Develop Bugs

[HOW TO]Guideline / Install MTK drivers / How to Root / Flash a Rom / IMEI Restore

In this Thread i will explain how to set up MTK drivers and Flashtools.
Guideline:
Post #1 : Set up MTK drivers in Windows 8 / 8.1 / 10
Post #2 : Use Flashtools for MTK Devices
Post #3 : How to Flash Custom Roms / Roms download Guide / How to Root Stock Rom
Post #4 : Windows 10 MTK Drivers installation ( just in case post #1 dont work )
Post #5 : Lost IMEI Backup​
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
How to Install MTK drivers in Windows 8 / 8.1 / 10
what we need:
MTK Vcom Preloader Driver 2.0
Download : https://www.androidfilehost.com/?fid=24438995911977169
First thing we need is to Disable the Signed Driver verification on Windows :
To disable driver signature verification, we’re going to need to get into the Troubleshooting options from the boot manager.
The easiest way to bring this screen up is using this secret trick.
Hold down the SHIFT key while you click Restart.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Once your computer has rebooted you will be able to choose the Troubleshoot option.
Then head into Advanced options.
Then Startup Settings.
Since we are modifying boot time configuration settings, you will need to restart your Computer one last time.
After restarting your computer a second time,
choose Disable driver signature enforcement from the list by typing the number 7 on your keyboard.
That’s all there is to it. Your PC will then reboot and you will be able to install unsigned drivers.
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>
Now its Time to open SP_Driver_v2.0.zip and start the DriverInstall.exe
it will open the install prompt . Press okay and dont change the installation path
Code:
C: // program files / Mediatek / Driver Package
during the installation it will start the verification window security.
Click on Install this driver software anyway
There will be an Error Message . - We Ignore it !
-Now Open your Device Manager and leave it open.
-Power Off your Phone and connect it with your Pc.
-you will see Under ports ( COM & LPT ) a Preloader unknown device
right click on there and click on Driver update/installation.
-Choose manually search for drivers
-Browse to C:// program files / Mediatek / Driver Package and apply.
-If all went good you have successfully installed the MTK Vcom Drivers. :good:
<><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><><>​

How to Use Flashtools
i use SP_Flash_Tool_Windows_v5.1520.00.000 and never had a problem with it.
Its for most all MTK Phones and for all Elephone Devices
Download Link: https://www.androidfilehost.com/?fid=24438995911977217
- Extract the Flashtool zip folder to your Desktop
- Click flash_tool.exe to open the Tool
- You will see two "folder buttons" Download agent and Scatter-loading
- Into Download agent place the MTK_AllInOne_DA.bin file .
its in your Flashtools folder
- Into Scatter-loading place the Scatter.txt
All Stock Roms / Custom Recoverys have one Scatter.txt in their Zip files.
- Make sure that every partition is checked
-IMPORTANT NOW, Flashing Part-
-Power Off your Device!
-Press on the Download Button!
-Connect your Device with PC and wait until all is flashed
-you will see a Green Mark when all is done
-Disconnect your Device and press Power button to Reboot.
:fingers-crossed::good::fingers-crossed:
------------------------------------------------------------------------------------------------------------------------------------------------​

How to Install Custom Roms
You don't need to root your phone to use Custom Roms like
Eragon Rom
or
Nexus Rom
because within installation it will get root with SuperSU
P.s: if you run into a problem e.g Bootloop . (newest Rom dont work well with our Custom Roms , related to its Partition.Img)
You could Flash the Stock ROM 02150725 to solve it
--------------------------------------------------------------------------------------------------
1. Place the Rom.Zip into your Internal or External Sdcard
2. If you are on Stock Rom just Flash a Custom Recovery
Best Recovery without any bug is Philz v2 but you can also use Twrp Recovery
3. Hold Vol+ and Power simultaneously
you will get into the Bootloader Menu
4. Navigate with Vol+ to Recovery and apply with Vol-
5. In Recovery perform a Fullwipe , wipe System , Data , Cache , Dalvik
(In Philz Recovery wipe "clean to install a new rom"
In TWRP Recovery Wipe /advanced Wipe /wipe System,Data,Cache,dalvik)
6. Install the Rom.Zip located in your Sdcard
7. Reboot
<><><><><><><><><><><><><><><><><><><><><><><><><> <><><><><><><><><><><><><><><><><><><><><><><><>
Custom Roms and Stock Roms
Eragon Rom - http://forum.xda-developers.com/elephone-p8000/development/rom-06-9-eragon-1-0-android-5-1-t3195007
Nexus Rom - http://forum.xda-developers.com/elephone-p8000/development/rom-nexus-t3235626
CyanogenMod 12.1 - http://forum.xda-developers.com/elephone-p8000/orig-development/rom-cyanogenmod-12-1-p8000-t3259022
Flyme - http://bbs.elephone.hk/thread-8682-1-1.html#.VuQ3WYQrHIU flash via Flashtools
Vibe - http://bbs.elephone.hk/thread-8192-1-1.html Flash via Flashtools
Emui - http://forum.xda-developers.com/ele...-emui-v3-1-lite-04-02-2016-android-5-t3309296
Stock Roms
2015.07.25 - http://bbs.elephone.hk/thread-6536-1-4.html#.VuQ3C4QrHIU
2015.08.15 - http://bbs.elephone.hk/thread-7096-1-4.html#.VuQ3DoQrHIU
2015.09.07 - http://bbs.elephone.hk/thread-7743-1-2.html#.VuQ3QYQrHIU
2015.10.14 - http://bbs.elephone.hk/thread-8751-1-2.html#.VuQ3K4QrHIU
2015.11.05 - http://bbs.elephone.hk/thread-9163-1-2.html#.VuQ3NYQrHIU
2015.12.03 - http://bbs.elephone.hk/thread-9415-1-1.html#.VuQ3UYQrHIU
2016.02.17 - http://bbs.elephone.hk/thread-9898-1-1.html#.VuQ3SYQrHIU
Custom Recoverys
Philz v2: https://www.androidfilehost.com/?fid=24052804347838441
Twrp 2.8.7.0 : https://www.androidfilehost.com/?fid=24269982086997788 thx hanuma
Twrp 3.0.0.0 : https://mega.nz/#!wZM01byD!JTkRCVaJoxm5YmE2sFQBB2e1wnDIYo1AWAetqY8e60o thx hanuma
SuperSU root
Thread:
http://forum.xda-developers.com/showthread.php?t=1538053
100% bug free Supersu v.2.46.zip
https://download.chainfire.eu/696/SuperSU/
<><><><><><><><><><><><><><><><><><><><><><><><><> <><><><><><><><><><><><><><><><><><><><><><><><>
How to Root Stock Rom
-If you want to Root your prefered Stock Rom
-Place SuperSU into your Sdcard
-Flash a Custom Recovery with Flashtools and its Scatter.txt
-Hold Vol+ and Power to get into Bootloader Menu
-Navigate with Vol+ and apply Recovery with Vol-
-Flash Supersu.zip
-Reboot​

