Develop Bugs

7X Oreo Update Files

Instead of waiting for the phone to get the staged update can we just flash the update.zip and other related update zips with TWRP?

I used the L24 update files from TeamMT as well as the guide found in the link below to update to the recently released stable build of Oreo
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649

mattyb132 said:
I used the L24 update files from TeamMT as well as the guide found in the link below to update to the recently released stable build of Oreo
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
Click to expand...
Click to collapse
And how did it go.
All good?
How is the update?

Can I flash this on bnd-al10? Thx

mattyb132 said:
I used the L24 update files from TeamMT as well as the guide found in the link below to update to the recently released stable build of Oreo
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
Click to expand...
Click to collapse
Did the data update files install for you?
My update fails at or near 70%
And I do not have the face unlock as listed in changelog.
Along with different version number on about phone screen.

mattyb132 said:
I used the L24 update files from TeamMT as well as the guide found in the link below to update to the recently released stable build of Oreo
https://forum.xda-developers.com/honor-7x/how-to/guide-honor-7x-flash-oreo-update-t3781649
Click to expand...
Click to collapse
And did it install with Project Treble support? Repartitioning/etc as needed? Or did it just somehow load the ROM on the current layout?

mrmazak said:
Did the data update files install for you?
My update fails at or near 70%
And I do not have the face unlock as listed in changelog.
Along with different version number on about phone screen.
Click to expand...
Click to collapse
Mine went through fine and it went pretty fast too. I updated from the beta version of Oreo if that makes a difference.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

mattyb132 said:
Mine went through fine and it went pretty fast too. I updated from the beta version of Oreo if that makes a difference.
View attachment 4490616
Click to expand...
Click to collapse
From l24 beta?
That makes sense, why firmware finder says not for many. Because this one might be for beta updates

mrmazak said:
From l24 beta?
That makes sense, why firmware finder says not for many. Because this one might be for beta updates
Click to expand...
Click to collapse
Is this this the one you tried? (It's the top one)
http://pro-teammt.ru/firmware-database/?firmware_model=bnd-l24&firmware_page=0

mattyb132 said:
Is this this the one you tried? (It's the top one)
http://pro-teammt.ru/firmware-database/?firmware_model=bnd-l24&firmware_page=0
Click to expand...
Click to collapse
Yes, same one.

n9yty said:
And did it install with Project Treble support? Repartitioning/etc as needed? Or did it just somehow load the ROM on the current layout?
Click to expand...
Click to collapse
No "Repartitioning/etc" needed. If the L24 is just like the L34 (which I believe it is), it's already partitioned. Do a google search for how to view android partition table and you can verify it.

mrmazak said:
Did the data update files install for you?
My update fails at or near 70%
And I do not have the face unlock as listed in changelog.
Along with different version number on about phone screen.
Click to expand...
Click to collapse
I got it to finish the update. Not sure which one of the two changes I made that made it work, but I will summarize.
I used the twrp install method I have been working on. It uses the same manual method that has been used to flash beta oreo.
But I was shortening the file names (both in the script and the file names in the folder) . This might have been the issue. So I changed the update script(not released yet) to use original file names. And Installed a second time from inside the partial oreo update . Based on previous post about successful updating from oreo beta worked, this might be the key.
This time update finished fully.
No error during flash, Full model name in about phone, face unlock works.

