Related
// Disclaimer
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
// Info
It's unnoficial LineageOS14.1 for Galaxy S4 Jfltexx (GT-I9505).
// Info
I strongly recommend to perform a backup of your current rom before installation.
Regarding going from unofficial builds to official - or official to unofficial builds that can be done by as described here:
https://wiki.lineageos.org/signing_b...-or-vice-versa
To migrate from unofficial build to official or official to unofficial:
1. download this script
2. ensure that file has LF (UNIX-style) line endings
3. put it on your phone
4. reboot into recovery
5. make a full backup!
6. go to the folder where script is located
7. run: ./migrate.sh official
8. WARNING! rebooting phone now would end in data corruption!
9. flash the official build now (after flashing official build it is safe to reboot)
10. flash Gapps (and any addons)
11. reboot
Installation Procedure : coming from stock rom
TWRP - Odin flashable (I use Odin 3.12)
Build from xx.xx and Gapps + Magisk Root to external SD
01. I take the battery out now, then battery in again and off into the download mode.
02. flash TWRP with Odin (comes in AP). The hooks at Auto Reboot and F. Reset Time out.
03. disconnect USB cable after flash, battery out and in again.
04. boot into recovery -> Allow Modifications
05 Advanced Wipe: Dalvik/ART Cache, System, Data, Internal Storage, Cache (lasts a while)
06. install -> select lineage image, then add more zips and gapps, Magisk then flash
07. patching system image unconditionally runs through with progress bar
08 Open Gapps are flashed, progress bar runs through
09. when done, tap reboot system, Swipe to install TWRP app (or not, if you don't need it)
10. reboot
11. los 14.1/boots. (quite a while ^^)
12. type through the facility
13. read
// Install
Recommend: Rooted device with custom recovery like (TWRP 3.X.X)
// Info Installation Instruction 14.1
rom+ gapps pico or nano ARM + magisk zip on the sd cards
Installation (Clean Install):
Remove device lock (pattern/PIN/...)
Create Nandroid Backup
Fullwipe in recovery (wipe system, data, cache and dalvik)
Flash ROM
Flash Gapps flash (Android 7.1 and ARM)
Flash Magisk or SuperSU
restart
manual Update:
Create Nandroid Backup
Cache and Dalvik in recovery wipen
Flash ROM
restart
// OTA
https://www.los-legacy.de/jfltexx
14.1 update interval monthly
Download: Open Gapps 7.1
(ARM Pico or Nano)
Download: Magisk for Root
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Downloads: TWRP/Baseband/Bootloader
https://www.androidfilehost.com/?w=files&flid=143393
// Thanks / Credits
Code:
* CM team, Omni team
* XDA developers
* Everyone who has contributed to CM on S4
* syphyr and NucWin for their previous work
* Many thanks to invisiblek
// Info Mitsch79 is currently taking over Benlue work
Code:
[B][U]since some users have already asked me about new features[/U][/B]
Since it is a pure lineageos version
and not as optimized as for example from side.
All I do is to get your mobile phone Up-To-Date
and The errors that I do is release themselves or after every update
[B][U]I hope you understand that I don't make any changes to the version[/U][/B]
// for German
[ROM][LINEAGEOS][CM14.1 UNOFFICIAL][7.1.2][I9505] BY MITSCH79
XDA:DevDB Information
[ROM][UNOFFICIAL] LineageOS 14.1 for Galaxy S4 (GT-I9505)los-legacy, ROM for the Samsung Galaxy S4
Contributors
BenLue, Exodusnick, Mitsch79
Source Code: https://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: LineageOS
Version Information
Status: Nightly
Created 2016-12-16
Last Updated 2020-04-16
<3 <3 <3
thnx to your rom
are there any bugs? does it work camcorder ?
cmert said:
are there any bugs? does it work camcorder ?
Click to expand...
Click to collapse
Jup,
OTA isnt working
Sometimes CAM is crashing (Cant connect to device) After reboot, its working fine
Looking forward to flashing
Thanks for the new build. One thing i like already is the file size. Nice and small. I like to run lean as possible. I will test it out and see how it rolls.:good:
I'm having trouble accessing the download site, and the link to Mega is invalid.
gugugrp said:
I'm having trouble accessing the download site, and the link to Mega is invalid.
Click to expand...
Click to collapse
Sorry, sync fail :/ Download Links are updated.
Greetings
Can I pm you?
deleted
Thanks - works like a charm
[email protected]
Thank you for the rom is very stable have hitherto no bugs can recognize
Hi I noticed that when I take a screenshot andò I try to open it through the statusbar. The Gallery app gets freeze. Am I the only one that gas this bug?. Thanks
Sasagato said:
Hi I noticed that when I take a screenshot and I try to open it through the statusbar. The Gallery app gets freeze. Am I the only one that gas this bug?. Thanks
Click to expand...
Click to collapse
I'm not currently using ROM, but you can download the latest Build to see if it has already been fixed.
http://cm.s3root.ovh/builds/full/
No it isn't fixed In already on the latest build.
Thanks man!
@BenLue:
Is it possible that you use another mirror for your builds?
This one is very slow:
http://cm.s3root.ovh/builds/full/
provide gapps link here.
http://opengapps.org/
Check this one. I took ARM / 7.1 / nano and everything works fine.
Diese Website ist nicht erreichbar
Die Antwort von cm.s3root.ovh hat zu lange gedauert.
Versuchen Sie Folgendes:
Verbindung prüfen
Proxy und Firewall prüfen
ERR_CONNECTION_TIMED_OUT
This website is not available
The answer from cm.s3root.ovh took too long.
Try the following:
Check connection
Proxy and firewall
ERR_CONNECTION_TIMED_OUT
cm-14.1-20161222-UNOFFICIAL-jfltexx.zip
http://cm.s3root.ovh/builds/full/cm-14.1-20161222-UNOFFICIAL-jfltexx.zip
3,5-7,5 Byte/s - 190 MB von 361 MB
This one is very slow
OrangeFox Recovery Project
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* We're not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
INSTALLATION:
0. Backup your ROM, your data, your internal storage, and your settings/apps, to an external device
1. Download the OrangeFox zip file to your device
2. Reboot to your custom TWRP-based Recovery
3. Install the OrangeFox zip file as a normal zip
4. The device will automatically reboot into OrangeFox recovery after installation (allow this to happen)
5. Enjoy!
Frequently Asked Questions; Installation from stock recovery; MIUI OTA; Troubleshooting; Sundry Information:
* See
Guides and FAQ: https://wiki.orangefox.tech/en/guides
Setup OTA: https://wiki.orangefox.tech/en/guides/ota
Discussion about MIUI OTA for our device: https://forum.xda-developers.com/redmi-note-8/how-to/guide-flashing-miui-ota-rom-recovery-t4041591
How to report bugs properly: https://wiki.orangefox.tech/en/guides/report#what-you-must-provide
Credits
* TeamWin - for TWRP
* The OrangeFox Team - for your hard work
* mauronofrio - for bring up ginkgo device tree
* All our testers - for your patience and help
Features
Spoiler: Features
* Updated with latest TWRP commits
* Built-in support for installing init.d functionality
* Built-in support for installing Magisk
* Built-in Magisk Manager
* Flashlight
* Password, torch, led
* Support for Miui and Custom ROMs
* Superb new UI and themes
* OrangeFox theme engine:
- choice of theme (black, dark, etc)
- choice of color scheme
- choice of splash screen
* Alternative lockscreen
* And many more!
