Develop Bugs

Review of Seidio ACTIVE w/Multi-Purpose Cover - lots of pics!!!

This is a review of Seidio ACTIVE Case with Multi-Purpose Cover for Nexus 7 - http://www.seidioonline.com/asus-google-nexus-7-active-case-amethyst-p/bd2-csk3asn7-pr.htm
I've been a huge fan of Seidio products, and have tested and reviewed most of their Note 2 cases. Their product always stands apart because of the high quality of material, perfect fitment, piece of mind you get knowing your gadget is protected, and... signature lint magnet of silicone shell So being familiar with their line of phone cases, I was curious how will it carry over to my Nexus 7 tablet. No surprise here - this case is Top Notch and Multi-Purpose Cover takes it to another level!!!
Let's first start with a case itself. This is a signature dual layer ACTIVE design with shock absorbent inner silicone shell and outer skeleton made out of high impact polymer that provides additional corner and side protection. The inner shell by itself has a very nice tight fit with a wrap around reinforced bumper which is surprisingly wide enough and will nicely cover the edges of screen protector (if you have one). It also has rugged side grips that will be exposed even after external skeleton shell is attached. All the port cutouts are precise and aligned perfectly. Power and Volume up/down buttons are covered, easy to press, and have perfect tactile feedback. The fitting of inner and outer shelves is like a glove. Outer shell has a very smooth rubbery finish - a signature Seidio coating. The tablet with a case feels very solid in your hand, great grip and absolutely non-slippery. Also, relatively lightweight.
So, if we are talking about Sedio case, where is the signature magnetic kickstand? This function is brilliantly implemented as part of Multi-Purpose Cover. For anybody considering getting ACTIVE case without it, do yourself a favor and get this cover, its a MUST have!!! First of all it serves as a cover for the top of the case. Very nice tight fitting cover to protect your screen. It latches on securely, thanks to 4 dimples (one on each corner) and 4 bumps (matching on inner corners of the cover) that interconnect together. No need to worry about cover scratching your screen since inner stand part has a felt lining. Once you remove the cover, you can attach it to the back of the case, through the same interconnected dimple/bump - another great idea so you don't loose your cover when its open. And to top it all - the inner part of the cover lifts up to turn into kickstand with 10 adjustable angles. In a kickstand position you can place your tablet in either portrait or landscape - very sturdy and secure. The cover itself on outside has 2 rubbery non-slip pads that will grip to any surface, thus protecting your case/stand from sliding.
Honestly, I can't even think of one negative, except for lint magnet which as I mentioned before became a signature thing with Seidio lol!!! Its a very versatile case which gives your Nexus 7 tablet a great rugged protection for indoors and outdoors. Definitely a must have!!!
Now, here comes the pictures.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Just got mine today and love it so far
Sent from my SGH-T989 using xda premium

Thanks for all the pictures. Nice kitchen too, +1.
Shattered my last N7 so looking for a drop-proof case. This or Otterbox? Iwish Otterbox made their Commuter series for the N7, bec Defender looks like overkill.
The rear of the Poetic Revolution with all it's visible kickstands looks like a cheap plastic picture-frame.
Gumdrop and BobJ, I dunno, don't really like the design of just a big piece of rubber/gel/silicone.
Sent from Winterfell using a Raven

Review of Trident Aegis S4 case with lots of pics!!!