[XT1970-X] Stock firmware share thread. [TOOL] fastboot flash / info

Hi. I'm sharing some firmwares and I'll try to add new ones when / if I get a hold of them before they appear on lolinet .
A good place to look first is: https://mirrors.lolinet.com/firmware/moto/kane/
Please feel free to share your own links to firmwares if you find any.
KANE - XT1970 Firmwares
---------------------------------------------------------------------------------------------------------------------
Android 10:
KANE_QSAS30.62-24-11_subsidy-DEFAULT_regulatory-XT1970-3-KSA-TH_CFC.xml.zip
KANE_QSAS30.62-24-11_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_QSAS30.62-24-11_subsidy-DEFAULT_regulatory-XT1970-1-AUSTRALIA_CFC.xml.zip
KANE_AMX_QSAS30.62-28-7_subsidy-DEFAULT_regulatory-XT1970-2-CHINA_CFC.xml.zip
KANE_RETEU_QSAS30.62-33-3_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_RETEU_QSAS30.62_33_2_subsidy_DEFAULT_regulatory_DEFAULT_CFC.xml.zip
KANE_RETEU_QSAS30.62-33-1_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_RETEU_QSA30.62-33_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_QSAS30.62-24-7_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_QSAS30.62-24-7_subsidy-DEFAULT_regulatory-XT1970-1-CARICAM_CFC.xml.zip
KANE_QSAS30.62-24-7_subsidy-DEFAULT_regulatory-XT1970-1-AUSTRALIA_CFC.xml.zip
KANE_QSAS30.62-24-7_subsidy-DEFAULT_regulatory-XT1970-2-ARGENTINA_CFC.xml.zip
KANE_QSAS30.62-24-7_subsidy-DEFAULT_regulatory-XT1970-3-KSA-TH_CFC.xml.zip
KANE_QSAS30.62-24-7_subsidy-DEFAULT_regulatory-XT1970-3-INDIA_CFC.xml.zip
KANE_QSAS30.62-24-6_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_RETEU_QSAS30.62-24-3_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_QSAS30.62-24-3_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
XT1970-3-DS-KANE_RETEU_QSA30.62-24_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
---------------------------------------------------------------------------------------------------------------------
PIE:
XT1970-3-DS_KANE_RETEU_PSA29.97-37_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_RETEU_PSA29.137-16_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
XT1970-1_KANE_PSA29.137-16_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_PSA29.137-17_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_PSA29.160-30_subsidy-DEFAULT_regulatory-XT1970-3-INDIA_CFC.xml.zip
KANE_RETEU_PSAS29.137-17-4_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_RETEU_PSA29.160-50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_PSAS29.160-50-3_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_RETEU_PSA29.160-55-7_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_PSA29.160-55-7_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
---------------------------------------------------------------------------------------------------------------------
HOW DO I UPDATE WITH FASTBOOT WITHOUT LOOSING ROOT, HAVING TO FACTORY RESET?
I've made a .bat file for flashing and some other stuff. Basic stuff that I use the most.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Unzip .bat to same dir as your fastboot.exe and double click it or drag it to your cmd window and press enter.

tys0n said:
Hi. I'm sharing some firmwares and I'll try to add new ones when / if I get a hold of them.
Please feel free to share your own links to firmwares if you find any.
KANE - XT1970 Firmwares
-------------------------------
XT1970-3-DS_KANE_RETEU_PSA29.97-37_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
KANE_RETEU_PSA29.137-16_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
XT1970-1_KANE_PSA29.137-16_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Click to expand...
Click to collapse
can you please upload indian firmware??
https://www.firmwaredown.com.br/index.php?a=downloads&b=file&id=8771
XT1970-3-DS_KANE_PSA29.137-16_subsidy-DEFAULT_regulatory-XT1970-3-INDIA_CFC.xml
Blur_Version.29.11.17.kane.retail.en.US (INDIA)

i.snehal.kiran said:
can you please upload indian firmware??
https://www.firmwaredown.com.br/index.php?a=downloads&b=file&id=8771
XT1970-3-DS_KANE_PSA29.137-16_subsidy-DEFAULT_regulatory-XT1970-3-INDIA_CFC.xml
Blur_Version.29.11.17.kane.retail.en.US (INDIA)
Click to expand...
Click to collapse
Found it on lolinet now.
https://mirrors.lolinet.com/firmware/moto/kane/official/RETIN/

XT1970-3
hello great guys, did you see firmware for PSA29.137-17?

ᕙ(⇀‸↼)ᕗ said:
hello great guys, did you see firmware for PSA29.137-17?
Click to expand...
Click to collapse
Hi. Yes I had it uploaded yesterday but forgot to post a link.
Here it is. KANE_PSA29.137-17_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
It's still June patch but I read that it should fix some gps issue.

Added: KANE_PSA29.160-30_subsidy-DEFAULT_regulatory-XT1970-3-INDIA_CFC.xml.zip

Here are all Motorola One Vision XT-1970-3 factory roms posted: https://boycracked.com/2019/07/27/official-motorola-one-vision-xt1970-3-kane-stock-rom/ per country.