DOWNLOADS
https://orangefox.download/en/device/ginkgo
Screenshots
See https://files.orangefox.tech/Screenshots/R10/
Contact Us
Telegram: https://t.me/OrangeFoxChat
XDA:DevDB Information
OrangeFox Recovery Project, Tool/Utility for the Redmi Note 8
Contributors
Teguhpunya, DarthJabba9, MrYacha, mauronofrio
Source Code: https://gitlab.com/OrangeFox
Device Tree: https://gitlab.com/OrangeFox/device/ginkgo
Version Information
Status: Stable
Current Stable Version: R11.1
Stable Release Date: 2022-01-01
Current Beta Version: R11.1_1
Beta Release Date: 2021-08-09
Created 2020-03-04
Last Updated 2022-01-01
Changelog
--NEW--
Stable
R11.1 Stable
* Initial R11.1 stable build
* Updated prebuilt kernel
* Fixed stuck on OrangeFox splash screen in some cases
--OLD--
Stable
R11.0_1
* Fixed decryption in Android 11 and some MIUI
* Enabled turn off screen feature
R11.0
* Initial stable R11.0 build
* Manage a new Willow version (commit from mauronofrio)
R10.1_4
* Allow backup Persist image
* Add support for metadata encryption
* Fix status bar padding
* Fix problem with queueing zip for flashing
* Fix some issues related to backup
* Add support for block-based incremental OTA updates in AOSP ROMs that support this
* Fix issue "boot to fastboot" after successfully decrypted data from mount menu
* Update OrangeFox codebase to 2020.05.29
R10.1_3
* Prevent backup error caused by /data/per_boot
* Deal with backup issues relating to Dual-Apps (/data/vendor_ce/999)
* Reduced brightness values to reduce chance to get image retention
* Move status bar up behind notch
R10.1_2
* Updated Magiskboot to 20.2 stable
* Updated DM-verity and forceencrypt disabler (Menu - Gear icon - MIUI OTA - Patch ROM)
* Updated initd addon to anykernel3 version
* Fix languange translations
* many more
R10.1_1
* Initial R10.1 stable build.
* Fixed format partition problem.
* Added support for willow (Not tested).
* Updated magisk to 20.1.
* Enabled Nano editor.
Beta
R11.1_1
* Now supports encryption on all MIUI
Notes:
* Doesn't support Android 11's metadata encryption for now. It will stuck at OrangeFox's splash image
R11.1_0
* Updated to R11.1 ( See Changelogs at https://wiki.orangefox.tech/en/changelog/ )
* Added support for willow hwversion 18.31.0
* Changed max screen brightness
R10.1_4
- Continuation from R10.1_3 Stable
- Add support for metadata encryption (need more test)
- Fix reading device name (ginkgo as willow or vice versa) (need more test)
- Fix status bar padding
- Fix problem with queueing zip for flashing
- Update Magisk to 20.3 in Fox addons
- Update magiskboot
- Update languange translations
- and more…
Reserved
I have a "ginkgo", when I tried to flash the firmware there was an error that said: "E3004: This package is for ginkgo this is a willow" and obviously the package with the firmware was correct.
elfabo88 said:
I have a "ginkgo", when I tried to flash the firmware there was an error that said: "E3004: This package is for ginkgo this is a willow" and obviously the package with the firmware was correct.
Click to expand...
Click to collapse
If you are absolutely sure it's a ginkgo, and you are flashing a ginkgo rom/firmware then in the rom/firmware.zip you can go to META-INF/com/google/android/updater-script->here remove the following line:
Code:
getprop("ro.product.device") == "ginkgo" || abort("E3004: This package is for \"ginkgo\" devices; this is a \"" + getprop("ro.product.device") + "\".");
Now recovery won't verify your device and you can flash the proper rom. Although don't extract your full rom.zip. Just open(not extract) with winrar, go to the mentioned path and extract the updater-script, make changes with notepad++ and drag the new modified updater-script back in the same path.
elfabo88 said:
I have a "ginkgo", when I tried to flash the firmware there was an error that said: "E3004: This package is for ginkgo this is a willow" and obviously the package with the firmware was correct.
Click to expand...
Click to collapse
I have test build to solve that problem (hopefully). If you're interested to be tester, PM me.
Please release that version, same result here...
is this has data encryption issue?
if have what i have to do...
imonshahed said:
is this has data encryption issue?
if have what i have to do...
Click to expand...
Click to collapse
Format data after flash rom
imonshahed said:
is this has data encryption issue?
if have what i have to do...
Click to expand...
Click to collapse
select "disable force encryption" option in orangefox seetings > miui ota everytime you flash rom
Update please
Needs a twrp with metadata
Beta update version R10.1_4
R10.1_4 Beta
Changelog:
- Continuation from R10.1_3 Stable
- Add support for metadata encryption (need more test)
- Fix reading device name (ginkgo as willow or vice versa) (need more test)
- Fix status bar padding
- Fix problem with queueing zip for flashing
- Update Magisk to 20.3 in Fox addons
- Update magiskboot
- Update languange translations
- and more..
Stability on Beta and questions.
Hi there, I just got a RN8 and want to try out this recovery. It seems great and supports MIUI OTA updates.
How stable is the Beta version as compared to the Stable one? Is there any major improvements that I should choose the Beta one over the Stable one or vice versa?
Besides, this should support the MIUI.EU ROMs' OTA updates, right? And is its functionality is the same as TWRP (e.g. anything that TWRP supports, OrangeFox will also support) ?
Thank you!
PorridgePi said:
Hi there, I just got a RN8 and want to try out this recovery. It seems great and supports MIUI OTA updates.
How stable is the Beta version as compared to the Stable one? Is there any major improvements that I should choose the Beta one over the Stable one or vice versa?
Besides, this should support the MIUI.EU ROMs' OTA updates, right? And is its functionality is the same as TWRP (e.g. anything that TWRP supports, OrangeFox will also support) ?
Thank you!
Click to expand...
Click to collapse
This is, basically, TWRP on steroids.
If you know what you're doing, hop on the BETA train, otherwise, stable is the safest choice.
Sent from my Redmi Note 8 using Tapatalk
isamwise said:
This is, basically, TWRP on steroids.
If you know what you're doing, hop on the BETA train, otherwise, stable is the safest choice.
Click to expand...
Click to collapse
Ok thanks. I think I will stay with the stable build then since I'm a newbie at all this flashing stuff. Should I flash TWRP first and then flash OrangeFox from TWRP or flash OrangeFox directly? Is it the same result?
PorridgePi said:
Ok thanks. I think I will stay with the stable build then since I'm a newbie at all this flashing stuff. Should I flash TWRP first and then flash OrangeFox from TWRP or flash OrangeFox directly? Is it the same result?
