LE2125_11_F.16 : GOOGLE Drive link
MD5 : B20450405F31E6644373746DA2050B55
SHA-256 : 80ca7ea84dc0fa859ae5e097c8047639091fdc28f919b891e909eb18c3ff7c01
CRC32 : 91731EB9
boot.img and magisk patched boot.img in the link.
what is the easiest way to get out of a custom rom and go to oos a13?
I already made this change once and I had to flash the msm to oxygen 11, then update 2x via OTA and then install the oxygen 13 local update.. I find it unnecessarily time consuming, could there be a way to flash msm in more up-to-date versions of oxygen
1thomas said:
what is the easiest way to get out of a custom rom and go to oos a13?
I already made this change once and I had to flash the msm to oxygen 11, then update 2x via OTA and then install the oxygen 13 local update.. I find it unnecessarily time consuming, could there be a way to flash msm in more up-to-date versions of oxygen
Click to expand...
Click to collapse
I think you have no choice and this is the safest way to switch from a custom rom to oos a13 it's MSM TOOL, be careful to backup your files beforehand.
use this MSM Tool Oxygen package OS 11.2.10.10 (global).
When the installation of the F16 version is complete
For information the unlocking of the bootloader delete the setting for the zram.
Once the rom is installed (LE2125_11_F.16), the bootloader unlocked and your phone rooted, you can reactivate the zram by performing these commands (in bold) :
note: you must enable usb debugging to run the adb shell command.
C:\adb>adb shell
OnePlus9Pro:/ $ su
OnePlus9Pro:/ # resetprop persist.sys.oplus.nandswap.condition true
OnePlus9Pro:/ # echo 1>/sys/block/zram0/hybridswap_dev_life
1|OnePlus9Pro:/ # reboot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
buu'buu said:
I think you have no choice and this is the safest way to switch from a custom rom to oos a13 it's MSM TOOL, be careful to backup your files beforehand.
use this MSM Tool Oxygen package OS 11.2.10.10 (global).
For information the unlocking of the bootloader delete the setting for the zram.
Once the rom is installed (LE2125_11_F.16), the bootloader unlocked and your phone rooted, you can reactivate the zram by performing these commands (in bold) :
C:\adb>adb shell
OnePlus9Pro:/ $ su
OnePlus9Pro:/ # resetprop persist.sys.oplus.nandswap.condition true
OnePlus9Pro:/ # echo 1>/sys/block/zram0/hybridswap_dev_life
1|OnePlus9Pro:/ # reboot
Click to expand...
Click to collapse
How do I disable zram? And why would you do that? I have always used the msm tool without any problems, I had never heard about it
1thomas said:
How do I disable zram? And why would you do that? I have always used the msm tool without any problems, I had never heard about it
Click to expand...
Click to collapse
Nothing to do with MSM.
I just want to say that once you finish installing the F16 version, then unlocking the bootloader causes you to lose the RAM setting. If you don't need this option, you don't have to do anything.
buu'buu said:
Nothing to do with MSM.
I just want to say that once you finish installing the F16 version, then unlocking the bootloader causes you to lose the RAM setting. If you don't need this option, you don't have to do anything.
Click to expand...
Click to collapse
oh yes i got it, thanks for the info
1thomas said:
oh yes i got it, thanks for the info
Click to expand...
Click to collapse
Ok we understand each other now
Boot Image
Here's a Magisk boot image that boots with modules disabled to recover from a bootloop. Someone will need it...
CSnowRules said:
Boot Image
Here's a Magisk boot image that boots with modules disabled to recover from a bootloop. Someone will need it...
Click to expand...
Click to collapse
Thank you so much
Sorry but can you upload another place? Please
The original Boot.img.....
kovacsabesz said:
Sorry but can you upload another place? Please
The original Boot.img.....
Click to expand...
Click to collapse
First post
how to switch coloros 12.1 to oos13 ?
It looks like twrp is now working with android 13 properly...
what other backup tool could you recommend?
Swift Backup from playstore
sweet been using f11 all week ! wonder if launcher crashing issue is fixed
How do I install this?
I'm currently on OOS11 and can't install 12 because that breaks touchscreen. Oh and my fastbootD mode remains without driver, device shows up as LE2123.
bmaggot said:
How do I install this?
