thank You in advance on everything!
Click to expand...
Click to collapse
OK.
Follow this guide:
https://www.xda-developers.com/xiaomi-eu-releases-unofficial-miui-10-for-xiaomi-devices/
keljian said:
OK.
Follow this guide:
https://www.xda-developers.com/xiaomi-eu-releases-unofficial-miui-10-for-xiaomi-devices/
Click to expand...
Click to collapse
Thank You, but this dosen't solve anything.
This is not intention or direction in which i would like to go (custom ROM).
Few years earlier maybe, but now, i have give up from all of this "games". "Give" me stock ROM and some way to remove bloatware and that's all i need. I don't have ether time or interest for this (life, wife, kids, nature....)
Big help will be "just" a few informations .
1. Is it enough "just" qcn file from M1803E7SG with changed IMEI values from my phone, so that my phone MEE7S would be recognized as M1803E7SG?
2. Is RAM value in ROM universal or it must be exactly specified? I have a phone with 6 Gb RAM and 64 Gb of storage.
3. Must one change /EFS and /Modem partitions accordingly with qcn file (if i'm not mistaken, these partition will be reflashed with new ROM flashing isn't it)?
Thank You all in advance if You can help me with some useful advice!
Jehonan said:
Big help will be "just" a few informations .
1. Is it enough "just" qcn file from M1803E7SG with changed IMEI values from my phone, so that my phone MEE7S would be recognized as M1803E7SG?
2. Is RAM value in ROM universal or it must be exactly specified? I have a phone with 6 Gb RAM and 64 Gb of storage.
3. Must one change /EFS and /Modem partitions accordingly with qcn file (if i'm not mistaken, these partition will be reflashed with new ROM flashing isn't it)?
Thank You all in advance if You can help me with some useful advice!
Click to expand...
Click to collapse
1. I can't answer that. I know that the M1803E7SG differs from the MEI7S in terms of QCN file, and therefore probably hardware - if you flash a MEI7S QCN on a M1803E7SG, the cell modem won't connect. I would like to try to see if the M1803E7SH qcn can be flashed to the M1803ESG to enable band 28, but I don't know anyone with the H version.
2. Universal - the OS picks up the ram in the kernel.
3. The EFS/Modem folders are overwritten with the QCN file - they are not affected by rom flashing, but can be modifed/written to by TWRP.
Re the .eu version of the rom, it's effectively a universal rom without as much bloatware. It is based on the xiaomi sources and would give you exactly what you're asking for. If you want a stock rom, then this is the closest. If you want to remove the bloatware yourself and use a stock rom, that's fine also. Do what works for you.
keljian said:
1. I can't answer that. I know that the M1803E7SG differs from the MEI7S in terms of QCN file, and therefore probably hardware - if you flash a MEI7S QCN on a M1803E7SG, the cell modem won't connect. I would like to try to see if the M1803E7SH qcn can be flashed to the M1803ESG to enable band 28, but I don't know anyone with the H version.
2. Universal - the OS picks up the ram in the kernel.
3. The EFS/Modem folders are overwritten with the QCN file - they are not affected by rom flashing, but can be modifed/written to by TWRP.
Re the .eu version of the rom, it's effectively a universal rom without as much bloatware. It is based on the xiaomi sources and would give you exactly what you're asking for. If you want a stock rom, then this is the closest. If you want to remove the bloatware yourself and use a stock rom, that's fine also. Do what works for you.
Click to expand...
Click to collapse
Huh!
Here is obviously some type of miscommunication!
My phone Model Number is MEE7S!
I would like to "convert" him to Model Number M1803E7SG which is counterpart of the same phone, "just" Global version!
These are hardware identical phones except enabled bands!!!
And yes, Thank You so much for this information about RAM values, this is excellent!
Also, thank You on such a quick reply i really appreciate this!!! :highfive:
Jehonan said:
Huh!
Here is obviously some type of miscommunication!
My phone Model Number is MEE7S!
I would like to "convert" him to Model Number M1803E7SG which is counterpart of the same phone, "just" Global version!
These are hardware identical phones except enabled bands!!!
And yes, Thank You so much for this information about RAM values, this is excellent!
Also, thank You on such a quick reply i really appreciate this!!! :highfive:
Click to expand...