This is a review of Trident Aegis case for S4: http://www.tridentcase.com/shop-pro...i9505/aegis-case-samsung-galaxy-iv-i9505.aspx
Having tested Aegis for N2, I was a little surprised about design change for S4 where instead of a dual injected layer (two layers combined) they went back to 2 separate layers design. After testing this case with my display model of S4, I quickly realized - this is a good change! Let me start first by actually taking a note of the packaging box Aegis came in. I just think it's totally awesome how this company embraced the image of Trident and different mythological creatures for every case in their series, and how it gets reflected even in the packaging cardboard box it comes in. Of course, the display package looks cool too. In addition to the case, Trident also included a screen protector and a pocket catalog with all of their cases with installation instructions for each. Obviously I didn't install the screen protector, but it doesn't feel flimsy like some of those cheap ebay ones. Something that I found very useful, their protective layer which you peel off before installation has a guiding dotted line which makes it very helpful with alignment during the install. I think it's a nice touch to include a bonus free screen protector considering not too many case company do that anymore.
Now to the case itself. It consists of two layers, inner shock-absorbing silicone layer and outer hardened PC plastic shell. Aegis series was always considered for casual use, but this S4 version stepped it up to a very decent rugged use. According to Trident website, this case actually meets Military standards (MIL-STD-810F for vibration and drop), and it sure feels like it. Inner silicone layer has nice textured thicker back padding and also a thicker all around bumper with enhanced corner protection. The screen bumper is raised so there shouldn't be any issues placing the phone down on the screen. It also has attached port covers for micro-usb and headphone ports. I do have to mention because this is silicone material there is some pull around the edges. At the same time, I have not noticed it being lint magnet, and it felt pocket friendly. Outer PC shell wraps around the back with extra top/bottom protection and 4 side grips to keep inner shell from sliding off. Also, it has a dust cover for the speaker. Both shells interconnect with a precision and wrap around S4 to give a solid protection. In addition to covering headphone, micro-usb, and speaker ports, power/volume buttons are covered as well and have a very nice tactile feedback feel. The camera/flash is one common opening, and with border lining of inner silicone layers it makes sure your don't get flash reflection which often a problem on white cases where pictures get overexposed.
Overall its a very impressive case which should be considered for both casual and outdoor use, and will definitely give you a piece of mind if you drop the phone. Not to mention that it also comes in 5 different colors. What makes it totally insane is that on Amazon you can get it now for about $17 shipped, and that includes screen protector!!!
Here are the pictures for your enjoyment:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

+1 - great write up. This is by far my favorite line of cases and it is great on the s4.
Sent from my SGH-M919 using xda app-developers app

Nice review!. I have the Commuter but I'm considering this one because it looks more protective. Thanks

keltsi95 said:
Nice review!. I have the Commuter but I'm considering this one because it looks more protective. Thanks
Click to expand...
Click to collapse
maybe i'm a little paranoid but i'm currently using this case right now with the spigen glas tr slim and it seems like the case could be popped off inadvertantly. it doesn't seem to fit that snug and i can pull back the rubber parts on the right and left easily.
edit 10-13-2013
after a month i think it's a pretty decent case. i had to buy a headphone adapter to get any headphone to fit inside the jack though.

M919
Does this case fit the M919?

Trident Cyclops Case (Similar to Otterbox Defender)