I'm currently on OOS11 and can't install 12 because that breaks touchscreen. Oh and my fastbootD mode remains without driver, device shows up as LE2123.
Click to expand...
Click to collapse
What do you mean by breaks touchscreen, I don't understand. Touch screen no longer responds to touch?
buu'buu said:
What do you mean by breaks touchscreen, I don't understand. Touch screen no longer responds to touch?
Click to expand...
Click to collapse
Correct. Had to use MSM but it's version 11.
bmaggot said:
Correct. Had to use MSM but it's version 11.
Click to expand...
Click to collapse
Yes, MSM 11.2.10.10 is the latest version for oxygenOS. Then you will only have to do all the incremental updates, it's a bit of a long process but it's clean.
buu'buu said:
Yes, MSM 11.2.10.10 is the latest version for oxygenOS. Then you will only have to do all the incremental updates, it's a bit of a long process but it's clean.
Click to expand...
Click to collapse
I wonder if it's possible to do a full clean install of this somehow. I just tried to do incremental and one successful update and then LE2123_11.C.47_1470_202203102117 also broke my touch.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It have been about 2 years, I finally get a U11 plus to make TWRP device tree with working decrypt function.
Source: https://github.com/sabpprook/android_device_htc_ocm
Please download latest TWRP build in following link.
[Android 8.0]
twrp-3.3.1-0-ocm_171001.img
twrp-3.3.1-0-ocm_171201.img
twrp-3.3.1-0-ocm_180601.img
twrp-3.3.1-0-ocm_180901.img
twrp-3.3.1-0-ocm_181001.img
twrp-3.3.1-0-ocm_181101.img
[Android 9.0]
PS. watch out the last 6 digits at the filename, it must equal to your system's android patch level. e.g. 2017-12-01 (Dec, 2017) = 171201, otherwise TWRP will not decrypt data partition.
PS2. U11+ already get Android Pie update, but this update will break data decrypt function in TWRP recovery.
@nkk71, thanks all the works you've done for us.
Thank you very much!
https://i.imgur.com/71t8xrY.png
https://i.imgur.com/qebNB0C.png
https://i.imgur.com/ubxYZsN.png
https://i.imgur.com/gsbaG2K.png
https://i.imgur.com/xIW8llN.png
https://i.imgur.com/Fzrdhwt.png
Awesome!!
yay. now to get more dev support behind this!
excellent! Please, try to put up a github repo for it, if not already
Hopefully it works fine.
If HTC rolls out kernel sources, I might try some blind development, as I don't have the device, but wanna support it.
Should you need to unlock the official htcdev before they can put?
mapleshadow said:
Should you need to unlock the official htcdev before they can put?
Click to expand...
Click to collapse
Yes, unlock then you can boot it.
Thanks for this! Going to try and get it up and running later today - Need to unlock the BL first.
Thanks for this however it doesn't seem to work for me. I've unlocked the bootloader, rebooted into bootloader mode via adb (adb reboot bootloader), tried to boot the twrp image (fastboot boot twrp-3.1.1-2_unofficial-ocm_2.img) and all I get is a black screen even though the commands seem to work at first:
fastboot boot twrp-3.1.1-2_unofficial-ocm_2.img
downloading 'boot.img'...
OKAY [ 0.894s]
booting...
OKAY [ 10.112s]
finished. total time: 11.006s
Click to expand...
Click to collapse
Any idea what's going on?
aurelienlux said:
Thanks for this however it doesn't seem to work for me. I've unlocked the bootloader, rebooted into bootloader mode via adb (adb reboot bootloader), tried to boot the twrp image (fastboot boot twrp-3.1.1-2_unofficial-ocm_2.img) and all I get is a black screen even though the commands seem to work at first:
Any idea what's going on?
Click to expand...
Click to collapse
Did you flash the custom recovery ..?
P.S. Nothing of linked below worked out?
http://featuresunlocker.com/root-install-twrp-recovery-htc-u11/
Yet sent from my amazing silver U11
jauhien said:
Did you flash the custom recovery ..?
P.S. Nothing of linked below worked out?
Yet sent from my amazing silver U11
Click to expand...
Click to collapse
I didn't flash since I wanted to test it out before using the fastboot boot command recommended in the original post. However this does not seem to work. I wanted to get twrp running so I could use magisk for root
Went ahead and flashed it anyway and I'm happy to report that it worked and did not brick my device. So I still don't know why it won't let me fastboot boot but at least TWRP is now installed.
aurelienlux said:
Went ahead and flashed it anyway and I'm happy to report that it worked and did not brick my device. So I still don't know why it won't let me fastboot boot but at least TWRP is now installed.