Click to collapse
You're welcome.
As for the conversion, they are not necessarily the same hardware, the Chinese version MEE7s has fewer bands. Be careful.
keljian said:
You're welcome.
As for the conversion, they are not necessarily the same hardware, the Chinese version MEE7s has fewer bands. Be careful.
Click to expand...
Click to collapse
Of course, i'll be careful, thank you on caring.
Yes, i think that this is main difference between these two phones.
All other is exactly the same, same cameras, same sensors, same display, everything is the same!
And yes, as i have understand, there is no 6 Gb RAM device for global market, only Chinese!
Again, thank You on kind words and understanding, these days it's hard to meet somebody who is not immediately "on the edge" and who is ready to talk and elaborate not to judge!
Thank You!
Jehonan said:
Yeah, seems to me that exactly this is the case i have!
I have bought two phones, one for me and one for my wife, they are both Xiaomi Redmi Note 5 AI and this is China version of the phone, without Google Play Store!
Only difference between them is that my phone is 6/64 Gb and my wife phone is 4/64 Gb!
My phone is Model Number is MEE7S and Global version should be M1803E7SG!
According to hardware list, they are the same, difference is "only" in QCN file and /EFS, /Modem!
I have successfully unlocked bootloader on both phones and i have successfully install on both phones this last Global MIUI verion 9.5.17, without any issue what so ever!
Only, Play Store is Uncertified and when i have tried to again lock bootloader and the install this same global ROM, off course, this is not allowed and to be possible to achieve this, phone must report himself as phone for "Global" market, namely EU.
So, if You can help, please help! :crying:
Again, thank You in advance on everything!
Click to expand...
Click to collapse
You have actually got the answer you need. But just to report back from the small survey I have made in the other forum. 5 of the users who bought the China version, all got uncertified. But one user change to AEX and use some ro.build.fingerprint from the Global version, got the certified status (and cts profile true). The other have flash to 9.5.17.0, rooted using magisk, playstore still uncertified, but magisk show cts profile true, basic integrity true. Don't know why still uncertified, maybe the playstore cache the status from before the patch by magisk. So to achieve the certified, no other way without modification. Editing build.prop, or using magisk module is a must.
Desmanto said:
You have actually got the answer you need. But just to report back from the small survey I have made in the other forum. 5 of the users who bought the China version, all got uncertified. But one user change to AEX and use some ro.build.fingerprint from the Global version, got the certified status (and cts profile true). The other have flash to 9.5.17.0, rooted using magisk, playstore still uncertified, but magisk show cts profile true, basic integrity true. Don't know why still uncertified, maybe the playstore cache the status from before the patch by magisk. So to achieve the certified, no other way without modification. Editing build.prop, or using magisk module is a must.
Click to expand...
Click to collapse
I'm sincerely amazed how much good people still exists!
I really appreciate your effort and spent time!
Thank You!
Now, there is definitely some strange issues here.
I think that maybe solution is to edit qcn file and make this phone Global version. Then, bootloader can be locked and Global ROM can be installed. As i understand, later google policy is that bootloader must be locked and in that way Store will be certified, i hope.
Now, as i understand, this can be done in two ways. One will be to make qcn backup from phone and then edit this backup so that phone model number could be changed, and then this qcn backup, with all other values intact, flash back to phone. Other is to find from someone qcn backup, who has this Global phone, and then in this backup change IMEI and all oher values to correspond all values from my phone.
Now, what's you opinion about all of this?
And again, thank You!!!
I was the one who sent OP with the global qcn file with his/her original imei's. QCN means QUALCOMM CALIBRATION NETWORK file. It only contains your imei and the signal bands your phone should connect to. There is no way you can change model number on the qcn file alone. Sometimes flashing different qcn from a different device will make the phone's baseband unknown.
I think the model number for xiaomi is embedded on the motherboard.
Hi, want to buy one Mi Max 3 to use in usa tmobile !
Can somebody confirm there its a 100% true international version of the phone that has a original Xiaomi international firmware that dont have connectivity problem with bad modem.?? And that gonna receive ota updates and updating it wont brick the device ??
I'm asking because its so confusing that some people say there its not true global version (only chinese with shop rom, and fake global sticker in box)
I only want to buy if works out of the box without problem !