Slim Hard Case with Built-In Screen Protector (comparable to Otterbox Defender Series)
http://www.tridentcase.com/shop-products/motorola-moto-x/cyclops-case-motorola-moto-x.aspx
TL;DR: My case didn't seal properly, but if it did, I would've been quite happy with it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Long Version
I ordered mine off of Amazon (for about $15 less than what Trident sells it for). I was under the impression that my product would be manufactured in the USA, given that Trident makes a big deal about that on their website. It came in Trident-branded retail packaging, but was clearly labeled "Made In China" on the back.
The case is a thin TPU, surrounded by a hardened silicone border (with reinforced corners). The frame for the top is hard plastic (TPU?), and comes with a glued-in plastic screen protector. Once in the case, the phone is exactly the same size as the Galaxy S4, only slightly thicker. The screen is still manageable, and the heft is not too outrageous, considering that it probably offers a decent amount of protection.
Pros
Reinforced corners
Rigid support
Easy to install
Buttons become larger and clickier
Screen protector does not cover the proximity sensor
Microphone and USB port covers
Dust filter for the speaker grill
Physical design is much more attractive and less bulky than what you'd find with an Otterbox case
Cons
So long, Moto Maker design...
The top portion of my case would not seal / seat properly (defective design?)
The silicone (as expected) grips to cloth
You lose the beautiful industrial design of the Moto X in a bulkier case
The port cover flaps are a little annoying to work around (and don't insert securely enough for my preference)
The case is difficult to remove (but much easier to remove than the Otterbox Defender)
Build materials are not as high-end as those found in an Otterbox case
Summary
I contacted Trident, asking if this case has any known manufacturing flaws, in regards to the top portion of the case being off in their measurements. To describe the problem: on the left and right of the headphone jack flap, there are two tabs that are meant to lock into the top portion of the case. Mine do not lock, and there is a large gap between the case and the phone. If you touch the top portion of the case, it makes a displeasing clicking sound. The answer I got back was, "Oh, sorry your case isn't working out. We can RMA it." But then, I don't want to continue sending in the case, only to receive similarly defective units. Basically, I worry that in a hard spill, not having that top portion of the case secured shut, could send your phone flying.
If you could try this case out in a store, and it fits perfectly, I'd say that it's a great case for someone who is worried about a hard drop, but finds the Otterbox Defender to be comically large and ugly. This case is actually surprisingly slim, given the protection it offers. So if it all worked as it should, I would be keeping it. But seeing that the snaps are not only off in measurement - but also - seem like they are structurally inefficient, I'm going to assume that this is simply a design flaw. Perhaps they designed the case without having access to the device?
I might try grabbing a second one. I'm unsure, though. Has anyone else used this case at all?

Photos are corrupted, please try to reupload, I'd like to see the case
Sent from my Moto X using Tapatalk

danny39 said:
Photos are corrupted, please try to reupload, I'd like to see the case
Sent from my Moto X using Tapatalk
Click to expand...
Click to collapse
Google has pics!
Sent from my XT1058 using Tapatalk

I just got the Trident Kraken AMS last night as an early Xmas gift. Ive had very good results with Trident products in the past and this case is solid. On the Kraken the front is the same as Cyclops but its a 3 piece rather than 2 and bulkier. Its not a daily use case though, I have a bike mount system for mountain biking. If you don't mind the extra bulk get the Kraken. My daily case is a TPU.
Sent from my XT1060 using Tapatalk

Review - Otterbox Commuter Series for HTC One

The price of Otterbox brand cases was always a huge turnoff as was the size. I didn't want my slim One having additional bulk---at least any more than was necessary. Enter Commuter series.
The case is comprised if two pieces; soft rubber interior case and hard plastic exterior that protects the back, sides, and the bottom/top of the phone. The inner case has soft plastic nubs that cover both the charging port and headphone jack. IR blaster is exposed as are the bottom Mic, rear Mic and camera. Volume manipulation is easier with this case as the soft plastic raises the button height. Feels decidedly sturdy and premium. Fits well but does take some time to get the outer case to snug up to the inner case. Comes with screen protector though I haven't and will not install it.
In hand the case feels sturdy without the additional bulk associated with Otter Box cases. Grip is much improved over going caseless, and as stated earlier it's much easier to manipulate the volume.
Protection wise it seems to offer what you would think an Otterbox would offer. Corner impacts are absorbed by the soft plastic interior case, and the screen won't touch the surface you lay it on because the screen is recessed a few milimeters due to the case design. It's also nice that both ports have covers installed to keep debris from entering them. Only gripe on that point is one handed operation to plug in the usb cord and headphone jack is tricky but doable.
The good thing about this case aside form the protection is the fairly slim profile and the ease of going in and out of your pocket. Both pieces of the case are hard and slick enough to not snag up going in and out of your jean pockets.
The only real complaint that I have is how hot the phone seems to get during gaming. Though it's a phone issue and admittadly the plastic never feels as hot as the phone felt caseless.
If you are looking for a case that offers great protection while still maintaining a slim profile; this case is ideal. A little pricey, though (35 USD @ Sprint Store)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my HTCONE using Tapatalk

I've had this case since the second week of having my one. I initially had bought the incipio dualpro shine, but it made my signal go in the toilet, even though the package said it wouldn't affect it... Signal issues aside, the commuter is a much better case. The port covers and shape of the IR blaster cutout are the winning features.