Windows 10 MTK VCOM USB Drivers for 32 & 64 bit + Driver install tutorial
To determine the version of Windows 10 that you have (32 bit or 64 bit):
- Right-click on Start then click on System
- In the System window that opens, in System section, you will find your version of Windows next to System type
To disable Windows 10 64 bit driver signature enforcement:
- On your 64 bit Windows 10 desktop click on Start then on Settings
- Click on Update & security then in the left pane click on Recovery
- Under Advanced startup click on Restart now button
- Click on Troubleshoot then on Advanced options
- Click on Startup Settings then on Restart button
- The computer will restart with the Startup Settings screen
- To disable the driver signature enforcement until next restart press on number key 7 or F7 on your keyboard.
- After restart you can proceed with the unsigned MTK drivers installation for your 64 bit Windows
- After you install the unsigned drivers, to use them again in the future, you have to repeat this procedure
To install the MTK VCOM USB Drivers on 32 & 64 bit Windows 10:
- Download the drivers *.zip archive and extract the folder from inside on to the desktop:
https://www.androidfilehost.com/?fid=24269982087012126
Right-click on Start then click on Device Manager
In the Device Manager Window click on the first item – your computer name
Click on Action then Add legacy hardware
On the Welcome to the Add hardware Wizard window click on Next button
Select Install the hardware that I manually select from a list (Advanced) and then click on Next button
Click on Show All Devices then on Next button
In the Add Hardware window click on Have Disk… button
In the Install From Disk windows click on Browse… button
In the next window – Locate file – browse for the folder that you have extracted on the desktop at the beginning
Select the version of the driver according to your Windows 10 version – x64 for 64 bit and x86 for 32 bit and click Open button
Click the OK button to load the driver
From the list of drivers select MTK USB Port and click on Next button
If a red warning window will open, click on Install this driver software anyway
This action will add the following drivers in to the operating system:
- MediaTek DA USB VCOM Port
- MediaTek PreLoader USB VCOM Port – for transferring the firmware to your device
- MTK USB DEBUG Port
- MTK USB Modem Port
- MTK USB port – for transfering PreLoader to your device (and recovery in case of bad or corrupt firmware)
Now we need to remove the device that we have installed but leave the drivers in the operating system.
To do that, in the Device Manager window we expand Ports (COM & LPT) section
Right-click and click Uninstall on the MTK USB Port
- In the Confirm Device Uninstall window make sure that the box Delete the driver software for this device is empty
- You need to leave the drivers in the operating system and only remove the device that you added
- Click on the OK button to finalise
Now, when you will connect your turned off MTK device to the Windows 10 computer by USB, the device will be recognized either trough a MediaTek Preloader USB VCOM Port interface or as a MTK USB port if it is bricked or it has bad/corrupt firmware. The SP Flash Tool will be able to transfer the firmware to your device trough this interfaces. Make sure you connect the device after you press the Download button in SP Flash Tool, as the communication interface will only be alive for 2 seconds if no data is being sent.
Download SP Flash Tool v3 & v5 – Latest versions:
http://laurentiumihet.ro/technology/download-sp-flash-tool-v3-v5-latest-versions/
TUT found here : http://laurentiumihet.ro/technology...-for-32-64-bit-drivers-installation-tutorial/
cheers​

Lost IMEI Restore
A common problem many face in their phone is loss of IMEI no. This is results in no network detection by your phone. U can come to know you have lost your IMEI by checking Settings->About phone->Phone information. There under IMEI section you won’t be finding your mobile IMEI numbers displayed.
Don’t worry you can restore your IMEI’s. Just follow this guide and you will be able to restore your IMEI. I will split the tutorial into two parts.
BACKING IMEI :
-First step before performing all these things is that your phone should be rooted.
When your phone is in normal state with everything functioning install Root explorer and navigate to the below location
Code:
>ROOT>DATA>NVRAM>MD>NVRAM>NVD_IMEI>MP0B_001
-Now copy this MP0b_001 file to your SD card or PC whichever place you feel the file we be safer.
-Now download MTK Droid tools .
-Now extract the zip file and open the MTK droid tools exe file.
-Now in your phone turn on USB Debugging by going to Settings->About phone-> Developer options and there turn on USB debugging.
-Now connect your phone and MTK droid tools should be able to detect your phone. U should see a window like this appearing after your
phone has been detected.
-Now press the ROOT button present in lower right corner. When it asks Supersu grant in your mobile click allow. After MTK droid gets
access u should see a green colour box appearing in the lower left corner which means u have correctly granted access to MTK droid.
-Now click on the IMEI/Nvram tab. A window should open and click backup NVRAM and MTK droid tools would take a backup of NVram in
its folder.
RESTORING IMEI :
-Now when you lose IMEI first try this method. Now take the MPDB_001 file which you took backup at the first step and navigate through
Root explorer to this location ->ROOT->DATA->NVRAM->MD->NVRAM->NVD_IMEI.
-Now paste that file and replace the one present there. Set the permissions for that file as RWER-ER-E. Now reboot your phone and you
should be able to get your IMEI back.
If you still haven’t got IMEI open MTK droid tools and connect your phone and press ROOT again and give MTK droid tools root access.
-Now click on IMEI/Nvram tab and select Restore option and restore the NVram backup which you took earlier. Now reboot your phone and
you should be able to get your IMEI.
Extreme method :
-After performing all the above if you haven’t still got IMEI. Now switch off your phone and open SP Tools and connect your phone.
Click on format and format your whole phone. ( This wipes whole of the phone including NVram region ).
-Now flash stock ROM through SP Tools and after it completes start up your phone. ( Don’t be surprised. Your IMEI will still be in lost state
only ). Now root your phone.
-After successful rooting now connect your phone to MTK Droid tools and again press ROOT button and grant root access to MTK Droid
tools. Now click on IMEI/NVram tab.
-Now as you see in the image above you can see two boxes IMEI1 and IMEI 2. Now enter your device IMEI numbers manually in those two
boxes.( You can get your IMEI no’s from your phone box ). Now click replace IMEI. Now reboot your phone and you should be definitely able
to get your IMEI restored.
MTK DROID TOOLS LINK : https://www.androidfilehost.com/?fid=24438995911972546
found: http://www.androiddevs.net/restoring-lost-imei-mtk-phone/​

Beautiful @skeleton1911
What a gread job!
Gesendet von meinem Elephone P8000 mit Tapatalk

Thanks for this great work.
And for all the Linux Users out there. SPFlashtool also work perfekt with x86-64 Linux distros.
The most anoying point and greatest drawback is, that with newer Ubuntu based distros like Mint, since 14.04, the builtin modem-manager don't like Mediatek, so you have to blacklist Mediatek in the udev rules.
How this will done, is written in that great tutorial by Miss Montage.
Cheers
The direct link for Tapatalk Users: http://forum.xda-developers.com/general/rooting-roms/tutorial-how-to-setup-spflashtoollinux-t3160802

jknarf said:
Thanks for this great work.
And for all the Linux Users out there. SPFlashtool also work perfekt with x86-64 Linux distros.
The most anoying point and greatest drawback is, that with newer Ubuntu based distros like Mint, since 14.04, the builtin modem-manager don't like Mediatek, so you have to blacklist Mediataek in the udev rules.
How this will done, is written in that great tutorial by Miss Montage.
Cheers
The direct link for Tapatalk Users: http://forum.xda-developers.com/general/rooting-roms/tutorial-how-to-setup-spflashtoollinux-t3160802
Click to expand...
Click to collapse
arnicika said:
Beautiful @skeleton1911
What a gread job!
Gesendet von meinem Elephone P8000 mit Tapatalk
Click to expand...
Click to collapse
thank you very much

This should be pinned!