August security patch, reteu added. KANE_RETEU_PSAS29.137-17-4_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip

I bought an unlocked version of one vision in argentina. Anyone know if i can flash a firmware from another country and the correct steps to do it ?

AndresOrue said:
I bought an uncarrier version of one vision in argentina. Anyone know if i can flash a firmware from another country and the correct steps to do it ?
Click to expand...
Click to collapse
To answer my own question, I installed a firmware from India (RETIN_9.0_PSA29.160-30) and everything works perfect.

Added KANE_RETEU_PSA29.160-50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip

tys0n said:
Added KANE_RETEU_PSA29.160-50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Click to expand...
Click to collapse
https://drive.google.com/file/d/1fz1nwjozjhFv_lO7PQa7L2y-KfDO-pAs/view?usp=sharing

how to flash it

whynot4444 said:
how to flash it
Click to expand...
Click to collapse
Not sure if you refeer to firmware flashing but if that's what you wanna know, I've added a .bat-file to first post for some basic fastboot functions/flashing.

hello i have version XT1970-5 what firmware i can use ??, im flash kane retail it error at vbmetaa

whynot4444 said:
hello i have version XT1970-5 what firmware i can use ??, im flash kane retail it error at vbmetaa
Click to expand...
Click to collapse
China? Look here https://mirrors.lolinet.com/firmware/moto/kane_retcn/official/RETCN/

ilia3367 said:
China? Look here https://mirrors.lolinet.com/firmware/moto/kane_retcn/official/RETCN/
Click to expand...
Click to collapse
flash ok, but only 1 version, can be convert to another firmware ??

AndresOrue said:
To answer my own question, I installed a firmware from India (RETIN_9.0_PSA29.160-30) and everything works perfect.
Click to expand...
Click to collapse
Could you describe the step-by-step procedure of the work you did to install the new firmware on your device? ... did you need to re-lock your bootloader too? .. who are in the beginning of "playing" with our smartphones we will be grateful !!!!...thank you!!!!...

can you flash firmware for XT1970-5 RETCN to XT1970-RETEU ??

Added KANE_PSAS29.160-50-3_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip

[Magisk][ROOT][All versions]Auto Root tool - for OnePlus 7T/Pro

Features:
- Install magisk manager
- Patch boot.img automatically（without boot.img）
- No boot.img needed, bootloader unlocked needed
- Support Windows（no linux, no macOS）
How to:
1. Download from Gdrive
2. Connect your 7T/Pro to your PC with usb cable
3. Double Click to run this tool
4. Just wait for 30 secs and your phone will reboot to system with magisk installed
Tips:
- For 7T、7Tpro and McLaren included
- For OyxgenOS and HydrogenOS, all versions
- Magisk 20.4 built-in
- For Chinese users, the full version is in my website: {Mod edit}
Credits:
- Thanks to @mauronofrio for his unofficial twrp.
Download
{Mod edit}

Thank you!
Just ran on a fresh bootloader unlock and is working great. Thank you!

Does this install twrp as well?

It does not install twrp

Nice I will try it as soon as I can unclock bootloader.

Worked great on latest beta! Thanks a lot

The tool was detected as a Trojan virus.

Pls answer. After this could i update my phone in the settings or i should turn off magisk module before update
Thanks

Im checking it with MalwareBytes let see whats this about
EDIT
Virus total and MalwareByte says no problem.

This works with the OP7T from T-Mobile?

DinoTheLegend27 said:
Im checking it with MalwareBytes let see whats this about
EDIT
Virus total and MalwareByte says no problem.
Click to expand...
Click to collapse
Kaspersky detected it as one. Hope others could also show us if they have the same issue.