5 Stars Case!
I had this case after 3 weeks Using my one..Its been almost 8months now and my One fell down so many times. And still working great..Protection is great and the look is great.I have nothing to complain about this case..

Love the commuter case on any phone that I had it on but when I got my One I thought it made the phone feel a little wider than usual so I ended up going with another case but my fiance got it cause she has the case of the drops and it has taken a beating and keeps on ticking.
Sent from my HTC6500LVW using Tapatalk

Review of UAG Folio Case for S6 w/lots of pics!!!

This is a Review of UAG Folio case for Galaxy S6. http://www.urbanarmorgear.com/products/galaxy-s6-folio-black, available on amazon: http://www.amazon.com/URBAN-ARMOR-GEAR-Samsung-Galaxy/dp/B00SXFEAB4/
I have reviewed a number of different "folio" cases in the past for various phones, but I never end up using one. The problem is that most of these cases are either too slim with hardly any drop protection in favor of scratch protection, or they have annoying flapping cover that doesn't stay latched, or have front cover storage that bulks up the case and puts a pressure on the screen. Either way, it wasn't my cup of tea though I know a lot of people do prefer these. Furthermore, while being a fan of UAG cases I know they like to play it safe with their signature fused double layer open face design. So you can imagine my surprise when they introduced and I got a chance to test their S5 Folio case last year. Now, on their 2nd gen, they re-introduced Folio case for S6 model with an updated design. Here is what I found.
The first thing you notice out of the box is a soft textured feel of this case. Referred to as "frogskin technology" grip, they use a proprietary rubberized material with a non-slip grip where according to UAG it maintains grip even in wet and slippery conditions. Once you flip the cover open, unlike S5 Folio case, you are no longer presented with a pocket under the cover. The inside has a padded cover with suede finish that won't scratch or put a pressure on the screen. The front cover has a very narrow tab with a magnetic latch on the side to keep it closed. I do have to mention that once magnetically “latched”, the cover is securely closed but I had to align it with a magnet every time I closed it. That narrow tab is “too narrow” to close with a casual flip, so it requires just a little bit of effort to make sure it’s aligned.
So where did a pocket for credit cards disappeared? Like a magician case with a secret trap door, there is a velcro strip to flip the cover flap and to reveal a secret pocket in the back where you can place up to 3 credit cards. At first I was on a fence if I like this solution or not. It is very original, and it keeps the case slim (relatively speaking) without bulging cover where you usually store your cards/money. Here, you won’t be able to put money bills, but 3 credit cards (or combination with a driver license) fit perfectly and easy to slide out. I think it’s a really cool idea!
As I mentioned above, one of the big problems with a folio cases is not enough security to hold the phone and lack of general protection if you drop it. Some cases barely even hold your phone at the corners while others glue a cheap tpu or plastic case to the back cover. Here you have a fully functional high quality case with a folio cover on top of it. This portion of the case resembles a regular UAG case with a similar fused dual layer design and inner honeycomb impact resistant layer, but instead of a hard shell it uses soft rubberized "frogskin" finish. You still get a great level of protection while holding it securely inside and an easy way to take the phone out when need it. You even get a secret hidden pocket for a spare SIM card storage. Also, just like with a regular UAG case, you get power and volume up/down buttons covered and a great tactile response when pressed. All the ports are generously open at the top and the bottom of the phone, and you get a precise camera/flash/sensor cutout on the back. The front cover has a cutout around front speaker area at the top so you can carry on a phone conversation with a cover closed.
Overall, I think this is among few folio cases that I find to be all in one stylish, practical, and not too bulky whenever someone decides to keep their wallet at home and just take the phone and keys along with a case. It offers hidden storage functionality, high quality exterior finish, access to all the ports and buttons, and the same high level of protection I have come to expect from their regular cases. After all, it is still tested to meet military drop-test standard (MIL STD 810G 516). Also, the case is available in Black or Red exterior color.
Here are the pictures.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}