BlueFlame4 said:
This should be pinned!
Click to expand...
Click to collapse
Already done
Gesendet von meinem Elephone P8000 mit Tapatalk

A German Translation for #1 and #2 is available there: http://www.android-hilfe.de/thema/a...n-und-anwenden-unter-windows-8-8-1-10.759025/

skeleton1911 said:
Lost IMEI Restore
RESTORING IMEI :
-Now when you lose IMEI first try this method. Now take the MPDB_001 file which you took backup at the first step and navigate through
Root explorer to this location ->ROOT->DATA->NVRAM->MD->NVRAM->NVD_IMEI.
[...]​
Click to expand...
Click to collapse
Please note neither the name of the IMEI file nor its position seem to be constant, but may vary from one Stock ROM version to another.
In my case (Stock Rom version 20151203) it took me some time to find a file named "MP0B_001" within the following location:
/nvdata/md/NVRAM/NVD_IMEI
Maybe the easiest way to find the IMEI file is to search for the keyword "NVD_IMEI" within some root file manager as this does not seem to change.

@skeleton1911 I'm having problems with MTK DROID TOOLS, it won't detect my elephone p8000.
I was wondering can you help me with this?

Rav3r1 said:
@skeleton1911 I'm having problems with MTK DROID TOOLS, it won't detect my elephone p8000.
I was wondering can you help me with this?
Click to expand...
Click to collapse
you want to restore your imei?
do this: it just takes a minute
You can solve your imei problem with this "MTK Engineering Mode" from playstore.
You open the app and go to: MTK Settings, Connectivity, CDS Information, Radio Information, Phone 1.
Here you have at the top "AT+". here you complete to >>AT+EGMR=1,7,"123456789012345"<<, of course with your imei, which ist standing on the akku-cover.
Then, very important: You have to put in a space after "AT+", so it looks like >>AT+ EGMR=1,7,"123456789012345"<<
Click "SEND AT COMMAND". Thats it.
For the second imei do the same with >>AT+ EGMR=1,10,"123456789012345"<<

In Lost IMEI Restore part of tutorial MtkDroidTools v2.5.3.zip link to infected file. PLEASE REMOVE or change to https://androiddatahost.com/cj8vrp
SHA256: 40fe0934c24b17bc49e9b96c24c873fc5c4e0744ee31c8c5193c50168ee43839
File name: MtkDroidTools v2.5.3.zip
Detection ratio: 32 / 52
Analysis date: 2016-12-15 22:42:21 UTC ( 2 days, 1 hour ago )
virustotal.com/en/file/40fe0934c24b17bc49e9b96c24c873fc5c4e0744ee31c8c5193c50168ee43839/analysis/

@skeleton1911
I believe that first post need a big refresh.
The new All-In-One Mediatek driver don't need to disable driver signing. and contain both USB ADB and USB preloader driver for Mediatek chips
For the Flashtool version (Windows/Linux) there is a specific thread where you can redirect all user to get latest version of Flashtool program.

[ROM][SHT-AL09][Fenris_SHT-AL09]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Fenris Features
Built in current MicroG
Built in Magisk
Built in BusyBox
Built in GNU Utils compiled for android ( bash etc )
Radically debloated
Built for Lucky Patcher ( lvm already patched and modded playstore in place )
Working Desktop Mode ( PC mode ), Yes you read that right
320 DPI and working camera UI etc.
Better sized Launcher icons.
Shipped as a old school zip so fully customisable by anyone with winrar
Bugs
Wallpapers etc missing ( belongs to an apk i deleted and cant be bothered to track it down ) fixed in beta 2
Standard filemanager is replaced by CM native file manager ( dont want the big H knowing whats on your drive ) so some share functions may not be available
but SMB over the network is fine and thats all im interested in.
Both the TWRP 's are flaky, this version https://forum.xda-developers.com/honor-view-10/development/recovery-twrp-3-2-1-0-t3769917 has just refused to boot on me twice despite a decrypted data partition. But thats not down to Fenris in any way. The second twrp ( view 10 ) is no longer possible. It requires formating /data and by doing that wipes all the themes/wallpapers and screws the theming engine so i am having to stick with the first TWRP.
Unfortunately it BARELY works, just good enough to flash Fenris and associated zip kind of correctly.
Because of a crap TWRP Magisk needs to be setup on first use and download the manager, ie internet needed. It also can not update its zip so that has to be flashed by hand
Battery.... Tablet manager had to go, it deliberately interferes with LP in-app spoofing, but it also provides battery statistics and possibly with it missing, battery life could be worse than stock
( memory handling could also be compromised ). Its a damn hard thing to check since i have never run the tab stock. Tablet manager is back, it controls the recents screen which is broken without one of tablet managers services. Writing a startup script to disable some TM services, but at moment i use MyAndroidTools to do same
Maybe more, this is a beta.
Dev Info.
Huawei have done a good job with their Andfroid shell, its very memory aware and frugal ( unlike samsung and HTC ), its a very good base for Fenris
I would have kept a lot more native apk's but then there are some security concerns so anything with a free line out had to go ( except HwShare, use at your own risk )
If there is demand i will release a total stock zip so peeps can mix-match and roll their own.
Information
Based on MediaPad M5 8.4 SHT-AL09 hw eu Schubert-AL09A 8.0.0.196(C432) Firmware 8.0.0 r1 EMUI8.0 05014XYF.
the link for this firmware https://androidhost.ru/tuA
You must be on this firmware to grantee Fenris operating correctly ( currently Fenris does not ship the vendor or kernel due to issues with the TWRP available being flaky )
, fenris may work on other firmware ( Android O ) but this is for you to try.
I will most prob keep Fenris SHT-AL09 updated as i find stuff i like/do not like, but i AM NOT a Dev, i only get my hands dirty when i need to, so as far as support goes, dont expect much and you will not be disappointed.
My tested method of getting fenris on your SHT-AL09
......download Fenris from here https://mega.nz/#!BKpX2YpT!DhotPKAkJvASYQUPeUlNz3MrZanmFNCxmm6tcd4qcE4
......download Huawei MediaPad M5 8.4 SHT-AL09 hw eu Schubert-AL09A 8.0.0.196(C432) Firmware 8.0.0 r1 EMUI8.0 05014XYF from here https://androidhost.ru/6n0
......downgrade using the dload method
......Get a bootloader unlock code using DC unlocker method ( keep the bootloader unlock code, you will friggin need it )
......Unlock bootloader using Fastboot Unlock Method
......download MediaPad M5 8.4 SHT-AL09 hw eu Schubert-AL09A 8.0.0.196(C432) Firmware 8.0.0 r1 EMUI8.0 05014XYF. from here https://androidhost.ru/tuA
......Upgrade using the Dload method
......Unlock bootloader using Fastboot Unlock Method ( dont worry the code is the same )
......Go into you new 196 system and Activate ADB and OEM-Unlock
......Flash this TWRP https://forum.xda-developers.com/mediapad-m5/development/recovery-twrp-3-2-2-1-t3813825 using TWRP fastboot method
......DO NOT LET IT BOOT INTO SYSTEM, BOOT INTO TWRP INSTEAD
......Have a OTG USB adapter ( you can also use the sd card but that is a pain ) and Stick ready , copy all the files your going to need in the further steps onto it
......Hook up the stick and Flash Disable_Dm-Verity_ForceEncrypt_Quota_05.21.2019.zip from here https://zackptg5.com/android.php#disverfe
......Also Kernel-Sepolicy-Patcher.zip from here also https://zackptg5.com/android.php#disverfe
......THen finally flash Fenris
......Boot ito Fenris
TWRP fastboot method
1.... Make sure you have latest HW adb drivers installed ( check by getting an adb shell to work )
2.... Download latest Android platform tools https://developer.android.com/studio/releases/platform-tools
3)... Decompress etc, get to fastboot dir, open a CMD there
4)... Copy your TWRP image to same dir
5).... Boot into Download mode ( vol down while plufgging USB into computer with drivers set up )
5).... fastboot.exe flash recovery_ramdisk xxxxxxxxxx.img
6).... Get frigin ready to pull the usb and hold power + vol UP ( to reboot int TWRP you just flashed ) DO NOT LET IT BOOT INTO SYSTEM
7).... fastboot.exe reboot
8).... Pull USB, Boot into TWRP
9).... TWRP reboot Menue to shutdown
Dload Method
1.... extract the archive
2.... copy dload folder to root of a fat32 formated sd card
3.... boot up, enable dev options
4.... In dev options enable OEM-unlock ( you will need to be on internet from setup onwards ) unlock and adb
5.... In phone dialer dial *#*#2846579#*#*
6..... Get to upgrade from sd card and hit it.
7..... Phone reboots and does the ****
8..... If you have used online Erecovery downgrading may fail but if setting up from new ( unboxing) this will def work
Dc Unlocker Method ( copied from a p20lite thread , but works for m5 identically )
1)First connect your phone to the PC using the original USB cable.
2)When drivers are installed a popup screen would appear to view the "HiSuite" drive. This is a created drive-letter which contains a HiSuite Software downloader. Click to open or use the Windows Explorer to browse to this virtual drive.
3)Install the HiSuite software - this is important to get the correct drivers AND correct COM ports installed on your system. Skipping this step will result in non working DC Unlocker software.
4)When all is done go to the settings in your phone and open: System -> About Phone and tap the Build-number line about 7 to 8 times. Most likely the phone will ask for a PIN to active the developers mode. This is the code you've setup to use your phone. If you're already have a "developers option" you can skip this step.
5)Now click the "back" arrow once and select "Developer options".
6)Tap OEM-Unlock to activate it (confirm if needed), scroll down and tap USB Debugging to turn it on.
7)Your phone should ask permission to connect your PC (with some MAC address). Confirm it so the connection is approved. If that doesn't show up disconnect the USB cable and check if the USB debug mode is still active in the "Developer options". Than reconnect the cable to your PC.
ready to use the DC-Unlocker software to get our unlock code:
8)First you need some credits and you can buy the using this link: https://www.dc-unlocker.com/buy
9)Just fill in the the fields User-name, E-mail and Credits. Leave the "New user account" option selected if you are a new user.
10)For the Credits you only need 4 of them. I, initially, bought 5 so I still have one left
11)You'll receive a confirmation e-mail with a username and password. These are needed a bit later.
12)Extract the DC-Unlocker client to a fold and start it by clicking dc-unlocker2client.exe using the Windows Explorer (or any other file manager). To be sure you can also right-click the file and start the program using Administrator credentials.
13)Select in the right portion of the program the tab "Server" and enter the username and password you've received by mail. Check the "Remeber" box and click "Check login" to verify your account.
14)Click in the left portion of the program the dropdown list below "Select manufacturer" and choose "Huawei phones".
15)Leave the droplist "Select model" selected at "Auto detect (recommended)".
16)Grab your phone and open your dialer to type this code: *#*#2846579#*#* - this will get you into the service menu of the phone.
17)Tap 1. Background Settings -> USB Port Settings and select Manufacture Mode and than tap Close.
18)Put the phone done and let your PC install the newly found drivers.
19)If that's done click the Magnifying glass in the DC-Unlocker client software.
20)If all is connected correctly your phone is detected and a message in the white part of the program will tell you so. Also the "Select Model" field should display Huawei HiSilicon Kirin Android if the detection is succesfull.
**ready to read the unlock code! Yeah!
21)Click in the right portion of the DC-Unlocker client on the tab Unlocking.
22)Several buttons are visible but just click Unlock which could take a few moments before something is displayed in the white area at the bottom of the program window.
23)The unlock code can be copied and pasted - so please do copy the number to a text file and store it savely on your computer or in your cloud.
Fastboot Unlock Method
1).... Make sure you have latest HW adb drivers installed ( check by getting an adb shell to work )
2).... Download latest Android platform tools https://developer.android.com/studio/releases/platform-tools
3)... Decompress etc, get to fastboot dir, open a CMD there
5).... Boot into Download mode ( vol down while plugging USB into computer with drivers set up )
6).... fastboot oem unlock xxxxxxxxxxxxxx