Click to expand...
Click to collapse
It depends on your method of flashing...
If you extract the img from Orangefox archive, you can flash it directly from fastboot, otherwise, flash TWRP first, then flash the Orangefox zip from TWRP.
Sent from my Redmi Note 8 using Tapatalk
But will flashing from TWRP keep both TWRP and OrangeFox?
PorridgePi said:
But will flashing from TWRP keep both TWRP and OrangeFox?
Click to expand...
Click to collapse
No, it won't.
Sent from my Redmi Note 8 using Tapatalk
Thank you so much for clearing my doubts. I will flash OrangeFox directly then. I still need to wait for quite a while for my bootloader to be unlocked...
PorridgePi said:
Thank you so much for clearing my doubts. I will flash OrangeFox directly then. I still need to wait for quite a while for my bootloader to be unlocked...
Click to expand...
Click to collapse
You're welcome and good luck.
Sent from my Redmi Note 8 using Tapatalk
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
AICP
Android Ice Cold Project
AICP is known by everyone as the "Ice Cold Project" that started on a Desire HD years ago (2012) and since then has evolved into a mature ROM with the BEST community that you can find!!!
Until Android Lollipop, the ROM has always been based on AOKP. Unfortunately, since AOKP stopped development (but made a comeback later), we changed our base to CM.
With the re-brand of CM to LineageOS (LOS) we became LineageOS based with some tweaks from AOSP and then changed to be based on the "Ground Zero Open Source Project" (GZOSP) for Android Pie.
We changed again for Android Q with a base of AOSP repositories and some additions from LineageOS for device specific repositories.
If there are any bugs, either we will sort them out, if it concerns our code base. This ROM isn't LineageOS supported, so there is no need to report errors/bugs to them!!
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
*/
Feature list (rough overview)
In the beginning we would like to thank:
GZOSP team
LineageOS & CM (R.I.P.) team
@Maxwen and the rest of the OmniRom team
DU team
SlimRoms team
Resurrection Remix team
AOSiP team
Community
...
@LorD ClockaN
@eyosen
@semdoc
@SpiritCroc
@wartomato
@Miccia
plus the rest of the crazy bunch that we call "team"
...
We are paying for servers that build weeklies and everything that comes with this, so EVERY DONATION will really be appreciated and be used to cover those expenses.
Thank you!!
Latest Stable Release Version 15.0
Download link: https://dwnld.aicp-rom.com/
Note: No official builds for now.
Test builds: https://androidfilehost.com/?w=files&flid=309318
Please note that official builds will be deleted from our servers every month due to maintenance services.
We advise everyone to keep at least the latest or best working build on their device as a backup.
Maybe copy it to a cloud service or USB too.
Full Changelog link: https://dwnld.aicp-rom.com/
(Just click the changelog button next to the download link in the list of builds available for your device)
- You tell...
FAQ:
Before using the ROM:
Q. Can I have an ETA for the next build?
A. Yes, just look here to see what day your device is built on.
No.
Q. Does this ROM support custom kernels officially?
A. No. You can still use them, but discussion should go in the thread of the respective kernel. We don't offer support for bugs you might encounter while using them!
Q. Why doesn't this ROM support Xposed?
A. Xposed is a hack that is geared towards AOSP. Custom ROMs modify the framework a lot, so Xposed can cause a ton of issues on custom ROMs. Now it might work for you, however it is not to be discussed in this thread, and you should refrain from posting bug reports.
Flashing the ROM:
Q. What do I need to know before flashing?
A. Check the flashing instructions...
Q. Can the builds be dirty flashed over each other?
A. Yes, this is the usual behaviour on flashing a new official build by (or using) the build-in updater service. However, please make sure to backup your device regularly in case something goes wrong.
Q. How do I 'dirty flash' builds?
A. Wipe the System, Cache and ART/Dalvik cache. Flash the ROM, GApps (only needed if you wipe the system), your preferred root solution and reboot. Or just use the OTA app to preform that task for you.
Q. How do I flash kernel builds?
A1. If it's a .img file, boot into TWRP and go to the install page in TWRP, in the bottom right corner select "install image", select the desired kernel, then select "boot" as the destination, then swipe to flash, then go back to the install screen and install your root method again, if you don't want to loose root and reboot.
A2. If it's a flashable ZIP, you can flash it together with a ROM update or separately. Go to the install page in TWRP, choose the kernel zip (or add it to the flash queue right after the ROM zip). Then add your root method to the queue if you don't want to loose root. Now swipe to flash and reboot afterwards.
Using the ROM:
Q. I installed a bad theme and now I'm getting a bootloop, how do I fix it?
A. In TWRP, flash the substratum rescue zip that's in the substratum folder on the internal storage.
Q. I'm having issues with WhatsApp, how do I fix it?
A. Read this
Q. Do I need to provide a logcat if I'm reporting a bug?
A. If you want it to be fixed faster (or at all) then yes, you should definitely provide a logcat AND the model name. (Note: Please just link the logcat from your GDrive, Dropbox, etc. and do not post the content here. Thanks.)
Q. How do I get a logcat, what type should I get and more questions that can conveniently be answered by my pre-determined answer?
A1. Read this thoroughly. Also, here's a good app for getting logs: https://play.google.com/store/apps/details?id=com.tortel.syslog (Root needed).
A2. If you are already rooted, you can use the built-in feature to make a logcat and provide that. Just look into the others section in the AICP Extras main page.
The ROM should contain everything you need to enjoy Android Q. You don't need to install any Add-ons, simply download the latest ROM and GApps, then follow the flashing instructions and go!
If you want the device to run the ROM "rooted", you can flash a root solution of your choice after the ROM Zipfile.
It is STRONGLY recommended to fully wipe your device before flashing and please avoid restoring system apps and system data with Titanium Backup (or with any backup/restore app) as this can cause stability issues that are very hard to debug, restoring regular apps is fine though.
If you believe you know what you're doing - then fine, go ahead, but please don't complain if you experience any strange behavior.
How to flash for the first time:
(Again: Don't do it if you don't know!)
0. Install the latest stock ROM, ideally to both slots or use the LineageOS copy-partitions.zip
1. Boot a current TWRP
2. Factory reset
3. Flash the ROM zip
4. Optional: Reboot to recovery, then flash add-ons like GApps, Magisk etc.
How to upgrade from an older AICP build to a newer test build:
1. Make sure you have advanced reboot enabled: Settings/AICP Extras/Auxiliary buttons/Power menu/Advanced Reboot
2. Press the power button, select "Advanced" and "Recovery" to enter the inbuilt TWRP recovery
3. Flash the ROM zip
4. Optional: Reboot to recovery, then flash add-ons like GApps, Magisk etc.
Old instructions:
1. Download the ROM and GApps and transfer them to your device.
2. Boot to recovery (TWRP recommended).
3. Wipe the System, Cache, and Data (you might need to format the data partition!).
4. Flash the ROM Zipfile.
5. Flash the GApps (optional, needed for e.g. Google Playstore to work)
6. Reboot and set up your device, enable developer settings and in them OEM unlock/Advanced reboot/USB tethering.
7. Reboot back into TWRP recovery.
8. Flash the root solution of your choice (optional).
9. Reboot your device.
The procedure may vary from device to device and is a bit different on system updates!
