Related
Is there someone who test it already...I like to flash it but odin asking pit file. Odin fail pit security. What I need to do?
flash with odin 3.13.1.... everything works well besides the nfc also flash ap cd csc/home csc from android 8 but choose a bootloader from android 7 some u dont get the lock
nekos95 said:
flash with odin 3.13.1.... everything works well besides the nfc also flash ap cd csc/home csc from android 8 but choose a bootloader from android 7 some u dont get the lock
Click to expand...
Click to collapse
Fail still re-partition. Ask to set pit...
nekos95 said:
flash with odin 3.13.1.... everything works well besides the nfc also flash ap cd csc/home csc from android 8 but choose a bootloader from android 7 some u dont get the lock
Click to expand...
Click to collapse
Can u link files u downloaded? re-partition fail
Or do I need pit file to flash
Is wifi working too ?
Can we root Oreo?
And have TWRP also?
And revert back to Nougat if we want?
Excuse me if the questions are asked before..
broky said:
Can we root Oreo?
And have TWRP also?
And revert back to Nougat if we want?
Excuse me if the questions are asked before..
Click to expand...
Click to collapse
Not sure
Yes
Yes
if you want a clean install first install Nougat BL AP CP CSC of your device. After first boot on the settings screen, shutdown the device and go into bootloader mode, select AP from OREO, no other one, only AP. Press start and you A320FL will be upgrade to OREO. I installed Russia Oreo on A320Y
Sorry for my bad english
---------- Post added at 04:07 AM ---------- Previous post was at 04:02 AM ----------
I used Odin 3.13.1
Riicardogmz said:
if you want a clean install first install Nougat BL AP CP CSC of your device. After first boot on the settings screen, shutdown the device and go into bootloader mode, select AP from OREO, no other one, only AP. Press start and you A320FL will be upgrade to OREO. I installed Russia Oreo on A320Y
Sorry for my bad english
---------- Post added at 04:07 AM ---------- Previous post was at 04:02 AM ----------
I used Odin 3.13.1
Click to expand...
Click to collapse
Hey thanks that works now oreo on my 320fl.
Does it factory reset the phone ? I mean we don't have to put an oreo CSC ?
Just clean flashed nougat...
WiwiPouPou said:
Does it factory reset the phone ? I mean we don't have to put an oreo CSC ?
Just clean flashed nougat...
Click to expand...
Click to collapse
First flash clean nougat and use nougat fles only. When it boot first time where you start putting settings language etc. Shut down and flash only oreo AP file-> done
Its reset your phone...
CSC Oreo will get error of pit file wrong. BL Oreo will get error of Bootloader wrong. CP Oreo will get error of modem wrong. AP Oreo only contain upgrade files, this file is the correct to upgrade. Now, if you want a clean install, first flash Nougat and then flash only AP file from Russia Oreo, other ones files (BL, CP, CSC) are get error because not corresponding to device
Riicardogmz said:
CSC Oreo will get error of pit file wrong. BL Oreo will get error of Bootloader wrong. CP Oreo will get error of modem wrong. AP Oreo only contain upgrade files, this file is the correct to upgrade. Now, if you want a clean install, first flash Nougat and then flash only AP file from Russia Oreo, other ones files (BL, CP, CSC) are get error because not corresponding to device
Click to expand...
Click to collapse
Any possibility to keep data or restore from a TWRP backup?
Or can i directly flash AP file on nougat without loosing data?
EDIT:I was in nougat and i just flashed AP from Oreo directly,worked fine but did not keep my data,resetted the phone.
tried to flash recovery and failed.
EDIT2:suceeded with this https://forum.xda-developers.com/samsung-a-series-2017/development/recovery-a3-2017-t3758969
got root also flashing latest superuser zip:good:
So pop-up Window not working ?
Sorry guys for i am new to all this Samsung Knox Stuff - will this procedure (flash clean nougat first and then oreo AP only) trip the KNOX counter?