Glad to read that the development of our Schubert isn't dead

massima said:
Glad to read that the development of our Schubert isn't dead
Click to expand...
Click to collapse
Not sure about that Seems barren in terms of real development. But in this case stock is a very good base, and in terms of memory usage very competitive with LOS, so in this case do not miss real open source code for the device.
The TWRP for our device is not great, and thats something i will get hands dirty fixing.

Any chance you could upload few pictures to show us how pc mode looks on smaller device, and will ever update your rom to 9.0?
Thanks in advance.

xabat said:
Any chance you could upload few pictures to show us how pc mode looks on smaller device, and will ever update your rom to 9.0?
Thanks in advance.
Click to expand...
Click to collapse
Yes sure will get a few screenshots out.
Will update to 9 when the dev community ( LP, Xposed, and all the other projects ) catches up.
At the moment we are prob a year away. ( Xposed barely works on EMUI 8 ).
Fenris is not your normal developers rom, its not about the latest version or untested beta code. Its about providing a stable platform for "alternative" open source code projects focused on Penetration testing, and pushing the boundaries.

any chance you could tell us how to activate desktop mode on stock rom ?

Are you rooted with the TWRP mentioned in the post ?
If not not much point in going further, plus its not an easy job mate, you good at messing around with your internal files ? Permissions and selinux contexts ? Edify script ? If so then you prob could do it. Otherwise best not even start.

vecna said:
Are you rooted with the TWRP mentioned in the post ?
If not not much point in going further, plus its not an easy job mate, you good at messing around with your internal files ? Permissions and selinux contexts ? Edify script ? If so then you prob could do it. Otherwise best not even start.
Click to expand...
Click to collapse
Yes, I unlocked bootloader months ago and I have root.

xabat said:
Yes, I unlocked bootloader months ago and I have root.
Click to expand...
Click to collapse
And twrp ? Cos your going to have to write an edify script to flash everything.

vecna said:
And twrp ? Cos your going to have to write an edify script to flash everything.
Click to expand...
Click to collapse
No I don't have twrp at the moment. I can't find working recovery for emui 9.
I wanted to see if desktop mode will work on android 9

xabat said:
No I don't have twrp at the moment. I can't find working recovery for emui 9.
I wanted to see if desktop mode will work on android 9
Click to expand...
Click to collapse
Well on EMUI 9 not happening, and not happening without TWRP anyway.
So why exactly are you on EMUI 9

I guess there is no external monitor support as I dident read that anywhere.
Is it a hardware limitation?

Well, this ROM is clean and awsome, i have the 10 inch tablet but i envy those who have the Schubert model as they can try this ROM??

Fenris is now at Beta 4, front post updated.

any development for this rom?

