Related
Hi everyone.
Didn't see a thread for screen protectors for this tablet, so I thought I would start one. I have the 8.0 inch tablet, and a glass screen protector from amFilm that works very well; no issues with halo or anything like that. If you have one that is good for either size, please share so that we can be sure to all get the best products!!
I like mine without any screen protectors ☺
...
Here's the original thread. http://forum.xda-developers.com/showthread.php?t=3198971
Verstuurd vanaf mijn SM-T710 met Tapatalk
Bought the tech gear one for my 9.7, can't fault it and very nicely packed and supplied everything you need.
Sent from my SM-T810 using Tapatalk
Got a Skinomi glass for mine S2 9.7.
joking said:
Got a Skinomi glass for mine S2 9.7.
Click to expand...
Click to collapse
Seconded. I tried two of... I forget the brand; it's the #1 seller or Amazon and starts with an I and both had problems. Then I got a Skinomi and it's perfection :good:
Bought Omoton for my 8".
Best packaging of any I've used, very complete.
They also have 2 hinges that make putting it on much easier.
Had a few air pockets at first but with a some pressing and pushing toward the edges they have gone.
Only negative is that I have the telephone model and they didn't have a cut out for the top speaker.
As I don't think I'd hold this up to my heard and rarely use the phone (and when I do it's blue tooth direct to my hearing aids or by speaker) it's not a problem.
Shofar
I made a few purchase from china, 2.5D , cost me approximate USD 2.40 each.
does what it suppose to do, had it on since I've had my tab, I have the 4G version, the protector has all the cut out.
Any more updates on screen protectors? I have installed Tech Armor Ballistic Glass on 10 or so devices, always very pleased with them and their service, but they don't offer a Tab S2 yet.
Looks like Skinomi it is, appears pretty similar to the TA. Hopefully just as oleophobic.
I'm happy with my Skinomi. I don't notice fingerprints on it at all.
Sent from my SM-T710 using Tapatalk
gmaugham said:
I'm happy with my Skinomi. I don't notice fingerprints on it at all.
Sent from my SM-T710 using Tapatalk
Click to expand...
Click to collapse
The Skinomi Glass arrived, it's a quality surface, but my application failed on one corner, got a ~ 1/4 inch bubble on the bezel. I've installed a lot of Tech Armors phone and tablet glass protectors, I can usually get it right 9 out of 10 times.
Tech Armor always sends a replacement if you mess it up, but they don't make a Tab S2 yet. Skinomi warranty says it does not cover incorrect installations. Ordered another one and also emailed Skinomi CS asking for another one anyway.
Not many cases for this tablet... Too bad Spigen or Seidio don't make one yet. The Tab S2 is just a little too thin naked for me to hold comfortably.
Is there other screen protector? I live in Austria and there are not these brands here...
Thank you!
Does anyone know if these Samsung branded screen protectors work on the Tab S2 8'?
Galaxy Tab 3 8 inches and Galaxy Tab 4 8 inches .
I can only find generic tempered glass screen protectors and I'd rather go with one of these two for now.
Rm4n said:
Does anyone know if these Samsung branded screen protectors work on the Tab S2 8'?
Galaxy Tab 3 8 inches and Galaxy Tab 4 8 inches .
I can only find generic tempered glass screen protectors and I'd rather go with one of these two for now.
Click to expand...
Click to collapse
Link below for you made for tab s2 8.0. You can try ebay as well.
http://www.aliexpress.com/wholesale...sung+galaxy+tab+s2+8.0+screen+protector+glass
OnceHeaven said:
Link below for you made for tab s2 8.0. You can try ebay as well.
http://www.aliexpress.com/wholesale...sung+galaxy+tab+s2+8.0+screen+protector+glass
Click to expand...
Click to collapse
Thanks a lot. I'll see what I can get shipped to Romania.
Could someone confirm that the "old" and the new model's front panel are the same? Would like to buy a screen protector to a 813 model but i'm not sure if it's exactly the same on the front like the 810. Is the camera module, the light sensor, and the home button at the same position and are the same size? (i would assume so, but you never know)
joelbnyc said:
The Skinomi Glass arrived, it's a quality surface, but my application failed on one corner, got a ~ 1/4 inch bubble on the bezel.
Click to expand...