Dont want to have to mess with a brand new phone to try to make it work !
Please let me know, thank you
agel1 said:
Hi, want to buy one Mi Max 3 to use in usa tmobile !
Can somebody confirm there its a 100% true international version of the phone that has a original Xiaomi international firmware that dont have connectivity problem with bad modem.?? And that gonna receive ota updates and updating it wont brick the device ??
I'm asking because its so confusing that some people say there its not true global version (only chinese with shop rom, and fake global sticker in box)
I only want to buy if works out of the box without problem !
Dont want to have to mess with a brand new phone to try to make it work !
Please let me know, thank you
Click to expand...
Click to collapse
This can only apply to people who purchased the global version that has V9.6.7.0.OEDMIFD installed, as we know that 9.6.6.0 is broken
@nijel8 has received an official global Mi Max 3 (9.6.6.0 OEDMIFD) with working modem from this ebay seller:
https://www.ebay.com/itm/2023983206...il&pgrp=main:email&e=op&mchn=em&s=ci&mail=sys
panospc said:
@nijel8 has received an official global Mi Max 3 (9.6.6.0 OEDMIFD) with working modem from this ebay seller:
https://www.ebay.com/itm/2023983206...il&pgrp=main:email&e=op&mchn=em&s=ci&mail=sys
Click to expand...
Click to collapse
there isnt any working modem on 9.6.6.0.OEDMIFD
I tried the default modem, 9.6.12.0 (china modem), 8.8.30, 8.9.6, 8.9.13, 9.6.6.0 (china modem)
I tried changing the vendor partition which broke even more stuff.
Maybe @nijel8 havent checked under ground (parking lots), in door buildings, and more which make the signal so weak.
also there is no LTE/LTE+ on the 9.6.6.0.OEDMIFD
We need someone with the un-released 9.6.7.0.OEDMIFD to confirm this
omer919 said:
This can only apply to people who purchased the global version that has V9.6.7.0.OEDMIFD installed, as we know that 9.6.6.0 is broken
Click to expand...
Click to collapse
omer919 said:
there isnt any working modem on 9.6.6.0.OEDMIFD
I tried the default modem, 9.6.12.0 (china modem), 8.8.30, 8.9.6, 8.9.13, 9.6.6.0 (china modem)
I tried changing the vendor partition which broke even more stuff.
Maybe @nijel8 havent checked under ground (parking lots), in door buildings, and more which make the signal so weak.
also there is no LTE/LTE+ on the 9.6.6.0.OEDMIFD
We need someone with the un-released 9.6.7.0.OEDMIFD to confirm this
Click to expand...
Click to collapse
Don't be so sure as we don't know 9.6.6.0 is broken. You've already said 9.6.4.0 is fake and that wasn't true.
You installation of 9.6.6.0 doesn't proof anything.
We know for sure many times problems are fixed by fastboot rom nad we don't have global fastboot rom released yet to test.
Yes, I haven't tested mine enough to know for sure it runs fine under different conditions so I will not say it has no problems, we've had enough rumors spread around... So let's just leave it to people who have more to say...
I'm on 9.6.6.0 for a week now as a daily driver, no problem at all. So, afaik, 9.6.6.0 is not broken.
pecarosh said:
I'm on 9.6.6.0 for a week now as a daily driver, no problem at all. So, afaik, 9.6.6.0 is not broken.
Click to expand...
Click to collapse
This doesnt confirm anything.
I used 9.6.6.0 for a week and I had a lot of signal issues, nav keys failed a lot
I am looking forward to 9.6.7.0 but especially to 9.6.8.0 which has anti rollback so we will be able to fastboot flash it on ARB devices
Global SKU of the phone is not available yet.
I'd suggest waiting if you want modems to work properly - possibly also extra bands and NFC.
Can a phone with a metal back do NFC? Just asking...
mudnightoil said:
I'd suggest waiting if you want modems to work properly - possibly also extra bands and NFC.
Click to expand...
Click to collapse
mudnightoil said:
Global SKU of the phone is not available yet.
I'd suggest waiting if you want modems to work properly - possibly also extra bands and NFC.
Click to expand...
Click to collapse
I'm not sure if you are aware what are you actually using. The phone does not have NFC. https://www.gsmarena.com/xiaomi_mi_max_3-8963.php That is one of its weak point.