Click to expand...
Click to collapse
Be aware that you're now lacking the ability to ota update if you cannot get ahold of a stock recovery.
That's why booting only and making a backup of stock recovery boot and full system partition, is highly recommended.
tbalden said:
Be aware that you're now lacking the ability to ota update if you cannot get ahold of a stock recovery.
That's why booting only and making a backup of stock recovery boot and full system partition, is highly recommended.
Click to expand...
Click to collapse
I bought the right version of the stock rom I'm running from en.pars-hamrah.com. It's a slightly sketchy looking site and it cost me 9$ but it should allow me to go back to stock easily
I'll share it here if people are interested. It's version 1.05.400.13 which is the latest version for the Hong Kong version
aurelienlux said:
I bought the right version of the stock rom I'm running from en.pars-hamrah.com. It's a slightly sketchy looking site and it cost me 9$ but it should allow me to go back to stock easily
Click to expand...
Click to collapse
OK, that's very professional. :good:
Just others be aware that you should make sure you have a way backwards.
aurelienlux said:
I bought the right version of the stock rom I'm running from en.pars-hamrah.com. It's a slightly sketchy looking site and it cost me 9$ but it should allow me to go back to stock easily
I'll share it here if people are interested. It's version 1.05.400.13 which is the latest version for the Hong Kong version
Click to expand...
Click to collapse
That would be fantastic and very good of you if you could share it. Many thanks!
@nkk71 Any idea of decryption problem?
Seems "/firmware" not symlink and "/vendor/bin/qseecom" sepolicy not set correctly
sabpprook said:
@nkk71 Any idea of decryption problem?
Seems "/firmware" not symlink and "/vendor/bin/qseecom" sepolicy not set correctly
View attachment 4342230
Click to expand...
Click to collapse
Looks like you're building in android 7.1 for Oreo decrypt, won't work without the needed sepolicy changes and plat/non_plat contexts, please check the current gerrit updates for the standard HTC U11:
TWRP vold_decrypt patch: https://gerrit.omnirom.org/c/26652/
EDIT2: U11 Oreo decrypt device tree changes needed for a 7.1 build: https://gerrit.twrp.me/c/2756/
If you end up with decryption successful, but it doesn't actually mount /data, then you may even need an updated kernel https://gerrit.twrp.me/c/2761/
which is what we needed. EDIT: Obviously that's a U11 kernel update not a U11+ one, so don't try to use that kernel
Some things will still get changed. I also recommend you build in real DEBUG mode, the straces have much more info than a log or dmesg. by using TW_CRYPTO_SYSTEM_VOLD_DEBUG := true
Prot02018 said:
That would be fantastic and very good of you if you could share it. Many thanks!
Click to expand...
Click to collapse
There you go: https://drive.google.com/open?id=1nkzK_wbSgC6HSlOsNqOc79f94p7v_3wz
That's version 1.05.400.13. I managed to decrypt it successfully using the latest RUU Decryption Tool on Windows. I have a decrypted boot.img and system.img but I haven't yet uploaded those to my drive.
Waiting for your Good news.
This is the Pixel 2 XL's TOOL ALL IN ONE Discussion Thread more info and download go to the Original Thread
TOOL ALL IN ONE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ADVANCED OPTIONS
FUNCTIONS
Install Drivers
Install Drivers
Unlock Bootloader
Lock Bootloader (use carefully)
Flash TWRP Recovery
Flash Stock Recovery
Flash Stock Factory Image
Automatic ROOT
Install APKs
Uninstall APKs
Take a Screenshot
Take a Screen Reocrd
Flash Partitions
Erase All Data (This function can decrypt the phone)
Reboot Phone
Update the Tool to latest version
Update Adb and Fastboot to latest version
Set Adb and Fastboot priviliges in system wide
Install Zip directly from PC (Required TWRP on phone)(These functions work perfectly on my pc but i have perfect adb drivers on my pc and perfect TWRP on my phone)
Flash Fastboot ROM
Delete downloaded files
ADB File Manager
DEVICE LIST
If you want you can send a request to add a new device here:
New Device Request Form
Device List
DOWNLOAD
Original Thread
DONATE LINK
If you want to support the project please consider making a donation, thanks.