The ROM has GApps persistence in between dirty flashes, so you only have to flash them once! This might differ on AvB Devices.
1. Flash latest stock ROM (52.1.A.0.672)
-> either with sony flashtool ("emma") or xperifirm + newflasher
2. Unpack the ROM tar
Code:
> tar -xzvf the_file_you_downloaded.tar.gz
2. Flash the ROM
Code:
> fastboot flash boot boot.img
> fastboot flash dtbo dtbo.img
> fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
> fastboot flash system system.img
> fastboot flash vendor vendor.img
> fastboot flash userdata userdata.img
Skip flashing userdata if you are comming from an older AICP 15.0 build and want to upgrade without losing your data!
3. Reboot to the ROM
Code:
> fastboot reboot
First boot might take a few minutes.
4. Optional: flash GApps and/or Magisk
- Enable Advanced Reboot in Settings / AICP Extras / Hardware buttons / Power menu
- Press power button, select Advanced > Recovery
- Use the inbuilt TWRP recovery to flash zips
Currently supported Root Solution:
Magisk stable
Magisk versions >= 20.3 don't usually need to be flashed on every dirty flash.
PREREQUISITE FOR OTA ("Over-The-Air" Updates):
TWRP recovery is needed to be able to flash using the built-in OTA app.
Please make sure that you are on the latest TWRP recovery, keep in mind that this could also be an unofficial version!
On encrypted devices you will have to enter your PIN/password in TWRP before the process starts.
Note: no official builds for now.
If you want to contribute to AICP, or want see what is being worked on/merged, feel free to visit our Gerrit code review system. (Link is at the bottom!!!)
Kernel source:
https://github.com/AICP/kernel_sony_sdm845/tree/q10.0
Device tree source:
https://github.com/AICP/device_sony_apollo/tree/q10.0
ROM & Additional links:
AICP's Homepage
AICP Gerrit Code Review
AICP sources on Github
AICP Download page for official builds and media content
AICP Discord Community
AICP Telegram channel for server notifications on official builds
Contributors:
- Olivier
- Sjll
- MartinX3 - thanks to him for allowing me to include his TWRP
- The sony open devices team and contributors
- LineageOS team
You want to see a "normal" night at the "DEV office", click here!!
XDA:DevDB Information
Android Ice Cold Project (AICP) 15.0 (q10.0) apollo (Sony XZ2 Compact), ROM for the Sony Xperia XZ2 Compact
Contributors
SpiritCroc
Source Code: https://github.com/AICP
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Unlocked bootloader
Version Information
Status: Testing
Created 2020-04-26
Last Updated 2020-10-18
Nice job!
SpiritCroc said:
Offline charging is broken, your device will boot when you connect a charger to a switched off
Click to expand...
Click to collapse
You may want to cherry-pick this kernel patch - it will fix offmode charging.
Olivier said:
Nice job!
You may want to cherry-pick this kernel patch - it will fix offmode charging.
Click to expand...
Click to collapse
Great, thank you!
Nice work!
(Damn! Not the first who comment!)
[emoji2957][emoji12]
don't need to flash sony oem? ( https://developer.sony.com/file/download/software-binaries-for-aosp-android-10-0-kernel-4-14-tama/ )
nikkdib said:
don't need to flash sony oem? ( https://developer.sony.com/file/download/software-binaries-for-aosp-android-10-0-kernel-4-14-tama/ )
Click to expand...
Click to collapse
No
It's a stock based ROM
MartinX3 said:
No
It's a stock based ROM
Click to expand...
Click to collapse
so in this rom will never be a gcam?
nikkdib said:
so in this rom will never be a gcam?
Click to expand...
Click to collapse
Yes, on the other side SODP and stock doesn't share the same bugs
nikkdib said:
so in this rom will never be a gcam?
Click to expand...
Click to collapse
In case the sony open devices program at any point in the future catches up with stock-based solutions concerning performance and functionality, I might switch to it as well.
For now, I experience the best results with a stock-based approach.
Would flashing this ROM fix the quiet microphone issue?
pakman5391 said:
Would flashing this ROM fix the quiet microphone issue?
Click to expand...
Click to collapse
The microphone is loud enough for me, but I don't know your issue personally, so your best bet is to try it out I guess
I uploaded a new build.
I have not tested a dirty flash this time, so I recommend to do a full backup to external storage in case something goes wrong if you try to upgrade from the previous AICP build (otherwise, you need a clean flash either way).
This time, it's a flashable zip (instead of images for fastboot), I have updated the install instructions accordingly.
This update features enforcing sepolicy (thanks to @Olivier and @Sjll for their work on the offcial lineage trees).
It might be ready for official AICP builds, but I don't know if it's worth it since I have not received any user feedback yet and don't know if there is actually demand... so if you use AICP, would be great if you could provide some feedback
I will definitely flash this when i'm in vacation. Needed a working phone to manage things because of a car accident.
Things are done now and it's time to say goodbye to pie.
Bug report: Proximity sensor not working
Edit: it seems that are other sensors too...
shamllakh said:
Bug report: Proximity sensor not working
Edit: it seems that are other sensors too...
Click to expand...
Click to collapse
These are working for me. Have you flashed the latest stock ROM (52.1.A.3.49) to both slots before flashing latest AICP?
SpiritCroc said:
These are working for me. Have you flashed the latest stock ROM (52.1.A.3.49) to both slots before flashing latest AICP?
Click to expand...
Click to collapse
I flashed the 52.1.A.3.49 using xperiafirmware flasher.
Then, i used the old method (fastboot method) to flash the AICP rom...
Did i miss anything?
shamllakh said:
I flashed the 52.1.A.3.49 using xperiafirmware flasher.
Then, i used the old method (fastboot method) to flash the AICP rom...
Did i miss anything?
Click to expand...
Click to collapse
So you flashed the old build (20200425_1435)? That one might need older firmware (around 52.1.A.0.672).
For the newest AICP build (20200731_1348), you need the new firmware (52.1.A.3.49) and the new instructions.
SpiritCroc said:
So you flashed the old build (20200425_1435)? That one might need older firmware (around 52.1.A.0.672).
For the newest AICP build (20200731_1348), you need the new firmware (52.1.A.3.49) and the new instructions.
Click to expand...
Click to collapse
Thanks a lot for the hint
I re-flashed the 25.1.A.3.49 via newflasher33, then flashed the AICP ROM via fastboot.
Now it works fine.
:fingers-crossed:
I finally found the time to flash my xz2c with this great rom and first i want to thank @Olivier for the official LOS base and second @SpiritCroc making this possible on this device!
As i use Aicp since years as my main Rom on my HTC One M8 i know what i'm getting with this.
However i had problems with installation: no matter what i did, i could not get the "zip" flashing to boot.
I first used Newflasher to update to the latest stock Rom, then i booted it twice to finish the carrier installation.
then i booted up twrp and flashed the zip file. Once, for the unused slot, then on the other slot. Spent a whole evening without succes...don't know what was wrong. Unfortunately i'm not used to this A/B flashing.