You cannot enable something by software if the hardware is missing.
McNoob said:
Can a phone with a metal back do NFC? Just asking...
Click to expand...
Click to collapse
Yes.
shadow78 said:
I'm not sure if you are aware what are you actually using. The phone does not have NFC. https://www.gsmarena.com/xiaomi_mi_max_3-8963.php That is one of its weak point.
You cannot enable something by software if the hardware is missing.
Click to expand...
Click to collapse
I'm aware the version currently doesn't, and of course it can't be enabled without the hardware.
However, I was told by a retailer (who are selling 'global' units) that the true global version was not available yet, would be a distinct hardware version, and that it may carry both extra bands and NFC.
"I'm not sure if you aware" that other global versions of Chinese phones have added both an NFC reader and additional bands? It is not unlikely in this case.
I had asked them about the likelihood of a Max 3 Pro coming soon (and with NFC) as Malyasian / Indian e-tailers had re-added pre-orders for the Pro, with October expected date. They said they didn't know, but gave the above information about the global Max 3.
mudnightoil said:
Yes.
I'm aware the version currently doesn't, and of course it can't be enabled without the hardware.
However, I was told by a retailer (who are selling 'global' units) that the true global version was not available yet, would be a distinct hardware version, and that it may carry both extra bands and NFC.
"I'm not sure if you aware" that other global versions of Chinese phones have added both an NFC reader and additional bands? It is not unlikely in this case.
I had asked them about the likelihood of a Max 3 Pro coming soon (and with NFC) as Malyasian / Indian e-tailers had re-added pre-orders for the Pro, with October expected date. They said they didn't know, but gave the above information about the global Max 3.
Click to expand...
Click to collapse
Well I did read about the device quite a bit but I haven't seen anywhere the global version would have NFC. I doubt Xiaomi would change the hardware in the global version. M3Pro on the other hand as you say may come with that but its up in the air yet...
It's rare that Chinese brands release any information ahead of availability of global SKUs, even if the hardware differs (which it not infrequently does).
We'll see.
The Max 3 is apparently among those devices that'll be officially available in European markets .. that makes it a lot more likely that bands and NFC will be added, as there have been in other phones.
I didn't think that there was any difference between the original Chinese variant and the International/Global variant which they began selling in Hong Kong, Singapore and the Philippines last week, but I was wrong. My Chinese Mi Max 3 arrived from tradingshenzhen with an unlocked bootloader and xiaomi.eu flashed as I had requested, and with xiaomi.eu 8.8.9 it works great. But a friend recently came home with a Max 3 purchased in the Philippines which is running v9.6.7.0.OEDMIFD (Global). When he goes to the Mi verification web site and enters his IMEI it says "you have a valid International Version". When I go to the site and enter my IMEI it says "you do not have a valid International Version and may encounter difficulties - please purchase from official distribution channels in the future".
panospc said:
@nijel8 has received an official global Mi Max 3 (9.6.6.0 OEDMIFD) with working modem from this ebay seller:
https://www.ebay.com/itm/2023983206...il&pgrp=main:email&e=op&mchn=em&s=ci&mail=sys
Click to expand...
Click to collapse
thanks for the reply, so it comes down to luck, hit or miss with 9.6.6.0 and i'm better off waiting for xiaomi to put a fixed version in the official rom website ? (As of now no official firmware to download there for this device !)
omer919 said:
This doesnt confirm anything.
I used 9.6.6.0 for a week and I had a lot of signal issues, nav keys failed a lot
I am looking forward to 9.6.7.0 but especially to 9.6.8.0 which has anti rollback so we will be able to fastboot flash it on ARB devices
Click to expand...
Click to collapse
Ok, I am getting irritated by you already...
Don't give your opinion on something you don't completely understand. As I said your installation procedure is so lame I don't even know how to say it without offending you. Believe me that is not my intention...
First you don't have global version and the OP question is specifically for that one.
Second you don't have fastboot global rom to begin with. There are so much more to the rom than what is it in the recovery zip. Otherwise Xiaomi won't be releasing both.
Third how do you know if Xiaomi didn't place some restrictions preventing Chinese devices running Global rom properly hence your problems...