Cant wait to try it
Toejam1998 said:
Cant wait to try it
Click to expand...
Click to collapse
Tell me if it's work for you
I'll wait for a few others as well
Finally i got a solution for Nexus and Pixel Factory Image flash, now it works perfectly
does this do the critical unlock as well?
razgriz1234 said:
does this do the critical unlock as well?
Click to expand...
Click to collapse
I have integrated "fastboot flashing unlock_critical" for pixel 2 xl only, i have not tested it but it should work
mauronofrio said:
I have integrated "fastboot flashing unlock_critical" for pixel 2 xl only, i have not tested it but it should work
Click to expand...
Click to collapse
ok cool thanks for the quick reply
razgriz1234 said:
ok cool thanks for the quick reply
Click to expand...
Click to collapse
I saw now that i forgot to unlock the flash factory image option for all 4 Pixel, i have released an update to solve that, tell me if it works
This saved my ass last night got bootloop from hell nothing would flash at all run this and boom back in business so like to say thanks for the tool :good:
jaythenut said:
This saved my ass last night got bootloop from hell nothing would flash at all run this and boom back in business so like to say thanks for the tool :good:
Click to expand...
Click to collapse
I'm happy this tool helped you:good:
Do you flash a factory image with this tool?
mauronofrio said:
I'm happy this tool helped you:good:
Do you flash a factory image with this tool?
Click to expand...
Click to collapse
Yes mate
jaythenut said:
Yes mate
Click to expand...
Click to collapse
People like to see feedback and in this thread this is the first
Does this tool work well for Pixel XL2? If I wipe phone to unencrypt, will flashing stock re-encrypt it?
almahix said:
Does this tool work well for Pixel XL2? If I wipe phone to unencrypt, will flashing stock re-encrypt it?
Click to expand...
Click to collapse
I think way early on it was established we can't have it unencrypted once the OS install it's completed, unless something changed or I got it wrong. Lol
almahix said:
Does this tool work well for Pixel XL2? If I wipe phone to unencrypt, will flashing stock re-encrypt it?
Click to expand...
Click to collapse
You can uncrypt your phone but if you.flash a stock rom, the kernel at first boot will automatically encrypt your memory again. There are 2 different encryption, one by code and one with standard image key. At this moment the twrp will automatically uncrypt the system key but you need to manually write the code (if is setted). The tool will uncrypt both method, the flash of stock rom will re-uncrypt with system key but not with code key
mauronofrio said:
You can uncrypt your phone but if you.flash a stock rom, the kernel at first boot will automatically encrypt your memory again. There are 2 different encryption, one by code and one with standard image key. At this moment the twrp will automatically uncrypt the system key but you need to manually write the code (if is setted). The tool will uncrypt both method, the flash of stock rom will re-uncrypt with system key but not with code key
Click to expand...
Click to collapse
Grazie.
Just got my Pixel 2XL the other day and am excited to root and start modding. I have been monitoring this thread just to see what issues people are running into but it looks like not many people are even doing this surprisingly. I mean that's why I bought this Google phone, so I don't have to deal with locked bootloaders that these carriers put in them to discourage rooting. I know this phone is also locked but it's not for the purpose of keeping people from rooting them. I just think that it's so odd that this thread has very little activity.
dricacho said:
I just think that it's so odd that this thread has very little activity.
Click to expand...
Click to collapse
I think it too, but i don't know why.
dricacho said:
Just got my Pixel 2XL the other day and am excited to root and start modding. I have been monitoring this thread just to see what issues people are running into but it looks like not many people are even doing this surprisingly. I mean that's why I bought this Google phone, so I don't have to deal with locked bootloaders that these carriers put in them to discourage rooting. I know this phone is also locked but it's not for the purpose of keeping people from rooting them. I just think that it's so odd that this thread has very little activity.
Click to expand...
Click to collapse
mauronofrio said:
I think it too, but i don't know why.
Click to expand...
Click to collapse
The device is very expensive, has dual partitions, has gotten a lot of bad press, and not near as Dev friendly as some others. Having said that, there are about 5 custom roms, root, exposed, substratum, and various launcher and active edge mods. So it's not like we're hurting too bad ??