How To Guide Flash TCL Firmware TPST Tool / Includes links to Official FW

(I can not take credit for this, copied from their site- however) see links for official flashing tools & directions and here are complete firmware links to official firmware:​
FIRMWARE
Ottawa 3CI1.tctbin (9.1G) - (Android 11)
https://drive.google.com/uc?id=1J3zggbcb2ZLLsYEE9ktK6dEM4DyOVHEd&export=download
5E2Y_DPP5.tctbin (7.5G) - (Android 12)
Google Drive - Virus scan warning
drive.google.com
TOOLS
Android_USB_Driver_Q_9.16.1.28_2016_04_01_All_in_One_Setup.rar
T810_Model_DLL_Setup_v0.0.3.msi
TPST_Frame setup V1.8.0.msi
_______________________________________________________________​​TPST Tool User Guide​Catalog
TPST Tool User Guide 1
1. Introduction 1
1.1 Purpose 1
1.2 Intro 1
2. Install 1
2.1 Install USB Driver 1
2.2 Install TPST 4
2.3 Install model 6
3. Steps to Flash Software 8
3.1 Run TPST 8
3.2 Refurbish the software ( Refurbish function will erase user data) 9
1. Introduction
1.1 Purpose​This user guide describes the operations of upgrade functions about TPST.
Please trust all warnings from antivirus software if any.
1.2 Intro​TPST is applied to equipment management system on PC application terminal, and take charge of connecting mobile phone terminal equipment to do software updating.
2. Install​Before upgrade, please prepare the following tools
Android_USB_Driver_Q_9.16.1.28_2016_04_01_All_in_One_Setup.rar
T810_Model_DLL_Setup_v0.0.3.msi
TPST_Frame setup V1.8.0.msi
2.1 Install USB Driver​(1) Download, Unzip and open the Driver : Android_USB_Driver_Q_9.16.1.28_2016_04_01_All_in_One_Setup.rar: https://drive.google.com/file/d/1BvhOiiKwJf5MXHyHl2YIK5jvHXRMvpjb/view?usp=sharing
(2) Operates as follows:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.2 Install TPST​(1) download the TPST_Frame setup V1.8.0.msi to local:
https://drive.google.com/file/d/1NQD-ByfddHMbzYJrwXGBkXCR7FP2yWyd/view?usp=sharing
(2 )Open the TPST_Frame setup V1.8. 0.msi and operates as follows:
(3) All the installation files and logs are record in the path C:\Program Files (x86)\TCT\TPST\Tool.
2.3 Install model​(1) Open the T810_Model_DLL_Setup_v0.0.3.msi:
https://drive.google.com/file/d/1fzjdoDJGKxtM2kTrEl3WPFj9tSgexGS3/view?usp=sharing
(2 )Operates as follows:
(3) All the T810 model information are stored in the path C:\Program Files (x86)\TCT\TPST\Model\T810
3. Steps to Flash Software​3.1 Run TPST​(1) Click windows “Start” button to enter start menu, and then find TPST shortcut as below figure, or open the TPST in desktop screen.
(2) Click “Load ” menu and select the mode T810 to load it, ex Figure1
Figure 1
Refurbish the software ( Refurbish function will erase user data)​
Power off device. Switch to Download mode(made Device in power off status, long press Vol + and Vol – at same time and plug USB cable, when See warning screen, loose Vol- to switch to download mode) Tool will detect the COM port.
Click “Refurbish” button in the TPST tool to enter the feature. Then click “Browse” button, it will pop up a window, you can select a SW file to download.
In the “Select Software image file” screen, you can view catalog items on the left ,click the file you want to download, then click “OK” button, the file will be selected.
Select “XML LOG”, it can print a log file when you flash the software. Click “Browse” You can select a new xml log directory to save it.
(5)Click “Start Refurbish” button
(6)Wait a few minutes, you can see as follows, Download success.
Note：TPST to support download SW to multiple devices at same time， Suggested connect less than 7 devices to download at same time.

Hi, i ve flashed android 12 beta 3 but now i can't return back to android 11. I ve follow the guide same procedure as per android 12 but After flashing stabile android 11 i can enter only in fastboot .

how did you guys even get android 12? it says my phone is corrupted

yeah unfortunately my phone is now bricked. followed the instructions that tcl provided to upgrade to android 12 and now it says the phone is corrupted

dieudeglace said:
yeah unfortunately my phone is now bricked. followed the instructions that tcl provided to upgrade to android 12 and now it says the phone is corrupted
Click to expand...
Click to collapse
Did you try the beta 3?

Whatever the beta was on their website, if you have some sort of other version I'll take it.

dieudeglace said:
Whatever the beta was on their website, if you have some sort of other version I'll take it.
Click to expand...
Click to collapse
404
www.tcl.com

Jamesblondca said:
404
www.tcl.com
Click to expand...
Click to collapse
Pay attention to the CU number, thats how I got mine stuck on beta 3
but at least it works, jsut dont know if it will ever get upgraded.

I still tried it and I still cannot load into anything. I think I forgot to enable usb debug tho as fastboot fails to do anything, even something as simple as switching slots

o.class.jav said:
(I can not take credit for this, copied from their site- however) see links for official flashing tools & directions and here are complete firmware links to official firmware:​
FIRMWARE
Ottawa 3CI1.tctbin (9.1G) - (Android 11)
https://drive.google.com/uc?id=1J3zggbcb2ZLLsYEE9ktK6dEM4DyOVHEd&export=download
5E2Y_DPP5.tctbin (7.5G) - (Android 12)
Google Drive - Virus scan warning
drive.google.com
TOOLS
Android_USB_Driver_Q_9.16.1.28_2016_04_01_All_in_One_Setup.rar
T810_Model_DLL_Setup_v0.0.3.msi
TPST_Frame setup V1.8.0.msi
_______________________________________________________________​​TPST Tool User Guide​Catalog
TPST Tool User Guide 1
1. Introduction 1
1.1 Purpose 1
1.2 Intro 1
2. Install 1
2.1 Install USB Driver 1
2.2 Install TPST 4
2.3 Install model 6
3. Steps to Flash Software 8
3.1 Run TPST 8
3.2 Refurbish the software ( Refurbish function will erase user data) 9
1. Introduction
1.1 Purpose​This user guide describes the operations of upgrade functions about TPST.
Please trust all warnings from antivirus software if any.
1.2 Intro​TPST is applied to equipment management system on PC application terminal, and take charge of connecting mobile phone terminal equipment to do software updating.
2. Install​Before upgrade, please prepare the following tools
Android_USB_Driver_Q_9.16.1.28_2016_04_01_All_in_One_Setup.rar
T810_Model_DLL_Setup_v0.0.3.msi
TPST_Frame setup V1.8.0.msi
2.1 Install USB Driver​(1) Download, Unzip and open the Driver : Android_USB_Driver_Q_9.16.1.28_2016_04_01_All_in_One_Setup.rar: https://drive.google.com/file/d/1BvhOiiKwJf5MXHyHl2YIK5jvHXRMvpjb/view?usp=sharing
(2) Operates as follows:
2.2 Install TPST​(1) download the TPST_Frame setup V1.8.0.msi to local:
https://drive.google.com/file/d/1NQD-ByfddHMbzYJrwXGBkXCR7FP2yWyd/view?usp=sharing
(2 )Open the TPST_Frame setup V1.8. 0.msi and operates as follows:
(3) All the installation files and logs are record in the path C:\Program Files (x86)\TCT\TPST\Tool.
2.3 Install model​(1) Open the T810_Model_DLL_Setup_v0.0.3.msi:
https://drive.google.com/file/d/1fzjdoDJGKxtM2kTrEl3WPFj9tSgexGS3/view?usp=sharing
(2 )Operates as follows:
(3) All the T810 model information are stored in the path C:\Program Files (x86)\TCT\TPST\Model\T810
3. Steps to Flash Software​3.1 Run TPST​(1) Click windows “Start” button to enter start menu, and then find TPST shortcut as below figure, or open the TPST in desktop screen.
(2) Click “Load ” menu and select the mode T810 to load it, ex Figure1
Figure 1
Refurbish the software ( Refurbish function will erase user data)​
Power off device. Switch to Download mode(made Device in power off status, long press Vol + and Vol – at same time and plug USB cable, when See warning screen, loose Vol- to switch to download mode) Tool will detect the COM port.
Click “Refurbish” button in the TPST tool to enter the feature. Then click “Browse” button, it will pop up a window, you can select a SW file to download.
In the “Select Software image file” screen, you can view catalog items on the left ,click the file you want to download, then click “OK” button, the file will be selected.
Select “XML LOG”, it can print a log file when you flash the software. Click “Browse” You can select a new xml log directory to save it.
(5)Click “Start Refurbish” button
(6)Wait a few minutes, you can see as follows, Download success.
Note：TPST to support download SW to multiple devices at same time， Suggested connect less than 7 devices to download at same time.
Click to expand...
Click to collapse
Why doesn't it show me a log line in my tpst ???

line two create xlm log is not seen on my pc why can it happen??