Click to collapse
If found that bubbles at the edges are almost always caused by the protector being to close to that edge. The only way to get rid of the bubble is to completely remove the protector and re-position it.
I had bought these: http://www.aliexpress.com/item/T815...2624571978.html?spm=2114.13010608.0.58.V2jpEY.
I applied one of them with no problem. I have two or three tiny bubbles that were caused by specks of dust that crept in despite my effort to prevent it.
As titled.
Does the note 10 + come with a preinstalled screen protector?
I believe the s10 came with them.
I was told it does just like the s10. No case though(only international)
Yes, saw on YouTube video. It comes with preinstalled screen protector. In indian units transparent back cover is also included.
Thats what i heard but some unboxing didnt say anything.
Just looking for something for day one.
I ordered a case with built in protector. Just dont know if the screen protector will work with the fingerprint
https://eu.community.samsung.com/t5...reen-protector-on-the-Note-10/m-p/1264988#M63
How could we know for sure?
people who have used s10 or s10+ any idea how is the quality of factory installed screen protector? those who have installed new screen protector did you install on top of factory installed screen protector or you removed the factory installed screen protector and then apply the new one?
shah_vm said:
people who have used s10 or s10+ any idea how is the quality of factory installed screen protector? those who have installed new screen protector did you install on top of factory installed screen protector or you removed the factory installed screen protector and then apply the new one?
Click to expand...
Click to collapse
I have a S10+ that came with one and while the fitment was perfect it wasn't much thicker (if any) than the plastic that you peel off the back. I don't use screen protectors so as soon as the cutout for the front facing cameras started bugging me when I would pull the notification shade down I took it off (maybe two days of owning the phone).
Generally when applying a new screen protector you would take any existing ones off first.
It does.
Sent from my Pixel 3 XL using Tapatalk
shah_vm said:
people who have used s10 or s10+ any idea how is the quality of factory installed screen protector? those who have installed new screen protector did you install on top of factory installed screen protector or you removed the factory installed screen protector and then apply the new one?
Click to expand...
Click to collapse
I had no issues with mine. Got S10+ on release day and used it up until a month ago and replaced it with ringke dual easy film. Was not a bad screen protector at all I'll probably rock the factory one in note again for awhile until it's worn out
Good to know.
I always order a skinomi as i always do. Just unsure if it will come before the phone.
There shipping can be a tad slow
It is difficult to find screen protector with curve glass. I had changed so many tempered glass for my s8+.
Another issue is the fingerprint sensor. Is there any screen protector that doesn't block the fingerprint sensor?
torickray said:
It is difficult to find screen protector with curve glass. I had changed so many tempered glass for my s8+.
Another issue is the fingerprint sensor. Is there any screen protector that doesn't block the fingerprint sensor?
Click to expand...
Click to collapse
Whitestone ..pricey tho
https://www.mobilefun.co.uk/eiger-3d-samsung-galaxy-note-10-glass-screen-protector-clear-74279
Has fingerprint scanner cutout.
Sent from my Samsung SM-N960F using XDA Labs
https://www.youtube.com/watch?v=ajQ0p_nDOGk
MKchrias said:
https://www.mobilefun.co.uk/eiger-3d-samsung-galaxy-note-10-glass-screen-protector-clear-74279
Has fingerprint scanner cutout.
Click to expand...
Click to collapse
That would get annoying as hell real quick. Every time you moved your finger over the cutout.
shah_vm said:
people who have used s10 or s10+ any idea how is the quality of factory installed screen protector? those who have installed new screen protector did you install on top of factory installed screen protector or you removed the factory installed screen protector and then apply the new one?
Click to expand...
Click to collapse
I have found the screen protector on the S10 plus I have is great. Still looks the same as it did out of the box.
I didn't use a screen protector on my S9 plus and I had no issues with scratches or anything. Only reason I left this one on I figured if it bubbled or came off I would just remove it and go with nothing.
Sent from my SM-G975U using Tapatalk
Is there any phone these days that doesn't come with a screen projector installed?
Hubird said:
Is there any phone these days that doesn't come with a screen projector installed?
Click to expand...
Click to collapse
Yes, OnePlus 7 Pro bought from T-Mobile.
---------- Post added at 01:36 PM ---------- Previous post was at 01:29 PM ----------
shah_vm said:
people who have used s10 or s10+ any idea how is the quality of factory installed screen protector? those who have installed new screen protector did you install on top of factory installed screen protector or you removed the factory installed screen protector and then apply the new one?