Moderator Information
Always be caution when you flash files. Be sure to understand how to backup and rescure yoru device in case of flash failure or something happened. It is the general rule for every flash lover.
Click to expand...
Click to collapse
Color OS 12 CBT 1
Android 12
Only for OnePlus 8 PRO
Spoiler: MSM tools for all 1+ version, please use only for your version IN...
Unbrick/Msm tools for Oneplus Smartphones – Complete Collection
Unbrick/Msm tools can restore any Oneplus smartphone to factory image/Stock OS. In the post, we will be adding all the Unbrick/Msm tools for all the Oneplus smartphones and the list will keep updating whenever Oneplus launches a new Smartphone. Join Techibee Telegram Channel Join Now WhatsApp...
techibee.in
Spoiler: Fingerprint Fix
Just installing ColorOSMagisk-v1.2 module and reboot device.
微博
随时随地发现新鲜事！微博带你欣赏世界上每一个精彩瞬间，了解每一个幕后故事。分享你想表达的，让全世界都能听到你的心声！
m.weibo.cn
Spoiler: Color OS 12
1. Backuped your persist before flashing!
OnePlus 8P how to quickly falsh into ColorOS 12
First you download the MSM Tool of Hydrogen OS
Link: https://yun.daxiaamu.c…8C%85%E6%B0%A211.0.4.4
After the flashing is complete, download Hydrogen OS 11.0.13.13
Select local upgrade, select the downloaded package, and perform OTA upgrade
Link: https://yun.daxiaamu.c…ro/%E6%B0%A211.0.13.13
Then download ColorOS 12 CBT 1
Select local upgrade, select the downloaded package, and perform OTA upgrade
OnePlus 8Pro ColorOS 12 CBT 1
link： https://otaafsc-cost.h…555_e253ead2c7ae5e.zip
Restart the phone after installing 100%
Spoiler: Root
- Unlock Bootloader
- Download and extract ColorOS-12_ROOT_8Pro.zip
- Reboot to bootloader
- Run coloroot.bat
- Done
Spoiler: Sim FIX
If You just booted into ColorOS 12 on 8 Pro and have no signal or other sim issues..
Extract the zip and run simfix.bat from fastboot
SimFix_OnePlus8Pro_ColorOS12
https://mega.nz/file/I…Lzi3cliDjvf0U1BxvlE_og
Spoiler: Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloading right now. Any screenshots?
xtcislove said:
Downloading right now. Any screenshots?
Click to expand...
Click to collapse
Added a screenshot to the first topic.
I have not installed it yet, describe pls your experience later.
zloynavseh said:
Added a screenshot to the first topic.
I have not installed it yet, describe pls your experience later.
Click to expand...
Click to collapse
First things first: Thanks for your work.
Everything is working fine but its too much beta to test it as a daily driver.
What i have to say is, i like the new ui overall BUT the OOS11 UI is so much cleaner an i prefer it over any other ui.
-On first boot the numbers to enter my sim code where to big and i couldnt reach the enter key, a reboot fixed it.
No playstore preinstalled.
-Root is working fine
-USB debugging, pc connection has some problems
-Overall it feels good
-It looks and feels clean but i prefer oos look and feel
-Fingerprint animation is awesome
Going back to OOS11 in 10 minutes, you might have some questions first?
More screenshots
xtcislove said:
More screenshots
Click to expand...
Click to collapse
Thx, can you delete part of screenshots with you phone number, ore just smear over it.
Did you check safetynet and GPAY? Is fingerprint works fine?
Oh nice!!! @zloynavseh
I just saw the sim fix. (Last time I test got no-sim error too.)
zloynavseh said:
Thx, can you delete part of screenshots with you phone number, ore just smear over it.
Did you check safetynet and GPAY? Is fingerprint works fine?
Click to expand...
Click to collapse
Yeah thanks didnt saw the number there.
Didnt checked safetynet but gpay was working fine. Fingerprint was working as good as in oos11.
xtcislove said:
First things first: Thanks for your work.
Everything is working fine but its too much beta to test it as a daily driver.
What i have to say is, i like the new ui overall BUT the OOS11 UI is so much cleaner an i prefer it over any other ui.
-On first boot the numbers to enter my sim code where to big and i couldnt reach the enter key, a reboot fixed it.
No playstore preinstalled.