4ektonik said:
Pls answer. After this could i update my phone in the settings or i should turn off magisk module before update
Thanks
Click to expand...
Click to collapse
no need to do that before upgrade

4ektonik said:
Pls answer. After this could i update my phone in the settings or i should turn off magisk module before update
Thanks
Click to expand...
Click to collapse
no need to do that before upgrade

jrogue86 said:
This works with the OP7T from T-Mobile?
Click to expand...
Click to collapse
yes

jrogue86 said:
This works with the OP7T from T-Mobile?
Click to expand...
Click to collapse
Looking at how this works *and since i also have the OP7T from TMo* , As long as your bootloader is unlocked this should work no problems

What' going to happen with new oos updates? Do we have to apply the update as usual and then apply again this tool? Does the tool needs to be updated to support every new oos update?
Thanks again for your work, I was really looking forward for this

The screenshot from Kaspersky :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

ZuLa said:
What' going to happen with new oos updates? Do we have to apply the update as usual and then apply again this tool? Does the tool needs to be updated to support every new oos update?
Thanks again for your work, I was really looking forward for this
Click to expand...
Click to collapse
Of course you need to use this tool again after upgrade。
But this tool is not version related。It works for all versions include future versions without update itself。

himtan said:
The screenshot from Kaspersky :
Click to expand...
Click to collapse
Maybe it is the “”bat to exe convert” tool reason, it is wrong result I think.
I can ensure there is no virus in this tool.

daxiaamu said:
no need to do that before upgrade
Click to expand...
Click to collapse
Thanks. And one more questions. Will be work after this Gogle pay.
After update do we need again do this procedure for root.
And after update do we need install magisk modulr or it will be saved after update ?

JOYUI 12.5 FOR GLOBAL?

Anyone can provide a clean TWRP backup? Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I got the update yesterday in the night. But forgot to save the OTA.zip how can I redownload the file to upload it on GDrive?? I tried using the adb logcat from a post in the forum but didn't get any link in the file

ciberworm said:
I got the update yesterday in the night. But forgot to save the OTA.zip how can I redownload the file to upload it on GDrive?? I tried using the adb logcat from a post in the forum but didn't get any link in the file
Click to expand...
Click to collapse
Where can i find the ota.zip file, i don't have the update yet so i'll try to save it for you guys when i get it

In unlocked bl with twrp tho. Official ota might not work for me. Hope someone could provide a TWRP flashable.zip
I dont mind doing a clean instal and btw since theyre pushing the updates for global, is there any news bout the release of kernel sources?
Edit: I guess i could flash it via twrp ill just re-root it again

Anyone who can pull the ota update for 12.5? Currently at DPX beta version and want to manually install the 12.5 version

XsaucerX said:
Where can i find the ota.zip file, i don't have the update yet so i'll try to save it for you guys when i get it
Click to expand...
Click to collapse
to get the zip file go to file manager after downloading the update(don't restart after update is downloaded). you'll see the update.zip out in the open in file manager

SON NGOC MAI said:
i have them. can even update from Mp1-2-3-4 ---> MBR Joyui 12.5 global official
Click to expand...
Click to collapse
Can you share the download link?

Hi TS, i dont received any update notification eventho i check them manually
Its on MQ3 with twrp. Maybe TWRP is the cause? Should i flash the recovery (comes with MQ3 inside payload.bin) via fastboot and reflash this one via local update and recheck update again?
Hope someone can guide me. Thank you

mohdschizo said:
Hi TS, i dont received any update notification eventho i check them manually
Its on MQ3 with twrp. Maybe TWRP is the cause? Should i flash the recovery (comes with MQ3 inside payload.bin) via fastboot and reflash this one via local update and recheck update again?
Hope someone can guide me. Thank you
Click to expand...
Click to collapse
MQ3 is for testing. you should get the official CN or global ROM.

slashyuz6 said:
MQ3 is for testing. you should get the official CN or global ROM.
Click to expand...
Click to collapse
Thank you for your reply
Would u mind share the link? My kids using BS3 CN. Quite hard to choose which is which actually.
Thank you in advanced

mohdschizo said:
Thank you for your reply
Would u mind share the link? My kids using BS3 CN. Quite hard to choose which is which actually.
Thank you in advanced
Click to expand...
Click to collapse
you can search in the forum for the global TWRP back up someone shared.

please share full backup rom miui 12.5 anyone who have?