Click to expand...
Click to collapse
Anyone interested to see the quality of the screen protector on the Note 10+ at the 6:40 mark he takes the screen protector off and you can see how cheap it is.
Yes, it does come with a screen protector installed.
However, the pre-installed protector is nowhere as good as the ones available online. it is prone to get scratches easily. So, I recommend you get one to protect your phone.
Lord AJ said:
Yes, it does come with a screen protector installed.
However, the pre-installed protector is nowhere as good as the ones available online. it is prone to get scratches easily. So, I recommend you get one to protect your phone.
Click to expand...
Click to collapse
Yes but then the fingerprint sensor goes very bad.
I bought a Huawei Mate Xs about 30 days ago. Unfortunately, the manufacturer screen film protector is becoming increasingly unglued with every time I bend/fold the screens. It is unpeeled with the vertical length of the in-between area where both screens fold.
Due to the bends of screens, the thin screen film layer stretched and create a tubercle effect. From what I can see, this is an engineering fault as I was very careful with my Mate Xs.
I contacted Huawei UK and they told me to simply take off the film screen. I am doubtful of that as it wasn't said by a technician but rather by the normal customer service rep. I remember reading somewhere online that people shouldn't take off that screen film protector as it will make the phone way more vulnerable to scratches and other damage.
Please let me know if any of you know if it is okay to take off the thin film layer as Huawei wasn't very responsive to this issue.
Elmar1801 said:
Finally Huawei has new Screenprotectors and is able to apply without bubbles etc. Let's see how long they work.
Click to expand...
Click to collapse
Do you have the link for it
I think he's talking of Huawei's repair centers being able to correctly repair them now if you send your device in, not something you can buy yourself.
kilrah said:
I think he's talking of Huawei's repair centers being able to correctly repair them now if you send your device for repair, not something you can buy yourself.
Click to expand...
Click to collapse
That's correct. Was there in Düsseldorf for the repair.
It tells you at like 3 different places on the packaging and during the setup process to never remove it.
Send it for warranty repair.
I had the exact same problem , i did send it back , waiting for the new one , I’m sure it will do it again , i will sell the mate xs when i get it
I had the same problem after a week of use. I peeled it off and use it since that and it's a way better experience, so I am not gonna have it replaced for sure.
I had the exact same issue was not advised to take screen protective film off, awaiting pick up from DPD
I have the same issue.
Only problem is that I live in the US, and imported my phone from Australia.
Any advice would be much appreciated
rcs1000 said:
I have the same issue.
Only problem is that I live in the US, and imported my phone from Australia.
Any advice would be much appreciated
Click to expand...
Click to collapse
Buy new screen protector from eBay or aliexpress and then you can peeled off the original protector because we can remove original screen protector since it's not glued.I do this in my mate xs without any problems
What new screen protector? Most are too rigid to bend correctly
kilrah said:
What new screen protector? Most are too rigid to bend correctly
Click to expand...
Click to collapse
I buy this one, in fact it not easy to apply. For me I dispos 2 before successfully applying
#Aliexpress US $4.99 20%OFF | for Huawei Mate X Screen Protector IMAK Hydrogel III 0.15MM Soft TPU Protective Film for Huawei Mate X 5G Not Glass
https://a.aliexpress.com/_d6Fhv2F
Note : the pictures above to proof the original mate xs screen protector its not glued to main device screen
Thanks, just ordered 4. Hadn't managed to find anything but didn't think of aliexpress for some reason...
kilrah said:
Thanks, just ordered 4. Hadn't managed to find anything but didn't think of aliexpress for some reason...
Click to expand...
Click to collapse
you're welcome
We await your experience by placing the protector on the phone screen
Sure, you will be better than me to install the protector ..... LOL
alizwiniy said:
I buy this one, in fact it not easy to apply. For me I dispos 2 before successfully applying
#Aliexpress US $4.99 20%OFF | for Huawei Mate X Screen Protector IMAK Hydrogel III 0.15MM Soft TPU Protective Film for Huawei Mate X 5G Not Glass
https://a.aliexpress.com/_d6Fhv2F
Note : the pictures above to proof the original mate xs screen protector its not glued to main device screen
Click to expand...