I then used this guide/files to extract the img files and flashed them with fastboot. That worked like a charm!
All in all this Rom has almost no problems and is faster than stock to me. Some things i noticed so far:
- biggest (and only real) problem (and as far as i heard it is the same on the LOS base) the ringtone/notification sound is is quieter than stock. I hope this can be solved, because stock was not really loud already
- flashlight brightness is not really bright, same like stock rom i think. I used some modded lib files from an Android 9 mod to make it brighter.
- i miss the option to change the visual appearance of the navbar button which was available until Android 9 in Aicp
- screen colors seems to be much more brighter, it looks much more better than stock to me
I will continue testing and see what i'll find.
All in all this Rom with it's many features is definitely worth flashing it!!!
!!! KUDOS !!!
AICP-q10.0_apollo_20200731_1348 is the first the most customizable and fully working ROM for Xperia XZ2C, if not the only one at all. I have not tested all the goods yet, but the most important features are here:
* fully working TWRP v3.4.0.0 - no issues with touch every time! until now the only TWRP working for me was the one booted with fastboot, all the flashed TWRPs had either touch issues or SD card issues
* SafetyNet basicIntegrity passed! - ctsProfile can be easily fixed with MagiskHide Props Config and therefor we have a full SafetyNet passed along with Magisk, allowing the banking and all the other sensitive apps to work
* WIFI
* Bluetooth (audio and calling)
* GPS
* fingerprint
* camera (but not the Sony one )
* encryption with TWRP decryption working
* SD card with exFAT
* notification LED
A few installations points from me
The ROM Installation was very easy and quick, but I was doing a total clean install. Here is what I did
1. Install Sony's stock ROM 52.1.A.3.49 with newflasher
2. Boot TWRP v3.4.0.0 stock version with fastboot
3. Flash AICP-q10.0_apollo_20200731_1348.zip (please note the messages, it should flash to "inactive slot B")
4. In TWRP select Reboot => Slot B => Recovery... to reboot the phone into recovery in Slot B
5. Flash Gapps
6. Format data (just in case, many times without format with other ROMs I got bootloop)
If you need fully working Magisk with full SafetyNet pass (steps are not logical and obvious but it works, tried it w few times):
1. Flash Magisk v20.1 or v20.3.... later versions breaks the basicIntegrity! If you have flashed later Magisk version simply use Magisk Unistaller zip in TWRP and flash v20.1 or v20.3
2. Boot the phone and update Magisk Manager to the latest version 8.0.2 (307) with an option inside the Magisk Manager
3. Go back to the TWRP and now you can flash Magisk v20.4 or v21.0 - this time flashing does not break the basicIntegrity and those versions are required to fix the ctsProfile
4. Install MagiskHide Props Config module in Magisk Manager
5. Install Terminal Emulator
6. Run terminal and enter the commands su followed by props
7. Change fingerprint to XZ2C with the following options: 1 => f => 27 => 20 => reboot
Ok, so what are the drawbacks? Well not much and more personal preferences I think:
1. Missing Sony's stock camera app. I tried to flash those zips below but I get "unknown error" when I try to launch the app. Do you think it would be possible to make the Sony camera work with your ROM?
https://androidfilehost.com/?w=search&s=semccamera
2. Missing custom navigation bar buttons. On the RR ROMs I used to work the most it was possible to add extra navigation buttons and assign customized actions for tap, long press, etc.
3. Slow auto brightness reaction (I can live with that)
4. Veeery low flashlight level (there was a solution for XZ1C to fix that, I have to dig a little bit to see if it can be done here as well)
5. Ambient Display - to show notifications on blocked screen
Please don't give up the project. There is not much going with the XZ2C custom development, the last and only "normal size" Android phone.
Do you think you can take a look at some of my "drawbacks" and try to fix them?
Do you think you will make some other ROMs for XZ2C in the future, like ResurrectionRemix, EvolutionX, HavocOS?
OrangeFox Recovery Project [R11.1]
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
#include <std_disclaimer.h>
/*
* Your warranty is partially void.
*
* We're not responsible for bricked devices, dead OTGs,
* thermonuclear wars, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this recovery
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
OrangeFox is FREE SOFTWARE
This recovery supports treble, MIUI and custom ROMs.
* OrangeFox version: R11.1
* Device codename: picasso
* Maintainer/authors build: masemoel
* OrangeFox source: GitLab
* Device tree: GitLab
Downloads
* Official OrangeFox builds here
NOTE: bear in mind that there is no build cicle. OrangeFox will be updated when it's needed.
This recovery is compatible with Redmi K30 5G, K30i 5G and K30 5G Racing editions.
Increase my motivation: PayPal
Donations to OFRP: Open Collective (they deserve as well!)
Installation
Update from your current recovery/older OF versions:
1. Download the OrangeFox zip file to your device.
2. Reboot to your current custom recovery.
3. Install the OrangeFox zip file as a normal zip.
4. The device will automatically reboot into OrangeFox recovery after installation.
5. Enjoy!
From fastboot:
1. Download the OrangeFox zip file to your PC.
2. Extract the recovery.img file from the zip.
3. Reboot your phone into fastboot mode.
4. Type the following command in your console (you need adb drivers to do this)
fastboot flash recovery recovery.img
From OFRP app [NEW!]
(Ideal if you don't own a PC)
Official builds can be flashed with the new OrangeFox app. Get it here (needs root access).
How to use OrangeFox recovery
* See the official OrangeFox guides.
* Source changelogs
News
* Stay tunned to my new releases (either test or stable) in my Telegram channel
* Chat with other picasso users in a global Telegram chat
* Follow the news from the OFRP team in their TG channel
Support
* Official OFRP Telegram support group
Bugs
* Check the release bugs and notes in the download page.
TIP: check current issues at the GitHub Issues tracker before reporting one (it may already exists).
Credits
* TeamWin - for TWRP.
* OrangeFox Team - for your hard and brilliant work.
Features
* Updated with latest TWRP changes
* Built-in support for installing init.d functionality
* Built-in support for installing Magisk
* Flashlight
* Password security.
* Support for MIUI and custom ROMs
* Superb new UI and themes
* OrangeFox theme engine:
- choice of theme (black, dark, etc)
- choice of color scheme
- choice of splash screen
* Alternative lockscreen
* And many more! Feel free to give a go
Version Information
Status: Stable
Current Stable Version: R11.1_2.2
Stable Release Date: 2023-01-25
Created: 2021-02-02
Last Updated: 2023-01-26
Important note:
Since 2.1 release, decryption is only working with Android 12 and upper. So, my suggestion is:
- Use R11.1_10 release if you are using Android 10 or 11.
- Use the latest release for Android 12, 13 or upper.
All the features left will work fine on all Android versions but if you want to decrypt your internal storage on recovery you must follow the indications from above.
Great WOrk Sir Mase!
New OFRP builds are getting cooked! [A10-A11]
NOTE: Remember that I've created a TG channel (not chat), so that you will get notified whenever a new build from my part is released! Join here
Changelog R11.0_1.3:
- Bump to 2021-02-03 OFR codebase, and version tag to R11_1.3.