I know this is the TCL 20 section, but I see the screen shot has T799H... do you happen to actually have the T799H driver MSI?

Hello, I can't find the brush bag of t810h

你好，我在官网找不到t810h的刷包，然后T810刷包转砖

dieudeglace said:
I still tried it and I still cannot load into anything. I think I forgot to enable usb debug tho as fastboot fails to do anything, even something as simple as switching slots
Click to expand...
Click to collapse
Does it say so?

xer. said:
Hello, I can't find the brush bag of t810h
Click to expand...
Click to collapse
bro not brush bag but rom，it means刷书包hhh

MU.Eu said:
Does it say so?
Click to expand...
Click to collapse

MU.Eu said:
Does it say so?
Click to expand...
Click to collapse
Are you sure you had the correct model phone? Or it could have been a corrupted download. DM me your email address and ill share my sharepoint files with you.

o.class.jav said:
Are you sure you had the correct model phone? Or it could have been a corrupted download. DM me your email address and ill share my sharepoint files with you.
Click to expand...
Click to collapse
Also- these links still work...
Ottawa 3CI1.tctbin (9.1G) - (Android 11)
https://drive.google.com/uc?id=1J3zggbcb2ZLLsYEE9ktK6dEM4DyOVHEd&export=download
5E2Y_DPP5.tctbin (7.5G) - (Android 12)

o.class.jav said:
Also- these links still work...
Ottawa 3CI1.tctbin (9.1G) - (Android 11)
https://drive.google.com/uc?id=1J3zggbcb2ZLLsYEE9ktK6dEM4DyOVHEd&export=download
5E2Y_DPP5.tctbin (7.5G) - (Android 12)
Click to expand...
Click to collapse
Also, all of the tool downloads work still in this post. Download the tools- use the Android 12 ROM and follow the instructions. You can restore your phone.

How To Guide Flash stock ROM or downgrade ColorOS 12 on OPPO Reno6 5g(CPH2251-MT6877 chip) by using free MTK client GitHub tool.

Hey Guys,
After color OS 12 (and android 12) upgrade on OPPO reno6 5G device, users were facing issues like third part apps not working(Intune company portal work profile, Ritam news app etc),battery draing very rapidly,always on display not working and many more.
So, here I have come up with a method to flash stock ROM or downgrade color OS 12 and switch back to Color OS 11.3 which have android 11. So without wasting time lets start
Note: Data will be erased in this method so please take backup of you data on phone.
This has been tested on Indian version, I am not sure if it will work for other countries.
I strongly recommend to take full firmware backup using method below before proceeding
Backup full firmware(ROM) of any MediaTek device using MTK client| Oppo reno6 5G | MT6877
Hello Guys, Many times we encounter a situation where we need to do some software update, flash custom ROM, install stock ROM etc, so it is advisable to take full firmware/ROM backup of your device. If required then you can flash this backup to...
forum.xda-developers.com
Step1: Pre-requisite -Installing required drivers and setup
From links below download and install drivers and setup.
Install mediaTek driver.
Install python (during installation of python please select "install for all user" from customization and tick add path to system variable).
install usbdk.
download extarct Mtk client tool.
go to folder where you extract mtk client
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
open cmd here and run below command
cd mtkclient
pip3 install -r requirements.txt
In default setting it takes 2 hour to flash but after change it takes 13 min only. So, If you want to increase flashing speed then open mtk_daxflash.py file from library folder, search "dsize = min(length, 0x200)" and replace it with "dsize = min(length, 0x2004)" , save and close the file.
You need to close the command prompt and reopoen it in order to take effect of change.
Reference(https://github.com/bkerler/mtkclient/issues/271)
New Qcom Mtk Driver V3.0.5.1.rar | by TUSER HP for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Download Python
The official home of the Python Programming Language
www.python.org
GitHub - bkerler/mtkclient: MTK reverse engineering and flash tool
MTK reverse engineering and flash tool. Contribute to bkerler/mtkclient development by creating an account on GitHub.
github.com
Releases · daynix/UsbDk
Usb Drivers Development Kit for Windows. Contribute to daynix/UsbDk development by creating an account on GitHub.
github.com
Step2: Download and extract the stock firmware
CPH2251_A.13_ColorOS11.3_Android11_Latest.rar
drive.google.com
Step3: Flash the firmware
on cmd type below command to flash the firmware
python mtk wl "stock ROM location full path"
it will wait for devices.. Power off the phone, wait 10 sec then press vol up + vol down together and then plug the usb cable.
Once device detected , it will display devices information and start flashing
While flashing it will dump the preloader, this file is very important so, please keep this file safely. this file may require in future.
Step4: Boot the phone
Once flashing completed, press vol up + power button together for 30 sec. Wait for device to boot.
Step5: Flashing the preloader.bin (only if required)
In case, even after flashing completed successfully but some time device does not boot, only black screen, no charging sign either then don't panic, device has entered into emergency download mode, if you face the same then it's time to flash preloader.bin file. Follow below steps
1) download SP flash tool specific version v5.2148. (https://androidmtk.com/smart-phone-flash-tool)
2) download attached preloader.bin, scatter file and auth file from link below and place all these files at same folder.
MT6877_flashing_preloader.zip
drive.google.com
3) open sp flash tool, select download agent files from mtk folder as shown on image and load scater file and auth files respectively.
4) In cmd run command "python mtk payload". Now press and hold vol+ vol- or all the buttons together, it should show payload sent successfully.
5) Now in sp flash tool click on Download button, it should flash the preloader successfully.
6) once preloader is flash successfully you can turn on the phone by pressing vol+ and power button together for 20 sec. If attached preloader does't flash then you can try flashing your device backup preloader.bin created/shown on step3.
So by this way we flashed stock firmware on oppo reno6 5G.
Tips: If due to some reason flashing did not completed successfully then please press vol up and power button together for 30-40 sec to boot the phone (exit the brom mode).
Disclaimer: I have tested this method on my phone, it's 100% working but I will not responsible if damage any damage happens to your device while doing this. So do it at your own risk.

It's work sir
Many thanks
Nand kumar said:
Step1: Pre-requisite -Installing required drivers and setup
Install MediaTek drivers, in windows 10 you need to disable driver signature enforcement.
Install paython, usbdk.
download extarct Mtk client tool.
go to folder where you extract mtk client
open cmd here and run below command
cd mtkclient
pip3 install -r requirements.txt
Click to expand...
Click to collapse
In this step the command should be
pip install -r requirements.txt
it's will work

killian07 said:
It's work sir
Many thanks
In this step the command should be
pip install -r requirements.txt
it's will work
Click to expand...
Click to collapse
Did you also took firmware back using my method or you just flashed the ROM?

Thanks for your work

You are welcome sir.

