I'm thinking of using my phone as a wifi repeater to use my pc. The wifi I get from the modem is 5ghz. When I make a hotspot from the phone, the wifi adapter connected to my pc does not see 5 ghz networks. Can I share this internet as 2.4 ghz from the phone?
I just realized that you can't change to 5Ghz unless you share it from your own mobile data. But i been trying something but doesn't really sure that it's working or not, the first things is you have to set your wifi from mobile data as 5Ghz then you can connect your n8p from your 5ghz router, here as my attachement in poco F4 says that my note 8 pro broadcasting 5ghz
gunturXDA said:
I just realized that you can't change to 5Ghz unless you share it from your own mobile data. But i been trying something but doesn't really sure that it's working or not, the first things is you have to set your wifi from mobile data as 5Ghz then you can connect your n8p from your 5ghz router, here as my attachement in poco F4 says that my note 8 pro broadcasting 5ghz
Click to expand...
Click to collapse
i want to share wifi as 2.4 ghz from phone, but i cant
Related
Hello,
I cannot connect to my AP on 5 Ghz
It sees it, it asks for password, but then disconnect and reconnect endlessly
Any idea why
Cheers.
One X does not support 5GHz wifi. I see only 2.4GHz in official spec
Oups, I thought it could as i can see it
Switch your router to 2.4, and it will work
I thought it was 2.4ghz only cos of the specification too but i can connect to my 5ghz frequency on my Netgear WNDR3700.
I can see and connect to my Netgear 5Ghz WNDR4500 no problem at all.
You guys can tell me what parameters do you use for your 5ghz ?
Thanks.
My router is fairly new, just bought it 2 months ago. I didnt change any of the settings, just plug & play. Even didnt change the router password.
The problem is with Linksys router's wireless .
even in my house we used to have a Linksys router , kept on disconnected when over 3 devices are connected to it , keeps on disconnected every 2-3 minutes really.
changed the router , and everything is smooth now
ChefChaudart said:
You guys can tell me what parameters do you use for your 5ghz ?
Thanks.
Click to expand...
Click to collapse
WIFI Channel 44
WPA2 AES encryption
Up to 300 Mbps speed setting
5Ghz a/n network types.
That's all the settings that i've configured, although it works out of the box with stock netgear settings too.......
borce_razor said:
One X does not support 5GHz wifi. I see only 2.4GHz in official spec
Click to expand...
Click to collapse
I have seen some places (specs) where is doesn't show the 5GHz, but the phone supports it.
Not able to connect with 5Ghz WiFi AP
harolds said:
I have seen some places (specs) where is doesn't show the 5GHz, but the phone supports it.
Click to expand...
Click to collapse
I have tried to double check this spec on the HTC offical website and it does indicate this phone supports WiFi 5Ghz, as it is with Wi-Fi 802.11 a/b/g/n
htc.com/us/products/htconex-att#tech-specs
however, i have tried to link with a DLink router, DIR-857, and it sees the 2.4Ghz SSID and could connect without any problem, however, not able to see 5Ghz SSID though, i have also tried to set no security and with different channels but seems not have any lucky to this.
i am wondering is there any particular setting to the phone or router double checked with customer service but seem not really help, only ask me to change and try with another AP or router.....
I'm connected to my 802.11a AP with no problems at all. Ditto for 802.11g. I don't have 802.11n here so no idea if that affects it or not.
I didn't need to do anything special on the phone. The AP is a Cisco AP1242AG and it has the usual configuration with WPA2-PSK.
Tiersten said:
I'm connected to my 802.11a AP with no problems at all. Ditto for 802.11g. I don't have 802.11n here so no idea if that affects it or not.
I didn't need to do anything special on the phone. The AP is a Cisco AP1242AG and it has the usual configuration with WPA2-PSK.
Click to expand...
Click to collapse
same as that, i didnt have to configure the phone at all. i just scanned, found the network and connected using WPS push button. Im on 802.11n as well
Hi all
My N7100 doesn't want to work with 5GHz WiFi at all. There is no option like that.
Event WiFi analyzer cannot switch to 5GHz and works only with 2.4GHz.
This happens regardless of any ROM or kernel I tried. AOSP, stock, CM10, CM10.1, combined...
I thing it's a kind of limitation in software. But I tried many ROMs and kernels. Do we have any radios/modems to flash separately?
Thanks
Wi Fi 5GHz on AP
I think there should be a 5GHz WiFi output from your AP also to connect with your 5GHz WiFi, correct me if am wrong.