- Some decryption improvements.
- Fixed OF getting overwritten in MIUI CN.
- Fixed ADB Sideload.
- Fixed assert errors related to building dates.
- Fixed EFS and other partitions that were mounted as read-only — you can backup and restore now in all partitions!
- Fixed some A11 issues with /tmp/install directories.
- Better status bar padding.
- Fixed magiskboot error from previous release.
- Functions that were disabled aren't visible now (such as Aroma Installer or app manager on A11...).
- Fixed some other minor bugs.
- Fixed Splash customization and some other improvements by OFR team.
Full device tree details
OFRP changes
Closed issues at GitHub (if any)
Update from older OF versions:
1. Download the OrangeFox zip file to your device.
2. Reboot to recovery.
3. Install the OrangeFox zip file as a normal zip.
4. The device will automatically reboot into OrangeFox recovery after installation.
5. Enjoy!
This project takes me some effort, time and bricks on my phone. If you wish, you can buy me a coofee here
Finally, I hope you enjoy this new, stable and customizable recovery!
masemoel said:
[Reserved]
Click to expand...
Click to collapse
Hi Bro, this recovery, is there bootloop for eu rom after flash magisk or not?
I remember that. On your AICP rom, we have to fix it manually.
Thank you
vudungcom said:
Hi Bro, this recovery, is there bootloop for eu rom after flash magisk or not?
I remember that. On your AICP rom, we have to fix it manually.
Thank you
Click to expand...
Click to collapse
OFR uses the magiskboot tool, which it's supposed to patch the boot images better. However, there is a tiny chance of facing bootloop, so I would make a backup of the boot image, so that you can easily restore again and boot normally if you face any bootloop issue.
New OFRP builds are up! [A10-A11]
NOTE: Remember that I've created a TG channel (not chat), so that you will get notified whenever a new build from my part is released! Join here
Changelog R11.0_1.4:
- Bump to 2021-02-19 OFR codebase, and version tag to R11.0_1.4.
- Fixed MTP not working after formatting data and rebooting.
- Fixed fastbootd.
- Full NTFS support (useful for OTG).
- Removed status bar offset.
- Minor improvements.
Full device tree details
OFRP changes
Closed issues at GitHub (if any)
Update from older OF versions:
1. Download the OrangeFox zip file to your device.
2. Reboot to recovery.
3. Install the OrangeFox zip file as a normal zip.
4. The device will automatically reboot into OrangeFox recovery after installation.
5. Enjoy!
This project takes me some effort, time and bricks on my phone. If you wish, you can buy me a coofee here
Finally, I hope you enjoy this new, stable and customizable recovery!
Looking forward to that MTP fix. I don't feel safe pushing the files though ADB, sometimes it looks like it works but doesn't.
Lot of thanks to masemoel for his work!
New OF oficial builds are up! [A10-A11]
NOTE: Remember that I've created a TG channel (not chat), so that you will get notified whenever a new build from my part is released! Join here
IMPORTANT NOTE: A10 build from today is UNOFFICIAL and won't receive updates anymore! So R11.0-1.5 is the last stop for android Q.
Changelog R11.0_1.5:
- Bump version tag to R11.0_1.5.
- Add hide notch option.
- Update status bar paddings (almost perfect).
- Add exFAT support.
- Fixed Migrate mounting data error.
- Some decryption improvements by QCOM.
Full device tree details
OFRP changes
Closed issues at GitHub (if any)
Update from older OF versions:
1. Download the OrangeFox zip file to your device.
2. Reboot to recovery.
3. Install the OrangeFox zip file as a normal zip.
4. The device will automatically reboot into OrangeFox recovery after installation.
5. Enjoy!
Update from OFRP app [NEW!]
Official builds can be flashed with the new OrangeFox app. Get it here (needs root permissions).
This project takes me some effort, time and bricks on my phone. If you wish, you can buy me a coffee here
Finally, hope you enjoy this first official release!
Incredibly nice! It's amazing that the best recovery for the K30 5G is now official.
New OF official beta build is up! [A11]
NOTE: Remember that I've created a TG channel (not chat), so that you will get notified whenever a new build from my part is released! Join here
Changelog R11.1_1.6:
- Fully fix MTP issues after formatting data.
- Some decryption improvements: attempt to fix decryption on CN ROM.
- Bump to new R11.1 source and version tag to R11.1_1.6.
- Minor additions.
Full device tree details
OFRP changes
Closed issues at GitHub (if any)
Update from older OF versions:
1. Download the OrangeFox zip file to your device.
2. Reboot to recovery.
3. Install the OrangeFox zip file as a normal zip.
4. The device will automatically reboot into OrangeFox recovery after installation.
5. Enjoy!
Update from OFRP app [NEW!]
Official builds can be flashed with the new OrangeFox app. Get it here (needs root permissions).
This project takes me some effort, time and bricks on my phone. If you wish, you can buy me a coffee here
Finally, hope you enjoy this new official release!
New OF official stable build is up! [A10+]
NOTE: Remember that I've created a TG channel , so that you will get notified whenever a new build from my part is released! Join here
Changelog R11.1_1.7:
- First stable R11.1 release for picasso.
- Fixed system_root typo (caused flashing errors in some ROMs).
- Switch totally to twrp-common decryption tree (fixes decryption in stock CN ROM).
Full device tree details
OFRP changes
Closed issues at GitHub (if any)
Update from older OF versions:
1. Download the OrangeFox zip file to your device.
2. Reboot to recovery.
3. Install the OrangeFox zip file as a normal zip.
4. The device will automatically reboot into OrangeFox recovery after installation.
5. Enjoy!
Update from OFRP app [NEW!]
Official builds can be flashed with the new OrangeFox app. Get it here (needs root permissions).
This project takes me some effort, time and bricks on my phone. If you wish, you can buy me a coffee here
Finally, hope you enjoy this first stable official release!
Can I use this recovery on Redmi K30i 5G?
Little Zed said:
Can I use this recovery on Redmi K30i 5G?
Click to expand...
Click to collapse
Yes
New OF official stable build is up! [A10+]
NOTE: Remember that I've created a TG channel , so that you will get notified whenever a new build from my part is released! Join here
Changelog R11.1_1.8:
- Fixed wrong CPU temp info.
- Fixed all decryption issues with MIUI 12.x CN ROM.
- Enabled backup and flash features to dynamic partitions.
- Bump version tag to R11.1_1.8.
Full device tree details
OFRP changes
Closed issues at GitHub (if any)
Update from older OF versions:
1. Download the OrangeFox zip file to your device.
2. Reboot to recovery.
3. Install the OrangeFox zip file as a normal zip.
4. The device will automatically reboot into OrangeFox recovery after installation.
5. Enjoy!
Update from OFRP app [NEW!]
Official builds can be flashed with the new OrangeFox app. Get it here (needs root permissions).
This project takes me some effort, time and bricks on my phone. If you wish, you can buy me a coffee here
Finally, hope you enjoy this new official, stable release!