-Root is working fine
-USB debugging, pc connection has some problems
-Overall it feels good
-It looks and feels clean but i prefer oos look and feel
-Fingerprint animation is awesome
Going back to OOS11 in 10 minutes, you might have some questions first?
Click to expand...
Click to collapse
i wasn't able to get root working, could you give a quick instruction?
conquistadore.11 said:
i wasn't able to get root working, could you give a quick instruction?
Click to expand...
Click to collapse
-Unlock Bootloader
-Download and extract ColorOS-12_ROOT_8Pro.zip from first post.
-Reboot to bootloader
-Run coloroot.bat
Done.
What are the chances of this build getting an OTA update since it is a closed beta one?
gsser said:
What are the chances of this build getting an OTA update since it is a closed beta one?
Click to expand...
Click to collapse
Chance more than colorOS 11. Open beta will staring Q1'22.
I'm currently on OOS 11.0.9.9 and directly flashed the CBT through local upgrade. Everything is working fine except fingerprint. All my apps are retained no issues like data loss, no chinese bloatware.
manojkumarn said:
I'm currently on OOS 11.0.9.9 and directly flashed the CBT through local upgrade. Everything is working fine except fingerprint. All my apps are retained no issues like data loss, no chinese bloatware.
Click to expand...
Click to collapse
Did you backuped your persist before flashing? If you didn't do it, I have bad news for you, you will have great difficulty in restoring it! Try to load backup.
zloynavseh said:
Did you backuped your persist before flashing? If you didn't do it, I have bad news for you, you will have great difficulty in restoring it! Try to load backup.
Click to expand...
Click to collapse
Same problem here. I have the persist.img backed up from OOS but replacing data and engineermode folders didn't seem to help
The region are Chinese,, ( on settings, or Europe ?).
conquistadore.11 said:
Same problem here. I have the persist.img backed up from OOS but replacing data and engineermode folders didn't seem to help
Click to expand...
Click to collapse
Did you unblock your Bootloader? Sometimes it's happening when you unblock it.
zloynavseh said:
Did you unblock your Bootloader? Sometimes it's happening when you unblock it.
Click to expand...
Click to collapse
yeah it's unlocked atm. should i re-lock and try again?
xtcislove said:
More screenshots
Click to expand...
Click to collapse
大侠阿木云盘 | 一加手机官方ROM下载
OLAINDEX,Another OneDrive Directory Index
yun.daxiaamu.com
conquistadore.11 said:
yeah it's unlocked atm. should i re-lock and try again?
Click to expand...
Click to collapse
1. Change to Hydrogen OS via MSM, check fingerprint, if it broken resolve via backup persist. Then update Hydrogen.
2. Flashing via MSM Color OS 12 again
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
What is this?PixelExperience is an AOSP based ROM, with Google apps included and all Pixel goodies (launcher, wallpapers, icons, fonts, boot animation)Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the deviceBased on Android 12What works?Pretty much everything.Known issuesYou tell meDON'T FLASH GAPPS, THEY'RE ALREADY INCLUDEDDonateHereTranslationHelp with project translationStay tunedOur blogDownload Link for OnePlus 9 ProROMRecovery (Boot.img)Device Chat
INSTRUCTIONSMake sure you are on latest OOS 11 (11.2.10.10)Reboot to bootloaderFlash the provided boot.imgReboot to recoveryFormat data in the recoveryADB sideload PixelROM.zipReboot
Android OS version: 12
Security patch level: FEB 2022
Kernel Source code: Link
Trees Sources :
8350-common
Lemonadep
Source code : https://github.com/PixelExperience
ROM Developer: YouLop09
Special thanks to:Chandu, Edward, Karthik, vjs pranav.
Finally. Hope this goes official. Nice job!
Need to have Bootloader unlocked or not.
Thank u so match
dariodamico said:
Need to have Bootloader unlocked or not.
Thank u so match
Click to expand...
Click to collapse
Yes, you need to have it unlocked
Wow this is incredible!
But i am noob in the new style of flashing custom roms, when i saw a videotutorial i will flash it
adrisanfe said:
Wow this is incredible!
But i am noob in the new style of flashing custom roms, when i saw a videotutorial i will flash it
Click to expand...
Click to collapse
You must be on A11 OOS or any custom rom A11 OR A12. Doesn't matter.
Steps what I did and how I install the rom and root.