Click to collapse
I've ordered it, thanks!
Hi
I ordered from protect film based in Germany, quality bendable glass's protector, much better than all cheap ones
Protectfilms24.com
Doesn't seem to be "bendable glass", but just 2 separate flat pieces that leave the bend unprotected. Not a fan, probably looks trash when unfolded too with those 2 rectangles.
Huawei Switzerland
Surprise yesterday morning. Get a new one next Monday.
Elmar1801 said:
Surprise yesterday morning. Get a new one next Monday.
Click to expand...
Click to collapse
This is best Huawei can do. Maybe I will get a new screen.
Service
Elmar1801 said:
This is best Huawei can do. Maybe I will get a new screen.
Click to expand...
Click to collapse
Mate that's shocking service, best just buy one from mobile fun and apply yourself
prospects said:
I had the exact same problem , i did send it back , waiting for the new one , I’m sure it will do it again , i will sell the mate xs when i get it
Click to expand...
Click to collapse
Did you get it replaced? I'd like to buy it off you.
Hi guys,
Update on my Mate XS
So the film did peal from the top of the screen, so got it picked up like my earlier post however it got sent to SBE repairs in the UK. Now this phone was less then a month old. It came back with deep scratches on the screen and with the hinge not feeling great. So away it went again to be returned this time with a bad dimple along the middle when unfolded again not feeling right. So 3 step in and I get a brand new handset.
All good so far however I did notice on this one it had a card in the box saying '' LEAVE PHONE IN UNFOLDED POSITIONS IF LEFT FOR LONG PERIODS'' could this be why they start to peal as they are shipped open in the box? is this the reason for the scree peel?
Anyway what are your guys thoughts?
Arron
I think I've only seen one of them on Amazon so far (this one). It looks like it might be fine - but I'm not sure $36 is where I want to be. I'm hoping we'll see some more options pop up soon.
Anyone seen anything else yet?
I'm really thinking I want something on there considering that the Flex Mode will basically be resting on the screen side whenever you use it (or you'd get a wobble on the cameras).
Whitestone just came out with one on their website.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
ninja4hire said:
Whitestone just came out with one on their website.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
Click to expand...
Click to collapse
Thanks, just purchased with the discount code Newproduct20. It was $36. I love it on my Note 10, so I'll give it a try.
So I’m assuming the stock screen protector has to be removed for the Whitestone?
The outside screen protector is no problem. It's the inner one they caution against removing.
StormCell said:
The outside screen protector is no problem. It's the inner one they caution against removing.
Click to expand...
Click to collapse
I chickened out. I cancelled the Whitestone one. I will leave it as is for a while. The Whitestone install video looks pretty complicated. I will see other reviews first. Feel like if I take off the pre installed one I might be sorry.
That video is pretty intense.
I see Verizon has a screen protector. I hope a better quality one becomes available.
lynseyw said:
I chickened out. I cancelled the Whitestone one. I will leave it as is for a while. The Whitestone install video looks pretty complicated. I will see other reviews first. Feel like if I take off the pre installed one I might be sorry.
Click to expand...
Click to collapse
If it has a factory installed protector on it, leave it on until it wears out. They provide better protection than you might first think.
Ha-ha I "tested" the one on my 10+ the 2and day I had it and faceplanted it on a rough piece of 1/16th inch aluminum angled upwards.
Marred the protector but no damage to the screen... it hit on the curved glass area, hard.
Sand will scratch these screens.
I would lean towards a wet apply urethane screen protector as they are durable, remain clear, fairly easy to apply, bubble free, self healing and are inexpensive.
Been having a good run with Gorilla IQ Sheild on my 10+. Bought 4 three months ago and still on the first one. Shows some wear on the keypad area but no scratches and I'm not babying it. Similar in feel to the factory installed protector.
ninja4hire said:
Whitestone just came out with one on their website.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
Click to expand...
Click to collapse
Do you know if this is necessary on the fold 2? The only reason I buy whitestone tempered glass for my samsung phones is because the screen is curved and whitestone makes the best glass for curved screens. If the z Fold 2 doesn't have a curved front screen, then I think most tempered glass screen protectors should work.
So I guess my main question is, does the z fold 2 have a curve to the front screen?
lynseyw said:
Thanks, just purchased with the discount code Newproduct20. It was $36. I love it on my Note 10, so I'll give it a try.