New OF official stable build is up! [A10-A12]NOTE: Remember that I've created a TG channel , so that you will get notified whenever a new build from my part is released! Join here
Changelog R11.1_1.9:- Bump version tag to R11.1_1.9.
- Fixed bootloop issues with Android 12.
- Updated prebuilt Magisk zip to 23.0.
- OTA feature is now enabled by default.
- Update to latest R11.1 improvements.
Full device tree details
OFRP changes
Closed issues at GitHub (if any)
Update from older OF versions:1. Download the OrangeFox zip file to your device.
2. Reboot to recovery.
3. Install the OrangeFox zip file as a normal zip.
4. The device will automatically reboot into OrangeFox recovery after installation.
5. Enjoy!
Update from OFRP app [NEW!]Official builds can be flashed with the new OrangeFox app. Get it here (needs root permissions).
Finally, this project takes me some effort, time and bricks on my phone. If you wish, you can buy me a coffee here
I hope you enjoy this new official, stable release!
Can I flash it to my K30 4G，Is that any problem？
StrangeCat0711 said:
Can I flash it to my K30 4G，Is that any problem？
Click to expand...
Click to collapse
No. Flash the official build for phoenix (Redmi K30/POCO X2)
New OFRP official stable build is up!NOTE: Remember that I've created a TG channel , so that you will get notified whenever a new build from my part is released! Join here
Changelog R11.1_2.1:- Allow installation of files higher than 4GB.
- Support Android 12 decryption.
- Release based on fox_12.1 source.
- Add EROFS support.
- Other enhancements.
Full device tree details
OFRP changes
Closed issues at GitHub (if any)
Update from older OF versions:1. Download the OrangeFox zip file to your device.
2. Reboot to recovery.
3. Install the OrangeFox zip file as a normal zip.
4. The device will automatically reboot into OrangeFox recovery after installation.
5. Enjoy!
Update from OFRP app [NEW!]Official builds can be flashed with the new OrangeFox app. Get it here (needs root permissions).
Finally, this project takes me some effort, time and bricks on my phone. If you wish, you can buy me a coffee here
I hope you enjoy this new official, stable and decryptable release!
New OFRP official stable build is up!NOTE: Remember that I've created a TG channel , so that you will get notified whenever a new build from my part is released! Join here
Changelog R11.1_2.2:- Update prebuilt kernel.
- Hide some low-level partitions for a normal backup (you can still find them on advanced backup!).
- Support decryption for all A13 ROMs, even those which doesn't support wrappedkey (such as SparkOS).
- Fixed CPU temperature always showing 0º.
- Sync with latest source and update to R11.1_2.2 version.
Full device tree details
OFRP changes
Closed issues at GitHub (if any)
Update from older OF versions:1. Download the OrangeFox zip file to your device.
2. Reboot to recovery.
3. Install the OrangeFox zip file as a normal zip.
4. The device will automatically reboot into OrangeFox recovery after installation.
5. Enjoy!
Update from OFRP appOfficial builds can be flashed with the new OrangeFox app. Get it here (needs root access).
Finally, this project takes me some effort, time and bricks on my phone. If you wish, you can buy me a coffee here
I hope you enjoy this new official, stable and decryptable release!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LegionOS for Redmi K30 5G (picasso)
Code:
#include <std_disclaimer.h>
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead OTGs,
* thermonuclear war or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you. Hard & a lot.
*
What is this?
LegionOS is an AOSP 11 based ROM.
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Downloads
Firmware + vendor CN base (always use latest available)
Official builds
Gapps -> FlameGApps · LegionOS GApps · NikGApps (flash them only if you decide to go with the Vanilla version)
Magisk
This ROM is compatible with K30 5G,
K30i 5G and K30 5G Racing editions.
Bugs
Wrong fast charging info in lockscreen (but charges fast).
You tell me.
Installation
Use latest OFRP to flash.
Clean flash:
Flash recommended CN base.
Flash LegionOS zip.
Flash Magisk (optional).
Format data. Also wiping cache & dalvik is recommended.
Reboot and enjoy!
Dirty flash:
Flash LegionOS zip.
Flash Magisk (optional).
Wipe cache & dalvik.
Reboot and enjoy!
News & support:
K30 5G Updates channel
K30 5G English chat
LegionOS chat (not picasso-specific)
LegionOS news channel
Stay tunned to my new releases (either test or stable) in my Telegram channel
Sources:
Device tree
Kernel
Vendor
LegionOS
Credits:
MangoTM (for his reworked tree and his help).
jjhitel (for his initial work to have R totally stable).
LegionOS team (for this awesome ROM).
Many more contributors.
Version Information
Status: Stable
Current Stable Version: 3.14 (Android 11)
Maintainer: masemoel
Security patch level: 2021-10-05
SELinux status: Enforcing
Stable Release Date: 2021-10-13
Created: 2021-03-21
Last Updated: 2022-01-31
[Reserved]
hi, this rom can use gesture zoom on story fb,instagram and google map ?
TQHuuThuan said:
hi, this rom can use gesture zoom on story fb,instagram and google map ?
Click to expand...
Click to collapse
Hello, sorry for my late reply.
I tested on Instagram stories and it works. It's inside Accesibility settings. It also works on launcher, so yeah it seems to work under any app.
New stable update is up!
NOTE: I've created a TG channel (not chat), so that you will get notified whenever a new build from my part is released! Join here
Changelog 29-3-2021:
- Fixed autobrightness not working.
- SELinux is now enforcing.
- Source updated (fixes bubbles chat and adds more features).
Full device tree details
How to upgrade:
Dirty flash should be ok (if you face weird issues/bootloop, then try a clean flash before reporting them!).
Dirty flash:
1. Reboot to recovery (latest OFRP version recommended)
2. Flash ROM.
3. Flash GApps (if you had).
4. Flash Magisk (optional, as always).
5. Wipe dalvik & cache.
6. Reboot to system (realize that first boot might take longer than usual).
If you face any flashing error and the ROM doesn't flash succesfully, take recovery.log and send here.
Clean flash:
1. Download the ROM and GApps package (optional) and transfer them to your device.
2. Boot to recovery (OFRP recommended).
5. Flash xiaomi.eu (v21.3.17/24 is strongly recommended).
6. Flash ROM.
7. Flash GApps (optional, needed for. Google Playstore or Google Camera to work).
8. Flash Magisk (optional as well).
9. Format data and wipe cache partition.
10. Reboot (realize that first boot might take longer than usual).
11. Enjoy!
New stable update is up!
NOTE: I've created a TG channel (not chat), so that you will get notified whenever a new build from my part is released! Join here
Changelog 13-5-2021:
- Update prebuilt kernel to MIUI EU 21.5.12.
- Merged May 2021 security patch.
- Source updated to LegionOS 3.8 source.
- Enabled LTE+ icon.
- Added camera pinner (improves its performance).
- Boosted initial bootup time.
- Added some gaming, battery-saving and performance props.
- Updated brightness screen values.
- Added Clear Speaker and Touch Gaming profiles to XiaomiParts.
- Bluetooth improvements.
- Addressed some SELinux denials.
Full device tree details
How to upgrade:
Dirty flash should be ok (if you face weird issues/bootloop, then try a clean flash before reporting them!).