Steps:
1. Go to bootloader and use following cmd: fastboot flash boot filename.img (provided by the developer in the 1post recovery.img)
2. Go to option in bootloader and use volume key to choose the reboot to recovery.
3. Once you are in recovery, go to factory format and click factory format data wipe. It will wipe you internal and external storage with formatting data meaning you will lose everything.
4. Go to Apply Update and use following cmd: adb sideload romname.zip and click entre, it will take 10 to 12 mins depending.
5. Once install successfully reboot to system and enjoy the rom.
Steps for root what I used instead of using payload and extracting boot.img. Easy steps root successful.
1. Once you are booted into system successfully and stepup everything as you would.
2. Go to bootloader by holding down volume down and power button. You will enter bootloader menu.
3. You CANNOT root your phone with given recovery in the first post. So, what I did I use the recovery img from DrepFest rom, it's build for A12 it should be safe to use. TWRP is compatible with A12 as of right now.
4. Go to bootloader use cmd: fastboot flash boot DrespFest recovery.img and click enter and reboot to recovery.
5. Now you will entre DrespFest recovery A12.
6. Go to Apply update and use following cmd: adb sideload rootfilename.zip (it's magisk 23). It will root your phone with Magisk 23, but you can update Magisk 24.1 manually without issues.
I have attached Magiosk 23. It can be sideload through recovery of LOS recovery or DrespFest recovery.
Enjoy rom and root.
Congrats brother! Looks good!
Any chances to non-gapps build?
Will try this later, congrats!
Is there anyway to get call recording in this ROM . Thanks
dariodamico said:
Is there anyway to get call recording in this ROM . Thanks
Click to expand...
Click to collapse
not for now
Will it work if I dirty flash from Drespfest A12 to PixelExperience?
vipinpvarghese said:
Will it work if I dirty flash from Drespfest A12 to PixelExperience?
Click to expand...
Click to collapse
Yes
Warrkill said:
Any chances to non-gapps build?
Click to expand...
Click to collapse
No, Pixel Experience always have gapps.
Any chance to non pro ,just OnePlus 9
xarcom said:
Any chance to non pro ,just OnePlus 9
Click to expand...
Click to collapse
soon
ROM looks great, UI is beautiful. Unfortunately, it drains my battery drastically it might be time for a phone upgrade.
pls help I'm having error with ads Sideload gives me "failed to find updated binary META-INf" pls help
edit: sorted it out, Safari extracting the zip file right after the download of the rom and recompiling it gives error so I used chrome to dl and it is going all good
Tried this this morning for a short time, runs really well and feels amazing however once I turned off wifi I could not get it to turn back on.
Whenever I tried it would crash the system and ask to close the ui.
Reverted back to stock before I had to take to go to work
kevrae said:
Tried this this morning for a short time, runs really well and feels amazing however once I turned off wifi I could not get it to turn back on.
Whenever I tried it would crash the system and ask to close the ui.
Reverted back to stock before I had to take to go to work
Click to expand...
Click to collapse
Just a little off-topic, there is a tutorial somewhere of how to go back to stock?
OnePlus 11 Convert to OXYGENOS (CPH2447)
**** Flash at your own risk ****
Download and unzip: ONEPLUS_11_PHB110_CONVERT_TO_GLOBAL_CHP2447
https://drive.google.com/file/d/1BxTwECQLW3Cx636vwjUjqrrLAQMhDt8q/view?usp=sharing-------------------------------------------------------------
To boot into bootloader from Android
Turn On developer mode
Turn on USB Debug
Turn on OEM-unlock
Run $ adb reboot-bootloader
Run $ fastboot flashing unlock
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Reboot back into bootloader
OPEN ROM FOLDER
RUN FLASH_ALL.EXE
Wait processing
Fomat data
Go in to OxygenOS, skip all the setup. DO NOT SET THE PIN
This is the rom from ace 2 op11r
Why this flash on the op11
Mobile_Slution said:
OnePlus 11 Convert to OXYGENOS (CPH2447)
**** Flash at your own risk ****
Download and unzip: ONEPLUS_ACE_2_CONVERT_TO_11R.zip
ONEPLUS_ACE_2_CONVERT_TO_11R.zip
drive.google.com
-------------------------------------------------------------
To boot into bootloader from Android
Turn On developer mode
Turn on USB Debug
Turn on OEM-unlock
Run $ adb reboot-bootloader
Run $ fastboot flashing unlock
View attachment 5852335
Reboot back into bootloader
OPEN ROM FOLDER
RUN FLASH_ALL.EXE
Wait processing
Fomat data
Go in to OxygenOS, skip all the setup. DO NOT SET THE PIN
View attachment 5852329
Click to expand...
