Hi guys ! With the help of the software in the body computer , I changed the region of the car . The language I need has appeared in the radio. But at the same time , the uconnect box error appeared on the display . Has anyone encountered ?
hi, what error did you get and what sw did you modify the BCM with?
Related
Hello ! Good morning everybody !! I have tried to make a firmware upgrade to my ETEN P700, but I've loaded only the first part of the software PKHer_217.nbo. Then the phone told me " everything ok , so I switched it off, but now the phone doesn't work anymore. I got only a blank screen or neither that. Could anyone help me ? I'm practical in electronic, so I can make many things, such bridges, new cables, external supply and so on . Please HELLLPPPP !!!!!!
Dear Friends ,
I have purchased a new HTC TYTN II unit and i have checked the HTC website and found that there is some ROM upgrade avialable(RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.32R2_Ship
So i have downloaded that and tried to install it on my device. The installation was cool , it covered 100 % ,but at the end there was a error message on my PC " Error 270 -update error -image file corrupted " and my device continuously shows " KAIS130, SPL-1.93.0000,CPLD-8 " and there is 4 colour bars on the device.
I have tried the reinstallation - but no use , tried soft/hard reset - no use .
So kindly help me to solve the issue.
Regards,
Jerry
E Mail : [email protected]
Please i have problem in my device KGL . The problem is the bluetooth mic not work after i upgraded to latest malysk firmware . When i checked the default factory setting . I found that the default application for BT is BC6 this is the defult for me and bluetooth was working fine in this driver . After the firmware upgrade bluetooth mic not work . The only way the mic work is to change the BT application to BC6B and in this case the sound is very bad and low . I dont know is it MCU problem or what? My mcu version is KGL 2.83 i tried to downgrade to 2.80 but no change . So please how can resolve this problem
Malaysk has stated before not ever firmware is compatible with every unit what work before might not work if upgraded to the newest version. I am on the latest version and have 0 issues.
Sent from my SM-N910T using Tapatalk
I know . I just need to know how i solve this problem now . I changed the rom to the previous one and still the same problem
I suppose the question is.. did you upgrade the MCU at the same time as the Rom?
What MCU and Rom where you on before you upgraded to the new versions..?
If you have documented this..then try to go back to that same setup and see if it all works.. note if you do this I suggest full wipes..
The other thing you are saying here is that you don't have an option to choose the Bluetooth settings that you where using before..?
If this is correct you can only hope that reverting back to original setup will allow you to choose this setting again..
Then this all points too.. not every machine is going to behave as they should on upgrades..
The variables are.. MCU settings..which no one has cracked yet due to no source..
And the way it interacts with the Android base..
As a note; I haven't touched my MCU..and was able to access my bluetooth settings that I had before..I need to check the pic I posted as I have them in there..
Now i found the problem but dont know how to solve it . My Bluetooth Module:BC6 Stereo Module,A2DP . In the factory setting when i choose BC6 mic not work . When i choose BC6B mic work but with very bad voice . Befor this problem happend the defult setting for bluetooth is BC6 and mic was work perfect with it . So any help ?
Hi everyone. I'm new here !
First, sorry for my english ! I'm french and i try to explain my problem in english... If there is a french discussion, i didn't find it
I've installed an android system in my car (Toyota Yaris)
I'm searching for the Car factory setting code to open the setting for personal setting
I tried " 126 " but it's a four figures code.
I don't know which brand it is.. I found some numbers here but nothing happen, nothing is working :crying:
I took pictures if something can help you about the machine but i can't publish them yet but i've links.
Thanks for trying to help me.
TorvicGall said:
Hi everyone. I'm new here !
First, sorry for my english ! I'm french and i try to explain my problem in english... If there is a french discussion, i didn't find it
I've installed an android system in my car (Toyota Yaris)
I'm searching for the Car factory setting code to open the setting for personal setting
I tried " 126 " but it's a four figures code.
I don't know which brand it is.. I found some numbers here but nothing happen, nothing is working :crying:
I took pictures if something can help you about the machine but i can't publish them yet but i've links.
Thanks for trying to help me.
Click to expand...
Click to collapse
Try 7890
Developper mode asked password
My Honda Civic 2016 (Canadian version) asked me a password to activate the Developper mode. Any one here had the same issue, i have done a complete reset of the system to default and still the same things.
To be clear, after tapping 7 time on Build number, the popup appeared.
My Android Version is 4.2.2 Build: 1.F186.67 and Model number: MY16ADA
Pls help !!
zahurkho said:
My Honda Civic 2016 (Canadian version) asked me a password to activate the Developper mode. Any one here had the same issue, i have done a complete reset of the system to default and still the same things.
To be clear, after tapping 7 time on Build number, the popup appeared.
My Android Version is 4.2.2 Build: 1.F186.67 and Model number: MY16ADA
Pls help !!
Click to expand...
Click to collapse
Try 123456 or 7890
zahurkho said:
My Honda Civic 2016 (Canadian version) asked me a password to activate the Developper mode. Any one here had the same issue, i have done a complete reset of the system to default and still the same things.
To be clear, after tapping 7 time on Build number, the popup appeared.
My Android Version is 4.2.2 Build: 1.F186.67 and Model number: MY16ADA
Pls help !!
Click to expand...
Click to collapse
Got the same car. And same issue.
Funny enough the Developer Mode prompt for a passcord. Probably a typo I guess.
Anyway have you found a way to enable it?
Hi all ,
i ' ve a redmi note 8T xiaomi phone ,
when i connect it via USB on my computer ( raspberry pi 3B with raspbian buster ) , after a moment , appears an android system message saying : " erreur partage USB " google tanslate this as : " USB sharing error " .
after this message appeared , the internet connection become unstable and disconnet periodically ...
At home , i can't have an ADSL VDSL or fiber connection , the only way i can have internet is 3G/4G or satellite ...
so it's a very boring problem for me !
i have two others smartphone , my old is a redmi note 5 and all is working fine .
My wife has a a redmi note 5 too and all is working fine too .
So it seems it can be a problem with my phone or android version in use on my phone or muiu version on my phone .
miui v 12.0.02 and android 10 .
i ' ve activated debug mode USB , but the message still appears
the phone is in version stock , all packages and android OS are up to date .
Someone can helps me with that please ?