Thanks!
Doenen
doenen said:
Sorry guys for i am new to all this Samsung Knox Stuff - will this procedure (flash clean nougat first and then oreo AP only) trip the KNOX counter?
Thanks!
Doenen
Click to expand...
Click to collapse
Yes it's trip your Knox...I think. I flashed Russia version, but I was rooted already.
doenen said:
Sorry guys for i am new to all this Samsung Knox Stuff - will this procedure (flash clean nougat first and then oreo AP only) trip the KNOX counter?
Thanks!
Doenen
Click to expand...
Click to collapse
Flashing an official stock ROM (with Odin) should never trip Knox. At least it never happened to me with other Samsung phones (Galaxy Ace, Galaxy S3 Mini, Galaxy Alpha). I haven't tried with this one, but I bet it will be safe.
I have a Samsung A7 2017 (SM-A720F) brought from UAE having latest Oreo update. While I tried to flash an INS version over this Odin detects the phone. But after hitting start it takes some time and gives error like failed. I also tried to root it with CF-AutoRoot file. Those also have the same error. Developer mode, USB debugging and OEM unlock are ON. Trying with windows 10 + Odin 3.13 (latest). Any solution ?
Combination file successfully flashed. But, still not able to flash another country File. Can I proceed with original country file (i.e XSG stock firmware) ?
Please help me
MajjuBhai said:
I have a Samsung A7 2017 (SM-A720F) brought from UAE having latest Oreo update. While I tried to flash an INS version over this Odin detects the phone. But after hitting start it takes some time and gives error like failed. I also tried to root it with CF-AutoRoot file. Those also have the same error. Developer mode, USB debugging and OEM unlock are ON. Trying with windows 10 + Odin 3.13 (latest). Any solution ?
Click to expand...
Click to collapse
Root with twrp and magisk, cfautoroot is OG in my opinion . Try flashing just CSC_home or whatever it is called in Odin.
SnowFuhrer said:
Root with twrp and magisk, cfautoroot is OG in my opinion . Try flashing just CSC_home or whatever it is called in Odin.
Click to expand...
Click to collapse
I'm able to flash Combination file, original country (XSG) file and also flashes TWRP. But, I can't get access to TWRP after flashing it. Always it replaced by Stock recovery. And apart these 3 files nothing flashes, including CSC file alone...
MajjuBhai said:
I'm able to flash Combination file, original country (XSG) file and also flashes TWRP. But, I can't get access to TWRP after flashing it. Always it replaced by Stock recovery. And apart these 3 files nothing flashes, including CSC file alone...
Click to expand...
Click to collapse
When you flash twrp, untick auto reboot in odin. Boot straight into twrp without booting system.
SnowFuhrer said:
When you flash twrp, untick auto reboot in odin. Boot straight into twrp without booting system.
Click to expand...
Click to collapse
Ok Boss. One last question. After rooting my phone Can I able to flash any country Firmware on my phone ?
If Yes, Any precuations to be taken ?
(Currently it is on RMM State : Prenormal, I will try flashing TWRP after a couple of days.)
MajjuBhai said:
Ok Boss. One last question. After rooting my phone Can I able to flash any country Firmware on my phone ?
If Yes, Any precuations to be taken ?
(Currently it is on RMM State : Prenormal, I will try flashing TWRP after a couple of days.)
Click to expand...
Click to collapse
It won't help change the csc. But hadesrom oneui has a huge selection of csc's you can select when flashing it.
SnowFuhrer said:
It won't help change the csc. But hadesrom oneui has a huge selection of csc's you can select when flashing it.
Click to expand...
Click to collapse
If I flashed HadesROM OneUI with 'INS' CSC can I able to downgrade it with INS Stock firmware in future ?
Is the binary thing really need to consider while flashing that ?