Click to collapse
ChrisFeiveel84 said:
This is the rom from ace 2 op11r
Why this flash on the op11
Click to expand...
Click to collapse
The file has been updated
A huge thank you for your effort. Does OTA update work on your converted rom?
hilary trump said:
A huge thank you for your effort. Does OTA update work on your converted rom?
Click to expand...
Click to collapse
no bro. ota not support
Mobile_Slution said:
no bro. ota not support
Click to expand...
Click to collapse
Thanks!!!
Can I succeed with this fastboot rom?
Is it possible to update with local files?
ryshd296 said:
Thanks!!!
Can I succeed with this fastboot rom?
Is it possible to update with local files?
Click to expand...
Click to collapse
I flashed it, and now I'm sharing it here
What if i revert to phb110 from cph2447 and install stock color os, am i able to get ota updates then ? Im talking about color os updates
BratoMo225 said:
What if i revert to phb110 from cph2447 and install stock color os, am i able to get ota updates then ? Im talking about color os updates
Click to expand...
Click to collapse
yes
Mobile_Slution said:
yes
Click to expand...
Click to collapse
How am i gonna do that
Mobile_Slution said:
OnePlus 11 Convert to OXYGENOS (CPH2447)
**** Flash at your own risk ****
Download and unzip: ONEPLUS_11_PHB110_CONVERT_TO_GLOBAL_CHP2447
https://drive.google.com/file/d/1BxTwECQLW3Cx636vwjUjqrrLAQMhDt8q/view?usp=sharing-------------------------------------------------------------
To boot into bootloader from Android
Turn On developer mode
Turn on USB Debug
Turn on OEM-unlock
Run $ adb reboot-bootloader
Run $ fastboot flashing unlock
View attachment 5852335
Reboot back into bootloader
OPEN ROM FOLDER
RUN FLASH_ALL.EXE
Wait processing
Fomat data
Go in to OxygenOS, skip all the setup. DO NOT SET THE PIN
View attachment 5852329
Click to expand...
Click to collapse
On what version is it based of ? Does it have the automatic brightness calibration going crazy bug ? Does the different color modes work ?
Lunisi said:
On what version is it based of ? Does it have the automatic brightness calibration going crazy bug ? Does the different color modes work ?
Click to expand...
Click to collapse
CPH2447 is description
I want to back to color os , but I'm getting bootloop
Hi, i followed your instruction and ended up in a bootloop. A lot of the flash failed with the message:
FAILED (remote: 'Flashing is not allowed for Critical Partitions.
')
fastboot: error: Command failed
Allesa said:
Hi, i followed your instruction and ended up in a bootloop. A lot of the flash failed with the message:
FAILED (remote: 'Flashing is not allowed for Critical Partitions.
')
fastboot: error: Command failed
Click to expand...
Click to collapse
you have critical partitions flashing not unlocked
fastboot unlock critical
Has anyone installed cph2447_11_A.08 ? Whats new ? Are there bugs with display scale, auto brightness? display color changes?
BratoMo225 said:
Has anyone installed cph2447_11_A.08 ? Whats new ? Are there bugs with display scale, auto brightness? display color changes?
Click to expand...
Click to collapse
NO, I flashed it from cos to oos, if I install it, the phone will brick
gabriel.amg said:
I want to back to color os , but I'm getting bootloop
Click to expand...
Click to collapse
bootloop is mainly due to the oplusstanvbk.img
you miss flashing it?
BratoMo225 said:
Has anyone installed cph2447_11_A.08 ? Whats new ? Are there bugs with display scale, auto brightness? display color changes?
Click to expand...
Click to collapse
i just did it and it's the same result as with a.08, still have all the issues you mentioned.
flashing oplusstanvbk.img from cos is still needed to fix boot loop afterward.
oprocks said:
i just did it and it's the same result as with a.08, still have all the issues you mentioned.
flashing oplusstanvbk.img from cos is still needed to fix boot loop afterward.
Click to expand...
Click to collapse
Did you do factory reset after? You should try that and see