Edit : Comment removed it can create confusion

Edit : Comment removed it can create confusion

Thank you

Edit : Comment removed it can create confusion

Edit : Comment removed it can create confusion

Thank you sir

Edit : Comment removed it can create confusion

Thank you

Edit : Comment removed it can create confusion

Edit : Comment removed it can create confusion

Nand kumar said:
Hey Guys,
After color OS 12 (and android 12) upgrade on OPPO reno6 5G device, users were facing issues like third part apps not working(Intune company portal work profile, Ritam news app etc),battery draing very rapidly,always on display not working and many more.
So, here I have come up with a method to flash stock ROM or downgrade color OS 12 and switch back to Color OS 11.3 which have android 11. So without wasting time lets start
Note: Data will be erased in this method so please take backup of you data on phone.
I strongly recommend to take full firmware backup using method below before proceeding
Backup full firmware(ROM) of any MediaTek device using MTK client| Oppo reno6 5G | MT6877
Hello Guys, Many times we encounter a situation where we need to do some software update, flash custom ROM, install stock ROM etc, so it is advisable to take full firmware/ROM backup of your device. If required then you can flash this backup to...
forum.xda-developers.com
Step1: Pre-requisite -Installing required drivers and setup
Install MediaTek drivers, in windows 10 you need to disable driver signature enforcement.
Install paython, usbdk.
download extarct Mtk client tool.
go to folder where you extract mtk client
View attachment 5541629
open cmd here and run below command
cd mtkclient
pip3 install -r requirements.txt
Windows+10_MTK+VCOM+USB+Preloader+Drivers.zip | by karimovic44 for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Download Python
The official home of the Python Programming Language
www.python.org
GitHub - bkerler/mtkclient: MTK reverse engineering and flash tool
MTK reverse engineering and flash tool. Contribute to bkerler/mtkclient development by creating an account on GitHub.
github.com
Releases · daynix/UsbDk
Usb Drivers Development Kit for Windows. Contribute to daynix/UsbDk development by creating an account on GitHub.
github.com
Step2: Download and extract the stock firmware
View attachment 5541657
CPH2251_A.13_ColorOS11.3_Android11_Latest.rar
drive.google.com
Step3: Flash the firmware
on cmd type below command to flash the firmware
python mtk wl "stock ROM location full path"
it will wait for devices.. Power off the phone, wait 10 sec then press vol up + vol down together and then plug the usb cable.
Once device detected , it will display devices information and start flashing
View attachment 5541639
View attachment 5541641
View attachment 5541645
While flashing it will dump the preloader, this file is very important so, please keep this file safely. this file may require in future.
View attachment 5541661
Step4: Boot the phone
Once flashing completed, press vol up + power button together for 30 sec. Wait for device to boot.
so by this way we flashed stock firmware on oppo reno6 5G.
Tips: If due to some reason flashing did not completed successfully then please press vol up and power button together for 30-40 sec to boot the phone (exit the brom mode).
Disclaimer: I have tested this method on my phone, it's 100% working but I will not responsible if damage any damage happens to your device while doing this. So do it at your own risk.
Click to expand...
Click to collapse
Thank you sir, it's working.
I followed this method and now I have successfully downgraded my ColorOs 12 to ColorOs 11.3 on my oppo reno6 5g.

How To Guide Backup full firmware(ROM) of any MediaTek device using MTK client| Oppo reno6 5G | MT6877

Hello Guys,
Many times we encounter a situation where we need to do some software update, flash custom ROM, install stock ROM etc, so it is advisable to take full firmware/ROM backup of your device. If required then you can flash this backup to restore your device.
We will use MTK client Github tool for this backup process and using same tool we can flash the backup firmware.
This method has been tested on OPPO Reno6 5G which is powered by MediaTek MT6877 chip. Backup size was approx 12 GB. Using this method you can backup firmware of any other supported MediaTek chip in this tool. In this method I don't backup userdata because this tool backups entire partition size irrespective of actual data stored.
Step1: Pre-requisite -Installing required drivers and doing setup
Install MediaTek driver.
Install python(during installation of python please select "install for all user" from customization and tick add path to system variable).
install usbdk.
download extarct Mtk client tool.
go to folder where you extract mtk client
View attachment 5541629
open cmd here and run below command
cd mtkclient
pip3 install -r requirements.txt
Windows+10_MTK+VCOM+USB+Preloader+Drivers.zip | by karimovic44 for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Download Python
The official home of the Python Programming Language
www.python.org
GitHub - bkerler/mtkclient: MTK reverse engineering and flash tool
MTK reverse engineering and flash tool. Contribute to bkerler/mtkclient development by creating an account on GitHub.
github.com
Releases · daynix/UsbDk
Usb Drivers Development Kit for Windows. Contribute to daynix/UsbDk development by creating an account on GitHub.
github.com
Step2: Create a new folder/directory in your computer to store the backup files.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step3: Run full firmware backup
In cmd run command below, please skip userdata partition only because of very huge size.
python mtk rl --skip userdata "<full path to store the backup files>"
Once all the partitions dumped it will show message "All dumped partitions success"
During backup process it will dump the device preloader, this file is very important so, please keep this file safely. this file may require in future.
Step3: Reboot the phone
Once backup is done, you can restart your phone by pressing vol up and power button together for 30 sec.
Step4: How to Restore (if required)
Backup process might have created approximately 58 files but we do not need to flash all those files.
We only need to flash below files, so create a new folder and copy all these 33 files from original backup to your newly created folder.
audio_dsp.bin
boot.bin
cam_vpu1.bin
cam_vpu2.bin
cam_vpu3.bin
cdt_engineering.bin
dpm_1.bin
dpm_2.bin
dtbo.bin
gpt_backup.bin
gpt_main.bin
gz1.bin
gz2.bin
lk.bin
lk2.bin
logo.bin
mcupm_1.bin
mcupm_2.bin
md1img.bin
oplusreserve2.bin
pi_img.bin
recovery.bin
scp1.bin
scp2.bin
spmfw.bin
sspm_1.bin
sspm_2.bin
super.bin
tee1.bin
tee2.bin
vbmeta.bin
vbmeta_system.bin
vbmeta_vendor.bin
open cmd and type below command
python mtk wl "<full path where 33 files are stored>"
Backup should be restored on same device from which it was taken else device may brick.
Thanks and Regards
Nand,

thanks a lot why only 33 files restored ?

Please please, i have a question. can i use that firmware on oppo reno4 z 5G, has a model CPH2065
if not where i can find one for my device?
please i have oppo reno4 z 5G and model number CPH2065

jason__ said:
Please please, i have a question. can i use that firmware on oppo reno4 z 5G, has a model CPH2065
if not where i can find one for my device?
please i have oppo reno4 z 5G and model number CPH2065
Click to expand...
Click to collapse
No. you can NOT use.

Nand kumar said:
No. you can NOT use.
Click to expand...
Click to collapse
please where can i find fireware for my model. i searched everywhere and i can't find it.

jason__ said:
please where can i find fireware for my model. i searched everywhere and i can't find it.
Click to expand...
Click to collapse
Try this. I think You need to buy unlock tool license to flash the firmware. Search unlock tool.net in google.
https://oppostockrom.com/oppo-reno-4-z-5g-cph2065

Nand kumar said:
Try this. I think You need to buy unlock tool license to flash the firmware. Search unlock tool.net in google.
https://oppostockrom.com/oppo-reno-4-z-5g-cph2065
Click to expand...
Click to collapse
is it country neutral? what does that PU stand for?
i appreciate your time so much for trying to help me out.

jason__ said:
is it country neutral? what does that PU stand for?
i appreciate your time so much for trying to help me out.
Click to expand...
Click to collapse
Firmware size is 8 gb so I think it support all countries. You will get drop down list to select country while flashing. Download and extract and see if it has ofp file

okay sir, i'll get back to you when it's downloaded.