PS : I looked on HadesROM. It is temptating. But, the real problem is with VoLTE which affects the network badly here... The VoLTE only network is a large mess here... And thanks for your unconditional Help & Support :fingers-crossed:
MajjuBhai said:
If I flashed HadesROM OneUI with 'INS' CSC can I able to downgrade it with INS Stock firmware in future ?
Is the binary thing really need to consider while flashing that ?
PS : I looked on HadesROM. It is temptating. But, the real problem is with VoLTE which affects the network badly here... The VoLTE only network is a large mess here... And thanks for your unconditional Help & Support :fingers-crossed:
Click to expand...
Click to collapse
It should work to change csc with Hades and then flash stock. Just make sure you don't reflash csc then because it could change.
Must Have An Unlocked Bootloader To Do This!
This An odin tar file I have created to flash along with stock odin firmware to automatically install TWRP recovery along with Disable VBMETA image. The tar file will also automatically install magisk root along with remove force encryption and patch bluetooth library file. It will also patch safetynet. No flashing of zips is required
Info For Bootloader Unlocks Can Be Found In Post 2
I Do Not Recommend Mixing Bit 4 With Higher Firmware!!!!
Unless Using Bit Safe Firmware That Is Patched
Downloads
SM-G975U/U1/W- Model
USERDATA_AIO_G975_CANARY_FORCE_WIPE_2022_01_28.tar.md5 --Use on android 11 or 12
This will force a wipe of data no mater what.
Full Odin 4.0 Android 12 Bit4 Safe Firmware
G975USQU6HULD_BIT4_SAFE.7z
This are odin files and will safely update all image files too bit 6 and keep bit 4 bootloaders. Unfortunately this will wipe data this is beyond my control as it seems to be a side affect of mixing firmware it causes data not to mount and therefore my AIO will format it. This is full firmware with USERDATA_AIO. This will put you on U firmware. Before flashing I recommend removing your google account and make sure in download mode you are not frp locked
If above USERDATA_AIO_G975_FORCE_WIPE_08_35_21.tar.md5 is newer than the one in this zip use the newer one from above
Odin3_v3.14.1_3B_PatcheD.zip
Files For SM-G973 Found Here
Files For SM-G970 Found Here
TWRP Recovery Provide by @afaneh92
Be prepared to have your data wiped. The process tries to determine if you do or do not need to have data wipe but as a precaution just assume your data will be wiped. Especially if using U1 or W firmware
Install Instructions For Newly Unlocked Devices
You must be OEM Unlocked Bootloader
1. On Initial unlock of phone you must through setup and be signed into your google account.
2. Reboot phone too download mode and make sure KG STATUS=CHECKING (see pic) and not PRENORMAL. If PRENORMAL then do step 1 again
View attachment 5217631
3. Use patched 3.14 odin and load file USERDATA_SLOT_*9**U_**.tar.md5 you must choose one of the FORCE_WIPE files and load in the USERSDATA slot of odin and flash file
4. Phone will reboot to TWRP and remove encryption which will wipe phone. Phone will reboot back too TWRP to finish install then reboot to setup
Install Instructions For Updating Firmware On Phone Already Unlocked
1. Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above
2. Use patched 3.14 odin and load stock firmware in appropriate slots use regular CSC file in the CSC slot and load file one of the USERDATA_SLOT_*9**U_**.tar.md5 in the USERSDATA slot of odin and flash firmware. Do not use the User Data file that comes with firmware.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not
Install Instructions If Updating Images With TWRP
1. When done flashing images in TWRP Reboot phone too download mode and make sure KG STATUS=CHECKING. If not see above.
2. Use patched 3.14 odin and load file USERDATA_AIO_*9**_NO_WIPE_NO_BL.tar.md5 in the USERSDATA slot of odin and flash file.
3. Phone will reboot to TWRP and check for encryption and remove if needed which will wipe phone. If phone is not encrypted data will not be wiped. Phone will reboot back too TWRP to finish install then reboot to setup if data was wiped or reboot normally if it was not.
