Hey everyone,
The type C port of my phone stopped working sometime ago. It only charges. However no dash charge is available. Also when I connect my phone to my computer there is absolutely 0 data exchange happening it only charges. Also OTG is not working aswell. When I connect a OTG device and turn on OTG, it only gives power to the OTG device however, no data connection is happening.
Before you may ask,
- I tried multiple cables and different different usb ports and devices.
- I bought a brand new official dash charge cable.
- Turned ON/OFF Usb debugging
- Put "Default Usb Configuration" to "File Transfer" (as well as trying other options such as USB tethering etc)
- Booted into recovery and wiped my cache.
- Cleared the cache of MTP, Media library services. (as well as disabling and re-enabling them)
- Went into factory menu and ran factory tests.
- Went into fast boot menu and recovery and tried plugging the cable for some data exchange.
- Then I determined that the port is damaged from endless usage for years, bought a brand new type c port (with flex cable etc) replacement and installed it.
and still... There is absolutely no data connection happening from the type c port. Just slow charging and nothing else.
More info:
The usb started working out of nowhere for a brief time on it's on and then shut off again. Which led me to believe this is rather a software issue than a hardware one.
The Microphone Jack is also not working (as they are on the same board with the usb port).
I am assuming the service or software responsible of activating the data connection when something plugged is just nothing working.
Has anybody experienced something like that? Is there anything that I can try to fix this issue?
The only thing I have not tried is factory reseting the phone and I am not sure if that would fix this issue and I want to do it as a last resort.
I just don't want to give up on my 5T as it's still rock solid except for this issue.
Damn bro. I am facing the exact same issue. Looks like this is end of life for OP5T phones? I had bought mine in 2017/18 can't remember now! Let me know if you are able to fix it anyway
I had the same symptoms and it was caused by a poorly designed ribbon cable inside the phone. The cable always has a little stress on it and over time it will break the connector on the motherboard.
Related
Hi guys,
My GNex has a problem. Many users seem to have a similar problem but theirs seem to be hardware related and I'm pretty confident mine is software related.
It started a few months ago when my GNex wouldn't charge through the wall charger. I was on a trip with my friends so I didn't have access to a pc and wasn't able to troubleshoot further. The charging icon would appear when the phone was off but when I turned it on it didn't charge. I played around with the phone for about two hours, rebooting, Googling for solutions, changing the USB connection modes in the Storage settings. When I changed from Next Launcher to Stock launcher and rebooted everything was working fine again. However I think it was only a coincidence. Then the problem didn't occur again until now and this is why I think it's software related. If hardware would have been broken the problem wouldn't just have fixed itself like that.
It happened 3 days ago but somehow fixed itself again. I was troubleshooting the issue with my GNex connected to PC and installed Nexus Root Toolkit by Wugfresh. During install my phone rebooted on it's own and suddenly USB worked perfectly again!
However yesterday I forgot to charge and my GNex died. On reboot the issue was back.
"Symptoms":
Phone won't charge with any wall charger (and any cable) unless off
Phone will charge through USB in any mode but PC will not recognize it and install it as unknown device.
USB Debug Icon and Connection Mode notification do not appear in status bar upon PC connection
OTG doesn't work and apps like "Stickmount" do not detect external drives
Attempts:
Gently bending the "tongue" inside the micro usb on the phone in case there is a bad connection
Reinstalling drivers on PC
Rebooting device in different modes including fastboot
Using different batteries
NOTES
This problem started after latest 4.3 update. It has only occured after battery completely runs dry. I have 3 batteries (a bit excessive I know) and an external battery charger so charge is not the issue, I just really want to understand what's going on with my phone.
I'm not ready to Factory Reset or replace the USB port yet, those are last resort options to me. Any other options, especially software related, are very welcome. I am on stock 4.3 only rooted and with CWM recovery.
In Testing menu (type *#*#4636#*#* in Dialer) under Battery Settings my phone also says Charging (AC) when connected through USB. Hope this helps.
Been Googling around for two days now so I decided to make my own thread. Any help is appreciated. Sorry for this very long post.
Fixed it! Tried bending the tongue inside the micro usb again, forced much more this time, everything is working again, for the moment
So my phone is no longer being recognized as a USB device by my computer. Whenever I plug my phone in, I don't see the USB storage option on the top of my phone, nor will my computer even acknowledge that it's been plugged in. This issue has never happened to me before, and it only started acting up just last night. It isn't an issue with the computer OR the cable; I've tried with many different PCs and cables, both third party and official, and I'm getting the same problem. I don't think it's an issue with a broken microusb port, either, since it still charges. Interestingly enough,the computer WILL notice that something has been inserted when I plug it in... if the phone is off. However, the phone only shows up as an unknown device. Also, when I check the battery status, it almost always says that I'm charging via AC even though I'm using USB.
After exploring the forum, I've discovered and tried using *#7284#, but the code refuses to work. (I also tried other codes just to see HOW they work, and none of them will register on my phone.)
I'm currently running CM 7.1, and my phone is rooted. I haven't changed the ROM ever since I started using it, which was about a good year or so ago, and I seldom do any sort of flashing, so I highly doubt it's related to that.
Any suggestions? I thought it might be a dirty microusb port, since I've also been getting the random Car Mode popups as of late, but after cleaning it out, nothing seems to have changed.
Hello dear.
I have a problem with my p601,
I cant connected my tablet to PC.
When i connected, just charging and no any connection.. In odin or storage not show a device, adb not connected...