Nand kumar said:
Firmware size is 8 gb so I think it support all countries. You will get drop down list to select country while flashing. Download and extract and see if it has ofp file
Click to expand...
Click to collapse
Sorry for being late sir.
Yeah it has that file. but i installed realme flash, and some drivers were available in the package. then when i try to fastboot my phone (down volume key + power key) i find that my phone is not accessible.
i download every possible driver that i could find online and nothing.
also, when i try to fastboot my phone, i enter recovery mode. are they the same?
Please help me.

jason__ said:
Sorry for being late sir.
Yeah it has that file. but i installed realme flash, and some drivers were available in the package. then when i try to fastboot my phone (down volume key + power key) i find that my phone is not accessible.
i download every possible driver that i could find online and nothing.
also, when i try to fastboot my phone, i enter recovery mode. are they the same?
Please help me.
Click to expand...
Click to collapse
i think you need to enter EDL mode aka download mode and not fastboot for that tool...

Nand kumar said:
Hello Guys,
Many times we encounter a situation where we need to do some software update, flash custom ROM, install stock ROM etc, so it is advisable to take full firmware/ROM backup of your device. If required then you can flash this backup to restore your device.
We will use MTK client Github tool for this backup process and using same tool we can flash the backup firmware.
This method has been tested on OPPO Reno6 5G which is powered by MediaTek MT6877 chip. Backup size was approx 12 GB. Using this method you can backup firmware of any other supported MediaTek chip in this tool. In this method I don't backup userdata because this tool backups entire partition size irrespective of actual data stored.
Step1: Pre-requisite -Installing required drivers and doing setup
Install MediaTek driver.
Install python(during installation of python please select "install for all user" from customization and tick add path to system variable).
install usbdk.
download extarct Mtk client tool.
go to folder where you extract mtk client
View attachment 5541629
open cmd here and run below command
cd mtkclient
pip3 install -r requirements.txt
Windows+10_MTK+VCOM+USB+Preloader+Drivers.zip | by karimovic44 for Generic Device/Other
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
Download Python
The official home of the Python Programming Language
www.python.org
GitHub - bkerler/mtkclient: MTK reverse engineering and flash tool
MTK reverse engineering and flash tool. Contribute to bkerler/mtkclient development by creating an account on GitHub.
github.com
Releases · daynix/UsbDk
Usb Drivers Development Kit for Windows. Contribute to daynix/UsbDk development by creating an account on GitHub.
github.com
Step2: Create a new folder/directory in your computer to store the backup files.
View attachment 5543511
Step3: Run full firmware backup
In cmd run command below, please skip userdata partition only because of very huge size.
python mtk rl --skip userdata "<full path to store the backup files>"
View attachment 5543497
View attachment 5543501
Once all the partitions dumped it will show message "All dumped partitions success"
During backup process it will dump the device preloader, this file is very important so, please keep this file safely. this file may require in future.
Step3: Reboot the phone
Once backup is done, you can restart your phone by pressing vol up and power button together for 30 sec.
Step4: How to Restore (if required)
Backup process might have created approximately 58 files but we do not need to flash all those files.
We only need to flash below files, so create a new folder and copy all these 33 files from original backup to your newly created folder.
audio_dsp.bin
boot.bin
cam_vpu1.bin
cam_vpu2.bin
cam_vpu3.bin
cdt_engineering.bin
dpm_1.bin
dpm_2.bin
dtbo.bin
gpt_backup.bin
gpt_main.bin
gz1.bin
gz2.bin
lk.bin
lk2.bin
logo.bin
mcupm_1.bin
mcupm_2.bin
md1img.bin
oplusreserve2.bin
pi_img.bin
recovery.bin
scp1.bin
scp2.bin
spmfw.bin
sspm_1.bin
sspm_2.bin
super.bin
tee1.bin
tee2.bin
vbmeta.bin
vbmeta_system.bin
vbmeta_vendor.bin
open cmd and type below command
python mtk wl "<full path where 33 files are stored>"
Backup should be restored on same device from which it was taken else device may brick.
Thanks and Regards
Nand,
Click to expand...
Click to collapse
Can I ask how much time will it take to backup without userdata

hi i want this backup

idk why but my hanshake keeps failing.
i installed drivers as mentioned,but no coms showing up on device manager.
i think that when we install all drivers it usually shows like mtk device in devmgr,but it doesnt.
also i cant go to preloader mode easily.when i switch off phone and connect usb,it automatically turns back on.
why does it keep failing please help.are there any other methods for backup.like using sp flashtool.
pls help someone.

mohdsha said:
View attachment 5695877
idk why but my hanshake keeps failing.
i installed drivers as mentioned,but no coms showing up on device manager.
View attachment 5695881
i think that when we install all drivers it usually shows like mtk device in devmgr,but it doesnt.
also i cant go to preloader mode easily.when i switch off phone and connect usb,it automatically turns back on.
why does it keep failing please help.are there any other methods for backup.like using sp flashtool.
pls help someone.
Click to expand...
Click to collapse
ihave the same issue, did you find any solution to going into preloading?

mamomia said:
ihave the same issue, did you find any solution to going into preloading?
Click to expand...
Click to collapse
no bro.. im still trying .. i use a 5a cable..maybe we need og cable to coonect.idk i will try some troubleshooting.if successfull ,i will let you know.

Nand kumar said:
python mtk wl "<full path where 33 files are stored>"
Backup should be restored on same device from which it was taken else device may brick.
Click to expand...
Click to collapse
can a backup of the 33 files be applied to a new device which is exactly the same model without bricking it? (ie. a rom transfer to create a clone onto second device)

Hello and thank you so much for your guide. I was able to get everything setup for the most part, but I am held up by two problems, I'm sure they are simple but I would appreciate any help if anyone knows the answer.
Problem number one, is the correct vcom driver, the preloader one as shown in this
Spoiler: PIC
Or should I be using another?
My other question is, what is the correct terminology for what we are trying to achieve by getting the phone to register in the MTK client? Like, are we trying to get it to "boot into preloader mode"?
Spoiler: PIC
I am unable to get my phone to register or show in device manager or with the mtk client, to get it to post into the "preloader" mode. Since I do not know how to adequately describe what I am trying to do, I am having a hard time even searching on google for more help. If anyone can give me any help in grammer google search or direct knowledge on this simple part i would appreciate it

The answer to the driver question is to install all of them not just one. This discussion on reddit has some comments which go into more discussion of the bootrom protection and other github repos to achieve this. So to answer my main question about the phone not being detected by the MTK client it seems there is one more step for myself and other folks in this condition.
Spoiler: show link
https://www.reddit.com/r/androidroot/comments/wj6zrv
This guide explains how the MTK devices load the preloader. It is only up for 1 second apparently
Spoiler: show link
https://www.reddit.com/r/Smartphoneforensics/comments/xwd562

thanks a lot!!!! i have installed easily mtk client on garuda linux, and works very well (used for restore stook boot and solve a bootloop that seems impossible to solve). this guide is what i'm searching from some week. a way to do a full backup of my phone, userdata included
my suggestion for install mtkclient and other android tool is switch to garuda linux. if you try linux, you will never use windows again. garuda app manager with chaotic-aur have all software that you need. try to believe