4. Alternatively to using USERDATA_AIO_*9**_NO_WIPE_NO_BL.tar.md5 in odin you can use AIO_Magisk_21_4_S10U_US_Series_Android_R.zip found in post 2
Features
No patches or mod zips are needed phone will already be rooted
Fix Safetynet
Bluetooth is patched for pairing to survive reboots
Samsung Health working
Bugs
Samsung Pay, Secure Folder and Samsung Pass do not work as on most Samsung Rooted Roms
Thanks To People That Make My Life Easier
@elliwigy
@klabit87
@Krog18
@me2151
@stang5litre
@Raymonf for modified odin
@rayan-refoua for boot animation
@TheMadScientist
@afaneh92
@kdrag0n for safetynet fix
3arthur6 for bluetooth patch zip
@JDBarlow for test S20 stuff
Info For U Model Bootloader Unlocking Can Be Found
[Android][UNSAMLOCK] Bootloader Unlock for Samsung US/Canada Devices
This thread is @svetius approved Important notice: Do not update to April 2023 security update (XXXXXXXXXXWCX) or later. Examples: G998USQS6EWCA, N986USQU4HWD1. Samsung has patched the bootloader unlock again on those updates. NOTE: The OneUI...
forum.xda-developers.com
Below US snapdragon devices can be bootloader unlocked with above service as long as bootloader version meets below criteria. Bootloader version can be determined from the 5th character from the right on the baseband version or build number, in some cases from kernel version
Z Fold2 5G BL V1
Fold 5G BL V1-4
Fold BL V1-4
Z Flip 5G BL V1
Z Flip BL V1-3
Note series 20 BL V1
S20 series BL V1
S20 FE 5G BL V1-2
Note 10 series BL V1-5
S10 Lite BL V1-3
Note 10+ 5G N976U BL V1-4
Note 10+ 5G N976V BL V1-5
S10 5G BL V1-5
S10 series BL V1-4
Note 9 BL V1-7
S9 series BL V1-9
Tab S6 BL V1-3
Tab S7 BL V1
Tab S7+ BL V1
A71 5G BL V1-2
A51 BL V1-5
A51 5G BL V1-4
A50 A505W BL V1-A
A50 A505U BL V1-B
S21 BL V1
A32 5G BL V1-3
Tab Active Pro 10.1 BL V1-4
XCover Pro BL V1-7
Nice work!
deleted*
I update the tar file so now only one is needed for android 10 or 11 and I and I changed the safenet fix to the latest one that patches your own keystore file thanks @afaneh92 for the module and have it install as a magisk module so it doesnt affect system files that way if a bettery way comes out you can simply update the module and not have too worry about replacing system files. If you have used my old tar to root your phone I suggest reflashing stock firmware in odin along with my new tar file and this will remove the safetynet files from system and too the module
it's not working in g975f right ?
Has anyone confirmed this is working correctly other than the noted things that don't?
Fixed issues where if bluetooth or keystore files are already patched in system by other means then my installer will just skip them instead of failing during flash
MikeyLee said:
Has anyone confirmed this is working correctly other than the noted things that don't?
Click to expand...
Click to collapse
I updated OP files fixed a few issues added CSC mods back to flash. It works plus secure folder works on android 11
Add files for SM-G975W Canadian Model
can you can SM-G9750 pls ?
Vuska said:
can you can SM-G9750 pls ?
Click to expand...
Click to collapse
This one should work on SM-G9750
USERDATA_SLOT_G975W_AIO_TWRP_VBMETA_ANDROID_R.tar.md5
So is safety net disabled?
Can i use this guide for my s10plus japan g975j
anhkoya5 said:
Can i use this guide for my s10plus japan g975j
Click to expand...
Click to collapse
I will post a stuff so all can make there own shortly
Am i out of luck if i am on 9.0 still? Kinda rare to be on Bin 1 still and i wanna keep it that way.