Click to expand...
Click to collapse
The screen protector is for the outer screen, you dont need a protector for inside screen. Whitestone is a good company, sadly the code did not work for me. Did anyone get lucky yet?
mmafighter077 said:
Do you know if this is necessary on the fold 2? The only reason I buy whitestone tempered glass for my samsung phones is because the screen is curved and whitestone makes the best glass for curved screens. If the z Fold 2 doesn't have a curved front screen, then I think most tempered glass screen protectors should work.
So I guess my main question is, does the z fold 2 have a curve to the front screen?
Click to expand...
Click to collapse
Sorry just saw your question. Yes the z Fold 2 has one side of the front screen slightly curved. The side that opens to be specific.
Whitestone code no longer works. As soon as people started using it they yanked it.
Anyone using the Whitestone protector? They're sold out.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
StormCell said:
Anyone using the Whitestone protector? They're sold out.
https://www.whitestonedome.com/products/galaxy-z-fold2-dome-glass-tempered-glass-screen-protector
Click to expand...
Click to collapse
Its great.. need to get a front cover thouvh..
blkghost22 said:
Its great.. need to get a front cover thouvh..
Click to expand...
Click to collapse
Still need a cover with the screen protector?
StormCell said:
Still need a cover with the screen protector?
Click to expand...
Click to collapse
Because of the edges of the glass. I can feel the edges when playing games
Just received the Whitestone screen protector and installed it. It lined up perfectly with the hole punch camera, but doesn't quite cover the entire front glass. Had no adhesive dribble out on to my phone. But, did have to move the holder around to get the adhesive to fully disperse. I'm now just hoping that the first case I put on (when one of the five I ordered arrives), doesn't break the screen protector.
CP Conductor said:
Just received the Whitestone screen protector and installed it. It lined up perfectly with the hole punch camera, but doesn't quite cover the entire front glass. Had no adhesive dribble out on to my phone. But, did have to move the holder around to get the adhesive to fully disperse. I'm now just hoping that the first case I put on (when one of the five I ordered arrives), doesn't break the screen protector.
Click to expand...
Click to collapse
Mines on the way. Pic, please
Does anyone know if any of the screen protectors on this link are actually glass, and if they are any good ? Thanks.
protectionfilms24.com/c/tempered-glass-screen-protectors/samsung-galaxy-z-fold-2/
I know there is already a screenprotector on inside big display. Im wondering if we can apply another one on top it. Case last year oleophobic coating on my fold 3 weared of after 3 to 4 months it was so rash or hard to touch and not smooth anymore. So this time thinkinf of applying another layer on stock one so that i can chamge it every 4 or 5 months to keep it smooth and clean
So is it possible? Does anyone have good screen protector suggestions? I purchased the below and for inside screen
https://amzn.eu/d/hEUw6Xa
If you did apply another screen protector(sp) on top of the current one, it would just come off with current sp. Basically what I'm saying is if and when it wears down; either buy another sp or send it to samsung for a replacement. Have had several sp with my fold 3 2 being actual glass and 2 film. Which whitestone kept making the glass one because that felt way better than the film but both eventually broke
Sonin66 said:
If you did apply another screen protector(sp) on top of the current one, it would just come off with current sp. Basically what I'm saying is if and when it wears down; either buy another sp or send it to samsung for a replacement. Have had several sp with my fold 3 2 being actual glass and 2 film. Which whitestone kept making the glass one because that felt way better than the film but both eventually broke
Click to expand...
Click to collapse
i dont think samsung will replace the screen protector? is that even possible?
eswar539 said:
I know there is already a screenprotector on inside big display. Im wondering if we can apply another one on top it. Case last year oleophobic coating on my fold 3 weared of after 3 to 4 months it was so rash or hard to touch and not smooth anymore. So this time thinkinf of applying another layer on stock one so that i can chamge it every 4 or 5 months to keep it smooth and clean
So is it possible? Does anyone have good screen protector suggestions? I purchased the below and for inside screen
https://amzn.eu/d/hEUw6Xa
Click to expand...
Click to collapse
I have buy my Fold 4 and there isn't screenprotector in all display!
alesscam said:
I have buy my Fold 4 and there isn't screenprotector in all display!
Click to expand...