I'm not talking about connecting to 5GHz.
The scan doesn't work...
WiFi analyzer allows to scan 2.4 or 5 GHz ranges. You can swap between two, but with my Note 2 I cannot change band, it always locked at 2.4GHz.
I'd be happy if anyone verified with WiFi analyzer is he can scan 5GHz band.
i have cisco e4200 set with different ssid for 2.4 ghz and 5 ghz. my ipad mini can detect and connect to 5 ghz one but my laptop (asus a55vm) and gnote2 cannot even detect it. updated the router's fw but no dime. so, i was wondering if the my laptop and note2 really support 802.11n at all?!?
no solution or no one even bother to connect to 5 ghz?
No 5GHz
I have the same problem I cannot see the 5GHz Network from my note 2 but I have no problem from my laptop and other clients.
Searching the web I found that the Mac Book Pro has the same problem with some 5 ghz Networks and they require the router to be on a specific channel:
channel 48.
Could this be the same problem with the Samsung Note 2?
Could it be that the radio only accept certain channels on the 5 gigahertz Network ?
I'm not at home but next week, when I go back, I will try to set the router to a more central channel like the 48.
Samsung Note 2 GT-N 7105
sms2000 said:
I'm not talking about connecting to 5GHz.
The scan doesn't work...
WiFi analyzer allows to scan 2.4 or 5 GHz ranges. You can swap between two, but with my Note 2 I cannot change band, it always locked at 2.4GHz.
I'd be happy if anyone verified with WiFi analyzer is he can scan 5GHz band.
Click to expand...
Click to collapse
I can see both on mine with wifi analyzer but there is no option to specify bands. apparently Samsung took that out.
y2whisper said:
I can see both on mine with wifi analyzer but there is no option to specify bands. apparently Samsung took that out.
Click to expand...
Click to collapse
In my case I can chose which bands to scan with WiFi Analyzer but then it only shows 2.4GHz networks.
Please, please, please...
Anyone? any help??
Tommaso
You may just be missing the button (which helpfully disappears when you're not messing with the UI). Upper left corner, there's the little Wifi Analyzer icon, just to the left of the text "Wifi Analyzer".
Poke the little area of blackness in between the Wifi Analyzer logo and the -30 dbm label on the chart.
That (normally-invisible) button toggles it between 2.4 and 5 GHz.
I can scan and use 5 GHz fine on my note 2 (my AP at home does 2.4 and 5 GHz at once, and the note 2 can connect to either one). The AP is on channel 149; haven't tried others.
@ tpeef
Thanks for jumping in. I appreciate your help!
I can see that button and I can toggle it. However I see all the 2.4GHz networks but none of the 5GHz.
In a Starbucks cafe I saw and connected to a network with "5" next to it but I didn't have time to check (with my laptop) if actually was 5GHz or just called "xxxxxxx 5".
Could it be that my 5GHz network channel is outside my device's radio's hardware/OS specs? If so, how can I modify the device's specs?
Tommaso
Try the lowest 5 GHz channel.
PhilipTD said:
Try the lowest 5 GHz channel.
Click to expand...
Click to collapse
I had to change the 5GHz channel to the lowest available (36) before my phone would see the SSID.
To get Wifi Analyzer to scan the 5GHz channels tap the upper left hand corner below the icon and above the -30 dBm.
---------- Post added at 08:35 PM ---------- Previous post was at 08:30 PM ----------
PhilipTD said:
Try the lowest 5 GHz channel.
Click to expand...
Click to collapse
I had to change the 5GHz channel to the lowest available (36) before my phone would see the SSID.
To get Wifi Analyzer to scan the 5GHz channels tap the upper left hand corner below the icon and above the -30 dBm.
According to WiFi-Analyzer, the Note II can only see 5GHz channels 36-44.
Thanks Rusty Wedges !!!
Ran across your statement, scanned with WiFi Analyzer and seen my 5g channel was up in the 140's I think, and then went into my Asus router, changed it from auto channel to 30 (or whatever the lowest value is) then rebooted my router, and then my phone. Told my phone to forget the network, then re-entered my 5g network credentials and VOILA !
I knew it had to be something like this because when I initially set up my router I was connecting to 5g no problem. Then it just stopped. At least I also discovered I am the only person around with 5g too. Loving seeing link speeds at 150Mbps, thanks again !