So until you flash fastboot Global rom or better yet for this OP get global version try to not spread false information.
Peace...
No official yet?
agel1 said:
thanks for the reply, so it comes down to luck, hit or miss with 9.6.6.0 and i'm better off waiting for xiaomi to put a fixed version in the official rom website ? (As of now no official firmware to download there for this device !)
Click to expand...
Click to collapse
I have this and this has no problem with calls and data. Is this not official?
Can't get more official than this...
LTE? In what part of the world?
nijel8 said:
Can't get more official than this...
LTE? In what part of the world?
Click to expand...
Click to collapse
Manila, Philippines
Although it displays as 4g+ instead of LTE.
Do most people here also want to use it with t mobile? I'm in the same situation as OP. Curious about this on att and t mobile and don't want to mess with it much right out of the box
Hey guys
I bought a g7 play xt1952-1 phone from tecobuy (it all came packaged like a brand new phone)
The firmware is showing version ppy29. 105-57
The software channel is showing reteu, hardware version pvbt (is that hardware version correct?)
When I run software update check it shows its up to date with march update..however when I check some of the firmware sites they list newer firmware.
Can anyone confirm what the latest firmware is?or how do I check which reteu region is my firmware ? (like which reteu country)
Or can I download the other reteu firmware and flash it without unlocking the boot loader??
ive discovered my cid when running the fastboot command is cid 32
all the other firmware available...is usually cid50..
anyone know what region cid32 is supposed to be? this phone is supposed to be international/eu?
also when i ran the lenovo recovery software (lenovo smart assist)for the phone...it downloaded the CID50 firmware and i tried or did install that one..however when i still check using fastboot it still showing cid32..
and whats the difference between cid32 and cid50?
could cid32 be the demo display model?
redavenger said:
also when i ran the lenovo recovery software (lenovo smart assist)for the phone...it downloaded the CID50 firmware and i tried or did install that one..however when i still check using fastboot it still showing cid32..
and whats the difference between cid32 and cid50?
could cid32 be the demo display model?
Click to expand...
Click to collapse
It appears that the latest firmware build for your variant of the xt1952-1, RETEU, is PPY29.105-134 (cid50) which would have a security patch level of June 1st. You can download the latest firmware build from this repo of official stock moto firmwares.
https://mirrors.lolinet.com/firmware/moto/channel/official/RETEU/
Don't give a lot of thought to the cid nomenclature. If your device is the RETEU xt1952-1, the link above will definitely provide you with the latest, correct build for your device. Of course, you may install this firmware with a locked or unlocked bootloader. If your bootloader is unlocked, installing the latest firmware via fastboot will not relock it.
The best I can recall, cid32 indicates a factory installed, initial "out-of-the-box" build. But again, do not give much thought to this. Regardless of your exact geographical location, the latest build of PPY29.105-134_cid50 for the RETEU xt1952-1 is the correct build for your phone.
yeah the phone did get flashed with the cid50 rom..with a locked bootloader...its all working correctly.
only thing i can put the cid32 version down to is that it could be a south eastern european version...as the instructions in the box are for romania/slovakia/hungary/bulgaria
so could cid32...be referring to the retail eu version for that region?
also it would be good if i can get my hands on the cid32 firmware version.
redavenger said:
yeah the phone did get flashed with the cid50 rom..with a locked bootloader...its all working correctly.
only thing i can put the cid32 version down to is that it could be a south eastern european version...as the instructions in the box are for romania/slovakia/hungary/bulgaria
so could cid32...be referring to the retail eu version for that region?
also it would be good if i can get my hands on the cid32 firmware version.
Click to expand...
Click to collapse
I agree that it's possible, but not a practice traditionally implemented by Motorola in the past. Anyway glad everything worked out for you mate. I'll dig a little further into the cid32 just out of curiosity and see what I can find on my end.
yeah if you could find out what the cid32 means that would be great...and if you could get your hands on the cid32 firmware too?
redavenger said:
yeah if you could find out what the cid32 means that would be great...and if you could get your hands on the cid32 firmware too?
Click to expand...