Which .img @AndroidFileHost may be flashed 4 the Pie ROM?
I have One UI 3.0 with bl 4 (5th character from the right is a 4 in build number). which file do i flash? force_wipe_no_bl? or force_wipe_v1?
Hello.
I tried the procedure on an locked SM-G975U device, which failed in Odin.
The problem is that the phone now keeps booting in DL mode with "An arror has occured while updating the device software. Use Emergency recovery function in the Smart Switch PC software".
I tried to use Smart Switch, downloaded from the samsung site (v4.2), but the said recovery procedure does not see my device...
After a while playing with boot loader key combination, it eventually rebooted OK, and after another while, I can enter again in the usual download menu.
Can the price be lower if the number of mobile phones is more？
so i thoght of installing the new snake os as i had bl unlocked on my f62 and it was rooted. it was running android 11 from may previous year i think. i uninstalled the magisk from manager and it rebooted and went into bootloop ,i thoght probably it was coz bl was unlocked, then i went into download mode and locked bl and it requested me to flash a firmware, i downloaded the latest firmware from frija and flashed it using odin and when i reboot it it goes back in download mode and says something like" bootloader : hash of data does not match digest in descriptor. i flashed it multiple times and even nand reset it but it goes in download mode after restart.
EDIT : sorry my bad i was just flashing the ap tab ,didnt knew i gotta flash the other tabs as well, newbies like me can learn from my mistake and dont panik flash anything without knowling, thank you very much.
Inder25539 said:
so i thoght of installing the new snake os as i had bl unlocked on my f62 and it was rooted. it was running android 11 from may previous year i think. i uninstalled the magisk from manager and it rebooted and went into bootloop ,i thoght probably it was coz bl was unlocked, then i went into download mode and locked bl and it requested me to flash a firmware, i downloaded the latest firmware from frija and flashed it using odin and when i reboot it it goes back in download mode and says something like" bootloader : hash of data does not match digest in descriptor. i flashed it multiple times and even nand reset it but it goes in download mode after restart.
EDIT : sorry my bad i was just flashing the ap tab ,didnt knew i gotta flash the other tabs as well, newbies like me can learn from my mistake and dont panik flash anything without knowling, thank you very much.
Click to expand...
Click to collapse
DONT WORRY JUST REFLASH STOCK FIRMWARE USING ODIN OR HEAD OVER TO https://t.me/SamsungGalaxyF62Discussion.
DOWNLOAD FIRMWARE FROM OTHER WEBSITE.
This line tells you that the firmware you have flashed is corrupted.
hash of data does not match digest in descriptor
rc chanu said:
DONT WORRY JUST REFLASH STOCK FIRMWARE USING ODIN OR HEAD OVER TO https://t.me/SamsungGalaxyF62Discussion.
DOWNLOAD FIRMWARE FROM OTHER WEBSITE.
This line tells you that the firmware you have flashed is corrupted.
hash of data does not match digest in descriptor
Click to expand...
Click to collapse
He had solved his problem by "Edit" bro
hi guys,
so finally the update for european devices is available.
normally the update runs automatically but my fold is rooted and due to that it will not update.
how is the procedure to update and keep my root and my personal data?
thanks in advance
Interesting
Same question for me...
What i planning to do for now:
- Backup everything with Migrate.
- Update with sideloading Odin (patched AP file).
- Restore everything with Migrate.
Other ideas?
will it be enough only to flash the PDA file? i assume you have to flash BL, PDA, CSC and Home CSC??
push
push!
nobody out there with rooted device and the intention to update???
Thrudvangar said:
push!
nobody out there with rooted device and the intention to update???
Click to expand...
Click to collapse
Grab your latest firmware , get the AP file and patch it with your magisk app
Then Odin flash the full firmware , using the AP magisk patchfile @ AP Tab
Use CSC_HOME file @ CSC Tab ( to keep all your data and actual setup )
Done > Updated with root + data + setup
pvillasuso said:
Grab your latest firmware , get the AP file and patch it with your magisk app
Then Odin flash the full firmware , using the AP magisk patchfile @ AP Tab
Use CSC_HOME file @ CSC Tab ( to keep all your data and actual setup )
Done > Updated with root + data + setup
Click to expand...