Question Updates fail at 59%

I am trying to update my OP11. I follow the guide and what it says to do but my updates still fail at 59%. Anyone have any idea how to update it easy? I don't feel like rerooting it every update.

cabagekiller said:
I am trying to update my OP11. I follow the guide and what it says to do but my updates still fail at 59%. Anyone have any idea how to update it easy? I don't feel like rerooting it every update.
Click to expand...
Click to collapse
Update with Magisk installed? Did you restore the stock boot.img before updating?

WoKoschekk said:
Update with Magisk installed? Did you restore the stock boot.img before updating?
Click to expand...
Click to collapse
Yes I did. I don't reboot the device when I do it do I?

cabagekiller said:
Yes I did. I don't reboot the device when I do it do I?
Click to expand...
Click to collapse
No, do not reboot. But grab some logs from logcat and dmesg (kernel log) after update process fails. You just need the last lines when you grab it right after the error message.
1. Start update process
2. As soon as it fails open a terminal app and execute
Code:
logcat > /sdcard/logcat.txt
dmesg > /sdcard/kernel.txt
3. Find the logs in your intenal storage and have a look at the last lines of it.

You need to execute those commands as root (su).

cabagekiller said:
I am trying to update my OP11. I follow the guide and what it says to do but my updates still fail at 59%. Anyone have any idea how to update it easy? I don't feel like rerooting it every update.
Click to expand...
Click to collapse
you download stable full package in oxygen updater than flash with local updater apk.

sefai77 said:
you download stable full package in oxygen updater than flash with local updater apk.
Click to expand...
Click to collapse
Us have no full pack

ChrisFeiveel84 said:
Us have no full pack
Click to expand...
Click to collapse
But the updated firmware images on your device. Extract and upload them for other users, so they could be flashed on their devices to the inactive slot via fastboot. To know which partitions are needed you could extract a payload.bin of a full rom OTA update in other countries.

WoKoschekk said:
But the updated firmware images on your device. Extract and upload them for other users, so they could be flashed on their devices to the inactive slot via fastboot. To know which partitions are needed you could extract a payload.bin of a full rom OTA update in other countries.
Click to expand...
Click to collapse
Will Not work he have an usa model and the usa inrcemantal Update will fail when he have eu full rom on his phone

ChrisFeiveel84 said:
Will Not work he have an usa model and the usa inrcemantal Update will fail when he have eu full rom on his phone
Click to expand...
Click to collapse
I guess, there should be at least one user in the OP 11 forum here at XDA with a successful installed OTA update for US region. On this device you have the fully updated entire firmware images, that can be copied, uploaded and flashed on all the other devices that are not able to load the incremental OTA update due to root.

I was shown this picture,, what does this issue?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

IronSkillet said:
I was shown this picture,, what does this issue?
View attachment 5866531
Click to expand...
Click to collapse
in the photo it looks like it couldn't download otas if you look at this (that's not a real rom name)
or an extra rom that is not intended for everyone " don't take it too seriously ")

How would he get rid of the problem?
This guy insisted the phone is broken..
I just want to point out a solution for the issue

IronSkillet said:
How would he get rid of the problem?
This guy insisted the phone is broken..
I just want to point out a solution for the issue
Click to expand...
Click to collapse
Is this a china op11 with oos on it ?

Yes, I guess he also had A_07 when he received the phone
I had used OxygenUpdater and it had no issues going A_08 ,

IronSkillet said:
Yes,
Click to expand...
Click to collapse
Than you have to download the rom and flash it over fastbootd and than flash the cos image back (only oplusstanvbk.img needed from cos 13 a10 build)

Ok,. Do you know a reputable community member who could do this process for him via remote support?

IronSkillet said:
Ok,. Do you know a reputable community member who could do this process for him via remote support?
Click to expand...
Click to collapse
Youtube video
Is easy to flash a phone with fbe and fasbootd and than flash thr the image from coloros oplusstanvbk.img
To the oplusstanvbk partition and reboot

He somehow doesn't want to make any effort in understanding the phone...
Anyone who can do this for him?

IronSkillet said:
He somehow doesn't want to make any effort in understanding the phone...
Anyone who can do this for him?
Click to expand...
Click to collapse
This he have to make for all Updates