Click to collapse
The cid value is 100% insignificant when it comes to ascertaining the correct build. With Motorola smartphones, the two factors which matter are the model number (almost always beginning with "XT") and the firmware channel (e.g. RETEU, RETAIL, AMZ, SPRINT, etc.). As long as these match your getvar values, then you have the correct build. With the cid nomenclature, a lower number doesn't necessarily indicate an older build. In other words, there are scenarios whereas a cid32 value can be a newer build than a firmware package with a cid50 value. I chatted with Lenovo tech support on this. I hope this info helps.
If you are searching for the newest build for your device with a cid32 value, versus the cid50, it does not appear that such a build exists. Lenovo is not aware of any such build and my search within Motorola firmwares repos didn't turn up anything. All info indicates that you are running the correct build for your device.
yeah its a funny thing though..the phone came with cid32 firmware build...dated for march 2019...so already it was running outdated firmware out of the box..and it didn't pick up any OTA updates either..
when i tried flashing via lenovo smart assist program..it downloaded the current cid50 reteu firmware...the program did try to flash it..and it said it was successful...but it wasn't because it was still running the march 2019 updates...anyway i used fastboot commands to install the firmware..
thats why i am very curious as to why the phone is still set as a cid32? and why didnt it just switch to cid50 when i tried using the lenovo smart assist program.
somebody at lenovo should know what the cid32 means.
redavenger said:
yeah its a funny thing though..the phone came with cid32 firmware build...dated for march 2019...so already it was running outdated firmware out of the box..and it didn't pick up any OTA updates either..
when i tried flashing via lenovo smart assist program..it downloaded the current cid50 reteu firmware...the program did try to flash it..and it said it was successful...but it wasn't because it was still running the march 2019 updates...anyway i used fastboot commands to install the firmware..
thats why i am very curious as to why the phone is still set as a cid32? and why didnt it just switch to cid50 when i tried using the lenovo smart assist program.
somebody at lenovo should know what the cid32 means.
Click to expand...
Click to collapse
I have a Moto E 2015 (2nd Gen) and a Moto G 2013 (1st Gen) which are both untouched and in out-of-the box states. A fastboot getvar command on both returns a cid32 value. I should also mention that both of these devices are US variants (the Moto E is a Sprint variant (Boost Mobile), while the Moto G is a GSM unlocked retail). This would lead me to believe that the cid32 value is indicative of an undistributed, out-of-the-box firmware build that was installed at the factory by the OEM. (Both of these devices use cid50 firmware packages which have been officially released.) I, too, would think that a Lenovo employee would know the meanings of the various cid values. The two I've chatted with -- both from tech support -- either do not know or will not say. (I should note that Lenovo and Motorola Mobility are known for classifying certain firmware information as classified. I ran into a brick wall a couple years back while attempting to get more information on the public release of certain blankflash files used to restore hard bricked Moto devices via EDL (qload) mode. Motorola maintained the position that any blankflash files available to the public had been leaked and not officially or unofficially released. Motorola stated that they do not release blankflash files under any circumstances for security reasons).
I have researched this some more on various Moto device forums here on XDA. It appears that the cid value within firmware package names is indicative of regional differences in the radio firmware files only (with Moto firmware packages, the radio firmware typically encompasses both the NON-HLOS.bin and the fsg.mbn files). In other words, take two firmware packages, one with a cid32 value and the other with cid50, but otherwise everything is the same. From what I've gathered, the only difference between the two packages would be the radio firmware builds.l, Many firmware packages use a "universal" radio firmware build. For example, my two Moto devices that I mentioned previously will run perfectly fine on cid50 firmware, although they shipped with cid32. In your case, it appears that the circumstances are the same. If you are having no signal or data connection issues, then the cid50 package on your device is perhaps a "catch-all" radio firmware type. In any event, so long as you aren't having any type of adverse signal issues or data connectivity problems, the cid50 radio firmware running on your device now is fully compatible and correct in type. But, please keep in mind that I'm going on research and personal experience with Moto brand devices. My theory on the cid value could be completely wrong, so please do not quote me on fact. I hope the info helps some.
interesting viva......it makes the whole cid32 value quite interesting.
my g7 play version with cid32 value is or was a bulgaria/romanian shipped version...so if your phones were us variants with cid32 value then yes it probably doesn't mean a regional area, but like you mentioned possibly some kind of a "undistributed, out-of-the-box firmware build that was installed at the factory"...still it would very interesting to know why some phones come with cid32 and others cid50.
redavenger said:
interesting viva......it makes the whole cid32 value quite interesting.
my g7 play version with cid32 value is or was a bulgaria/romanian shipped version...so if your phones were us variants with cid32 value then yes it probably doesn't mean a regional area, but like you mentioned possibly some kind of a "undistributed, out-of-the-box firmware build that was installed at the factory"...still it would very interesting to know why some phones come with cid32 and others cid50.