Click to collapse
There is a SP on inside screen but not on the outsode screen
[9-in-1] Milomdoi for Samsung Galaxy Z Fold 4 5G Screen Protector [3 Pack Inside and 3 Pack Front] with 3 Pack Tempered Glass Camera Lens Protector with Mounting Positioner Accessories No bubbles https://a.co/d/gMDZUYH I bought this one when I had my z fold 3 but I got the z fold 4 now so it's best one I ever bought they very good
eswar539 said:
There is a SP on inside screen but not on the outsode screen
Click to expand...
Click to collapse
In my fold 4 no in and no out
alesscam said:
In my fold 4 no in and no out
Click to expand...
Click to collapse
If it's brand new there is one on the big screen ... use your nails to feel it, it start where the pixels start
so the Fold3 came with SP on outside and inside screen, so there isn't one on the outer of the Fold4?
update: just looked at mine closer, doesn't have one on the cover display..........will have to buy one
L1N3B3CK said:
If it's brand new there is one on the big screen ... use your nails to feel it, it start where the pixels
Click to expand...
Click to collapse
L1N3B3CK said:
If it's brand new there is one on the big screen ... use your nails to feel it, it start where the pixels start
Click to expand...
Click to collapse
I know this mate ... but there isn t!
ycats said:
so the Fold3 came with SP on outside and inside screen, so there isn't one on the outer of the Fold4?
update: just looked at mine closer, doesn't have one on the cover display..........will have to buy one
Click to expand...
Click to collapse
Get the spigen one. Its good and comparable with spigen cases
For those asking saying there isn't a screen protector on the large screen, that's incorrect. In Comparison to the Fold 3, on the Fold 4 the screen protector stretches under the board of the display make sure it doesn't peel off at the corners like a common problem with the Fold 3.
I don't believe this is correct. I have my Fold 4 and I can see the edges of the SP the whole way around the inside screen
eswar539 said:
I know there is already a screenprotector on inside big display. Im wondering if we can apply another one on top it. Case last year oleophobic coating on my fold 3 weared of after 3 to 4 months it was so rash or hard to touch and not smooth anymore. So this time thinkinf of applying another layer on stock one so that i can chamge it every 4 or 5 months to keep it smooth and clean
So is it possible? Does anyone have good screen protector suggestions? I purchased the below and for inside screen
https://amzn.eu/d/hEUw6Xa
Click to expand...
Click to collapse
You can add a screen protector on the inside cause it is getting scratched easily, so an extra layer of the protector is not an issue cause I use Gadgetshieldz protector on mine and I have no issues with touch sensitivity, also this protector can self-heal the scratches that occur on it!
nancymary101 said:
You can add a screen protector on the inside cause it is getting scratched easily, so an extra layer of the protector is not an issue cause I use Gadgetshieldz protector on mine and I have no issues with touch sensitivity, also this protector can self-heal the scratches that occur on it!
Click to expand...
Click to collapse
Others saying when we try to remove the gadgetshieldz protector the one applied by samsung will also gets removed. Is that true?
Also read reviews about gadgetshieldz protector will have problems at crease. After few fold it will have a line shown etc. Have u applied it on fold 4? How many did u left it unfolded inorder it to bond good?
eswar539 said:
Others saying when we try to remove the gadgetshieldz protector the one applied by samsung will also gets removed. Is that true?
Also read reviews about gadgetshieldz protector will have problems at crease. After few fold it will have a line shown etc. Have u applied it on fold 4? How many did u left it unfolded inorder it to bond good?
Click to expand...
Click to collapse
No, I had this screen protector on my Fold 3 and was using it for more than 7 months then I peeled off the protector for exchange and the one applied by Samsung didn't come off!
The cut-out is good so no problem at the crease also there was no line shown in the middle of the display where it folds. I applied it and left it for 2-4 hours as instructed in the package and then it stuck well to the screen!
{Mod edit: Links to Gadgetshieldz are not allowed as commercial promotions! Oswald Boelcke}
eswar539 said:
Get the spigen one. Its good and comparable with spigen cases
Click to expand...
Click to collapse
I took off the Spigen one. I found it a bit too small and all the dust stuck on the edges of it got to me. Using some cheaper off brand one that covers the screen more fully and loving it much more. Also black edge at the end of screen protector is nice too no more staring at dust at the edges of the screen protector like I had to see on the spigen one.