How's it going guys? I have my Linksys router setup to 2,4 and 5ghz AC. For some reason my HTC 10 can not see the 5ghz signal along with other signals around my room. And my 2.4ghz speed is mad slow. Only getting 15mbps download when only 5' away from the router. I get 100mbps on 5ghz Ac on my PC.
Every other device I own sees and connects to the 5ghz Ac signal except my HTC 10.
Hi, I just tried to connect to my Netgear Dual Band router on the 5 GHz Band and it worked fine..possibly refresh the signals and then turn both the router and the phone on and off? But I assume you may have tried that already?
Sent from my HTC 10 using Tapatalk
---------- Post added at 09:09 AM
Have you tried WiFi Analyzer? I can see and connect to my Asus 5Ghz router with no issues...
Did you flash anything on the phone?
Definitely use WiFi Analyzer to configure your router/APs.
EDIT: Check this thread: http://forum.xda-developers.com/showpost.php?p=69295617&postcount=223
I think it's a radio issue. I have to update it, so I think I'm just gonna end up doing an ruu
When you go into advanced wifi settings, what does it say under "wifi frequency band?" You may have it set to 2.4 gHz only. Check that before re-flashing anything.
It's set to auto. If I set it to 5GHZ only like 2 networks show. My PC sees like 10
I use htc 10 it does not see the network at a frequency of 5 GHz on channel 149
Hi ,
Has anyone tried to create a wifi hotspt via 5 ghz band on your Galaxy A50. When I try to create one, I only get 2.4 GHZ option. My two year old infinix zero 5 pro gives me an option to choose between 2.4 ghz and 5 ghz bands while creating a wifi hotspot. Sadly I dont see such options in my Galaxy A50. Is there any workaround for this? As per GSMarena.com A50 does support dual wifi bands.
Thank You.
I got 5ghz band wifi connection...my phone still can connect 5ghz wifi...i am using 505f
Thank yoh for your response!!!
But were you able to create a wifi-hotspot on a 5ghz band on your galaxy a50? If yes, how?
i have this problem with my gopro5...too bad don't connect
It normally works.
The Galaxy A50 can create a Hotspot at a frequency of 5GHz, but you need to enable the advanced setting of 5GHz. It normally works.
A505FN
Hi, Can RN8pro connect on two Wifi bands at the same time? It should support dual band, but in some review is was not working.
And what maximum speeds do you have on wifi connection?
Generaljan said:
Hi, Can RN8pro connect on two Wifi bands at the same time? It should support dual band, but in some review is was not working.
And what maximum speeds do you have on wifi connection?
Click to expand...
Click to collapse
Not at the same time, I've had many phones with 2.4 and 5ghz and none have supported both conections at the same time, my speed for the 2.4ghz my RN8Pro gets a link of 86mbps, and for the 5ghz network the link is 433mbps, but I don't know if the 433mbps is the max speed that the phone allows or if the router is the one that is limiting my connection.
EDIT: However if you configure your 2.4ghz&5ghz networks with the same SSID and password in the router, when you connect to the wifi, your phone based in the signal will switch between 2.4 and 5ghz automatically.
DanyMarroquin said:
Not at the same time, I've had many phones with 2.4 and 5ghz and none have supported both conections at the same time, my speed for the 2.4ghz my RN8Pro gets a link of 86mbps, and for the 5ghz network the link is 433mbps, but I don't know if the 433mbps is the max speed that the phone allows or if the router is the one that is limiting my connection.
EDIT: However if you configure your 2.4ghz&5ghz networks with the same SSID and password in the router, when you connect to the wifi, your phone based in the signal will switch between 2.4 and 5ghz automatically.
Click to expand...
Click to collapse
Well Realme phones can connest on more bands of same wifi. RN8pro should be also able, but on TechTablets sad that i was not possible for some reason. I am asking if anything change with new ROM?
RN8pro shoul have also X antenas for wifi and some other tools.
In reviews, it was stated that the note 8 pro was able to connect 2 wifi connections at once. Is that true and how do you do you that?
haloass65 said:
In reviews, it was stated that the note 8 pro was able to connect 2 wifi connections at once. Is that true and how do you do you that?
Click to expand...
Click to collapse
Here is the review https://www.youtube.com/watch?v=FIMkTL9gnrU
Redmi Note 8 Pro should have Dual simultaneous wireless network, but it is disabled in software!
Realme X2 has doble speeds in Wifi. Can dovelopers unlock it on RN8pro?