Click to expand...
Click to collapse
Yeah, quite perplexing, and a topic of which your original post has made me curious. I am still researching the cid values and will post any info I come across.
out of curiosity the devices you had, were they bought through official channels? or through 3rd party shops...especially the retail phone you bought.
i'm thinking maybe the cid32 value could mean a oem phone which is to be sold to or via 3rd party channels? like a re-seller? for example i got my g7 play via tecobuy, which is one those re-sellers and not a official supplier...so that way motorola doesn't provide a warranty, but it has to go back to the re-seller?
redavenger said:
out of curiosity the devices you had, were they bought through official channels? or through 3rd party shops...especially the retail phone you bought.
i'm thinking maybe the cid32 value could mean a oem phone which is to be sold to or via 3rd party channels? like a re-seller? for example i got my g7 play via tecobuy, which is one those re-sellers and not a official supplier...so that way motorola doesn't provide a warranty, but it has to go back to the re-seller?
Click to expand...
Click to collapse
My Moto G was purchased directly from Motorola, while my Moto E was purchased from Best Buy.
i guess that throws my theory out the window
redavenger said:
i guess that throws my theory out the window
Click to expand...
Click to collapse
Not necessarily. Best Buy is a first tier retailer that receives preferential treatment from most suppliers. Joe's Discount Phones and Vape located in the back of the 24 hour convenience store (or a trailer) is another story.
That said, I agree cid is meaningless from a consumer/modder perspective.
i think i have another theory what the cid32 might mean.
i think it could mean that its not to receive any updates?
for example when i flashed the phone using LMSA...it downloaded the reteu cid50 version....however the phone still shows cid32...anyway forward a month and there is a new software update version 105-134-2, however the phone doesnt pick it up when using the update check on the phone...
however using LMSA..its downloading this newer version.
anyway could this cid32 mean that its a restricted phone which isnt supposed to get OTA updates?
hey , i found this one in a lenovo forum
it seems to be the cid32 & cid50 versions just mean a retail device
https://forums.lenovo.com/t5/MOTOROLA-Android-Developer/Moto-g7-play-firmware-version/td-p/4507434
maybe it helps to answer your question
overdoxx11 said:
hey , i found this one in a lenovo forum
it seems to be the cid32 & cid50 versions just mean a retail device
https://forums.lenovo.com/t5/MOTOROLA-Android-Developer/Moto-g7-play-firmware-version/td-p/4507434
maybe it helps to answer your question
Click to expand...
Click to collapse
Cool. That makes sense. I recently ran across a scenario where a firmware package with a cid32 tag was installed to a Moto G3 which showed cid50 tag via fastboot getvar all. Even after the fastboot installation of the firmware, the cid50 tag showing on the device did not change.
Hi,
Not been around here since the days of the S3.
Anyhow, recently picked up a dual sim LG G7 thinq mostly for use a backup phone.
It's a LM-G710EMW model, of which there seems to be precious little information compared to over versions.
LG Bridge doesn't seem to work in Mac anymore, but when it did it told me there were no updates for my model.
Currently it's stuck on Android 8.0.0. Are there no official updates for this at all?
Software version is listed as V10d-LAO-YT
Hi
you can download firmware here https://lg-firmwares.com/lg-lmg710emw-firmwares/ Which exactly I cant tell because you didnt provide more info from version page (csc maybe imei).
You can flash it via LGUP (im not sure about mac compability) by this guide https://forum.xda-developers.com/t/guide-how-to-flash-stock-firmware-and-re-lock-bootloader.3820888/ (you need to follow first half)
Thanks. Strangley almost everything related to finding out the CSC is for Samsung devices.
Anyhow, looking at the IMEI the 7th and 8th number are 09, which according the only table I could find is India. Sounds about right, but doesn't seem to be any way to confirm it.