Hello everyone! I hope and everyone is well in this quarantine, the topic of this post is the following. I have a Redmi Note 8 PRO the Chinese version to be exact and a few days ago I was on Android 10 global version with the bootloader unlocked and so far without problems, it happens that due to ignorance I use the tool of my flash to block the bootloader and go down to Android 9 global at the same time when after my cell phone was brick is that I informed myself of the issue that I could not block it since it is the Chinese version and now I do not know how to recover it because when I try to use my flash to flash an official ROM from China it puts a error "crlist error" something I do not understand, and the biggest problem is that I have the locked bootloader and I cannot unlock it because when I was going to flash the device had removed my Xiaomi account. Please if someone knows a solution for my case I would be eternally grateful to you.
i was looking foward to buy this phone but i needed to know if is running an 64 bits version of Android out of the box. I cannot find this information anywere so please if anyone of you can confirm it or point me to some place i can found out would be much appreciated
BTW the model is listed as Xiaomi Redmi Note 8 RAM 4GB ROM 64GB Android 9.0 Versión Global Negro
Thanks in advance :good:
Yes. Nowadays all phones run that I guess, and I can say that this one is no exception.
can anyone help me? my cellphone is stuck in recovery and now I want to flash a Chinese rom so that this cellphone turns on and I want to ubl, but it always gets an error, or is there a firmware link for redmi 6 pro without auth? please share with me
Youll need someone with an authorized Mi account or smth like that.
Hello everybody,
i want to downgrade to OOS11 and take the false Firmware for the wrong Model. I have an Oneplus 9 pro and installed the Oneplus 9 one. Any solution to get my OP9 Pro back ? I tried MSM Download with an error by Param part. Is it possible to flash the OP9 Pro Firmware lokal without verify ? Please help if you can.
Best regards
Speedy
Speedyin2015 said:
Hello everybody,
i want to downgrade to OOS11 and take the false Firmware for the wrong Model. I have an Oneplus 9 pro and installed the Oneplus 9 one. Any solution to get my OP9 Pro back ? I tried MSM Download with an error by Param part. Is it possible to flash the OP9 Pro Firmware lokal without verify ? Please help if you can.
Best regards
Speedy
Click to expand...
Click to collapse
Try MSM tool with "SHA" unchecked and "firehouse" checked... See if that helps.
TheGhost1951 said:
Try MSM tool with "SHA" unchecked and "firehouse" checked... See if that helps.
Click to expand...
Click to collapse
Param preloaf failed , The same error Message, Damn
Try Fastboot method (russian instructions - please use translater)
Hi,
I've spent two weeks to read several thread to try to unbrick my Mi11 with no succes at this time.
The issue has occurred during an update to the last MIUI version : the update script has failed with an error i couldn't see and i have restarted the phone.
I try now to restore it with the lisa_global_images_V14.0.2.0.TKOMIXM_20230109.0000.00_13.0_global ROM downloaded from xiaomi.eu site
1. My tries to restore it with Miflash have failed : I have a message message saying ''ERROR: Only nop and sig tag can be received before authentication"
I don't understand which authentication is requested
2. So i tried using QFIL from QPST :
i have put the phone in edl mode,
the qualcomm drivers are fine,
the smartphone is detected by windows
I have an error about 'Unknown chunk type cac2' so I made several tries with different usb cable or different rom.
Always having an error while processing super.img
So i tried to use this command 'fsutil sparse setflag super.img' in case my version of QPST was too old but still was unlucky (ref : https://forum.xda-developers.com/t/error-unknown-chunk-type-cac2-when-using-qfil-to-flash.4534529/).
3. I made a try with edl tool from http://www.temblast.com/edl.htm but the same error message is displayed:
XML:
<log value="ERROR: Only nop and sig tag can be recevied before authentication."/>
The phone have its booloader unlocked since more than a year but it was the only modification i have done since i bought it
Is there anybody who accept to help me to unbrick my phone ? I'm out of ideas
Thanks in advance
Mins
Hi, i'm very noob in this things, but i think maybe you can try with xiaomi tool v2
This thread is for Mi 11 lite 5G (renoir). You mobile is Mi 11 lite 5G NE (lisa).
You can look at this thread for lisa:
Xiaomi 11 Lite 5G NE
The Xiaomi 11 Lite 5g NE is a 6.55" phone with a 1080x2400 resolution display. The Qualcomm SM7325 Snapdragon 778G 5G chipset is paired with 6/8GB of RAM and 128/256GB of storage. The main camera is 64+8+5MP and the selfie camera is 20MP. The battery has a 4250mAh capacity.
forum.xda-developers.com
Thanks for the advice.
I repost in the right thread
Thanks
I bricked my phone the same way.
I successfully unbricked with Xiaomi King Tool.
You have to buy unlock tokens from some Chinese/Russian unlock sellers. I paid $8 for the tokens.
OR
Easy route: pay for someone to remote in your PC and unlock it.
At this point, too bad so sad, no free solution. Blame Xiaomi
Thanks for your anwers.
I will not pay for something that should be mine.
The phone will go to the trash.
Any advice to buy a new one without theses issues ?
I ve already tested Xiaomi, Honor, Samsung, Nokia : all are locked in the same way.
I can't afford too much in smartphone especially when i break/brick them so often
Which brand should i buy ?
- Mins -
I don't understand why there is so much thread of xiaomi users claiming successfully reflash their phones in edl mode without the same issue thant me ?
The firmware has not the same restriction in all countries ?
I actually have to do mine at the store. You need to find a professional team that will do EDL flash offline for you. Otherwise, some random Indian Telegram that might scam you. Or replacing the whole motherboard are the last options