Dirty flash:
1. Reboot to recovery (latest OFRP version recommended)
2. Flash ROM.
3. Flash GApps (if you had).
4. Flash Magisk (optional, as always).
5. Wipe dalvik & cache.
6. Reboot to system (realize that first boot might take longer than usual).
If you face any flashing error and the ROM doesn't flash succesfully, take recovery.log and send here.
Clean flash:
1. Download the ROM and GApps package (optional) and transfer them to your device.
2. Boot to recovery (OFRP recommended).
5. Flash xiaomi.eu (v21.5.12 or higher is strongly recommended).
6. Flash ROM.
7. Flash GApps (optional, needed for. Google Playstore or Google Camera to work).
8. Flash Magisk (optional as well).
9. Format data and wipe cache partition.
10. Reboot (realize that first boot might take longer than usual).
11. Enjoy!
Redmi K30i 5G don't have OFRP. Can I use TWRP?
New stable official update is up!
NOTE: I've created a TG channel (not chat), so that you will get notified whenever a new build from my part is released! Join here
Changelog 23-5-2021:
- Update prebuilt kernel to MIUI EU 21.5.20.
- First official build, with GApps included.
- Source updated to LegionOS 3.9 source (3.9 changelog here).
- Added face unlock feature.
- Some bluetooth audio improvements.
- Some performance tweaks.
- Include APN configs from stock (fixes data mobile issues in some countries).
- Increased status bar padding at the left of the status bar.
- Added Notch bar killer overlay to developer options (lets you fill the screen completely in landscape mode).
- Added Hide notch overlay to developer options (fills the status bar space empty).
Full device tree details
How to upgrade:
Clean flash is recommended!
Clean flash:
1. Download the ROM and transfer it to your device.
2. Boot to recovery (OFRP recommended).
5. Flash xiaomi.eu base (v21.5.20 or higher is strongly recommended).
6. Flash ROM.
7. Flash Magisk (optional).
8. Format data and wipe cache partition.
9. Reboot (realize that first boot might take longer than usual).
10. Enjoy!
Hey Google Don't work when screen is off
waiphyoaung88 said:
Hey Google Don't work when screen is off
Click to expand...
Click to collapse
You mean the "OK Google" wake-up?
masemoel said:
You mean the "OK Google" wake-up?
Click to expand...
Click to collapse
yes
HI!ROMER.Many of the settings in ROM are still in English, even if the system language has been changed to Chinese
Unite_LD said:
HI!ROMER.Many of the settings in ROM are still in English, even if the system language has been changed to Chinese
Click to expand...
Click to collapse
Yes, no one translated the LegionSettings to Chinese yet... Feel free to do it!
great work,keep it up!
New stable official update is up!
NOTE: I've created a TG channel (not chat), so that you will get notified whenever a new build from my part is released! Join here
Changelog 30-06-2021:
- Update prebuilt kernel and blobs to MIUI EU 21.6.23.
- Source updated to LegionOS 3.10 source (see LegionOS 3.10 changelog here).
- Fixed "OK" Google Assistant issues.
- Enabled more audio features (see under developer options).
- SafetyNet now passes even without MagiskHide.
- Added FPS overlay info.
- Fixed screen lag during screen recording.
- Added bass booster preset in Mi Sound Enhacer.
- Implemented dynamic refresh rate (improves battery life).
- Some performance tweaks.
Full device tree details
How to upgrade:
Clean flash is recommended!
With OTA, dirty may be enough though... (just ensure you have the OTA feature enabled in your recovery).
Clean flash:
1. Download the ROM and transfer it to your device.
2. Reboot to recovery.
5. Flash xiaomi.eu base (v21.5.20 or higher is strongly recommended).
6. Flash ROM.
7. Flash Magisk (optional).
8. Format data and wipe cache partition.
9. Reboot (realize that first boot might take longer than usual).
10. Enjoy!
Hi, masemoel.
Thank you very much for the ROM!
I flashed LegionOS-v3.10-picasso-20210630-OFFICIAL-GAPPS.zip (build: RQ3A.210605.005) from that MEGA link. The ROM is great. The animation and design are pretty smooth. It has a fantastic overall experience!
Almost everything works well, except that:
1. Google Camera (version: 8.2.400.377695972.29) always keeps stopping, even though the phone camera works well in various other apps. I am sure that every other GApps bundled are functioning. I tried to clean its storage & cache several times and uninstall & re-install the app from the Play Store. But it does not help.
2. Pixel Launcher won't show the popup for adding new shortcut icons to the home screen. e.g. the weather shortcut from the Google app. But a shortcut can be added via long pressing app icons and dragging manually. I tried to clean its storage & cache and reset its all permissions several times. But it does not help. (Not sure whether it is specific to the ROM or a general problem of Pixel Launcher itself).
Hi, masemoel.
I downloaded and installed the latest image ( LegionOS-v3.10-picasso-20210630-OFFICIAL-GAPPS.zip ) , but found that the back gesture did not work.
Is there something wrong with my installation? How do I fix it?
New stable official update is up!
NOTE: I've created a TG channel (not chat), so that you will get notified whenever a new build from my part is released! Join here
Changelog 16-07-2021:
- Source updated to LegionOS 3.11 source (see LegionOS 3.11 changelog here).
- Update prebuilt kernel and blobs to MIUI EU 21.7.14.
- Fixed Wi-Fi display not working.
- Fixed some GPS issues.
- Fixed low signal with dual-SIM.
- Fixed GApps not included in GApps OTA package.
Full device tree details
How to upgrade:
Clean flash is recommended!
With OTA, dirty may be enough though... (just ensure you have the OTA feature enabled in your recovery).
Clean flash:
1. Download the ROM and transfer it to your device.
2. Reboot to recovery.
5. Flash xiaomi.eu base (v21.7.14 or higher is strongly recommended).
6. Flash ROM.
7. Flash Magisk (optional).
8. Format data and wipe cache partition.
9. Reboot (realize that first boot might take longer than usual).
10. Enjoy!
1.Is it contains weather widget?Just like most Chinese rom does?
2.How to use NFC to simulate the IC Card?
New stable official update is up!
NOTE: I've created a TG chat, so that you will get notified whenever a new build from my part is released, and also direct support from me! Join here
Changelog 14-08-2021:
- Source updated to LegionOS 3.12 source (see LegionOS 3.12 changelog here).
- Kernel updated to EU 21.8.11 one.
- Improved performance.
- Fixed laggy media in Google Photos.
- Decreased drain on idle.
- Added more BT and RIL configs.
- Added dynamic refresh rate options.
- Improved HDR rendering performance on GCams.
- Added NFC Mifare classic support.
Full device tree details
How to upgrade:
Clean flash is mandatory!
Clean flash:
1. Download the ROM and transfer it to your device.
2. Reboot to recovery.
5. Flash xiaomi.eu base (v21.8.11 or higher is strongly recommended).
6. Flash ROM.
7. Flash Magisk (optional).
8. Format data and wipe cache partition.
9. Reboot (realize that first boot might take longer than usual).
10. Enjoy!