And when i used a charger show an red stroke on battery icon. And charging is very slowly, during night only 50%.
I'm root my device, install twrp, and install cyanogenmod, but nothing change.
Now whats your idea? How i can fix this issue?
This may be an obvious question but have you tried a different cable or charger? I always found running on stock ROM that charging was an issue unless I powered it down. I have used a 12W Crapple charger and that seems to work ok but charging has never been an endearing part of the this tab.
So in Odin you it doesn't work? Could you have some dirt or contaminants in the USB port, start with the obvious, change the cable, use a different usb on the pc or try another pc altogether.
I had same problem, i noticed that the usb port was loosen little bit, i had to open the tablet apply small pressure with plier to afjust the usb port,,,, and now it's perfect.
Just wondering if Android Auto for connected car displays stopped working for anyone as of yesterday or today. I'm skeptical of another Google "back end experiment" that caused it to stop working. I have a Ford with Sync 3
Symptom: Plug phone into car, nothing happens. Phone only charges and will even say USB is connected.
I've done some basic and partially in depth trouble shooting. It most likely couldn't be caused by any updates on Car infotainment system or my Phone because it has been working (unless there was a back end play services update that was pushed out).
From the obvious to less obvious:
-Tried rebooting phone and restarted car
-Tried using a different USB A to C cable (Anker ones have worked perfectly for me)
-Tried using secondary USB port in car
-Tested phones ability to connect to a PC and transfer data, no issue
-Threw music onto a USB flash drive and plugged it into car, no issue
-Tried turning on USB debugging on phone, no change (not sure if this would have even helped in first place).
I'm at a loss right now. It does not make any sense.
I do not have another android phone to try or an iPhone to test CarPlay unfortunately.
Literally had the same thing happen to me on Sync 3 last week. I just deleted the car from the Android Auto app and deleted the phone from Sync 3. After that I was able to use Android Auto again after going through the setup prompts. No issues since.
Works fine for me on my 2018 silverado
no issues on 2017 Sierra
Here it works perfectly
bigblueshock said:
Just wondering if Android Auto for connected car displays stopped working for anyone as of yesterday or today. I'm skeptical of another Google "back end experiment" that caused it to stop working. I have a Ford with Sync 3
Symptom: Plug phone into car, nothing happens. Phone only charges and will even say USB is connected.
I've done some basic and partially in depth trouble shooting. It most likely couldn't be caused by any updates on Car infotainment system or my Phone because it has been working (unless there was a back end play services update that was pushed out).
From the obvious to less obvious:
-Tried rebooting phone and restarted car
-Tried using a different USB A to C cable (Anker ones have worked perfectly for me)
-Tried using secondary USB port in car
-Tested phones ability to connect to a PC and transfer data, no issue
-Threw music onto a USB flash drive and plugged it into car, no issue
-Tried turning on USB debugging on phone, no change (not sure if this would have even helped in first place).
I'm at a loss right now. It does not make any sense.
I do not have another android phone to try or an iPhone to test CarPlay unfortunately.
Click to expand...
Click to collapse
happens to me every 3-6 months.
Swapping out the cable resolved it every time.
ya dude you need to try some different cables. that should always be your first step if there have been no updates.
Thanks for the replies. I deleted and unpaired AA from my phone and my car with no luck.
I actually had my coworker who has a Pixel 2 XL plug his phone in to my car. He had no issues at all even after multiple tries. Mine still wont connect. We're both on Pie with same security patch level. Did try tried Multiple new cables and still no luck (the anker high quality ones).
I found this thread incase it starts happening to anyone...
https://productforums.google.com/fo.../PWBrDUXzR4o;context-place=forum/android-auto
Something I picked off of that topic was some USB patches/features that went in to effect between Pie release and last month security patch.
I may just wait a month. Maybe another security patch which tweaks USB or 9.1 will drop fixing my issue. We shall see. At least I know its not my car or my cables.
Go into apps and check your "play services" versions between the two phones. Google controls a lot of **** through that app
Or just try to clear your usb port
Thanks for the replies. After the October patch I'm back up and running.
Lack of communication between departments at Google baffles my mind.
Hey guys, wondering if you've run into a similar problem. I'm on stock 7.0 (with magisk & xposed) 4.49.605.16 Firmware.
My phone will no longer charge or recognize a USB connection when plugged in. No LED indicator. However, I am able to charge the phone if I plug it in and then restart (still no USB connection though... the phone doesn't seem to know it's plugged in, only that it is charging). When I disconnect after the restart the phone then loses the able to charge until I reconnect and reboot. Any ideas?
I've played around with USB debugging settings in Dev Options (some posts suggested toggling setting to 'fix' the issue). No dice.
Rebooted multiple times (with and without xposed enabled).
I'm not convinced that it's a hardware issue seeing as it constantly charges after reboot. I'm not sure if re-flashing anything again would help (and I can't connect to adb!). I've seen some posts on the internet attribute the problem to a flex cable but I don't see how that could cause problem as the phone still retains partial functionality.
Any ideas? Thanks in advance!
In case anyone is curious or has run into a similar situation, this was most definitely a hardware problem. If your phone charges while off (or when it's turned on while plugged in) but not afterwards, the sister board with the USB and headphone jack has failed (ignore all of the explanations and attempted workarounds seen online). Fortunately, it's an easy fix (especially if you've dug around the inside of the m9 before). The component is about $8.00-$9.00 USD and in theory you don't have to remove the motherboard or battery to replace the bit. I swapped the board and charging and USB connectivity work like before.