Click to collapse
hi. thank you for your quick reply.
so i only need to flash the patched AP and the csc file?
from where i get the home csc file?
Thrudvangar said:
hi guys,
so finally the update for european devices is available.
normally the update runs automatically but my fold is rooted and due to that it will not update.
how is the procedure to update and keep my root and my personal data?
thanks in advance
Click to expand...
Click to collapse
All about the durability in new galaxy z fold 4 https://shrinke.me/epcVGB
javid231412 said:
All about the durability in new galaxy z fold 4 https://shrinke.me/epcVGB
Click to expand...
Click to collapse
what?
Thrudvangar said:
hi. thank you for your quick reply.
so i only need to flash the patched AP and the csc file?
from where i get the home csc file?
Click to expand...
Click to collapse
You need to flash the full firmware via Odin ( 4 files ) , as I wrote in my previous post
So, Have you ever used Odin before ?
Samsung Firmware Download - Lastest official firmware update
Samsung Firmware Download ⭐ Official and fast update ⭐ Lastest and old version ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
pvillasuso said:
You need to flash the full firmware via Odin ( 4 files ) , as I wrote in my previous post
So, Have you ever used Odin before ?
Samsung Firmware Download - Lastest official firmware update
Samsung Firmware Download ⭐ Official and fast update ⭐ Lastest and old version ⭐ Max speed and free download ⭐ Best Samsung Galaxy website
samfw.com
Click to expand...
Click to collapse
Yeah, of course. I rooted my device so i used odin.
okay. i take the 4 files and the home_csc file.
i hope data will not be wiped and magisk/root and lsposed keep active after update
please delete
Thrudvangar said:
Yeah, of course. I rooted my device so i used odin.
okay. i take the 4 files and the home_csc file.
i hope data will not be wiped and magisk/root and lsposed keep active after update
Click to expand...
Click to collapse
Yes, but use the AP "magisk patched" file @ the AP Tab ! ( to keep the root )
it worked. thank you so much
Thrudvangar said:
it worked. thank you so much
Click to expand...
Click to collapse
Sure , No Prob
Glad it worked !
Thanks
I will use this thread and update the "How To ROOT" thread.
- Can i update my Fold 4 after root?:
Automatic updates will not work!
You can however download new firmware and keep your data: see pvillasuso hist post:
https://forum.xda-developers.com/t/update-and-keep-root-and-data.4504467/#post-87583223
Grab your latest firmware , get the AP file and patch it with your magisk app
Then Odin flash the full firmware , using the AP magisk patchfile @ AP Tab
Use CSC_HOME file @ CSC Tab ( to keep all your data and actual setup )
Done > Updated with root + data + setup
Thrudvangar said:
what?
Click to expand...
Click to collapse
That link is a hoax.
pvillasuso said:
Grab your latest firmware , get the AP file and patch it with your magisk app
Then Odin flash the full firmware , using the AP magisk patchfile @ AP Tab
Use CSC_HOME file @ CSC Tab ( to keep all your data and actual setup )
Done > Updated with root + data + setup
Click to expand...
Click to collapse
What about new updates after rooting? Will they be installed automatically or just downloaded the same why, or do we have to go fishing?
Stray doggy said:
What about new updates after rooting? Will they be installed automatically or just downloaded the same why, or do we have to go fishing?
Click to expand...
Click to collapse
As you are rooted, you will NOT receive OTA updates. You will need to Download the firmware, patch the AP file on phone with Magisk and flash the entire firmware in ODIN (using the Patched AP file)...
This has been stated multiple times...
If you did get n OTA update it would cause problems as it would most definitely unroot your phone...